Calendar hang up after 10.9.2 upgrade

Following message from computer after it tried to sync calendar with i cloud:
'Access to account; 'i cloud' is not permitted.
The server responded '403' to operations.
CalDavMigrate to server Queueable Operations'
Any ideas for a resolurion.

Hi steveb219,
Thanks for visiting Apple Support Communities.
If you receive error messages when syncing iCloud with Calendar, I recommend the steps in the "Troubleshooting on OS X" section of this article:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Best Regards,
Jeremy

Similar Messages

  • Windows hangs boot after upgrading any software

    Hi,
    My Windows 8 Pro x64 Dell XPS8500 machine developed a really weird problem.  (The problem actually began a while back - first noticed maybe 4-6 month ago - but only now trying to fix it.)  It re/boots fine so long as I don't try to install anything. 
    However, installing any software upgrades causes Windows to hang on boot.  The software upgrades that I tried are Evernote, iTunes, Java VM, and all of them are triggering the same behavior.  All this aforementioned software seeming doesn't have
    anything in common.  The only known upgrades that do not appear to trigger the issue are Firefox and Chrome (where upgrades happen more or less in passive fashion)  There is no clear event that I can recall in the past that I can attribute this happening
    to (i.e. I can't pin point to something like installing a driving and it failing immediately afterwards) - just one day a message popped up to upgrade iTunes, which I did, and then rebooted to experience the issue.
    Here are the steps to describe what happens with a bit more detail and troubleshooting steps tried:
    Manually launch upgrade of an existing software. (Tried Evernote, iTunes, Java VM)
    Successfully go through the install/upgrade.  Seems irrelevant if software asks for reboot or not.  Machine works fine until rebooted.
    Reboot the machine.  Machine shuts down without any issues.
    BIOS POST is successful, and Dell logo with jumping/circulating dots comes up.
    There is a normal flurry of hard-disk activity for a few seconds, which after a few seconds reduces to none or sometimes/occasionally to very brief flashing a few seconds apart.  This is where the problem is noticed.  It can stay like that for
    hours if not days (normal boot takes about 20-30 seconds).
    Typically, if there is no hard-disk activity at all, pressing the power button causes one brief flash, followed by one more about 1-3 seconds later, and no change.
    The only recourse is to force turn off by holding power button for few seconds.
    Letting it try to boot again leads to the same behavior.
    Repeating attempts to boot 3-4 times causes Automatic Recovery to kick in.
    The only way to get the machine to boot again is to use Recovery to restore to a previous state.  This sometimes requires to be done more than once and doesn't fix on the first try. 
    (Also, I enabled Win boot menu, and couple of times instead of waiting for Automatic Recovery to kick in, tried to use recovery through the menu - in that case it's more likely to require the procedure to be done more than once).
    I tried to do a logged boot to capture log file in one of the cases where it boots - it appears to never produce \Windows\ntbtlog.txt file (possible I didn't do something right for this one, though I thought that file is never deleted and only grows)
    Additional Info:  SysRestore currently displays only two available points:
    6/13/14 - Installed Evernote v. 5.4 - Type Install
    6/9/14 - Automatic Restore Point - Type System
    All other previous restore points (from having installed a few more updates and software in the 1.5 years I had the machine) are gone somewhere.
    Choosing to revert to the second restore point (when selecting restore point from boot menu) as opposed to the first one and later booting successfully, for some reason the same restore points are listed again (so it doesn't seem to be truly reverting)
    Nothing fruitful appears in the EventLog.  The only critical messages that i see there are both from SCM and one reads "The Dell Digital Delivery Service service terminated unexpectedly.  It has done this 1 time(s)." and the other "The
    system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly." (which is expected).  And there is a warn level entry about some Bluetooth device not being
    able to enter power save mode.  That's it for system event logs.
    At this point I'm totally stuck trying to figure this one out, or even trying to figure out how to obtain information on where it gets stuck.  This is worse than having a BSOD as with BSOD at least there is some info on what's happening.  Here
    I don't even see where it gets stuck or what's preventing from booting successfully.
    Please help!!!

