Calendar function not working in report launch form

We are currently using Headstart 6.5.3.1 for 9i. When we invoke the calendar function for a date parameter in the report launch form (qms0012f), we get the error-message ORA-6508: could not find program unit being called in PL/SQL Program Unit qms$calendar.show.
After closing the report launch form and re-opening it again this error message does not appear again and the calendar is shown without any problems.
Does anyone have experience with this error or know the reason why it is occurring?
Regards,
Gert de Boer

Hi dear
I am Santosh in New Delhi. Hope you will help me.
I M working with report 10G. My problem is that , I am not able to get normal character printing on Dot matrics printer and character mode report of report 3
Thanks

Similar Messages

  • SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.

    SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.

    SSRS reports are always best viewed in IE and the report result what you see in IE always will not be same and consistent in thirdy party browswers.
    So consider using IE as workaround.
    Also please refer:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/2188de10-cff9-4e24-b14f-da5121f1c4a4/ssrs-calender-control-not-visible-in-chorme-on-server?forum=sqlreportingservices
    Workaround here:
    http://www.rajbandi.net/Fixing-SSRS-Report-Viewer-control-date-picker-in-Google-chrome/
    -Vaibhav Chaudhari

  • Ago function not working in reports

    Hi
    I created a logical column using ago function,when I'm using this column in the report it throws the following error.I'm using 10.1.3.4.1 version of OBIEE.
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 22040] To use AGO function, the storage level of the query ('[TIMES.TIME_ID]') must be a static level. (HY000)
    SQL Issued: SELECT COUNTRIES.COUNTRY_NAME saw_0, SALES.AMOUNT_SOLD saw_1, SALES."Amount Sold LY" saw_2 FROM KNOWLEDGE WHERE (TIMES.CALENDAR_YEAR = 1999) ORDER BY saw_0
    Thanks
    Don.

    Hello Don,
    Have you set the chronological key for the time dimension ?
    Please refer the below post by Nico..
    http://gerardnico.com/wiki/dat/obiee/function_time?s[]=ago&s[]=function
    Same error it has been posted in below mentioned thread
    Re: Using the Ago Function
    One Request : Please if your post has been answered then please try to close the thread by awarding so that it can be helpful to others.
    thanks
    Edited by: user12116294 on Feb 4, 2011 5:18 PM
    Edited by: user12116294 on Feb 4, 2011 5:20 PM

  • Iphoto 8.1.2 calendar function not working

    Went to do our Christmas calendars and the calendar option no longer is responsive. I can create cards, or books, but not a calendar. How can this be fixed?
    As a side note, I had upgraded to iLife 11, experience significant photo loss and then downgraded back to iLife09.

    Steve
    Select iPhoto in the Applications folder and go File -> Get Info.
    In the Get Info window you can use the Plug-in pane to remove any 3rd party export plugins that you have not updated for v7.
    Also, if there's a plug-in there called
    FileExporter.iPhotoExporter
    remove it too, but if there's one called
    FileExporter2.iPhotoExporter
    make sure to leave that alone.
    Regards
    TD

  • "Find Form" calendar is not working after migration

    Hi,
    We have migrated from Oracle 9i to 10g.we have one form ''FormA" and "find form" for that FormA.Calendar functionality is present in both FormA and "Find FormA".if we try to use calendar functionality in "Find formA",its giving error like FRM-40104 - No such block calendar,FRM-40105(unable to resolve reference to item claendar.cell1.........),FRM-41045 (cannot find item - invalid id).Actually this scenario is not working after migrating the FORMS application to 'OAS10.1.2' from 'OAS904' .
    In 'OAS904' ,The calendar item is present in the 'FormA' form, the 'calendar.show' hides the "Find FormA" and appears in the FOrmA and uses FormA's calendar item and after selecting the date,the date s applied to the "Find FormA"
    But after migration, the "Find FormA" is not hiding, so its not able to retrieve the calendar properties.Because the calendar is present in "FormA".
    Any problem with pll files like 'qmslib65','qmsolb65',qmsevh65'??
    please help me by providing suggestions.
    Thanks

    qmslib65','qmsolb65',qmsevh65Are these libraries self-written or from some third-party tool?

  • Report launch form - implementation name?

    In the report launch form (qms0012f), no reference at all is made to the implementation name defined for the module. This attribute is mandatory when setting up the module definition (via qfd0016f), & according to the on-line help for this form it's used to specify the physical name for the module. We'd like to use it so we can have a generic report module, with separate module definitions for each menu call via qms0012f (& hence different parameters).
    Why hasn't this functionality been implemented?

