Calendar for 5 years

Dear all,
My client has 10 public holidays. When I created the holiday calendar, I marked it for 5 years (2011-2016). But now I'm having a small doubt,
Sunday is weekly off for my client.
Think on 2012 year two out-of the above 10 public holidays falls on Sundays. So effectively, the employees get only 8 holidays.
1. So what is the use of creating calendar 2 years, 3 years or five years?
2. Do we need to create the calendar every year or need to collect all the changes in the 5 years and create a different calendar.
3. Even then what will happen after 5 years? Who will create the calendar for client?
4. I know the option floating holidays and some other option is available. But up to what extent it helps?
Regards
ET

Hello ET,
I general, we will create Holiday calendar yearly and will generate workschedules every year as part of the yearend activity from HR side.
Every company will have different set of holidays, in that floating hlidays like festivals will change every year so its good to generate holiday calendar every year.
Edited by: Piscian . on Jul 5, 2011 6:59 AM

Similar Messages

In looking at my calendar for January, I found all the entries from last year. I thought I would delete the while month and start over, but it deleted all calendars from icloud. Can I get them restored and how. Stoormy

In looking at my calendar for next year I found all the entries from last year were there as well as a few more I intended to delete January and just start over but everything was deleted including from icloud, Any way I can get those restored.
Thanks Glenn

Maybe here:
iCloud: Troubleshooting creating backups

How do I create a new calendar for the current year, using last years calendar's birthday's/photos and comments from the lower pages?

Each year for the past 5 years I make a family calendar and send copies to all he family members around the globe. I hate that I have to recreate all the birthdays and special occasions from scratch, and re-drag all the photos onto these dates, in the lower half of the page of each month on the new calendar. How can I create a new calendar for the current year and port all of these photos/comments into the new calendar from last years calendar, to save having to redo all this work!! I am not talking about the upper half page of the photos only...I am referring to the calendar page of each month.
Thanks in advance.
Colin

Welcome to the Apple Discussions. Open iWeb so you see your original site in the left hand pane. Use the File->New Site menu option to create a new site. Give it the name you want.
Now select a page in your original site and type Command+D. That will duplicate the page. Drag the duplicate page down to the new site and rename it as needed. Do that for the other pages you need in the original site.
OT

View the calendar for a year

How can i view the calendar for a year, not just a month

This feature is not available with the default Apple Calendar application. There may be an App in the iTunes App Store that does this for you.

FM to get previous fiscal month/year and calendar month/year for a date.

Hi All,
I am having a requirement to extract some data based on either the previous fiscal month/year or the previous calendar month/year. There is no company code input to find the fiscal/calendar month/year.
At selection screen, user can select either fiscal or calendar selection.
Based on the selection, the data will be extracted.
For the system date, we need to calculate previous fiscal month/year or previous calendar month/year and populate the calculated data back to the selection-screen.
Can you one of you please suggest an FM to find previous fiscal month/year and previous calendar month/year.
Thanks in Advance,
Regards
Gowthami

Hi Gowthami,
You can use following function module to calculate previous / next day or month or year.
   call function '/SAPHT/DRM_CALC_DATE'
      exporting
        date      = sy-datum
        days      =
        months    =
        sign      = '-'
        years     =
      importing
        calc_date = .
Here, you can give '-' to sign, if you want previous day / month / year.
Here, you can give '+' to sign, if you want next day / month / year.
And depending upon your requirement, you can pass suitable value to days / month / year.
e.g. To calcualte last month,
   call function '/SAPHT/DRM_CALC_DATE'
      exporting
        date      = sy-datum
        days      =
        months    = 1
        sign      = '-'
        years     =
      importing
        calc_date = wv_prev_month.
so it will give '23-01-2008' . Then convert it in the required format as per your requirement using string function concatenate.
Hope this help you.
Regards,
Anil

Help me to search on calendar for more than one year

I desparately need to be able to search on calendar for more than one year., which was taken away on the new operating system. I have kept personal memories of my husband on there in the notes sections on days when we did things. ( I have also kept all kinds of personal notes, like doctor records or conversations, in the notes of events/dates.) it is a huge loss for me not to be able to search my calendar for more than one year. Is there any way I can do this?

