Calendar app does not have access to my calendars

I have two iPads on the same account, one of which is for my grandson. I'm trying to get it set up for him (He's 4). And I'm only doing it while he's asleep, because once he sees it, it's all over, lol. Idk what I did, but this morning there's no data in my calendar, and when I press CALENDARS, it says it doesn't have ACCESS to my calendar!?! & to go to privacy settings. So, I go to privacy, but there's no way I can see for ME to do anything here to fix this! Also, my email isn't gone, but it's not on the iPad, apparently, it just keeps downloading them all (I'm way behind), every time I open the app. Can anyone PLEASE!, tell me how to undo whatever I dd so it works again?
Thanx in advance

I have the same problem, I tried the solution of Dr Cox but that didn't work as he said go to system preference then mail, contacts etc. but I don't have that. Can someone help?
Elaine

Similar Messages

I tried to add my Planner Plus to my calendar and it gave me a message that says "This app does not have access to your calendars." You can enable access in Privacy Settings. But when I go to Privacy Seettings, there are no apps listed under Calendar.

I am trying to access my calender in the app Planner Plus and I get the message. "This app does not have access to your calendars." You can enable access in Privacy Settings. But when I go to Privacy Settings, there are no apps listed under Calendar. Anyone?

Oh my gosh. This worked perfectly!!!
After allowing the changes, I just had to open the apps again (such as Instagram), then the pop-up asking to allow access to Photos appeared!
And I thought I was going to get rid of my iPhone 4 already because of the issue.

TS1702 Telegraph app does not allow access to newspaper says have not paid subscription. Paid through iTunes and tel says it is iTunes prob. Can't talk to anybody at itunes

Telegraph app does not allow access to newspaper. Says. Have not paid sub but pay via iTunes Store. Telegraph says it is an iTunes prob but I can't get to talk to anyone there! Any suggestions please?

Just got this -
Dear iTunes Customer,
You recently received an email informing you that your iTunes Match Subscription could not be auto-renewed. We have resolved the problem and your iTunes Match Subscription has been renewed.
We apologize for the delay with your auto-renewal. If you have any questions, please contact AppleCare at http://www.apple.com/support/itunes/
I hope everyone else is all set too.

Your account does not have access to the forums system.

Greetings, My name is Jeff, I'm from Netwrix Corporation, which is a Microsoft partner. I have a problem with accessing Microsoft TechNet forum. After signing-in to my account: [email protected], I go to TechNet
forum, and get a message that: "Your account does not have access to the forums system." And also I've noticed that all my posts were deleted from TechNet forums. Can moderators tell me why did that happen? Why didn't I receive any warning
about my account suspension?
I've already submitted 2 tickets to MSDN Site Feedback Inquiry but didn't receive any answer.
I've called Microsoft TechNet at 800-344-2121 and Professional
Support team at 1-800-936-5800. But everybody send me to the MSDN Site Feedback Inquiry from which I didn't get any answer.
Anybody can help me with my problem?

Hi,
Is this the profile you're referencing?
http://social.technet.microsoft.com/Profile/netwrix
It doesn't appear to be banned, but you're definitely right about there being no activity listed.
I'd suggest contacting the forums team directly by sending an email to fissues (at) microsoft [dot] com. The admins do monitor this forum, so you'll probably get a response here as well.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

After upgrading to mountain lion, i find that my mail app does not have a "VIP" Tab. Was wondering if anyone else has this issue and what it is about?

after upgrading to mountain lion, i find that my mail app does not have a "VIP" Tab. Was wondering if anyone else has this issue and what it is about?

First, select sender(s) as VIPs. Then the VIP category will appear.
To select a sender as a VIP, open an email from that sender, then hover over their name and a star icon will appear to the left. Click the star, and that sender will be set as a VIP (and the category will appear in the pane on the left).