    Cheryl,
    I'm sorry, on creation of Headstart 2.1 we added the implementation_name to the qms_modules table, but we just plain forgot to modify qms0012f as well. As most people have the implementation name identical to the module name, nobody noticed until you did!
    If you want to change this, you should modify library qms0012l.pll.
    Go to package qms0012f,
    find the declaration of g_short_name_item, and add a similar one g_implementation_name_item where 'SHORT_NAME' is replaced by 'IMPLEMENTATION_NAME'. In the same package qms0012f, find the function get_short_name_item and add a similar one get_implementation_name_item.
    Then go to package qms$report, function fill_par_list. At the end of this function, you will see a statement l_module_name := name_in(qms0012f.get_short_name_item);
    Change this into l_module_name := name_in(qms0012f.get_implementation_name_item);
    I am not able to test this, but I think it should work. Please let us know if this workaround helps, then we can include it in Headstart 6i.
    Hope this helps,
    Sandra

  • No color change for mandatory parameters in Report Launch Form

    Report Launch Form (qms0012f) does not color the mandatory report parameters when running on 9IAS webserver.
    We are using Designer 6i with Headstart 6.5.3.0.
    On client server the mandatory report parameters are changed to user preference color.
    Testing when running the form with the Developer Web Previewer of Forms Builder 6i the mandatory parameters are also changed to user preference color but the background color is white instead of gray?

    Cheryl,
    I'm sorry, on creation of Headstart 2.1 we added the implementation_name to the qms_modules table, but we just plain forgot to modify qms0012f as well. As most people have the implementation name identical to the module name, nobody noticed until you did!
    If you want to change this, you should modify library qms0012l.pll.
    Go to package qms0012f,
    find the declaration of g_short_name_item, and add a similar one g_implementation_name_item where 'SHORT_NAME' is replaced by 'IMPLEMENTATION_NAME'. In the same package qms0012f, find the function get_short_name_item and add a similar one get_implementation_name_item.
    Then go to package qms$report, function fill_par_list. At the end of this function, you will see a statement l_module_name := name_in(qms0012f.get_short_name_item);
    Change this into l_module_name := name_in(qms0012f.get_implementation_name_item);
    I am not able to test this, but I think it should work. Please let us know if this workaround helps, then we can include it in Headstart 6i.
    Hope this helps,
    Sandra

  • Issue is TEXT_IO application API is not working in report builder 10g.

    Issue is TEXT_IO application API is not working in report builder 10g.
    TEXT_IO application api is working in report builder 6i. (Not working in upgrade from Oracle EBiz 11i to Oracle Ebiz R12)
    I saw that details in some forums, client_text_io is available for form builder 10g.
    Is any other api available for report builder 10g?
    If it is available what steps we need to do?

    All the CLIENT_% procedures are part of webutil in Forms. Forms uses the Java applet on the client PC to perform actions on the local PC via webutil. This is not possible for Reports.
    You can still use text_io on the server, but you need some other way to copy the files to/from the client PC.
    I wonder how you used the functionality in EBS R11. Even R11 uses web reports, so text_io already worked on the server, not the client PC.

  • Debit/Credit Shift not working with report painter

    Dears,
    We have defined debit/credit shift while defining financial
    statement version. This functionality working well with F.01 however its not
    working with report painter results. any help will be highly appreciated
    Regards,
    FR

    Hi Dave,
    I have gone back to the books (JP Terry's "Creating Dynamic Forms with Adobe LiveCycle Designer") and think we can improve on things...
    var oFields = xfa.resolveNodes("ViolationsText[*].DebitVal"); // looks to resolve the repeating rows (I think)
    var nNodesLength = oFields.length; // assigns the number of rows to a variable
    var sumTotal = 0; // this is a temporary holding variable for the total, during the loop
    for (var i = 0; i < nNodesLength; i++) // this loops through as previous example
         if (oFields.ViolationsText[i].resolveNode("DebitVal").rawValue == "C")
              sumTotal = "";
              i = nNodesLength;  // stops the loop
         else
              sumTotal += oFields.ViolationsText[i].resolveNode("DebitVal").rawValue;
    this.rawValue = sumTotal;
    This would go in the calculate event of your Total Debit Points field. I would be amazed if it worked first time. I haven't run through LC. Give it a lash!! (a try!!)
    Good luck,
    Niall

  • Resetting parameters in the Report Launch Form (qms0012f)

    We ran into the problem today that the parameters in the Report Launch Form cannot be reset if they have no default value defined against them. In our situation this proved to be quite confusing and annoying for our end users, so we investigated the logic in the Headstart code and created a very simple solution: we added one character to the code in the qms0012l library. (package qms$param, procedure check_par_value.
    For the long story, see http://technology.amis.nl/blog/?p=925
    best regards,
    Lucas

