Calendar gone in list mode with 4.1

After updating to 4.1 on my 3G iPhone, the appointments are all blank in List mode. They appear briefly then go blank. Going to Day or Month and back to List restores them.
Anyone else seeing this or know how to fix?

I rely on the iPhone calendar a lot. With some trepidation after reading this thread, I just updated to 4.1. I use mobile me calendar. Now, when I touch the iPhone calendar, it opens up in List view, then goes blank, then the spinning wheel starts, then back comes the List view. This all takes approx 2 seconds in toto as opposed to maybe 8 seconds before I updated the software. Fortunately I don't have the problem that some of you have in needing to swap back & forth between Views to get the List view to come up. Maybe it works better with mobile me than with other calendars?

Similar Messages

My current project in the events library has gone into list mode. ie a single clip on the left, one above another, so showing only about 7 clips. how can I get it back into normal horizontal mode

My current project in the Events Library has gone into list mode. ie a single clip on the left one above another, so showing only about 7 clips. How can I get it back into normal horizontal mode?

That's about what it's supposed to look.
How do You want it to look ?
a. You can change places by using this
b. May be You changed this top right symbol of an hard disk ?
c. or changed the number of frames to be viewed ?
d. OR - it can (at least for me) be so that You think of how it looks in iPhoto. (To me a very common mistake)
Yours Bengt W

When calendar is in list mode events show wrong day

when i am in list mode the events show one day later than in day or month mode

Welcome to Apple Discussions,
However, when my MacBook Pro goes to sleep, the networking shuts down, and no emails are sent until I get to work and wake it up.
Hm. True enough. It wouldn't be asleep if it was still sending out emails in the background
1) Is there a way to get iCal to send out reminders when the computer is sleeping?
No way that I know. Sleep by definition means the computer's functions are suspended. The system would have to wake, spinning up the hard drive and loading the OS so that iCal could then trigger an email, and then go back to sleep.
2) If not, is there a way to forward my iCal events to Google Calendar? I can download Google Calendar to iCal, but I can't seem to push stuff to Google Calendar.
If you add your Google Calendar to iCal you should be able to put all your events into that calendar. That calendar is CalDAV so it will be updated on the Google server and then also update any other systems that are reading that calendar (Linux and otherwise)
If you are unable to make changes to your Google calendar in iCal I would suggest you remove it and re-add it.
Hope that helps.

In ios 7, how do I get the calendar to open each time in list mode?

In ios 7, on the iphone 5, how do I get the calendar to open each time in list mode? It always opens is strange new mode and goes to list mode only if I click the search icon.

For some weird reason beyond my comprehension, and I am a smart fellow I think; Adobe starting with acrobat/reader 8 has decided to hid the menu icon Ribbon (i guess you would call it) until you have a PDF open. In versions past if you had these icons on the screen you could actually use them to open Pdf's or create pdfs from scans.
Pesonally for me its a dumb idea. But was justified as allowing for more screen area to view. The guy that thought up the idea should be taken out behind the barn and given 10 licks for stupid ideas. :-)

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

What are the minimum requirements to successfully Synchronize a SharePoint 2010 Calendar or Task List with Outlook 2010?

What are the minimum requirements to successfully Synchronize a SharePoint 2010 Calendar or Task List with Outlook 2010?
SharePoint permission levels required for the user profile?
Does the user need top level permissions on the SharePoint site?
What other minimum requirements must be met for Outlook 2010 to synchronize successfully with SharePoint 2010?
TheDrape

Hi,
To synchronize these libraries and lists, you must have Outlook 2010 installed on your client computer and you must have Collaborate permission to the library or list.
You don’t need any permissions for the user profile.
I provide you a link about synchronizing SharePoint 2010 content with Outlook 2010 for your reference:
http://office.microsoft.com/en-us/sharepoint-foundation-help/synchronize-sharepoint-2010-content-with-outlook-2010-HA101881295.aspx
Thanks,
Rock Wang
Rock Wang TechNet Community Support

How can I transfer old Palm Pilot (Z22) info (calendar/to do lists/memos/contacts is synced to a Windows XP) to a program I can access with an iPod?