While deploying to another server from RM client using build definition i got below error "Package location does not exist or deployer user does not have access"

We have installed RM client in the POC server .
Installed Deployment Agent in Dev server .
We created Configuration stages for POC->Dev.
We created a template with x copy deployer and selected source as build definition.
While releasing we faced following issue ,
The release was success in POC (Where RM client is installed), but in DEV environment (Which is different server)it got rejected because of the error
"Package location(Path) does not exist or deployer user does not have access"

Hi Dhamayandhi
There is quite a bit to do to get RM working successfully. I have a soup-to-nuts guide on implementing continuous delivery with TFS and RM
here.
Cheers - Graham
Blog:
http://pleasereleaseme.net LinkedIn:

Device is connected to to a wifi network but does not have access to Blackberry services over wifi connection

please help me, my blackberry curve has been working perfectly fine (everything network and wifi connection are working great) since i got it but all of the sudden when i connect to our wifi at home i noticed that the wifi logo on the upper screen is grayed out. i checked the manual and it says: device is connected to to a wifi network but does not have access to Blackberry services over wifi connection. i dont know what to do, i tried the hard reset (removed batt for 1 min while phone is on and put it back in) i also tried to remove the wifi profile and added it back up but still nothing seems to work, my service provider has BB services available on my phone, i can received BBM, pushed email, use FB on my phone using my network but i cant use my wifi to browse.. what should i do? help me please!

With a PC, the Windows Firewall and/or the anti-virus software will sometimes block an attempted Internet connection.
Check both applications to see if you can find a "blocked" item and then take steps to "allow" the connection.
If still no luck, temporarily disable the wireless security for a short period to see if the PC can connect that way. If it can.....then you know it is security related issue.
See if the PC can connect using a setting like WPA-PSK-TKIP. The equivalent Apple setting would be WPA/WPA2 Personal.

Problem configuring Adobe Forms: ADSUSER does not have access to method...

I hope all of you are doing well...
So here is a rundown on what is happening.
Enviroment:
Netweaver 7.0
ECC 6.0
Abap and Java stacks are installed on the same system.
Problem:
I am trying to configure Adobe Print forms and not Interactive forms. When I run the test: FP_PDF_TEST_00
I get the following error:
Error Code: 100.102
SOAP Runtime Exception: CSoapExceptionFault : SOAP fault found in SOAP document /User ADSUSER does not have access to method rpData./<ns1:com.sap.engine.services.ejb.exceptions.
When I run the rpData test from the J2EE server I get the following response:
HTTP/1.1 500 Internal Server Error
Connection: close
Server: SAP J2EE Engine/7.00
Content-Type: text/xml; charset=UTF-8
Date: Fri, 03 Oct 2008 15:56:51 GMT
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" ><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode>SOAP-ENV:Client</faultcode><faultstring>User ADSUSER does not have access to method rpData.</faultstring><detail><ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException xmlns:ns1='http://sap-j2ee-engine/client-runtime-error'>User ADSUSER does not have access to method rpData.</ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException></detail></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
I would really appreciate all the help that I can get.
Thanks...

Thanks for the tip,
I had actually gone through the note before and tried out a couple of tips that were suggested in the note. I am still having the issue and believe that it might be due to the fact that I do not have a Credentials file installed.
I am applying for the credential and will see what happens.
thanks,
Saif

User J2EE_ADMIN does not have access to method rpData

Hello,
I'm using SAP ECC6 SR3 on windows x64 platform.
I try to launch report FP_PDF_TEST_00 in SE38 and I get following error message :
Test Program: Version Information (for Analysis Only) 1
*** SYSTEM ERROR
ERROR CODE : 100.102
ERROR MESSAGE :
SOAP Runtime Exception: CSoapExceptionFault : SOAP fault found in SOAP document /User J2EE_ADMIN does not have access to method rpData./<ns1:com.sap.engine.services.ejb.exceptio
SOAP Framework error: SOAP Runtime Exception: CSoapExceptionFault : SOAP fault found in SOAP document /User J2EE_ADMIN does not have access to method rpData./<ns1:com.sap.engine
I checked RFC ADS and it use J2EE_ADMIN to connect to /AdobeDocumentServices/Config?style=rpc.
Connection test returns no error.
Does anyone have an idea ?
Regards,

ADSUser could be locked as in this thread,
ADS Error: User does not have access to method rpdata.
Regards
Juan

ADS Error: User does not have access to method rpdata.