    Here is the link to the SrtTrail.txt file: 
    http://1drv.ms/1sh7rCy
    Again, let me clarify the situation as well as provide some additional information that I discovered since original post.  Per original post - I can boot into the system up and  until installer gets activated either by trying to uninstall or upgrade
    existing software or install new one.  At the time, the only way I could get the system to boot again was to let it fail boot twice and on the third attempt let it perform system restore from a restore point, and then it would boot again (with all the
    installed/updated/uninstall changes wiped out)
    Since then I discovered the following additional behavior points:
    I managed to get it to accept couple of software upgrades by using roughly the following steps: let it fail boot twice.  On the third attempt instead of choosing system restore I instead cancel or choose advanced options (depending on what it offers). 
    Typically it goes either through some system analysis or disk check for errors - wait and it doesn't find anything.  When presented with a menu of other recovery options (like changing UEFI, command prompt, etc), I simply choose to exit and continue loading
    windows.  At this point it sometimes (I'd say 1 out of 3 times) manages to boot successfully, retaining all the changes (i.e. retaining software updates and the like).  If it doesn't succeed booting, repeat until it does.  Using these steps
    I managed to update most of software so far, including windows update.  But each time it's a struggle to get it to boot again.
    Simply rebooting the system without any changes succeeds most of the time.  However, today I noticed that a plain reboot (without any installer/uninstaller/update or any other system/soft/config changes) doesn't always succeed, requiring the same process
    as in previous bullet point to get it to boot again.
    I also noticed an additional behavior - my keyboard an mouse have some buttons that are illuminated (on dell keyboard those are media buttons, and on the dell mouse it is mouse sensitivity indicator). I noticed that when windows boot up, the keyboard and
    mouse lights go out simultaneously.  If they come back about a second or two later (with one flicker in between), then system boots up fine (the moment they come back, the system displays the logon screen with the seatle space needle).  However,
    if they don't come back, then the boot will hang there for ever.  Is it possible that some driver sometimes succeeds to be loaded correctly, and sometimes fails to load causing Windows to perpetually wait for that driver to finish loading (which it never
    does)?  If that sounds like a possibility, how can I find out what is it that windows is doing when it starts to perpetually wait for whatever it is waiting for?  Tell me what logs would help to understand that and how to capture those!
    Also note that I run Avira Antivir antivirus (ever since I got this PC), and it doesn't flag anything suspicious on the system.  I also ran MalwareBytes scan which found no suspects, as well as GMER rootkit scanner (which as far as i can tell, also
    did not find anything suspicious).
    There is another oddity that is going on with the system - may or may not be related, so mentioning just in case it is - which is that I'm using Dropbox, and it keeps creating "My Videos" folder on the Desktop, even though it is way outside of my dropbox
    root.  Deleting the folder doesn't help as the moment I right-click on the Desktop, it re-appears.  It, oddly enough, also appears in C:\Users\{profile} folder right along side real "My Videos" folder.  Looking properties of both in explore
    shows in the property pages that one is located in C:\Users\{profile} and another in C:\Users\{profile}\Desktop (and again, yet both of those explore shows in C:\Users\{profile}).  Like I said, not sure if these are related (I suspect not, but who knows),
    so mentioning just in case.
    Note that I'm trying to fix it without going through refresh or reset since the first one would cause the pain to reinstall of all the software on the system (without any indication that this would solve the issue), and the later option would just completely
    wipe out everything off of the system, which is even more painful, and again would not guarantee solution (e.g. if it is a bad driver that would get reinstalled anyway after wipe. Yes, I technically do have backups, but those are more for drastic case if my
    harddrive crashes, and wouldn't want to rely on those to voluntarily wipe the system due to odd behaviors - too painful and time-consuming.  I'm looking for a solution to problem rather than just-start-from-the-beginning-because-it-is-easier approach.
    Thanks, let me know how to get the troubleshooting info to get to root cause.

