Calendar app - shared calendar issues

Hi there, I'm new to the mac platform...
I was wondering if anyone can help with my set up of the calendar app with a shared google calendar.
what we have is an office calendar on google with each person having a calendar (within the same id) - it means that we can check where everyone is/what meetings are happening etc...
however, the problem is that the notifications appear on everyones machines for every calendar, even if they are not ticked in the list in the app.
Is there a way to only allow notifications from one of the calendars or will we just have to switch off the notifications/reminders
thanks

Hi and Welcome to the Community!
Anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. If this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Calendar issues - bugs or do I misunderstand how it should work?

    I'm having a few calendar issues that seem like bugs. I have the latest release installed but I don't remember seeing these problems before updating. I could be wrong though - my memory ain't what it used to be.
    On the calendar week view, if I swipe to scroll down to see the afternoon, I can't swipe back up again. I have to swipe left or right to view a different week before it'll let me view the morning.
    Also, if I go to the month view and open a particular day with an event. If I then swipe on the bottom to go backwards, it shrinks the card and lets me choose another open app (home view?). Instead I would have expected it to return to the previous screen?
    Another problem; I had to tap an event in the week view about five times before it opened the day view. Poor detection?
    Do these sound like bugs? I've only had my Pre for a few days so I'm still learning. Thanks

    Hello and welcome to the forums;
    Going back and forth between morning and afternoon is working fine for me, how many calendars do you have and what kind are they (yahoo, gmail, etc)?
    Going to month view, then tapping on a day and using the back gesture does put you into card mode, because you have not entered a new level of menu, just a different view. If you were to go into a specific event, then you could back gesture to the previous view, but going between day/week/month is accomplished only with the selection buttons at the bottom of the screen.
    Instead of trying to tap a particular event from week view, have you tried just tapping on the date at the top? or somewhere else on the column for that particular day? Do you see the "ripple" on the screen showing that it recognized a screen tap?
    Hope this helps,
    TreoAide

  • "Fake event to work around calendar issue"

    I've got a Samsung Stratosphere running Android 2.3. When I search in the Calendar app for an event, it always first briefly shows a list of all events, then shows the search results. Inevitably, at the top of the list of all events is one that says, "Fake event to work around calendar issue." It is set on 01/01/1975 from 10:00 AM - 11:00 AM, with no repeats and no alarm. When I go to that date on the calendar on the phone, there it is, listed on the calendar linked to my e-mail account; but when I check my online Google Calendar, there is no such event on that or any other date on any calendar.
    There seems to be no harm in leaving it there, and I wonder if there'd be any harm in deleting it. A quick Google search showed that this is an event that shows up on many Android phones synced to Google Calendar, sometimes with repeats or alarms. (For example: https://community.verizonwireless.com/message/607134#607134; http://forums.androidcentral.com/motorola-droid-x/45510-problems-google-calendar-fake-event-work-around-calendar-issue.html.)
    Has anyone else here experienced this? Has anyone successfully deleted it?

    My little Google search showed it occurring for at least a couple of years now across a spectrum of Android devices from various manufacturers. Which suggests that somehow the big G is responsible for whatever it is. The version history for a 3rd-party calendar app maker suggests that this "bizarre event ... that Google Calendar puts in at times" might be "Bug? Google programmer forgot to remove debug code? Weird kludge by Google Programmers?": http://www.pimlicosoftware.com/PimlicalAndroidVersionAndSlipstreamHistory.htm (scroll down to the bottom). Frankly, striding forward to conquer the world while never getting around to fixing rubbish from years ago seems like Google's M.O. these days.