Jens,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

How to create a calendar for two years in GL

how to create a calendar for two years in GL

Hi,
- Login into Oracle EBS and select a responsiblity with GL Superuser drants (e.g. General Ledger Super User)
- Navigate to Setup + Financials + Calendars and open the GUI Accounting (Navigation for R12)
- Query the used calendard (used from jour Set of Books/ Ledger via the GUI
- Enter for each Period (= Period Type 13, 16, 18,...) one Record, have a look to the existing data, used the same logic.
In the GUI, defined the calendar for 2 Years
Dirk

4-4-5 Calendar Configuration For Year 2012

Hi
Please tell me how to config 4-4-5 calendar for the year 2012.
Thanks & Regards
Jose

Hi Guido,
I want to set up 4-4-5 calendar for 2012 in following way.
January:     02/1    to 01/29
Febuary:     01/30 to 02/26
March:        02/27 to 04/01
April:           04/02 to 04/29
May :           04/30 to 05/27
June :        05/28 to 07/01
July:           07/02 to 07/29
August:       07/30 to 08/26
Sept:           08/27 to 09/30
October:     10/01 to 10/28
November: 10/29 to 11/25
December 11/26 to 12/30
Please help me to set up this calendar into the SAP system.
Regards
Jose

When I click on calendars for hotels or airline sites, the calendar is set to future years: 2054, 2038, etc

Travelocity entering dates, when I click on the calendar, the year is 2056. Many other sites do the same.

That confirms that the date and time setting is correct.
Do you have that problem on all websites that use such a calendar?
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

HT204053 The entire family has used one itunes account for years. How do we all set up separate iCloud accounts now?

The entire family has used one itunes account for years. How do we all set up separate iCloud accounts now? Or should we? 5 macbooks, 2 ipads, 4 iphones, 2 itouch, 2 imacs. How does one decide what to sync, share and what not to? Green Jeans.

You need to start by understanding the distinction between iTunes and iCloud - Apple confuse the issue by referring to 'iTunes Match' as part of iCloud. It isn't.
You don't have to have the same login (Apple ID) for iTunes and iCloud; many people don't and there's no problem about it.
Your iCloud ID gets you email, calendars, contacts, iWork documents and PhotoStream syncing between devices.
Your iTunes ID gets you the iTunes Store, the App Store for iOS, the Mac App Store for OSX,, 'iTunes in the Cloud' (downloading of purchased items to any logged-in device) and 'iTunes Match' (uploading of songs not purchased in the iTunes Store).
Your family members can easily each get their own iCloud account to keep email etc. separate - in each case they will need a different non-Apple email address (a free one from Yahoo etc. would do) to set up the ID. If they are sharing a Mac they need to be using a separate user account.
They can have their own iCloud accounts and still all sign into the same iTunes account: or they can open their own iTunes accounts using their new iCloud Apple IDs.
BUT they cannot transfer items purchased under the present iTunes ID to different iTunes IDs.

Mid Month Calculation for Year dependent fiscal year

Hi All,
We are in middle of AA implementation .How can we configure mid month in year dependent fiscal year .System doesn't allow to put mid month date for year dependent fiscal year.
If we copy co.code from best practice co.code BP01 system updates date this table in back round.
But we are not copying from BP01.
Any one has configure this for year dependent please input.
Thanks,

Hi,
this function is not possible, you have to use a fiscal year variant with 24 real periods instead.
Check the IMG documentation concerning "Use of Half Months in the Company Code":
- When you specify the use of half periods in the definition of an asset company code, half periods are automatically specified in all other company codes that use this fiscal year version.
- You cannot use half periods with non-calendar fiscal months.
- You cannot take back the use of half periods once the specification has been made. It is noted internally by the system in the asset master records.
Regards,
Markus

Issue in assigning new Planning Calendar for MRP.

Hello Experts
I have trouble in setting up new Planning calendar for S&OP and MRP process. Let me explain in details
Requirement is, currently I am using standard country specific Factory calendar format (monthly period) per plant. But new requirement has came up and Company wants to change beginning and end of period (monthly) -- as shown below
Current Calendar
1 July to 31 July = period 1 - 2014
1 Aug to 31 Aug = Period 2 - 2014
and so on..
New requirement is ( Last week of Friday is end of Period)
Sat 28 June to Fri 25 July = Period 1 - 2014
Sat 26 July to Fri 29 Aug = Period 2 - 2014
Sat 30 Aug to Fri 3 Oct = Period 3 - 2014
and so on..
(basic concept is to keep
4wk, 5wk, 5wk for Quarter 1
4wk, 4wk, 5wk for Quarter 2. and so on.. )
I have setup new planning calendar in MD25..
ie. min period, start of period not a working day, Calculation rule & Period etc...
then assigned new planning calendar in MM02 - MRP2 and also in MRP1 used Lot size PK... etc..
But when i Put demand in MC88.. which gives us std month format and transfer to DM, then Ran MRP but some how MRP is not creating correct Qty in planned demand as per new calender..
i.e.. 1 July to 31 July = period 1 - 2014 if total demand Qty for Material XYZ is : 50
I am expecting planned demand result in MRP as... Sat 28 June to Fri 25 July = Period 1 - 2014 - should be 50 in total.. but It's not..
Any reason? Or I am missing some settings?
Thank you in advance..
PC...