  • CALENDAR HANGS AFTER DOWNLOADING YOSEMITE

    after I downloaded the yosemite, the calendar hangs. keep getting the beach ball

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • After installing the latest upgrade firefox just hangs when opening - was fine before. have tried deleting restore session but worse not better now

    after installing the latest upgrade firefox just hangs when opening - was fine before. have tried deleting restore session but worse not better now. no change with firewall.
    == This happened ==
    Every time Firefox opened
    == yesterday, after installing the upgrade ==
    == User Agent ==
    Opera/9.80 (Windows NT 5.1; U; en-GB) Presto/2.5.24 Version/10.54

    I'm using Mac OS 10.4.11 & even typing this message the characters appear so slowly that I could get a hammer and chisel and inscribe the words faster than the new Firefox runs. WTF?

  • Iphone 5s Hangs randomly after upgrading to IOS 8

    I am bit worried about IOS upgrade. I am using Iphone 5s since March 2014. Till date it was working fine. But when I upgraded my Iphone from IOS 7.1.2 to IOS 8 problem starts arriving.
    Symptoms :      1. The phone hangs randomly after upgrade.
                            2. After selecting any application , it disappear suddenly. I have to start the application again. This mostly happen when I select Setting icon
    This is very much embarrassing that I am using one of the best phone in the world and it hangs automatically when I need it most.
    The only resolution for hang phone is to reboot.
    I upgraded to latest IOS 8.0.2 but still no improvement. I am expecting Apple team to look into this issue and resolve it. Waiting for your response.

    I have 5 Iphone 5's and Ipad Air. All upgraded to ios8. Everyone locks! it is so locked you have to hold home button and power button serial times. It reboots and just shows apple. When you use Safari, or type a text message, they just get behind then lock up with half a screen or half the icons.
    All my kids hate their devices now. I know Apple will fix. It is scary as i have never seen iPhones actually lock up and un-usable. this should have been caught in Beta. Perhaps Apple should get some "Real" outside normal users to beta. The ones they are using are not catching this stuff. Code is complicated, Apple has the best minds, Just keep holding the Home button and power button. Eventually it will reboot. Then close all the open apps. and don't tilt the phone sideways.
    Also close all un-used webpages left open in safari. this seems to fix.
    As for the Bug about lagging while texting and half screen lock ups. that needs to be fixed ASAP.
    I know from building things, there is always a few hiccups. Yelling won't do anything, give Apple a chance to fix it. I love Apple, and will continue to purchase the items. The world economy is changing, suppliers are going green, thus you get cheap bendable parts too. Apple will find the middle ground and work the problem. Please all post they read these blogs.
    If Apple deletes your posts and denies these problems then email Tim Cook. He does listen. Give it a week then it will all be sorted out. If apple sold iPhone 6 pluses that bend, then i am sure they will offer a replacement. Apple does care, May seem arrogant but they always come through at the end.
    Hang in there, i always rush and put the update on the minute it comes out, over and over, then complain about the bugs. Better to wait a month. i am addicted to new and better and just click upgrade. My fault too. I know better after 37 years with apple.
    Kind Regards,
    B

  • Ipad hangs frequently after upgrade to os 4

    ipad hangs frequently after upgrade to os 4. any ideas?

    For Safari try clearing its cache : Settings > Safari > Clear Cache (and Clear History)
    For Safari and other apps try closing all 'open'/recently used apps completely and then see if they work ok after you re-open them : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Dictation problems after ios 8.2 upgrade