  • RIM Facebook 1.7 Calendar Issues (with Google sync)

    I know that the Facebook app calendar issues have been documented all over the web and in other posts on this forum; but I still have been unable to figure out the best solution to this problem. 
    I am using the latest version (1.7) of the Facebook app and the latest version of google sync.
    Despite unchecking the calendar sync option for the Facebook app, it ALWAYS eventually hijacks the "device default" calendar for my BB (curve 8330) and adds all my friend's birthdays.  It sometimes happens after a battery pull, other times it seems random.  Despite deleting the facebook cical entry, it will always come back eventually. 
    I am unable to set anything other than facebook in my default calendar option under options>advanced>device default. When I delete the facebook cical, the default calendar selection (options>advanced>default services) disappears entirely I assume that this is because there is no option other than the device default. 
    I have NEVER had a cical entry for my google calendar.  I'm assuming the google sync app does not need a cical entry.  I'm also assuming that the lack of a cical entry is what is preventing me from selecting my google calendar as my default, which is what many suggest to solve this problem.  I cannot select my google calendar as a default, which isn't a problem until facebook hijacks my calendar.
    Previous to FB app 1.7, everytime my calendar was hijacked, google sync would become a one way street (events would sync from the web to my phone, but not vice versa).  To remedy this, I would delete the facebook cical, RSET the calendar manually, and re-sync my google calendar.  This would work fine until the next time FB hijacked the calendar.
    Now (in FB 1.7), despite hijacking my calendar, it does not appear to interrupt google sync in either direction.  My google calendar is now named "facebook," but birthdays do not sync to my google calendar.  It is very odd indeed and worries me that this convoluted setup is going to mess up my online google calendar at some point.
    Unchecking the calendar option in the facebook app should prevent it from creating a cical entry. Period.  This is very frustrating and discouraging to see RIM update this app from 1.5 to 1.6 to 1.7 without fixing this obnoxious issue.
    Has anyone else been able to find a solution to this problem?

    Had the same problem here plus the same event kept getting duplicated 20 to 30 times per day.
    I tried all of the solutions that people suggested:
    removed facebook cical
    set default email to another email address
    battery pull
    none of that worked; there was still a "default" email with all of the replicated events.
    Then I stumbled upon a Blackberry tip to move all events into one email account.  So, I moved everything into my GMAIL account, and the "default" email disappeared.  Apparently, if a calendar account is deleted without deleting the events (as was the case with Facebook) the rogue events stay in a "default" calendar.
    I then used Blackberry desktop manager to create a sync to MS Outlook.  I opened Outlook and did a search for the replicated events (by name).  494 replicated events were found, so I selected all of them and deleted them.  I then went back to Blackberry Desktop Manager, re-synced, was prompted to remove the events and WHAM, problem solved.
    Make sure that you uncheck he calendar feature in the Facebook for Blackberry App options.
    I hope that this helps others!

  • "Fake Event to Work Around Calendar Issue" on Google Calendar

    My husband noticed the following message on two days of his Google Calendar on his phone "Fake Event to Work Around Calendar Issue".  Has anyone else had this experience and if so, why did it happen? How do we avoid in the future"?
    I logged onto the calendar online and it doesn't appear there, just on his phone.
    Thanks

    What Calendar APP are you using? Sounds like an APP issue to me, since you're not seeing it on GOOGLE Calendar online. I am not seeing your error on mine ... 

  • Outlook Sync (Contacts/Calendar) Issues - Progress today........

    Folks,
    I posted another earlier discussion on this topic over the weekend, but since I got my iPhone on Friday, I have probably burned about 20 hours working trying to figure out why I cannot sync my calendar and contacts from Office 2003 "OR" 2007 into my iPhone. When I started this process, 584 of my 1310 contacts did sync, I had NO luck on getting any of calendar items to sync.
    Today we resolved the Contact issue!!! Still working on the calendar issues and if anyone has any further ideas, I am open to it, but it appears for both the contacts and calendar issues, I had corrupt data. You dont know it until encounter it this way.
    Here is what you need to do in order to get the contacts to sync, it worked for me, hopefully it will work for many after me:
    1. Export "ALL" of your contacts to a .CSV (Comma Separated Value for Windows) file. Just export them to your desktop or somewhere easy to find them. As an extra safety net to ensure you dont lose your contacts, back them up also to a .XLS file as well as a .PST file.
    2. Delete "ALL" your contacts out of Outlook. Sync Outlook, especially if your like me and have your contacts and calendar on a corporate exchange server. Be sure you clear your iPhone so there is no contacts on it.
    3. Import the .CSV file to a VCARD file, sync to your coporate server, sync your iTunes and you should now see all your contacts.
    Again, it worked for me and hopefully it works for you.
    Good Luck!!
    Alan
    Dell D420 running Win XP   Windows XP Pro  

    Everyone is waiting for this.
    Right now you cannot sync locally between your phone and your desktop. You are forced to upload your contacts to another company's server (read "the cloud") and then download them from whatever device you didn't upload them from.
    Still waiting for this fix please.