Hi All,
I have done the ADS configuration according to ADS guide. But when I check the ADS using FP_PDF_TEST_00 report. First of all it is not taking ADSUser or ADS_Agent id. If I give J2EE admin id and password then I get following error:
SOAP Runtime Exception: CSoapExceptionFault : SOAP fault found in SOAP document /User J2EE_ADMIN does not have access to method rpData./<ns1:
SOAP Framework error: SOAP Runtime Exception: CSoapExceptionFault : SOAP fault found in SOAP document /User J2EE_ADMIN does not have access t
Please help me on this.
TIA,
Amit

Amit,
Check this thread and see if it helps.
Adobe Document Services - test method rpData with user ADSUser and Notes 959462, 944221.
Chintan

How to listen for key press when air app does not have focus

Hi,
I am developing a application in air and part of the functionality I need is the ability for the app to listen for when a specific key is pressed, even when the air app does not have focus.
Is there support for this for windows or mac? If not, how might this be accomplished? ANE?

Ok Mr. Smartass...Ok
I'm building a browser that is always open, and when
a user presses Ctrl+F1 (notice, just those two keys,
I don't care what else they press...) the browser
will open up. That way, you don't have to wait for it
to load all the time.You have two ideas here. One is having a universal key map that always gets ctrl-f1 sent to your app. The other is a program that is constantly running so that you don't have to wait for it to open up. The former is not possible (and this is a good thing) As warneria and I have been saying, it is bad design for an app to try to force an OS to implement this kind of feature.
If you're not going to help please don't post at all;
it's a waste of time for both you, me, and anyone
else who may need help on the same subject. Why wouldBelieve it or not, I am helping you.
See
http://www.google.com/search?hl=en&lr=&q=programming+code+side+effects
and
http://www.faqs.org/docs/artu/ch04s02.html
"Doug McIlroy's advice to �Do one thing well� is usually interpreted as being about simplicity. But it's also, implicitly and at least as importantly, about orthogonality."
anyone in their right mind who's trying to steal
people's passwords come out and say, "I'm not trying
to steal people's passwords!"wait, your question is why would someone trying to steal passwords say I'm not trying to steal passwords? I think duplicitous people in their right minds might try to trick you that way.
Beyond that, even if you're not a malicious hacker - and I am sure you are not - if someone posts a solution to your problem, malicious coders then will have learned how to do it. If you think you're programming or using these forums in a bubble, you are not.

User does not have access to the Cloud Service Type

Where do it edit the access the the user? How do i fix this problem?
"messages" :
"hint" : "User 'DBAAS' does not have access to the Cloud Service Type 'dbaas' resource interaction with method 'POST' on accept type 'application/oracle.com.cloud.common.DbPlatformInstance' and content type 'text/plain'" ,
"stack_trace" : "oracle.sysman.emInternalSDK.ssa.cloudapi.CloudSecurityException: User 'DBAAS' does not have access to the Cloud Service Type 'dbaas' resource interaction with method 'POST' on accept type 'application/oracle.com.cloud.common.DbPlatformInstance' and content type 'text/plain'\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.EMCloudServlet.routeToServiceType(EMCloudServlet.java:180)\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.EMCloudServlet.perform(EMCloudServlet.java:235)\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.EMCloudServlet.performPost(EMCloudServlet.java:385)\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.rest.AbstractRestServlet.doPost(AbstractRestServlet.java:137)\n\tat javax.servlet.http.HttpServlet.service(HttpServlet.java:727)\n\tat javax.servlet.http.HttpServlet.service(HttpServlet.java:820)\n\tat weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)\n\tat weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)" ,
"text" : "Could not route to the Cloud Service Type 'dbaas'. The exception stack trace should provide some information about the reason of the failure" ,
"date" : "2012-12-04T12:27:11+0000"
}

