Calendar Alarm stopped working

Hello,
I'm facing a problem with the tasks alarm after I updated the software of my N900 to 10.2010.19.1.
When I set a new task with alarm, the alarm disappears whenever I restart the device.
This is killing me as I have so many tasks and I have to enable their alarms everytime I restart the device!
Any help?

Hello,
I'm facing a problem with the tasks alarm after I updated the software of my N900 to 10.2010.19.1.
When I set a new task with alarm, the alarm disappears whenever I restart the device.
This is killing me as I have so many tasks and I have to enable their alarms everytime I restart the device!
Any help?

Similar Messages

  • My Iphone4 alarm stopped working since last two days. Is it the same issue which cropped up on Jan 1 2011? What is the way out?

    my iphone4 alarm stopped working since last two days (31.12.2011). is it the same issue that cropped up last year on 1.1. 2011? what is the way out? and who should i turn to for support?

    This issue was fixed in iOS5 - what is yours running?

  • Calendar suddenly stopped working

    My calendar suddenly stopped working and all my appointments have been deleted. Have upgraded to iOS 8.1. Any help appreciated! Thanks.

    iOS 8.1 Calendar Issue
    All calendar entries disappear.
    Easy fix:
    Open Calendar App
    Tap "Calendar" at bottom
    Tap your calendar so a Checkmark appears next to it.
    Tap "Done"
    All of your calendar entries will reappear.

  • My calendar has stopped working, it either doesn't open at all (tap on it and it appears to opn but closes straight away) or if it does open when I try to change dates, it closes itself. t

    My calendar has stopped working. It either doesn't open at all (tapping on it it flashes on screen and closes straight away), or if it does stay open, eh. I try to change date or closes. Extremely frustrating. I have loads of entries in my calendar that I now can't access.

    Have you tried closing the Calendar app via the multitasking bar and seeing if it works when you re-open it ? Double-click the home button to open the taskbar, and then swipe or drag the Calendar app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
    If that doesn't fix it then you could try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Calendar just stopped working; it just freezes

    Calendar just stopped working. It just freezes, but the rest of the phone works fine! How do I get the calendar back up and running? I have all kinds of info that I need and don't want lost!

    you just connect ur bb to the pc and do the backup. It will backup all ur data that you have. Did you already sync your data to your email?if you already done that . Justr restore again all your data on your  device.

  • Calendar sync stopped working: "Unable to process organizer data"

    I'm trying to help a consulting client whose Blackberry Q10 stopped synchronizing calendar data 5 days ago. It looks like that's the only thing he synchronizes with his desktop. I've tried looking up answers, but I've found very little information about this problem, and the few suggestions I found have not worked.
    Phone: Blackberry Q10
    Model#: SQN100-2
    Software Release: 10.1.0.4189
    Blackberry Link Release: 1.2.1.31
    Symptoms: After clicking on the Sync Contacts/Calendar button, Blackberry Link sits for a very long time on the "Syncing your contacts and calendar appointments. Do not disconnect your device." screen, with sporadic activity on the progress meter, before being returned to the Sync Contacts and Calendar Appointments screen. In the lower left, a warning message "Sync was unsuccessful" is displayed. When I click the Show Recent Activity link under that, a Recent Activity screen that repeats "Sync was unsuccessful" along with a second message, "Unable to process organizer data" appears.
    Is there a way to resolve this short of restoring the phone to factory defaults? The calendar data on my client's phone has now gone 5 days without being synced, and he doesn't want to lose the latest changes.