  • Any way start over from scratch to fix iCloud calendar issues in Outlook 2010?

    I'm suddenly having perplexing iCloud calendar issues in Outlook.  Forget the hundreds and hundreds of duplicate entries for birthdays and holidays, and the thousands of duplicate contacts - I've just been manually deleting them from Outlook.  I also tried manually deleted iCloud files from iCloud on outlook, but this does not seem to affect what is on iCloud itself.  I've now got an issue where if I add an appointment on my iPhone, it appears on Icloud but not in Outlook 2010 even though the iPhone calendar is displayed in Outlook. iPad appointments show up on iPhone, iCloud and Outlook.  iCloud entered appointments show up on iPhone, and iPad and Outlook.  Of course it is maddening that there is a separate calendar for each (there is only one of me, so why a separate calendar in Outlook  for every source is beyond me).  How can I get my iPhone to start showing up again in Outlook?  Another issue is that now every time I click on calendar in Outlook, it takes 2-3 minutes to display the calendar because iCloud seems to be syncing. I'm assuming this is because there a so many duplicates.  I've removed Icloud from Outlook. Ran a repair on Outlook.  Uninstalled iCloud. Reinstalled.  Re-added to outlook., but the issue is never fixed.  I'm considering make a brand new Apple ID and abandoning my current one, but that means I have to change my iPad, iCloud, iPhone, family iPhones, Outlook, readd credit card, reload all of the data.  That's a pain.  I sure would be nice to have a simple way of editing the iCloud data and adding devices (and having a more descriptive source name would be even better).

    I found sync options under "info"
    I was looking to sync the information from the phone back into outlook, It looks like these options will sync what is on outlook into the phone.. 
    I wanted to export from the phone (which has all of the old appointments and updated contacts) , back into outlook
    Any other thoughts?
    Thanks

  • Ical sync to gmail calendar issues with snow leopard

    I had sync before w/ iCal 3 then it stopped last June.  I'm now running 10.6.8 with the hope that the Sync would be good. Still no luck.  My Gmail account is working find with connection to my Droid just not syncing w/ iCal.  Note I've tried to re-enter the Gmail account with out luck.
    I appreciate the help !
    Thanks

    Harvey,
    The "On My Mac" calendars will not sync, and in my experience are no longer required. They can be safely deleted after making backup copies.
    MobileMe: Troubleshooting MobileMe Calendar issues should help you sort out your syncing problems.

  • Calendar Issues - "Repitition is not working for the item you tried to access"

    I ran into an interesting error when troubleshooting a calendar issue today, wondering if anyone has seen it.
    Exchange 2010 SP2 latest RU, Outlook 2010
    User changes then start time for a recurring meeting, changes in everybody's calendar but hers 9still shows in her calednar as the original start time)
    Logged into OWA to see if her claendar reflected the correct start time there - no, still  shows the old start time.  So I open the meeting, have a quick look, and the following error pops up:
    "Repitition is not working for the item you tried to access.  It's possible either the start or end date are not correct"
    Has anyone seen this error in OWA before?
    TAG

    Hi,
    Please double check whether the updated start time and end time are changed properly in attendees’ calendar. Also confirm whether the updating message is in the organizer’s sent items both in OWA and Outlook.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Exchange 2007 Room Calendar Issues