How can I transfer old Palm Pilot (Z22) info (calendar/to do lists/memos/contacts is synced to a Windows XP) to a program I can access with an iPod? Thanks.

Maybe by the link provided here:
Palm Desktop and iPhone

How do I put calendar in list mode

I want to set my calendar to stay in list mode. did once by accident. how do I do it?

Hello acraftersdream,
The information below details how to go about displaying a list of events.
View a list of events. In month view, tap to see a day’s events. In day view, tap .
iPhone User Guide - Calendar at a glance
http://help.apple.com/iphone/8/
Cheers,
Allen

Is it possible to have a calendar and reminder list with the same name?

I migrated from MobileMe to iCloud on the first day. MobileMe was then set up with my MacBook and so in iCal i saw my calendar events duplicated. I didn't like this so I tried deleting the MobileMe calendars first, then realised I couldn't delete all of them, it seemed that I must have one calendar. I then removed the the account setting (which would have been the smarter thing to do). A few hours later I notice that the calendars I deleted from MobileMe have been deleted from iCloud, as well as associated task/reminder lists. Luckily for me I made a backup before moving to iCloud so I've managed to recover my calendars.
My question is: Can I make a calendar and reminder list by the same name?
After the migration I did have some calendars and reminder lists by the same name eg. Work, Home.

T-Storm, I'm having the same annoying delay on my X-Fi Extreme Gamer card, it's driving me nuts trying to fix it.
I noticed that if I un-tick the Dolbly Digital Li've in the console it goes away, along with the 5. sound, %$*&^^&%!
Is it he same with you? Try un-ticking the DDL while playing something and see if it stops the delay or not. At least it will see if the problem is the card, the connection, the optical cable, or DDL itself.
Dolby Digital Li've works in real-time so I fear that is causing the delay rather then a bad cable or connection. But I don't know if others are getting the same delay or not, if it is DDL then everyone should be getting it.
But, if they are not trying to play a digital signal at the same time as a anolog one they might not notice it.

Amplitude Array with niFgen Frequency List Mode

I was wondering if there was a way to easily set a different amplitude for each frequency in a Frequency List? Ideally I would want this to be in an array.
When using Frequency List Mode, you can define the frequencies and durations in an array using the Create Frequency List VI:
However the Configure Frequency List VI only allows you to specify a single value for the amplitude:
The only approach I can think of is using Property Nodes, however that seems like it will be an exact solution. Trying to increase the amplitude (or gain) "on-the-fly" seems to cause discontinuities and has some delay before taking effect.
I am looking for something similar to this example, except with another column for unique amplitudes for each segment of the list:
Does anyone know how I might go about this? Any approaches/ideas will be greatly appreciated! Thanks in advance!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If someone helped you out, please select their post as the solution and/or give them Kudos!

Hello,
With the Frequency List mode, you are limited to outputting varying frequencies of a standard function at a certain amplitude. To do what you're describing you would want to use either Arbitrary Waveform or Arbitrary Sequence mode with a capable card instead. A good example of doing this on the fly with Arbitrary Waveform can be found here: https://decibel.ni.com/content/docs/DOC-8391.
Matt Lee
National Instruments
Applications Engineer

Problems with manually renaming files in List Mode

I have an iMac 24" 2.4 Ghz with 4 Gb of RAM. Sometimes when I try to rename a file in a folder in List mode, I get unexpected and strange behavior. It is intermittent. It might be that I cannot get the highlighted current name to unhighlight (in cases where I only want to change a portion of the name), or the filename box might disappear, or the folder seems to lockup, or I get blocks every other space instead of letters. Weird, strange results. I do know that I can minimize the problem, if when first entering the filename box (by hitting 'return') I move the cursor via the cursor keys to the right over the extension and then back to the left. When I do that, it seems like I have less problems.
All I can say is that it doesn't seem to be a robust as what I was used to in the Windows world. I'm new to Mac and this is the only complaint I have. I'm ecstatic about my Mac and can't believe I waited this long to convert over to it. If I could get this little glitch fixed, I'll be a 'happy camper'! (the problem's certainly not enough to make me go back to the misery I was in with Microsoft.)
Has anyone else experienced any problems such as this? Or, is there a possibility that there is something wrong with my Mac?
Or, am I doing something wrong?
Thanks for any kind help I receive.
Matt

