Calendar Integration with Portal Server 6.0

Hi,
I have installed Calender Server 5.1.1 with portal server6.0..When click the Launch Calendar channel link in my portal page,it takes me to login page for Calendar Server on.I expected it to take me to the calendar page .I donot want to re-authenticate every time i launch a calendar.Any ideas??
Thanks,
Ramnath

Quickest path to success...
stop the cal server
cd to Install Path/cal/bin/config
edit ics.conf
change "service.htttp.ipsecurity" from yes to no
save you changes
restart the server
hope this helps

Similar Messages

!!! Integration UWC Webmail with Portal Server

Hello There...
How can I integrate UWC Webmail with Portal Server. I"m using SJS Portal Server 6 2005Q1. I've configured a CHANNEL extending a IFRAME provider in order to open the webmail in the same window. But when I click on the "UWC Webmail" tab the Portal Server gets the user credentials and starts loading the webmail and stops without any error. If I open another window or tab it works proving the authentication process works fine.
Thanks in advance...
Jeff!

Hi Jeff,
Have you tried using the UWC channels that the portal ships out of the box?
Portal Server 6 2005Q1 ships with a channel - UWCMail. Add this channel to your desktop, and provide the Messaging server details and user credentials in the channel edit screen. This channel will display a list of emails and also provide links to open the UWC webmail.
Look at the "To Configure New Communications Express Channels" section of this guide - http://docs.sun.com/source/819-2201/index.html. The communications products (Messaging, Calendar, UWC) will have to configured as explained in this guide for the single signon to work.
Butwhen I click on the "UWC Webmail" tab the Portal Server gets the user credentials and starts loading the webmail and stops without any error.I'm not clear what you mean by this, so can't comment. A little more detail will help.

AD RMS 2012 integration with exchange server 2013

AD RMS 2012 integration with exchange server 2013
I would like to have a knowledge About this Topic
1.what is differrent if we use internal SSL certificate with Public Certificate and in this case i would like to use Mobile Phone I eed to import Root Certificate ?
2.Do I have problem? If I start to install AD RMS 2012 with SQL EXpress after that I want to chage it to SQL Server ?
3.when I use SQL Expres what I can do after Disk is full (10 GB)?
4.If AD RMS is down It will affect with email that it is already sent ?
5. Which Edition of outlook can produce IRM protected documents
6. To Use AD RMS Server 2012 through OWA, Outlook and Moblie Phone ,a CAL is required or not ?

Could you post the list of sites:
appcmd list site
The ones listening on port 80:
appcmd list site /bindings:http/*:80:
And on port 443:
appcmd list site /bindings:https/*:443:
Step by Step Screencasts and Video Tutorials

Project systems integration with portal (EP)

Dear all,
I have to integrate the projects systems module with Portal.(EP)
In portal transactional I views can be used to create projects which can be store in the R/3.
Now the issue is to create projects with out using Transactional I views. This should be a simple entry through portal, where in the user keys in the key fields and there by the project is created and scheduled.
For this I have tried with using business packages given by SAP to integrate with portal.
Now the issue is I can display the projects that are created in R/3 through portal and display the necessary fileds required for viewing (I views). Now the main problem is to create the project using these business packages so that the same get updated in the R/3.
But business packages do not have the option of creating the project. I am using the business packages for projects 50.3.1
Has any body come across this type of issue which has to be integrated with portal and subsequent creation of projects through portal
If any body has done this in any other way please kindly share on this.
Experts please throw some pointers on this.
Regards.
Vara Prasad

Hi Aman,
You may try creating transaction iViews of the desired PS Transaction.
For more help you can take help of your Portal Administrator.
Else, see if this link may help:
http://help.sap.com/Business_Packages/EN/06/3ED93BE53BCD29E10000000A114084/frameset.htm
Regards,
Vivek Pandey

How to use PPM 5 (standalone or integrated with portal)

Hi,
I would like to know which advantages and disadvantages are presented by using PPM 5.0 standalone or integrated with portal? all functionality are the same in both cases? which is the best option?
Thanks a lot,
CAMILO URIBE

Hi,
from a functionality point of view, standalone and portal usage of SAP Portfolio and Project Management 5.0 are the same (except functionality which is in general only available within a portal, e.g. KM documents, collaboration rooms, etc.).
From a TCO perspective, for the standalone usage you'll only need the ABAP stack (except for ADS), i.e. if you don't anyway already have a portal in use in your company, this could lead to a lower TCO.
Kind regards,
Florian