    Hello, on our Exchange 2007 server, we have 6 room mailboxes, all setup exactly alike. One of the mailboxes started not responding to calendar requests. If I schedule a meeting, exchange does it's part, and sends out the invitation, but nothing shows in
    the room calendar itself. Besides exporting the existing calendar entries and creating a new mailbox, is there anything I can try?
    [PS] C:\Windows\System32>Get-MailboxCalendarSettings RadcliffeConf.Room | fl
    AutomateProcessing                  : AutoAccept
    AllowConflicts                      : False
    BookingWindowInDays                 : 180
    MaximumDurationInMinutes            : 1440
    AllowRecurringMeetings              : True
    EnforceSchedulingHorizon            : True
    ScheduleOnlyDuringWorkHours         : False
    ConflictPercentageAllowed           : 0
    MaximumConflictInstances            : 0
    ForwardRequestsToDelegates          : True
    DeleteAttachments                   : True
    DeleteComments                      : True
    RemovePrivateProperty               : True
    DeleteSubject                       : True
    DisableReminders                    : True
    AddOrganizerToSubject               : True
    DeleteNonCalendarItems              : True
    TentativePendingApproval            : True
    EnableResponseDetails               : True
    OrganizerInfo                       : True
    ResourceDelegates                   : {}
    RequestOutOfPolicy                  :
    AllRequestOutOfPolicy               : False
    BookInPolicy                        :
    AllBookInPolicy                     : True
    RequestInPolicy                     :
    AllRequestInPolicy                  : False
    AddAdditionalResponse               : False
    AdditionalResponse                  :
    RemoveOldMeetingMessages            : True
    AddNewRequestsTentatively           : True
    ProcessExternalMeetingMessages      : False
    DefaultReminderTime                 : 15
    RemoveForwardedMeetingNotifications : False
    Identity                            : xxxx.com/SDI Users Groups and Computers/
                                          Room Mailboxes/Radcliffe Conf. Room

    Hi   n3lka
    Thank you for your question.
    Owing to not respond, you can try to check the mailbox permission.
    “nothing show in the room calendar itself”, you can make outlook in cache mode, then, you can try to uncheck option “Download share folders”.
    There is a similar thread you can refer to by the following link:
    https://social.technet.microsoft.com/Forums/en-US/cb057c90-9eaa-4ead-8b1d-68e8ae87c0b0/exchange-2007-room-calendar-issues?forum=exchangesvrclientslega
    when nothing shows in the room calendar itself, you can try to make another user schedule a meeting, if another user schedule a meeting successful, you can refer to the following link to solve it:
    https://social.technet.microsoft.com/Forums/en-US/a31af989-aee1-42f0-88bd-c178c6199379/exchange-2007-room-mailbox-and-calendar-issue?forum=exchangesvradminlegacy
    If there are any questions, please let me know.
    Best Regard,
    Jim

  • Installing PSE10 Shared technology issue on windows 8.1

    This is about the millionth time I have typed this due to the rubbish nature of this forum...ie when you type ask a question in the box it then directs you to this page so you have to type all over again!
    I am currently mega frustrated
    I have PSE 10 and put it on my new pc running windows 8.1. It all seemed to be working but today when i tried to open the photo editor it would not open. So I did as requested and uninstalled then tried to reinstall but now I have the shared technology issue mentioned in many places on the forum.
    I have tried all the fixes mentioned. i have even tried restoring the computer to a previous version but all to no avail. I am wasting my few precious editing hours trying to get the app working and I am really fed up. Can anyone please tell me whether PSE 10 works properly on window 8.1. If not I will be buying a different package

    Open Regedit and go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
    Delete this key under Session Manager "PendingFileRenameOperations". Restart the installation and it will work fine.
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • I want to create an iPad app with multiple issues of the same magazine inside it

    I want to create a digital magazine for iPad. I know with Digital Publishing Suite I can create apps for iPad.
    But there is a problem. Is not clear in the website if with the Single Edition I can create an app that contains all issues of the magazine, or if I have to create a new app for each issue of the magazine that I want to publish.
    Could you please get me out of doubt?
    Please, I need a quick answer. Thanks in advance!

    This should help:
    http://boblevine.us/digital-publishing-suite-101-single-edition-vs-multi-folio-apps/

  • HTML emails render as plain text.  Restarting Mail.app resolves the issue

    I keep seeing this problem every day. Occasionally when I receive an HTML email (e.g. a newsletter), the HTML isn't rendered -- instead some sort of plain text equivalent is displayed, which is full of entity codes and URLs to all the images in the HTML. Clearly not right.
    If I restart Mail.app when this occurs, the HTML email is ALWAYS rendered correctly. It's really annoying having to do this every day!
    It seems like it could be to do with leaving Mail.app running when my Mac is in Sleep mode -- the issue always seems to occur when I wake the Mac. When I have restarted Mail.app after the issue occurs, all incoming HTML emails are rendered correctly.
    Has anyone else seen this issue and do you know of a workaround? How do I submit a bug to Apple?
    Cheers,
    Olly

    Hi again:
    The preference file is located in the home folder (~library>preferences). Occasionally (rare, but it happens) preference files become corrupted and then cause all sorts of odd behavior.
    Barry

  • TS1702 Who do I speak to regarding an App Store purchase issue ?