Finder for Intel is the same as Finder for PPC. Its the same code, sans some endian conversions.
As for the renaming problem. Two things come to mind. In Tiger if you selected a file and pressed return, no matter what view style you were in, it would bring up the edit field and the entire name would be highlighted. In Leopard, this was changed slightly where it will now highlight everything up to the file extension. So if you have a file called 'foo.txt', it will highlight just 'foo'. This is a nice feature IMO because more often then not I don't want to change the file extension, only the 'body' of the file name.
The Edit box disappearing is a bug that has been around for a couple OS releases where if something causes the view to update (more specifically the HIDataBrowser control List View is made of) while your renaming something, it will cancel the rename session. This can be caused by a bunch of things, like the size of a file changing or mod date changing or file being added to the directory etc. It has been around for a while, but has only become more prominant due to the addition of Icon Thumbnails in Leopard. When the thumbnail is created for the file by the Finder, List View updates to show the new thumbnail which cancels the edit session. There are a couple workarounds for this:
1) Switch to Icon or Column View
2) Wait for all the thumbnails to be created before starting to edit file names. Thumbnails appear pretty quickly, and only for the files that are currently visible in the window, so you shouldn't have to wait very long, and it only happens the first time you view that folder.
3) Press Command-J while in List View and uncheck "Show Icon Previews" and then click the "Use as Defaults" button. That will turn off the icon thumbnails for all windows in List View.
I haven't seen a problem with "blocks showing up every other space" though. I assume you mean a solid black square, right? Sounds like an invalid character in the file name. Renaming the file to something else should cure that one.
Message was edited by: petrock

Why does Calendar not go back to all entries in list mode after upgrading to iOS 6?

Why does Calendar not go back to all entries in list mode after upgrading to iOS6?

I have an iPhone 5 running at iOS7.1.1. The Calendar list mode previous to iOS 6 showed all past entries, which I found very useful. After the upgrade, it only showed the previous 12 months (as I recall). All past entries are still present, you just have to exit list mode to see them. I'm asking this now after finding the forum for the answer to rediscover the list function in iOS 7.

How can I sync up MAC calendar And Contact List with MS Outlook?

I need help in syncing up my Calendar and Contact list, ( version 7.0), with MS Outlook (2011 Version: 14.3.2)?
Thank you for any help.

What Mac do you running what version of OS X?

HT201364 I'm trying to restore my iPhone 5 and its gone into recovery mode and won't go out I've gone on to iTunes it says that its in recovery mode and to restore it after about 10 seconds it come up with could not restore unknown error occurred (9) i wo

im trying to restore my iPhone 5 and its gone into recovery mode and won't go out I've gone on to iTunes it says that its in recovery mode and to restore it after about 10 seconds it come up with could not restore unknown error occurred (9) i wonder if you could help

you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
If that does not work, take in for service
Genius reservation http://www.apple.com/retail/geniusbar/

IPod5 has suddenly gone into a mode that Speaks everything and I can't scroll

iPod5 has suddenly gone into a mode that Speaks everything (i.e. "screen dimmed", "screen locked", "Calendar, Monday, May 13th, double tap to open", and when typing, "a, alpha, r, romeo" etc.) but I can't scroll anywhere and I even have to highlight and then double tap to type each letter when typing - even to enter my password to unlock.
How do you turn this off?

I found this in another discussion.
Check: Settings - General - Accessibility - VoiceOver = Off.
Please note you will need to use 3 fingers to scroll to various menu items.
This worked but I found it diffucult to scroll even with using 3 fingers.

Calendar gone in list mode with 4.1

Similar Messages

Maybe you are looking for