Using log4j with portal server

Hi,
I am trying to use log4j with Portal server 6.1 using log taglibs from jakarta.
Here is what i've done:
1. copy taglibs-log.jar in /etc/opt/SUNWps/desktop/classes
2. copy taglibs-log.tld in /etc/opt/SUNWps/desktop/default/tld
3. put log statements in JSPs
for example:
<log:debug>This is body content.</log:debug>
<log:debug message="This is attribute content." />
4. /etc/opt/SUNWps/desktop/classes/log4j.properties contains
=========================================
# Sample properties to initialise log4j
log4j.rootCategory=debug, stdout, R
#log4j.rootCategory=debug, stdout
log4j.appender.stdout=org.apache.log4j.ConsoleAppender
log4j.appender.stdout.layout=org.apache.log4j.PatternLayout
# Pattern to output the caller's file name and line number.
log4j.appender.stdout.layout.ConversionPattern=%5p [%t] (%F:%L) - %m%n
log4j.appender.R=org.apache.log4j.RollingFileAppender
log4j.appender.R.File=logtags.log
log4j.appender.R.MaxFileSize=100KB
# Keep one backup file
log4j.appender.R.MaxBackupIndex=2
log4j.appender.R.layout=org.apache.log4j.PatternLayout
log4j.appender.R.layout.ConversionPattern=%p %t %c - %m%n
===============================================
However no log file is created on my system. I am very new to this and would appreciate if anyone could tell me what more needs to be done to get log records in a file.
Thanks for all your help.
Kind regards,
Apoorv

Hi,
I am trying to use log4j with Portal server 6.1 using
log taglibs from jakarta.
Here is what i've done:
1. copy taglibs-log.jar in
/etc/opt/SUNWps/desktop/classes
2. copy taglibs-log.tld in
/etc/opt/SUNWps/desktop/default/tld
3. put log statements in JSPs
for example:
<log:debug>This is body content.</log:debug>
<log:debug message="This is attribute content." />
4. /etc/opt/SUNWps/desktop/classes/log4j.properties
contains
=========================================
# Sample properties to initialise log4j
log4j.rootCategory=debug, stdout, R
#log4j.rootCategory=debug, stdout
log4j.appender.stdout=org.apache.log4j.ConsoleAppender
log4j.appender.stdout.layout=org.apache.log4j.PatternL
ayout
# Pattern to output the caller's file name and line
number.
log4j.appender.stdout.layout.ConversionPattern=%5p
[%t] (%F:%L) - %m%n
log4j.appender.R=org.apache.log4j.RollingFileAppender
log4j.appender.R.File=logtags.log
log4j.appender.R.MaxFileSize=100KB
# Keep one backup file
log4j.appender.R.MaxBackupIndex=2
log4j.appender.R.layout=org.apache.log4j.PatternLayout
log4j.appender.R.layout.ConversionPattern=%p %t %c -
%m%n
===============================================
However no log file is created on my system. I am
very new to this and would appreciate if anyone could
tell me what more needs to be done to get log records
in a file.
Thanks for all your help.
Kind regards,
Apoorv

Language determination when WDA application is integrated with Portal

Hi,
How does the language determination work when WDA application is integrated with Portal?
Thanks.
Chitrali

Hi,
Please check out this link -
http://help.sap.com/saphelp_nw04s/helpdata/en/7b/fb57412df8091de10000000a155106/content.htm
Regards,
Lekha.

Reg: BI integration with Portal

Hi
I am new to SAP BI and have a requirement to integrate SAP BI with Portal.
Any help in the form of documents or url will be of great help.
--> Integration of BI with Portal
--> Best practices for integration.
--> What re the problems while integrating..
Merely anything related to integration with portal will be of great help
Thanks in Advance
Cheers

Hi,
Please check the links below
Check this URL for Step by step procedure:
http://help.sap.com/saphelp_nw04/helpdata/en/a5/359840dfa5a160e10000000a1550b0/content.htm
Integration of BW Components into the Portal
http://help.sap.com/saphelp_nw04/helpdata/en/a8/37e1082163c54abce581a54d6b771a/frameset.htm
Configuration for the Integration of SAP BW and SAP EP
http://help.sap.com/saphelp_nw04/helpdata/en/2f/741a403233dd5fe10000000a155106/frameset.htm
How to Integrate BW Web Applications into EP 5.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/af073962-0b01-0010-f7a4-f4c1023ed0a4
Keys for Integrating SAP BW 3.5 and SAP Enterprise Portal 6.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6b1472a7-0301-0010-64bd-dc96509db6f7
Enterprise Portal Integration into BW(e-class)
https://media.sdn.sap.com/eclasses/ebw201/main.htm
Regards,
®

