Calendar function question - somebody must know out there...

Any organization has meetings scheduled once a month, recurring on the third Wednesday ... or once a quarter on the first Friday. I can't see how to do this in Calendar. It's gotta be there, right? Please tell me I'm blind and solve my dilemma. Thank you very much.

It doesn't appear that they have this option yet. It is available in iCal so maybe it will come in an iPhone software upgrade down the road.
In iCal, at the bottom of the same list that comes up in iPhone for repeat events, there is a Custom option. From there you can select "every 2nd Tuesday" etc.
I know this isn't the answer you wanted.
Can you input these repeat items in whatever calender software you use on your computer and then sync it to your iPhone? At least until Apple adds this function to the Calender app on iPhone?
Good luck!

Similar Messages

123 people are aware of this problem so somebody must know somethin!

I have the fish fillet clutch of AU effects, you know the ones Block Fish, Spit Fish and Floor fish. The other day on loading my Logic Pro 7 the AU crashed and would not load the Floor fish but the other two load ok I have had this problem before and I took a drastic measure of stripping my mack of 10.4,11 and built everything up again upon which it worked again. (before doing this i tried countless times to repair permissions Zap pram optimize the home drive reload Logic Pro 7 no Joy)
I am wondering how I can remedy this fault within Logic as in wave burner and garage band and Bias Peak5 I see the whole lot no problem. I have Logic Pro 7.1.1

Ok. I recently had this problem too. If you are running Norton, it is most likeley the problem. When I checked the history on Norton it said that even though I let the plugin-container.exe run, it still decided to quarentine it. Obviously, if that file isn't in the firefox files, firefox isn't going to run. Go into Norton and tell it to restore that file(if you are sure it is from firefox not a real virus. haha) and it should work again.

Somebody must know whats going on with PAL 720p HVX support !

Ok this is getting really really anoying !
Why has apple not mentioned anything about supporting PAL 720p in FCP ?
Just a simple where on the case would be nice but no, nothing.
I hate this kind of attitude and it severly hurts my investment in this camera and format.
Why was it so easy to provide ntsc support but us pal owners are left feeling ignored.
Just freeking tell us whats going on ............. aaaaaaaarghhh
-matt
G5 Dual 2.3 Power Mac 4 GiG RAM Mac OS X (10.4.5)

720p25 is no officially supported format in general.
Only 720p50 is a real standard. However there is a
so called 2:2 pulldown where you double the frames,
also called 25p over 50p. This only concerns a
transparent video signal via HD-SDI. Speaking about
the Panasonic HVX200 is another story as this is a
file based workflow.
Here you can find an article how to capture, edit and
monitor 720p50 in FCP 5.1:
http://www.aulich-adamski.de/en/perm/720p50-capturing-editing-in-final-cut-pro
This is also helpful for JVC GY-HD users that could use
an HDV to HD-SDI converter.
An second article describes the Panasonic P2 workflow
with 720p25 and 72p50 but it's currently only in german:
http://www.aulich-adamski.de/perm/panasonic-ag-hvx200-720p2550-p2-workflow-mit-f inal-cut-pro

Imovie question someone must know the answer

I have imovie 8 I take video with my lumix camera . I Download to iphoto
I open imovie and it asks if i want to create thumbnails and I say now
in my event library i see iphoto
I click on iphoto
the videos import ok but in the event library they are not listed individually just 1 thing iphoto
any ideas why ???

just did a test
I created a video with the isight camera on my mac. When it was done it did create dated folders in the event list left side .
Guess its only video imported from iphoto that all go under the heading iphoto and do not separate by date or title
mabe something in the imovie software got changed

Somebody must know

I've got QuickTime Pro (version 7.2) with the MPEG-1&2 codecs installed (for QuickTime version 6.4 and later). I can play MPEG-1 videos, but MPEG-2 files have either no video (displays white) or I get a message saying the file isn't a movie file.
Is the MPEG-2 codec compatible with my Intel machine? Is QuickTime 7.2 buggy?