    I rely heavily upon dictation.   2 problems occur (at minimum) after ios 8.2 upgrade to iphone 6. .
    1. I wasnt going to add this dictation bug (feature ;-)) b/c couldnt reproduce the seemingly safari bug when got home, but as I was dictating my first sentence for defect here, it happens in this text box on any line. :-(.
        1. Problem is as soon as dictation types in word Or words, when I hit done, it erases what was just dictated!  Happens on even just ine word. (So having to manually type all of this n I stink at typing ie, time consuming).
        2. I can paste characters from noteoad into here...so must be dictation relateD...it seems.
    2.  In the calendar textbox, when I dictate a new event (doesnt happen in location textbox) and the last character before it fills up the end of textbox (just before the "x"), it automatically does "done" for me (the beep sounds), it stops dictating, but more annoying is it will no longer allow me to continue dictating in that new event's top textbox.  That means I HAVE to type n I stink at that. To reproduce I simply:
    1. press the microphone.
      2. Type in only numerics 1 thru 17....it will dictate to look like this:  123 456-789-1011 1213 1415 1617
      3. "Beep/dong" noise because it hits the end of characters alowed it seems n decides it is "Done".
      4.  press the microphone
       5. "Beep/dong" noise because it wont let you dictate any more of anything said.
    I Couldnt find the entry where google shows someone with what looks like same issue/bug/defect/feature # 2, so entering this.
    I Have warranty but cant figure out how to get phone support for iphone (only mac ...last year).
    I don't seem to have this problem using i notepad in phone when he gets to having to wrap. :-)
    I Have not trieddictation on my mac...yet.
    CAn someone help on these issues please? Thanks!

    Hey Markwoody,
    Wow! That definitely sounds frustrating, but good job so far isolating and troubleshooting the issue. We have a few more steps that we can try in an attempt to resolve this issue:
    First, it sounds like you have tried restarting your phone. Let’s try a reset instead:
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    https://support.apple.com/en-us/ht201559
    How to reset
    - You should reset your device as a last resort and only if you can't restart it.
    - To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    If the issue persists, we’ll want to restore your device to factory settings and test once more. You can backup your device, but be sure to restore it as new first for isolation purposes, as restoring a backup can sometimes restore the same issues that you were experiencing before.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    http://support.apple.com/en-us/HT201252
    Thanks,
    Matt M.

  • My photos are out of chronological order after the os 5 upgrade.   How can I get them back in order?

    My photos are out of chronological order after the os 5 upgrade.   How can I get them back in order?
    If its not possible, how do I go back to the old  os?

    I had tried that several times with no luck.  Late last night I was finally able to get through  to the Verizon technical support who then called in Apple technical support.  It took 1 1/2 hours for them to figure it out and guide me through a fix.  So here's the deal .......... I use Yahoo mail and had left the "contacts" button in the on position.  Apparently Yahoo likes to go into your contacts and gather information and can leave it in shambles.  My advice is, go to settings, then mail, contacts, calendars.  Select any and all of your email accounts and go in and turn off their access to your information.  Leave it on for Icloud but none of the others.

  • KDE/calendar display changed after last upgarde.

    Hi,
    I'm on a fully update Arch_64/KDE.
    After the last system upgrade, the calendar hour display (part of Kontact) changed from the usual HH:MM (e.g., 11:00) to 11'.
    I could find where to restore tp the former format.
    Please advise1
    thanks

    If this is your only problem with the new KDE-PIM stuff you're lucky But have you tried changing the format under settings -> "Regional & Language"?
    matse

  • How to recover Contacts after MobileMe to iCloud upgrade?

    How to recover Contacts after MobileMe to iCloud upgrade?

    I assume that the regular backups of the contacts and calendar only work on a Mac
    No, you can backup contacts and calendars on a Windows PC. There are many backup options for PCs, but you would've had to set one up. Don't you backup any of the data on your PC?
    Your recommendation is that I restroe my entire iPhone from the last iTunes backup to recover these files?
    That's really your only option with no other backups available. See: http://support.apple.com/kb/ht4946
    There's no guarantee that the iTunes Backup will include all your contacts, as noted in the support article above, you're supposed to maintain backups of the contacts in the contact manager you sync with.

  • Iphone 4s hangs during final step of ios7 upgrade

    I am upgrading a 4s to iOS7 using the sync cable and Windows.  The upgrade process seemed to go fine but now (in what I assume is the last step) the phone seems to be frozen.  The apple logo is on the screen and a progress bar is below it.  The bar appears to be at or close to 100% complete but it has sat like this for over an hour.  The phone is not showing up in iTunes and is still plugged in with the sync cable. 
    What should I do?  unplug?  power off?  I'm scared to do so because I don't want to brick the phone since it is apparently still in the upgrade phase...