I'm trying to create a new DbPlatformInstance using the EM12c Cloud API but i keep getting an error "User 'DBAAS' does not have access to the Cloud Service Type 'dbaas' resource interaction with method 'POST' on accept type 'application/oracle.com.cloud.common.DbPlatformInstance'
Below are the request and response.
REQUEST:
POST /em/cloud/dbzone/D7EEE339C1249F83FC4587C722EB20B5
Authorization: Basic xxxxxxxxxx
Content-Type: application/oracle.com.cloud.common.DbPlatformInstance+json
Accept: application/oracle.com.cloud.common.DbPlatformInstance +json
     "name" : "Database 11.2.0.3.0 Instance for SSA_USER_1",
     "description" : "Instance 2 of Oracle Database 11.2.0.1.0" ,
     "based_on" : "/em/cloud/dbplatformtemplate/B59EDC65951039E8E040E50A8F5B0435",
     "params" : { "username": "xxx", "password" : "yyy" }
RESPONSE:
Response Headers:
Status Code: 403 Forbidden
Connection: Keep-Alive
Content-Language: en,en-us
Content-Type: application/oracle.com.cloud.common.Messages+json; charset=ISO-8859-1
Date: Tue, 04 Dec 2012 14:38:08 GMT
Keep-Alive: timeout=5, max=100
Server: Oracle-Application-Server-11g
Set-Cookie: ORA_SMP_EM_AUTH_-4568676491231894381=52W7Q2KQ5w5FTn8MQYrZ3Hqp5QnqBLkNwVKvHSS728pMzyQpxJpd!352643837; path=/em; secure; H ttpOnly
Transfer-Encoding: chunked
X-ORCL-EMOA: true
X-Oracle-DMS-ECID: 004o0VGXIE08XrqpKK4Eye0001P_00009q
X-Powered-By: Servlet/2.5 JSP/2.1
x-specification-version
Response Body:
"messages" :
"hint" : "User 'DBAAS' does not have access to the Cloud Service Type 'dbaas' resource interaction with method 'POST' on accept type 'application/oracle.com.cloud.common.DbPlatformInstance' and content type 'text/plain'" ,
"stack_trace" : "oracle.sysman.emInternalSDK.ssa.cloudapi.CloudSecurityException: User 'DBAAS' does not have access to the Cloud Service Type 'dbaas' resource interaction with method 'POST' on accept type 'application/oracle.com.cloud.common.DbPlatformInstance' and content type 'text/plain'\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.EMCloudServlet.routeToServiceType(EMCloudServlet.java:180)\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.EMCloudServlet.perform(EMCloudServlet.java:235)\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.EMCloudServlet.performPost(EMCloudServlet.java:385)\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.rest.AbstractRestServlet.doPost(AbstractRestServlet.java:137)\n\tat javax.servlet.http.HttpServlet.service(HttpServlet.java:727)\n\tat javax.servlet.http.HttpServlet.service(HttpServlet.java:820)\n\tat weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)\n\tat weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)" ,
"text" : "Could not route to the Cloud Service Type 'dbaas'. The exception stack trace should provide some information about the reason of the failure" ,
"date" : "2012-12-04T14:38:09+0000"
}

Apps do not have access to camera,microphone, anything. Went to settings and selected the app but the option to allow access to these things aren't there.

Apps do not have access to camera,microphone, anything. Went to settings and selected the app but the option to allow access to these things aren't there.

Did you go to Settings/Privacy and check the apps listed?

I have an ipad 2 that is mounted horizontal in the wall. added the iaqualink pool control app. but the app does not have the ability to turn horizontal. is there anyway to manually turn and lock the app.??

i have an ipad 2 that is mounted horizontal in the wall. added the iaqualink pool control app. but the app does not have the ability to turn horizontal. is there anyway to manually turn and lock the app.??

Yes.
http://ipadinsight.com/ipad-basics/how-to-add-a-website-to-your-ipad-home-screen /

List the items the user does not have access to.

I have a requirement to show the user a list of all the libraries of a site with the number of items in each even if the user does not have rights to the library. (the link or button will be grayed out if the user has no access)
I am looking for opinions on how to do it with the best performance possible.
The first candidate is to first enumerate all the items in all the libraries with elevated then do the same as the logon user and compare the collections.
The drawback is performance so maybe rely on the assumption that the overall content of the site does not change often so keep the collection from the elevated run in cache (with configurable lifetime) and only run as user on page load and compare with the
cache.
I am sure there is probably a better way so let's here it. can we take advantage of search?
This is on SP2013 but we are not using apps for unrelated reasons. We can use server object model.
Thank you all.
Ofer Gal

Hi,
I believe Search cant be used since Search is Security Trimmed. Search will not return the result if user dosent have the permission.
Thanks! Best Regards, Prasham Sabadra http://prashamsabadra.blogspot.in

Calendar app does not have access to my calendars

Similar Messages

Maybe you are looking for