The MPEG-2 Playback Component has been updated and is now version number 6.4.1.
Older versions will not work with QuickTime 7.
You can get a new copy at no charge by logging in at the Apple Store and reviewing your account history (Downloadable software purchases link).

Caps defines shouting! "ARE THERE ANY APPLE TECS OUT THERE"

Yep I'm really peed,
So far I have dropped four threads on this forum regarding basically the same problem and got 0 yes 0 responses, It's funny, on other apple forums there's always a response this really begins with an S and finishes with an S, and sound similar to duck.
Jan 21st Played yesterday black today. Feb 28th Intermittent white outs march 8th Movie can't be saved now today another white out 85%.
So, what happened this time? I created photoshop psd file in photoshop cs, file sizes were 774 px x 480 px at 200 resolution I animated said files in Image ready and saved as QT's I also used Norcross morphx and saved those as QT's.
Inspector read; yesterday a mini mov Today final mov
Format: Apple photo-jpeg 774x480 mil H.2.64, 774x480, mil
FPS: 20 9.26
playing FPS: (available while playing) same
Data size: whatever size the file was 247.51 MB
Dat rate: 6079.93kbits/s 8.17 mbits/s
Currant time 0:00:00:00.00 0:00:02:44.60
Duration: 0:00:00:01.50 0.00:03:46.29
Normal size 774x480 pix same
currant size: 774x480 pix same
Prior to saving I checked properties-resources on final movie.
Older unworkable movie Today's
video track 1 of 6 will not enable video track 2of 2 will not enable
is a j-peg is a j-peg
others R mix peg/Ap-pix-vid other is a H.264.
On the past saved movies that I had problems w, in properties/resources/source it shows many sources of the mini movies that were used to create the final large movie, when I click them, they open as the mini they are, except for one which titles as unavailable.
On todays movie it shows movie title source (won't open) and one other which opens as only one of the mini's I used, the others are not there.
Yesterday I cleaned out all other movies players Avi/real etc I also dumped QT ran disc utility. I then re-downloaded QT , Perian and Realplayer redid all my art created new mini's made my animation movie, it came out great and today I have %^%.
My first question is does
QT work w/photoshop/psd's that are opened in Image ready converted to animations then saved as QT"s
2. Doe's QT have problems w/200 resolution (which it converts to 72 and make the screen larger)
3. Does QT work w/Norkoss morphx morphs that are saved as QT's
3. Is there a problem w/saved morphs in QT and saved Adobe files in QT.
4. FileXaminer could not find files titled unavailable.
My reality is that as a process adobe/QT seems great, as a finished product, It's been "a highway to ****". I was going to give my QT to my kids to play around with (what was I thinking)
I guess the real question is, does anyone out there have a clue what's wrong with my process or what I am doing wrong, and why is my hair getting white.
This is really a last ditch effort!!!!!!!!

I hope I am not driving you crazy, I still have a couple more questions to enable me with a better understanding and also to understand if it is possible for me to get a better pic than a gif.
a. when I open swf files in swf player and convert them to images they save as tiffs, as you mentioned w/MorphX that also saves as tiffs.
b. The psd's when I compared size to a mov showed psd 10.1 MB mov 480kb big difference as they are 3 sec files. I took the same psd and saved it as a tiff 10.1 MB.
So, the problem here as I understand it is that the file size per second is to big as in the MorphX 2.3MB per sec but, if I take the 20 layers of the Morphx as tiffs/psd's and each one is a separate file I could import them directly through image sequence to QT. What I find confusing is they are still the same MB size per second.
You know what Kirk, if that's what it takes then that is really to much time and effort to try and get a decent animation I can't even begin to think of how many flat files I would have to create for a four minute animation. Actually I can 4 mins = 240 secs x 20 files = 4800 aahhh
thanks for your help anyway mate.
Gary

Functional Location field is Grayed out in change mode

Dear Experts ,
I have created an equipment automatically through serial number managed material .
But the equipment created has no functional location assigned to it .
Also when in change mode of the equipment the functional location field is grayed out & there is no provision to dismantle & reassign the same .
Pls tell me how can i assign a functional loaction to this automatically created equipment ??
Regards
Anis