BI integration with Portal - What & How

Hello dear Gurus,
I am very new to SAP BI Frontend and needed some help with workbook queries integration with portal.
Let me explain you what i seek:
1) What of SAP BI Frontend can be included in Portal (workbook, WAD,BEx analyzer or designer, AD-hoc)
2) Do we have to create an Iview or does the EP guy creates one. Do i have to create seperate Iviews for seperate reports.
3) If its a workbook that i need to weave in an IVIEW on the Portal , can someone provide me a step by step article, blog or forum.
Any other information i may need -but i need it in detail.
I wasnt able to find anything concrete all day yesterday and I write todayw ith reluctance. So please bear with me and point/lead me in the right direction.
Points shall be assigned.
Thanks,
Zain

Hi there everyone,
I would really like some step by step detailed information. Please help me out all the gurus out there.
thanks

Integrating WebSphere Portal Server with Sun Java System Access Manager

Hi All,
Is it possible to Integrate WebSphere Portal Server with Sun java System Access Manager?. If so plz send me any doc or web site link for the same.
Thanks in Advance
Rgds,
Lessly J

Rushi-Reliance wrote:
Kindly let us know how to proceed further as we are waiiting some reply from your team.As I already advised in your previous posting (http://forums.sun.com/thread.jspa?threadID=5359095), you are best off re-installing solaris from scratch and installing Communication Suite 6 update 1 if you cannot get Access Manager 7.1 configured.
Regards
Shane.

Portal integration with Exchange server 2003 issues.

Hello,
We are using NW04s EP 7.0 SP16 and Exchange server 2003. We are trying to perform OWA and Groupware integration. Both the servers are in the same domain.
I have followed all the steps in the notes and documents available there in SDN. There are few issues:
1) The latest KerbMap filter has been configured in Exchange backend server. SAP note 785343 says that the exchange frontend server needs to be configured for anonymous authentication to enable pass-through authentication. But doing this breaks the form based authentication in exchange server, and it also poses security risk when the backend exchange server is behind the firewall. How do we enable pass-through authentication so that the exchange frontend passes the mysapsso2 cookie to the exchange backend server?
2) When I try to create an appointment or try to view the appointments, it gives an error message saying " No logon data found for system Exchange". The Exchange system has been configured for SAP Logon Ticket, and the user mapping fields were left empty. Why should it prompt for user mapping when the logon method is "SAP Logon Ticket"?
There are many documents out there, but none is the latest with clear steps. Can anyone point me in the right direction please?
Thanks,
~Yasin

As far as I remember, when Exchange 2003 is installed on a Domain Controller, it uses the local DC as a GC. You need to set back the 2003 DC as GC and restart it.
I believe, you are aware that demoting/promoting a DC with Exchange server on it is not supported by MS. The best approach is to:
Introduce an Exchange 2010 member server
Move all resources from Exchange 2003 to Exchange 2010
Decommission Exchange 2003
Demote the 2003 DC
Step by Step Screencasts and Video Tutorials