    HipsterZ10, I didn't mean to suggest that you aren't entitled to gripe, only that doing so in response to a post on a community support forum isn't particularly useful. (Do BlackBerry support teams even monitor this forum?)
    You sound like someone who knows his way around BlackBerry very well, and I would love to do some brainstorming with you if you're so inclined. I have nowhere near as much BlackBerry experience as you have, but I have worked in many areas of computing support for over 25 years. I'd like to think that between the two of us - plus anyone else who can chime in with something constructive - we can come up with something that helps us all out,.
    With that in mind:
    You've tried uninstalling and reinstalling without success. Did you just uninstall and reinstall the latest version of BlackBerry Link, or did you try uninstalling the latest version and going back to one that used to work? (Or did you try upgrading because the previous version stopped working?)
    Did you try any direct edits to the Registry to clean out any BlackBerry settings that the uninstall program might've left behind? Uninstallers are often not kept up to date as software developers make changes to software, so they often leave digital detritus in the Registry. This usually has no effect on anything else, but can prevent software that was uninstalled from working properly when it's reinstalled.
    You also mention that you've tried a lot of settings changes. Would you please share with us the settings changes that you made?
    I know from other companies' devices that updates to the Windows software is sometimes accompanied by firmware or programming changes on the device. Does anyone know if that's the case for BlackBerry Link updates? If it is, then simply uninstalling BlackBerry Link may not be enough.
    Have you been unable to sync only the calendar, or your contacts as well? (I don't know what else BlackBerry Link can synchronize.) My client has only been trying to sync his calendar. If the problem is confined to calendar sync, is there maybe a cleanup procedure that needs to be run on the device or on the Windows side to clean up old appointments every now and then? I know of other products that will fail to sync their calendars if there's too much old data.
    Finally, does BlackBerry Link just sync the BlackBerry device with itself, or does it sync it with Outlook? That wasn't clear to me the last time I was in my client's office; he uses Outlook 2003, but I wasn't certain if BlackBerry Link was connected with it in any way. Come to think of it, my client also uses Windows XP, which does not come with the .NET framework by default. Some commercial software depends on particular versions of the .NET framework, and I've seen situations in which Microsoft updates to the .NET framework breaks 3rd party software. Does BlackBerry require .NET, and, if so, does it try to install the version it needs? To sum these things up, we could be looking at lack of support for older versions of Windows, Outlook  or the .NET Framework.
    Those are some ideas; let's see if we can narrow down the list. I should be back at my client's office on Monday, but if anyone else has time to try any of this today, kindly post what you discover here.

  • Calendar Reminders-​Stopped Working

    I have the 8330 Curve.  Recently, my calendar reminders have stopped working.  I use Groupwise (GW) email and MANUALLY sync my BB.  I still get the reminders in GW, but no longer get them for any new appointments that are coming across.  Is there anything that I need to check?  I can't seem to figure this out....
    Curve 8330
    OS-4.5.0.77
    PIN-303214cd

    Try to reset the device by removing the battery for 30 seconds and replace it. See if any reminders come across
    If you go to create a new appointment and scroll down to the reminder field, does it say none or 15 mins? If you go into the Calendar Options what is your default reminder set to?
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • Ipod alarm stopped working

    I had been using the alarm feature (plugged into speakers with a selected playlist) since I got my ipod in december, and last week it just stopped working. I double checked the time settings, alarm settings, volume on the ipod and the speakers, the speakers work fine, I'm lost on troubleshooting. I've checked it repeatedly and it still hasn't worked about 4 or 5 times. any tricks or suggestions out there?

    Try resetting it (hold switch on and off then hold down the menu and select button for about 5 seconds). If this doesn't work you may have to connect it and restore it.

  • My calendar has stopped working

    The calendar on my G4 has stopped working. I no longer see what has been added and i can no longer add anything else. Looked on here and followed some suggestions for similar questions - went into privacy to make sure no apps were using my social calendar,  changed back to old apple id i used previously. I had previously had to create a new one to resolve other problems.  The calendar does not work using either id.  I don't use icloud and i never have as far as i know. Facetime is not working either. I am at my wits end. It is difficult being organized when you have a busy life but then if the calendar stops working you are baically screwed.

    Have you tried closing the Calendar app via the multitasking bar and seeing if it works when you re-open it ? Double-click the home button to open the taskbar, and then swipe or drag the Calendar app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
    If that doesn't fix it then you could try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Google Calendar alarms not working in iCal when synced via delegation

    If I set up syncing to my shared Google calendars using Google's Calaboration app, I get a half dozen or more "Request Error, Calendar could not be found" messages a day along with the annoying bouncing iCal icon in the dock.
    If I set up syncing via the delegation method — as per Google's general syncing instructions (http://www.google.com/support/calendar/bin/answer.py?answer=99358#ical) as well as this Google Calendar forums thread (http://www.google.com/support/forum/p/Calendar/thread?tid=210c119ea4d2d37e&hl=en) — iCal fails to display event alarms (i.e., the pop-up alert window).
    I need the alarms, so the only thing I can think to do is to tell iCal to sync with gCal less frequently.

    Hi Guys,
    Having something similar here with Google and ical, seems to be related to when using Google Enterprise Apps for me and a third party provider is in use. In this case a SAML provider. It allows me to get to a login page and asks me which Apps I would like to allow to access my Google Calendar. Once I have made my selections and hit ok it then gives me a pop up message saying that authentication has failed. This is strange as I have had to authenticate with Google to be able to access the application sync in the first place.