Hello Thyagrajan ,
In IMG ...
Equipments --> Equipment Uasge Period --> Define Installation at functional Location
I have put a tick for the checkbox " Inst . at Func. Loc" against the said equipment category
Is ther anywhere else in IMG that i need 2 assign/check .
while trying 2 assign a functional location for this equipment the system give the error :
No InstallLocation entered: Data transfer not possible
Message no. IA036
Regards
Anis
Edited by: anis bazmi on Oct 26, 2009 9:48 AM

My ipad mail is synced to my iMac mail account. On iPad, I can only see my inbox and sent messages. I can't see any of the folders I have created on my iMac. How do I do that? Probably a dumb question, but I know there's a lot of smart people out there!

My iPad mail is synced to my private email account, which I organise on my iMac. On iPad, I can only see inbox and sent messages folders, not any of the other folders in my email account I have created on my iMac. How do I get iPad to show my other folders? Probably a dumb question, but I know there's a lot of smart people out there.

If you select a mailbox, you should get an Edit button (easier to see in landscape mode). Clicking the button will provide you with check circles for the messages. You also get Delete and Move buttons at the bottom. Check the messages you want to move and then navigate to the mailbox you want to drop them into. I think as long as you can navigate to a mailbox you can move the messages to it.
In the Mac Mail application and probably Outlook on the Windows side, you also setup rules to move messages to specific mailboxes. If the mailboxes are stored on the server, then you can have the sorting done on the server and they should appear that way on the iPad. If your later messages do not show up, you may need to have the iPad app pulled down more messages until they are all showing.

HT201303 Do any of you apple geniuses out there know how to retrieve the answers to your security questions or at least reset them? Apparently its to much for the support team. Can't get an answer out of them...

Do any of you apple geniuses out there know how to retrieve the answers to your security questions or at least reset them? Apparently its to much for the support team. Can't get an answer out of them...

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
Go to: Apple Express Lane;
Under Product Categories choose iTunes;
Then choose iTunes Store;
Then choose Account Management;
Press Continue;
Now choose iTunes Store Security and answer the bullet questions, then click Continue;
Sign in with your Apple ID and press Continue;
Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
Click Send.
You should get a response within 24 hours by email.
Presently there appears to be problems on Apple's end, so it may be quite some time before they respond.
Another user posted the following:
I got some help from an apple assistant on the phone.
It is kind of round about way to get in
Here is what he said to do and it is working for me...
1) on the device that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
2) Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
3) sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit /debit card and NOT the security questions.
4) At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

Somebody out there?

There must be somebody out there who knows how to find or recover Disk Utility icon, lost after dropping DiskWarrior 4.1 into the Utility folder. Thank you for your time!
W.W.

Is there a Restore feature on the Installation DVD?
Yes, but you don't need to do that. There must have been an update to Disk Utility between the initial release of Leopard and 10.5.2. Which means you need to apply the update through Pacifist in order for it to work correctly. But that needs to be done a particular way itself. Follow these steps.
1) Delete your non functioning copy of Disk Utility from the hard drive.
2) Use Pacifist to install Disk Utility from the original Leopard disk. Don't just drag it out of the Pacifist window, use the Install button at the upper left.
3) Close the window for the original Leopard disk without closing Pacifist.
4) Drag and drop the 10.5.2 Combo updater package onto Pacifist. Extract the package file from the combo .dmg download first if necessary.
5) Locate Disk Utility and and click the Install button in Pacifist.
6) Here's the important part. Pacifist will inform you that Disk Utility already exists and gives you a few choices what to do. Make sure to choose "Update". That will install only the updated components between the original disks and the updater.
That should do it.

Not rally a question, just wanted to share my absolute frustration with the update of iTunes...this is, without a shadow of a doubt THE WORST application i have EVER used, Mac or PC! And that's saying something with the amount of PC dross that's out there

Not rally a question, just wanted to share my absolute frustration with the update of iTunes...this is, without a shadow of a doubt THE WORST application i have EVER used, Mac or PC! And that's saying something with the amount of PC dross that's out there...Apple...PLEASE update and give us back the old version of iTunes...