    Gerard,
    "when using the LOV query (through Headstart Foundation Application) the user is forced to use the LOV
    and is not able to fill in the parameter field (field protected against update). "
    This behavior is intentional. The reason for this is that with Hsd6i, we added a display value that is different from
    the actual value of the parameters. However, in order not to break applications developed with older releases
    of Headstart, the LOV still lists the actual value is still listed first in the lov query. Since the first field in the LOV
    is not the field displayed on the screen, you cannot set Validate in LOV to true. So, the only option is to force
    users to use the LOV to enter data. If you do not have compatibility issues with older applications, you can
    set Validate in LOV to true and change all your LOV queries to put Description first and then value.
    "If I use the LOV, Value or Description width fields they generate an On Off behaviour. The values you
    specify are not important. When specified the LOV becomes screen wide, disregarding the specified
    widths. When cleared the LOV returns to it's initial behaviour. "
    I suspect this might be a new forms bug. I've logged a Headstart bug, just in case we can find a workaround.
    "The manual describes the use of GLOBAL variables for Default Value and Description.
    So far :
    the code for the default value will never work
    name_in(l_default_value)
    should be
    name_in(substr(l_default_value,2))
    in order to remove the colon.
    The code for the Default Description is totally absent."
    I have also logged a Headstart bug for this. We will need to investigate it. Certainly, the mechanism is working
    correctly, so I'm not sure what is going on here.
    Regards,
    Lauri

  • Drag and drop functionality not working. IE shows ActiveX error

    Hi all,
    we recently installed new server, but on the new server the drag and drop functionality in web dynpro application is not working.
    when we launch the standard test application wdr_test_drag_and_drop, the Internet explorer is showing a popup: An ActiveX control on this page might be unsafe to interact with other parts of the page. Do you want to allow this interaction? Yes/No
    if we allow by clicking Yes or No, the drag/drop functionality is not working.
    first I checked if the issue is with my IE version, but it is not working in any of the IE in any computer.
    when I checked the same application from different ecc server on my IE, the different server application is working.
    in my new server, do we need to do anything more to make the drag/drop working.
    thanks,
    Madhu_1980.

    Hi Madhu,
    GO through this link,  it might help
    Step 1: Go to the Tools menu, and select Internet Options
    There are times when the activex plugins are disabled in our browser settings, just enable them and give it a try.
    Regards,
    AkkI

  • Send & Recieve functionality not working with  WebDav after installing Acrobat XI

    Send & Recieve functionality not working with  WebDav after installing Acrobat XI for PDF.  Acrobat XI is complete installations(Trial Version).

    Hi Kiro ,
    Did you try opening that file in any other browser ?If not ,please try doing that once and see if that  works for you.
    Try Repairing Acrobat once and see if  that helps.
    Launch Acrobat>Navigate to Help>Repair Acrobat Installation.
    Regards
    Sukrit Dhingra

  • After upgrading to maverick; help & other functions not working

    After upgrading to maverick; help and other functions not working?

    Sometimes just closing and reopening the Help window will clear up the problem. If it doesn't, log out or restart the computer and try again. Otherwise, you may need to delete the Help cache.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Caches/com.apple.helpd
    Right-click or control-click the highlighted line and select 
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder selected. Move the selected folder to the Trash. Log out, log back in, and test. Help pages will be slow to load at first.
    If that doesn't work, the problem may be caused by network conditions. It may go away by itself, though I can't say how long you should wait.
       A persistent failure to load help data has been reported as an issue with satellite networks. Test on a different network, if possible. I've also seen at least one report that Photo Stream in iCloud can mysteriously interfere with Help. I'm not sure whether that's true, but try disabling Photo Stream, if applicable.*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

    Not able to sign into Blackberry Protect.  Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID."  My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone.  I can sign into Link, Blackberry.com and Protect.  I see my device in Protect but cannot send messages or view it on a map.  Times out with cannot reach device message.  BB Protect on Device has a swirling circle beside the on/of switch.  Cannot turn off.  
    I have deleted Link and re-installed.
    I have reset phone to default(factory) and signed in. 
    OS level is 10.2.1.3062
    BB Link is 1.2.3.56
    Solved!
    Go to Solution.

    I managed to figure this out myself. I had to delete the device from the Blackberry Protect website.  protect.blackberry.com.  I wiped my device again and signed in with my Blackberry ID.  I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete.  Restore is in progress for me!

  • Authorization Object is not working when report is modified.

    Hi BW Guru's
    We have Company Code as Authorization Object .and we have 3 company Codes (xxxx,yyyy,zzzz).where the users under Company code xxxx are not supposed to view company code yyyy,zzzz data etc.
    I modified an existing Report and transported to production.But the Authorization Object is not working for that report.The Report is defaultly displaying all the company codes data(xxxx,yyyy) for all the users.But for the other reports its(company code ) is working fine.
    What could be the problem?Is theproblem in transporting the objects.But i transported all the objects inluding auhorization object.
    Please send me the solution as it is very much urgent.
    The solution will be def. awarded with full points.
    Regards
    Sanjay

    hi Sanjay,
    please don't post the same question again, check and response back from your previous thread
    Re: Authorization Object is not working when report is Modified.
    hope this helps.
    would be nice if you reward for helpful answers to all of your previous postings, e.g
    docs related to RRI

Maybe you are looking for