WLC not integrating with Radius Server

Hello world,
I have the following situation:
One WLC 2000 Series (software version 7.0.230.0) with multiple SSID`s, one is with 802.1x integrated with a Radius Server.
Everything worked fine until fiew days ago, when users were unable to logon via they`re certificates on Windows XP.
The infrastracture didn`t suffer modifications.
What i have checked: Radius certification isn`t expired, client certification isn`t expired, the password between controller and Radius is correct.
There are no ACL`s between the WLC and the remote Server. I can ping the devices, other SSIDs on the same controller (wpa/psk) are working correct.
The AP`s are 1242.
I have tried deleting the SSID, configure it back. The OS on Windows Server is 2003 Standard. The AP`s are configured H-Reap.
I have increased the Server Timeout from Radius Authentication Servers from 2 to 30 sec.
The message logs recived on WLC Trap Logs:
RADIUS server X.X.X.X:1812 failed to respond to request (ID 161) for client xx.xx.xx.xx.xx.xx/ user 'unknown'
The message from the debug dot1x aaa enable:
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_CALLING_STATION_ID(31) index=1
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_CALLED_STATION_ID(30) index=2
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_NAS_PORT(5) index=3
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_INT_CISCO_AUDIT_SESSION_ID(7) index=4
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_NAS_IP_ADDRESS(4) index=5
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_NAS_IDENTIFIER(32) index=6
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_VAP_ID(1) index=7
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_SERVICE_TYPE(6) index=8
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_FRAMED_MTU(12) index=9
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_NAS_PORT_TYPE(61) index=10
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_EAP_MESSAGE(79) index=11
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_RAD_STATE(24) index=12
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_MESS_AUTH(80) index=13
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df AAA EAP Packet created request = 0x1cff348c.. !!!!
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Sending EAP Attribute (code=2, length=6, id=10) for mobile xx.xx.xx.xx.xx.xx.
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00000000: 02 0a 00 06 0d 00 ......
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df [BE-req] Sending auth request to 'RADIUS' (proto 0x140001)
*radiusTransportThread: Mar 06 09:37:07.328: 00:15:e9:33:75:df [BE-resp] AAA response 'Interim Response'
*radiusTransportThread: Mar 06 09:37:07.328: 00:15:e9:33:75:df [BE-resp] Returning AAA response
*radiusTransportThread: Mar 06 09:37:07.328: 00:15:e9:33:75:df AAA Message 'Interim Response' received for mobile xx.xx.xx.xx.xx.xx.
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.329: 00:15:e9:33:75:df Skipping AVP (0/27) for mobile xx.xx.xx.xx.xx.xx.
The messages on Windows 2003 Standard:
User Y was denied access.
Fully-Qualified-User-Name = xx.domain.com/Users_T/user
NAS-IP-Address = X.X>X.X
NAS-Identifier = Cisco_
Called-Station-Identifier = ---------------------
Calling-Station-Identifier = ---------------------
Client-Friendly-Name = ---------------------
Client-IP-Address = ---------------------
NAS-Port-Type = Wireless - IEEE 802.11
NAS-Port = 1
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server = <undetermined>
Policy-Name = Wireless Policy
Authentication-Type = EAP
EAP-Type = Smart Card or other certificate
Reason-Code = 262
Reason = The supplied message is incomplete. The signature was not verified.User Y was denied access.
Fully-Qualified-User-Name = xx.domain.com/Users_T/user
NAS-IP-Address = X.X>X.X
NAS-Identifier = Cisco_
Called-Station-Identifier = ---------------------
Calling-Station-Identifier = ---------------------
Client-Friendly-Name = ---------------------
Client-IP-Address = ---------------------
NAS-Port-Type = Wireless - IEEE 802.11
NAS-Port = 1
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server = <undetermined>
Policy-Name = Wireless Policy
Authentication-Type = EAP
EAP-Type = Smart Card or other certificate
Reason-Code = 262
Reason = The supplied message is incomplete. The signature was not verified.
Can anyone help why i cannot log the users via 802.1x ?

Okay that is good..... this is what I would do next. I would create a test ssid that uses PEAP MSchapv2 and create a new policy in IAS that is basic. Allow 802.1x wireless and user group only and see if you can reconfigure one of the XP machines for PEAP. Can you also post a screen shot of your polices (connection and network) so we can review it.

Webdynpro ABAP application integration with portal

Hi,
      Can someone provide me the complete documentation for
       1. webdynpro ABAP application development and
       2. webdynpro ABAP application integration with enterprise portal.
Thanks...
Kundan

hi Kundan ,
design pattern or paradigm followed by Webdynpro ABAP is
MVC concept
           M-Model
           V- View
            C-Controller
and cms with the advantages like Structuring the programming
     Creation of easily manageable application blocks
     Reusability of whole components
for more documentation about WD ABAP , refer
http://help.sap.com/saphelp_nw2004s/helpdata/en/7c/3545415ea6f523e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/nw-ui?rid=/webcontent/uuid/fed073e5-0901-0010-4eb4-c9882aac7b11 [original link is broken]
SAP netweaver provides the integrationof ESA , for integartion netweaver provides us wid the People Integartion
refer
http://help.sap.com/saphelp_nw70/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
as well
I hope it helps
rgds,
amit

Siebel integration with Portal

Hi
Can anybody tell me how the Siebel integration can be done with Portal.
Pl send me steps.
thx
PRadeep

Pradeep,
You might want to check this weblog.
Adapters to Integrate SAP XI and Siebel system
James

SAP Erec System Integration with Portal

We have installed a new erec system in Sap nw 7.02 abap system which has to be integrated with Existing portal system. There is another existing HR system(ecc6.0 ehp ) which is already connected to portal. What are the steps to be followed for Integrating Erec system with portal.
Thanks.

Dear Colleagues,
We have similar situation and this week we hopefully will approach to integrate ERECRUIT with SAP Portal. We have recommendations from consultants but since ERECRUIT implementation is still no commodity’s I’d like to confront this recommendations and share experiences. Please have a look on the the thread about it:
ERECRUIT 606 integration with SAP Portal 7.31 - what to take in mind?
Cheers
Waldek

Calendar Integration with Portal Server 6.0

Similar Messages

Maybe you are looking for