Pull down View > Show Sidebar. This will give you back the same functionality of iTunes 10.x.x.

Hi there how are you guys out there of this forum? I got a question for y'a

Hi there how are you guys out there of this forum? I got a question for y’all
I wanted to know how I could record different folders using iTunes
Cause when recorded 2000 thongs on the DVD
There were 2000 songs to go through
So I really wanted to have had folders and then the music recorded inside them
So I could get right to where I wanted real quickly
Could anyone please teach me how to do that real quickly?
Can we do it with iTunes?
I know we can do it with Nero.

1) Go to file, select new playlist. Creat the playlaist.
2) Download your music into iTunes.
NOTE: CHECK 'Recently Added' before you download your music.
If the select boxes has a check in them, turn it off by
holding down the 'ctrl' key and selecting one of the
checked boxes. This shold turn off all the checks.
It would be better to clear 'Resently Add' of all
previous downloads, but I don't know how to do that
yet.
3) under 'PLAYLIST' on the right, select 'Recently Add'.
all of your song should show there with a check in the selection
box.
4)Hold the shift key and select the frist (selete records name),
then the last recorded tune. All of the recordings shouls light
up blue.
5) While holding the 'shift' key, drag one of the records to your new
playlist. All of the blue highlighted song will transfer to the new
playlist.

Hi there! yesterday I installed Mavericks on my Macbook. Since then, it doesn't mount my external hard disk drive anymore, which he did a week ago (without the update). Is there anyone out there who knows a solution?

Hi there! Yesterday, I installed Mavericks on my Macbook. Since then, it doesn't recognize my external hard disk drive anymore (at least not on the desktop. In Germany they call it "it doens't mount it". I don't know if it's the same expression in english?)
I just used it a week ago, before I did the update and it worked perfectly fine.
Is there anyone out there who knows a solution for this problem? I've been googleing for hours now and can't find any answer.
Thank you!!!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Does anyone know how well the Intel Iris Pro installed on new 15" MacBook Pros performs using Photoshop and Lightroom. I have seen some differing opinions out there, and I would rather not shell out the extra cash for the Nvidia if I don't have to. I most

Does anyone know how well the Intel Iris Pro installed on new 15" MacBook Pros performs using Photoshop and Lightroom? I have seen some differing opinions out there, and I would rather not shell out the extra cash for the Nvidia if I don't have to. I mostly do photo editing for business and personal use. I have not used the 3D function in Photoshop, but I would like to know that I could.

You could download a trial and see how well it works before committing to a subscription. You get 30 days to decide.
Photo editor | Download free Adobe Photoshop CC trial
Photo editor app | Download free Adobe Photoshop Lightroom 5 trial
Gene

Multi-master replication questions for iPlanet 5.0, gurus out there?