  • IPhone calendar alarms not working

    I set alarms on events in my calendar, but the alarms don't show up on the screen, nor do they make any sounds.
    Does anyone have any suggestions?
    Thanks!

    why so many views of this question and nobody had replied with an answer?

  • Ringer/Alarm stopped working

    So this is interesting. My ringer and alarms don't play sound anymore. Even after rebooting my iPhone. (Yes, the switch for silent is not on.) Even when I try and assign ringtones, they don't even play the samples.
    Anyone else have this issue or know of a solution?
    I suppose the only thing I haven't done at this point is reset my phone to factory settings in iTunes.

    My speaker phone works just fine. I can make calls, here people everything is fine except that my alarm (kind of annyoing cause I actually use my phone to wake myself up) and the ringer.
    Basically, just the ringtones won't play under any circumstances. Even when I just try and assign ringtones and listen to the preview I get nothing.

  • Calendar has stopped working!

    I have bought a new Macbook and created a new Apple ID in store. I now have 3 apple IDs and don't know  how to delete them so that I only have one which connects my Iphone with my laptop. Since buying the laptop my calendar on my phone doesn't work. I have no idea if the two things are connected but think it must have something to do with Icloud. Can anyone help? I am a complete Luddite when it comes to technology - so need very simple instructions.

    It's the native software, it's not connected to my Facebook and when I've restarted my phone it won't turn on, itgets to about 2/3 loaded and then freezes  

  • In Firefox Yahoo Calendar has stopped working (it does not load) while it works in IE8.

    My Yahoo calendar failed to load in the Yahoo Mail application. I have been using the latest version of Firefox for some time. When I tab from Yahoo mail to the calender the screen, the Calender header appears but otherwise the calender portion of the screen is blank. I use Yahoo mail in IE8 and the calender portion of mail opens correctly. I have reloaded the latest version of Firefox without any change

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Calendar sync stopped working from device to desktop

    I have version 6.0 on my desktop, and a Curve 8520 Blackberry.  Syncing was going fine until last week, when all of a sudden I noticed that after a sync my desktop calendar was almost empty!  Most events had been deleted from there, but thankfully they were all still on my Blackberry.  Since then any calendar event I enter on my Blackberry does not get synced to my desktop, but anything I enter on my desktop does get synced to my Blackberry.
    I am on a network, and we use Windows 7, Microsoft Outlook for our calendar.  Any help would be greatly appreciated!

    I have version 6.0 on my desktop, and a Curve 8520 Blackberry.  Syncing was going fine until last week, when all of a sudden I noticed that after a sync my desktop calendar was almost empty!  Most events had been deleted from there, but thankfully they were all still on my Blackberry.  Since then any calendar event I enter on my Blackberry does not get synced to my desktop, but anything I enter on my desktop does get synced to my Blackberry.
    I am on a network, and we use Windows 7, Microsoft Outlook for our calendar.  Any help would be greatly appreciated!

Maybe you are looking for

  • BADI USER/EXIT for inserting cust. data after the Pruch. Requsitio is SAVED

    Hi all, Is there any  BADI or USER EXIT available for the transaction ME51N to save some customer data fields in a separta Z table , after the data is saved from the Purcahse requistion . I  have used the customer exit MEREQ001 for additing the custo

  • ResultSet wihtin ResultSet but cause cursor problem?

    I have a SQL error when running the code below: while(rs0.next()){                              ...                           String s= rs0.getString(1); ResultSet rs=null; rs=getResult1(aConnnection, s); /*statment is created in the function and Res

  • JSF 2.0: Composite Components and their ID

    I'm using Composite Components with JSF 2.0. Template: <composite:interface /> <composite:implementation>     <h:inputText id="text" /> </composite:implementation>Template Client: <h:form id="form">     <components:myComponent /> </h:form>In the rend

  • BBP_WFL_SECUR_BADI triggered twice

    Hi Gurus, I am using BADI BBP_WFL_SECUR_BADI to retrigger workflow when user make changes to certain fields in the shopping cart. First I check SCENARIO is initial, then I use function BBP_PD_SC_GETDETAIL to get screen values, then I called function

  • Hierarchy in BW using Flatfile

    Hi, Can you please update me on steps involved in Creating Hierarchy on a flatfile and procedure to load it to BW Any Help Doc will be helpful Thanks in advance