    Who do I speak to regarding an App Store purchase issue ?

    Contact Support
    http://www.apple.com/support/itunes/contact/

  • Cant install PSE 11 shared files issue?

    Hi - I cant seem to install PSE 11 as I keep getting shared file issues. Ive managed to work my way into the manual error log and its saying this - Any ideas please? Please go slow I am so not technical at all!
    Thanks
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    Visit http://www.adobe.com/go/loganalyzer/ for more information
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    START - Installer Session
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    RIBS version: 3.5.8.0
    Win OS version: 6.1.1.0 64 bit Type: 1
    ::START TIMER:: [Total Timer]
    CHECK: Single instance running
    CHECK : Credentials
    Load Deployment File
    Create Required Folders
    Assuming install mode
    Looking up install source path
    Sync Media DB ...
    ::START TIMER:: [Sync Media DB]
    Pre check media db sync
    End of Pre check media db sync. Exit code: 0
    :: END TIMER :: [Sync Media DB] took 247.39 miliseconds (0.24739 seconds) DTR = 371.882 KBPS (0.363166 MBPS)
    Ready to initialize session to start with ...
    ::START TIMER:: [CreatePayloadSession]
    -------------------- BEGIN - Updating Media Sources - BEGIN --------------------
    Updated source path: C:\Users\Nina\Adobe Photoshop Elements 11\PSE 11\ElementsSTIInstaller
    Updating media info for: {0449467E-102A-4514-9F4D-91BCEE129390}
    Ignoring original data since install source is local
      Type: 0, Volume Order: 1, Media Name: Adobe Photoshop Elements 11
      Path: C:\Users\Nina\Adobe Photoshop Elements 11\PSE 11\ElementsSTIInstaller\payloads\ElementsCameraRawProfile7.0All-160512123011\Install.db
    Updating media info for: {2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA}
    Ignoring original data since install source is local
      Type: 0, Volume Order: 1, Media Name: Adobe Photoshop Elements 11
      Path: C:\Users\Nina\Adobe Photoshop Elements 11\PSE 11\ElementsSTIInstaller\payloads\AdobeXMPPanelsAll\Install.db
    Updating media info for: {3A8D4A3A-5E08-4E33-8831-50CB4DC101E6}
    Ignoring original data since install source is local
      Type: 0, Volume Order: 1, Media Name: Adobe Photoshop Elements 11
      Path: C:\Users\Nina\Adobe Photoshop Elements 11\PSE 11\ElementsSTIInstaller\payloads\ElementsCameraRaw7.1All-x64\Install.db
    Updating media info for: {5A73BC84-244A-48B4-ADDB-99CE9E2DBBE7}
    Ignoring original data since install source is local
      Type: 0, Volume Order: 1, Media Name: Adobe Photoshop Elements 11
      Path: C:\Users\Nina\Adobe Photoshop Elements 11\PSE 11\ElementsSTIInstaller\payloads\ElementsCameraRaw7.1All\Install.db
    Updating media info for: {98CE8819-87AA-4814-8167-ADDDD513485F}
    Ignoring original data since install source is local
      Type: 0, Volume Order: 1, Media Name: Adobe Photoshop Elements 11
      Path: C:\Users\Nina\Adobe Photoshop Elements 11\PSE 11\ElementsSTIInstaller\payloads\PSE11STIInstaller\Install.db
    Updating media info for: {D1B83970-7269-48BE-8B0E-5120D9327E52}
    Ignoring original data since install source is local
      Type: 0, Volume Order: 1, Media Name: Adobe Photoshop Elements 11
      Path: C:\Users\Nina\Adobe Photoshop Elements 11\PSE 11\ElementsSTIInstaller\payloads\AdobeAPE3.101-mul\Install.db
    Updating media info for: {F6F5021E-0548-43C1-82CC-C5C7A6906585}
    Ignoring original data since install source is local
      Type: 0, Volume Order: 1, Media Name: Adobe Photoshop Elements 11
      Path: C:\Users\Nina\Adobe Photoshop Elements 11\PSE 11\ElementsSTIInstaller\payloads\ElementsCameraRawProfile7.0All\Install.db
    --------------------  END  - Updating Media Sources -  END  --------------------
    Supported RIBS version range: [0.0.66.0,3.5.8.0]
    [    3392] Tue Jul 02 20:12:47 2013 ERROR
    Payload {98CE8819-87AA-4814-8167-ADDDD513485F} of version: 4.0.19.0 is not supported by this version: 3.5.8.0 of RIBS
    Payload {D1B83970-7269-48BE-8B0E-5120D9327E52} of version: 4.0.19.0 is not supported by this version: 3.5.8.0 of RIBS
    Unsupported payload versions included
    [    3392] Tue Jul 02 20:12:47 2013  INFO
    :: END TIMER :: [Total Timer] took 326.856 miliseconds (0.326856 seconds) DTR = 293.707 KBPS (0.286824 MBPS)
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 3 error(s), 0 warning(s)
    ERROR: Payload {98CE8819-87AA-4814-8167-ADDDD513485F} of version: 4.0.19.0 is not supported by this version: 3.5.8.0 of RIBS
    ERROR: Payload {D1B83970-7269-48BE-8B0E-5120D9327E52} of version: 4.0.19.0 is not supported by this version: 3.5.8.0 of RIBS
    ERROR: Unsupported payload versions included
    Search the same string above to find when the error occured.
    Exit Code: 21 - payloads version is not supported by installed version of RIBS
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    END - Installer Session
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