hi:
I'm using iPlanet Dir Server 5.0 and I note that many gurus out there has
been able
to get this to work, that's good, but I have yet to. I have several
questions, maybe
someone can spend a few minutes and save me hours...
I have a suffix called dc=calient,dc=net. I followed the suggestions in
the
iPlanet install guide and created 2 directory servers
a) suffix o=NetscapeRoot, at some arbitrary port, 4601
b) suffix dc=calient,dc=net, at the usual port 389.
All my searches/create/delete work fine. However, when I try to replicate
with multi-master between 2 machines, I keep getting into problems.
Here's one set of questions...
Q1: do people out there really split their tree from the o=NetscapeRoot
tree?
Q2: The admin guide says the the unit of replication is a database, and
that each replication can only have 1 suffix. Is this true? Can
a replicated db have more than 1 suffix?
Q3: If I also want to replicate the o=NetscapeRoot tree, I have to set
up yet 2 more replication agreements. Isn't this more work? If
I just lump the 2 suffixes together, wouldn't it be easier? But would
it work?
Q4: I followed the instructions to enable replicas on the masters.
But then I tried to create this cn=Replication Manager, cn=config
object.
But what is the object class of this entry? An iPlanet user has uid
as its RDN... I tried a person object class, and I added a password.
But then I keep getting error code 32, object not found in the error
log. What gives? such as
WARNING: 'get_entry' can't find entry 'cn=replication
manager,cn=config', err 32
Q5: Also, are there any access control issues with this cn=Replication
Manager,
cn=config object? By this I mean, I cannot seem to see this object
using
ldapsearch, I can only see cn=SNMP, cn=config. Also, do I have
to give all access via aci to my suffix dc=calient,dc=net? Also,
given the fact that my o=NetscapeRoot tree is at a different port (say
4601),
not 389, could this be an issue?
Q6: when replication fails, should the Dir Server still come up? Mine does
not anymore
which is strange. I keep getting things like this in my log file
[08/Nov/2001:21:49:13 -0800] NSMMReplicationPlugin - Could not send consumer
mufasa.chromisys.com:389 the bind request
[08/Nov/2001:21:49:13 -0800] NSMMReplicationPlugin - Failed to connect to
replication consumer mufasa.chromisys.com:389
But why shouldn't the dir server itself come up even if replication
fails?
steve

Hi Steve,
First, please read the 'Deployment Guide'. I think that is easier to
understand when you want to setup multi-master replication. The
'Administrator's Guide' gives you step-by-step instructions, but it may
not help you to understand how to design your directory services.
Stephen Tsun wrote:
I have a suffix called dc=calient,dc=net. I followed the suggestions in
the
iPlanet install guide and created 2 directory servers
a) suffix o=NetscapeRoot, at some arbitrary port, 4601
b) suffix dc=calient,dc=net, at the usual port 389.
All my searches/create/delete work fine. However, when I try to replicate
with multi-master between 2 machines, I keep getting into problems.I don't understand something: which backend do you want to replicate?
The one holding 'o=NetscapeRoot' or the one holding 'dc=calient,dc=net'?
Do you want to setup replication between these two instances of the
directory server (i.e. between port 4601 and 389 in your example)?
Q1: do people out there really split their tree from the o=NetscapeRoot
tree?If you have multiple directory servers installed in your environment, it
is probably worth dedicating (at least) one directory server for the
o=netscaperoot tree.
Q2: The admin guide says the the unit of replication is a database, and
that each replication can only have 1 suffix. Is this true? Can
a replicated db have more than 1 suffix?Well, it is normal, since in iDS 5.x you have 1 suffix per database.
You can, however, replicate multiple databases.
Q3: If I also want to replicate the o=NetscapeRoot tree, I have to set
up yet 2 more replication agreements. Isn't this more work? If
I just lump the 2 suffixes together, wouldn't it be easier? But would
it work?You can't lump the 2 suffixes together, because each backend has 1
suffix associated with.
Q4: I followed the instructions to enable replicas on the masters.
But then I tried to create this cn=Replication Manager, cn=config
object.
But what is the object class of this entry?Usually, it is organizationalperson or inetorgperson. In most of the
cases you want an objectclass which can have userPassword attribute.
An iPlanet user has uid
as its RDN... I tried a person object class, and I added a password.
But then I keep getting error code 32, object not found in the error
log. What gives? such asYou must have misconfigured something. Or perhaps, it is not
cn=replication manager, cn=config, but 'uid=replication manager,cn=config'
Q5: Also, are there any access control issues with this cn=Replication
Manager,
cn=config object? By this I mean, I cannot seem to see this object
using
ldapsearch, I can only see cn=SNMP, cn=config.The configuration tree is protected by ACIs, so you can not see them
using anonymous BINDs. Try binding as 'directory manager' and you will
find your entry.
Also, do I have
to give all access via aci to my suffix dc=calient,dc=net?For what purpose? For replication, it is enough to set user DN in the
replication agreement and this user can update the replicated backend.
Q6: when replication fails, should the Dir Server still come up?Yes.
Bertold

Calendar function question - somebody must know out there...

Similar Messages

Maybe you are looking for