Thanks KK/Umesh
Business wants planning calendar in this format. And Fiscal Year Variant has also been set according to new calendar.
KK, Regarding MC88 there is no option to incorporate planning calendar into S&OP process. And Organisation's S&OP process is set from day one (Planning by ProdGrp/Material) so MD61 would not be a good option to use.
Umesh, regarding "start of period not a working day", I have selected "do not displace". And 27/09 and 27/12 dates are set holiday. The major issue here is: Not every 4th Sat of month is Period start day, MRP is picking new planning calendar (defined in above table) from the system But some how when transferring forecast data from planning table to demand management (MC88), system don't recognize new planning calendar and it distributes demand over weekly bucket per regular month Calendar instead of new planning calendar..
Some how I need to incorporate new planning calendar into S&OP setup somewhere, Any thoughts?
Thanks.
PC

Is there a way to create a calendar for keynote that automatically updates to current month?

I use keynote presentations for teaching foreign languages and wanted a calendar that updates automatically to current month everytime I present it rather than making it manually each month. I'm wondering if it can be done using the keynote date/time functions? Thank you.

Creating a whole interactive calendar for a month in a table could be done I suppose, but it's an awful lot of work for something that might be solved more easily in other ways.
IF you have a constant internet connection when you're teaching, create a Hyperlink on a blank Keynote slide to a web calendar, such as Google Calendar (or perhaps a school district calendar?) and enable it in the slide with Inspector, Hyperlink (blue circle with arrow icon 2nd from the right).
If you don't have web access on your teaching computer while you're teaching, I'd still probably capture a screenshot of the each monthly calendar and use that, updating to the current slide once a month. If you're usually too busy to remember to capture a new calendar on the first of the month, create a whole year of screen captured calendars at one time, add them to separate Keynote slides, and then just 'Skip Slide' all the months you aren't using. Not cool and interactive, but it would solve the problem. You might want to rename the screen captures to the month name before adding them as slides for ease of locating them later.
Since you're teaching foreign languages, in my sample below, I changed my default Google Calendar language to German. (Unfortunately, I left US Holidays enabled, so they aren't 'auf Deutsch', but you get the idea.) Understand that when you switch language in Google Calendar (or other Google app), it will switch ALL of your Google screens to that language, so be sure you remember which 'buttons' to push to change it back to English later!
Bring up your calendar onscreen in your browser and use Command+Shift+3 to capture the whole screen or Command+Shift+4 to capture just a portion of the screen. Once saved, insert the saved calendar into a Keynote slide.
Now, if that's more than you need, if you just want to display the date information in English as current weekday name, monthname, date number, and year, that's pretty simple.
Use the now() or today() function, you can create a simple table and add the following functions in separate cells, beginning each cell entry with the = sign (so the table 'knows' it's a function, and not just text:
=DAYNAME(NOW())
=MONTHNAME(MONTH(NOW()))
=DAY(NOW())
=YEAR(NOW())
And it displays like this on a slide:
Hope that helps!
Message was edited by: kostby

Problem in display of char. and key figure for yearly query

Hello all,
I got a query in which i have to do restriction on
Calendar Day/Month in Rows under Material which is a Characteristics
So it should be
                                                           PACKAGE QUANTITY
                                        JAN FEB MAR   APRIL.......DEC
PACK1
PACK2
PACK3
PACK4 for current year
PACK4 for prior YEar
Now the months display is not pre decided, it can be anything as per the input of user.
So i have to restrict it on Calendar month for Material twice
In current year , just introducing the Interval range variable
In previous year, same restricition with offset -12
Now the problem is while displaying it shows
                                       JAN'06 JAN'07 FEB'06 FEB'07 MAR'06 MAR'07........
PACK1
PACK2
PACK3
PACK4 for current year
PACK4 for prior YEar
Which is not desirable.
I only want value for Jan in one column
and for previous year and current year in different rows thats it.
If i remove Calendar year/month from columns there is no way I CAN DISPLAY MONTHS .
How to achieve this.
Please suggest.

Kartikey,
Rusty's suggestion wont work - using two characteristics for year and month will have the same effect as the position you are in at the moment.
ie..
2007     Jan.07     Feb.07    Mar.07   Apr.07
2006 -
Jan 06 Feb 06 Mar 06
If you have the posting period of 01 - 02 - 03 (just the period number only, no year) then your query will display
2007-01-02-03-04
2006-01-02-03-04
Regards
Gill

Need to display "Calendar Month/Year" at report level from Calendar Day

Hello Experts,
I have a scenario in which I have 0CALDAY (e.g. 01.01.2009) along with other fields available in my report. My requirement is to display "Calendar Month/Year" (01.2009) in my report. Is it possible to have "Calendar Month/Year" in my report from 0CALDAY, by making changes to the query, as I cannot remodel the underlying InfoCube.
Many Thanks,
VA

What you mean with huge - 100 Mio dataset?
The import of the new infocube will be also take a long time - the database must be insert a new field for every dataset.
=> is this a big infocube, then don't use virtual infoobjects.
=> on a big infocube is important to have a good datamodel - please insert always all 11 infoobjects for the time dimension.
Sven

Calendar for 5 years

Similar Messages

Maybe you are looking for