    I have come across this on another forum but I dont have any idea how to do this? Can someone help please?
    So resolve this TIME consuming problem, i had another look at that support page and this is what i did to fix it Thank you for your help 99jon for the link.
    Copied the elements folder to the root of the HD, then renamed the folder with the installer files contained within to c:\PSElements9Installer then ran the setup.exe as administrator and hey presto, it worked and fully completed the install grrrrr.
    Cheers people of the Digital World, ive now relieved my stress
    Was this helpful?Yes  NoSubmit
    Reply

    Mark as:
        1 posts
    11-Apr-2013
    Currently Being Moderated
    3. TangAdmin,
    11-Apr-2013 17:04   in reply to Digital Controller
    Report
        Had the same problem with PSE10 Copying it to kthe root of c and renaming it to PSElements10Installer Worked perfectly.  
    thanks to all involved
    Was this helpful?Yes  No

  • Elements 11, will not reinstall, shared technology issue.

    Elevents 11, will not reinstall, shared technology issue.

    Hi oktc1633,
    Also, try steps mentioned in given link:- Install rollback and Shared Technologies | Windows
    Looking forward for your support.
    Regards,
    Sarika

Maybe you are looking for

  • HP LaserJet 4 plus driver

    The driver I have will not install, setup, or execute. So how do you get the driver into windows XP. This is the first time in 18 years I have seen this. It appears the driver is in DOS format. Hopefully I will get an answer before the weekends out.

  • Best practice when using auto complete in view layer

    Hello I have a question regarding best way to store/cash data when using auto complete function in view layer. I know that there will be a lot of visitors that will use this function and I dont want to kill the application server so I need some advic

  • Print Report of cash Memo OR Page settings for cutsheet papers

    hello and hi me have a report of cash memo page size 12 by 13.8 cm (5 by 4.8 inch) ,using printer dot matrix problem is that when me print a single page , printer not stop , its go to end of next page its mean printer print at portarit size page , an

  • Detailed Discount Report needed.

    Dear all, How can we identify from where the discount % value is being picked up in the Sales Order or any other marketing documents? Is there a report that points out in Sales Order, this particular line item's discount is 10% and it is being extrac

  • Create a data source and database tables using WSAD

    Hi, guys: the following is from a tutorial: http://www-106.ibm.com/developerworks/websphere/techjournal/0306_wosnick/wosnick.html "To create the data source and Cloudscape database tables automatically, right click on the HelloWorldServer in the Serv