    I had the same problem except my progress bar was stuck at 50%. After waiting 10 hours for completion, I assumed my iPhone was bricked. However, I plugged into my PC and started iTunes (which required an update to iTunes 11.1) then plugged in my phone. iTunes could see my phone and read its OS and IOS7. Since I figured I had nothing to lose, I reset the iPhone by pressing the power and home buttons simultaneously and holding them down until the iPhone reset. When it booted back up it was okay and running the new install of IOS 7. Don't know why it hangs at the end of the upgrade. Hopefully your's will be okay after a reset.

  • I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

    Hi
    I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
    I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
    Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
    Would you please help me out? I would really appreciate it.

    Hi..
    Restart your router then restart the iPhone to test.
    If that doesn't help, try this support article >   iOS: Troubleshooting Wi-Fi networks and connections

  • Ipad 4 retina display is slow after iOS 8, also upgrade the the iOS 8.0.1 i think and safari is slow, animations are slow, and i can't restore it to iOS 7, there it was great.

    ipad 4 retina display is slow after iOS 8, also upgrade to iOS 8.0.1 i think and safari is slow, animations are slow, and i can't restore it to iOS 7, there it was great. i mean its like my iphone 4 with iOS 7 in its best days. i hope no to get stuck again, i mean please let me go to the iOS 7)).

    Upgraded my ipad4 from ios6 to iOS 8 because the new WSJ app required it. HUGE MISTAKE!!!!!!! I can maybe understand some apps being slower but not Safari or Chrome. Apple must be throttling back the ipad4 processor even more with ios8 to force an upgrade to the next gen iPad whenever it arrives.

  • Follow up activities after SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4

    Dear Friends
    We have completed SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4.
    We refereed the upgrade guide for follow activities and we required confirmation before performing the activities.
    Could you please help us what needs to be done immediately after upgrade.
    Regards,
    Bharathi

    Dear Nils,
    Thanks for the support.
    Yes, we are following the same document 'CUUC46C_to_NW701SP07' for unicode conversion after the upgrade from the note 928729.
    Please suggest us in that document which are the steps should be carried out after ECC6.0 EHP4 upgrade,
    1. Preparation
    2. Unicode Preconversion Phase in SAP Basis 4.6C
    3. Upgrade Process
    4. Unicode Conversion Phase
    5.  Unicode Conversion Completion Phase
    6. SAP Notes
    Regards,
    Bharathi

  • HT5622 My ipad hangs up after showing a message that says it "Cannot Access Find My Friends" and that I need to open the app and review my signin info to continue sharing. I can't go there because it is hung up. I also can't power off.

    My ipad hangs up after showing a message that says it "Cannot Access Find My Friends" and that I need to open the app and review my signin info to continue sharing. I can't go there because it is hung up. I also can't power off.

    Perform a Reset...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

Maybe you are looking for

  • Issues with 10.3.1.1779 on Q10

    I just got this patch a few weeks back because my carrier is extremely slow I guess. I noticed mostly negative differences after this update, which usually isn't the case. The UI itself is a lot clunkier and slower to navigate I find, and especially

  • Save As = spinning beach ball = freeze = what the!

    Short Story: in various applications, at various times, the program stops responding and Force Quit does not work. Usually this occurs when using the SAVE AS function. Long Story. I have an eMac G4 that was running 10.3.8. it was networked at home vi

  • Fragmented albums after updating to latest version.

    have downloaded latest version of itunes and now a lot of my albums have been split into seperate songs in the playlists. is there a fix for this or have i got to spend hours changing the get info section,.these albums were all fine on previous versi

  • Condition record table

    Hi I want to make a report of all the cust-material price with validty which are stored in VK12.How can i do it.Is there a particular Tcode or table name where i can get all the price with cust ,material and vality period of condition type.. Thankyou

  • Installing All (9iDB,9iDS and report server) in same machine

    I want to use one machine only. I have installed 9i database, and on same 9iDS. and created a report server on same machine i am facing a problem all application runs very fine but on running report from forms by using webs.show_document() a new page