Calendar is creating an extra event when the event spans the week view end of week to beginning of next week.

When I create an event in Calendar that goes from Saturday to Sunday, like my work shift that starts at 5:30 pm and ends at 3:30 am the next day, the event gets duplicated onto the next day but is seen as a single event. So if I delete the one on Sunday it deletes the Saturday one as well. But visually there are two separate events. This happens when spanning work weeks. I first noticed it because my week view was set to start on Sundays. All of my Saturday shifts were duplicated onto the Sunday. It seemed to be okay only when I switched the week to start on Mondays. But then I just went to create an extra shift I picked up on Sunday and now it's there on Monday as well.

Ive reset, restored and this is the second phone. Thought it maybe a wonky screen that would shift it while setting dates. THe only thing I can think of is that I am syncing with google calendar, but it only happens when setting events in ios not if i do it from google website on desktop PC.

Similar Messages

My firefox won't create a new tab when I click on the tab. It will create a new window. It worked fine till this morning. I've rebooted several time to see if that would make a difference. It doesn't.

I can only create tabs by clicking on a link in an email or a program or a link in the window I am viewing. It will NOT create a new tab when I click on the tab to create a new tab, nor will it create a new tab when I right click on the tab & click on create a new tab. I'm used to using tabbed browsing all the time & it's driving me nuts. HELP!
I have not downloaded any new updates on any software or downloaded any new software in the hours before this started happening.
Just to clarify about my original question. I meant to say that firefox will create a new window when I right click & click on create a new window but will not create a new tab when I click on create a new tab. I think what I wrote may have been somewhat confusing.

Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

My friend gave me ipod touch with all his accounts, i created new accounts but when i went on the appstore and tried to update apps installed by him,i was asked his account's password! i dont know his password.how can i use my account to update apps?

my friend gave me ipod touch with all his accounts, i created new accounts but when i went on the appstore and tried to update apps installed by him,i was asked his account's password! i dont know his password.how can i use my account to update apps?

You can't. Apps and really all content purchased/downloaded through one Apple ID is forever tied to that Apple ID. In the case of Apps they will always request that Apple ID to update as they are licensed to that Apple ID.
In reality, the Apps were licensed to that Apple ID by the developer. And cannot simply be given away to you for you to use.
He should have wiped the iPod clean so you could set it up for your use without any of his accounts or purchased content as you are not really licensed to any of those Apps.
Your friend should have followed this support document before giving the iPod to you:
What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support

How do i split events when Split Events Before Selected Clips is not even highlighted

iMovie question - how do i split events when Split Events Before Selected Clips is not even highlighted? I just puchased this new iMac yesterday and i am still trying to figure things out!

You should start by having a read of the online manuals and correct forums.
This forum is for iOS (iPads and iPhones).
There are plenty of great resources on the Apple website,
but try to search for iMovie Mac.

IOS 5 iPhone duplicating some calendar events when iCal events on iMac have no duplicates

I've searched in vain on these forums but can't find a problem quite like mine. I am running
- iPhone 4 with iOS 5.0.1
- iMac with Lion OS X 10.7.2
I was using iCloud for all my calendars but found that my phone battery was draining very quickly, so decided to go back to using the iMac to sync to all devices. I exported all my calendars (seven of them) from iCloud through iCal/File/Export/Export, and then imported them as new calendars. I deleted my iCloud account on my phone and iCal. I then synced from iMac to iPhone and all went perfectly, except for my primary calendar (typical...).
All events for all calendars appear perfectly in iCal on the iMac. But my primary calendar, on my iPhone only, has duplicated nearly all the events in it. There doesn't seem to be any pattern to those events that AREN'T duplicated - some are annual, all-day recurrences, some are one-offs.
I've tried deleting the cache and the plist from the iMac library (even though, yes, the iMac iCal appears to be working perfectly), then resetting the iPhone, and resyncing - using the 'replace information on this iPhone' option for Calendars. No luck. I've tried re-exporting the calendar from iCloud, then re-importing, then resyncing to the iPhone. Each time it duplicates on the iPhone, but not on the iMac.
Weird - and this is driving me mental.
I'm guessing the calendar might be corrupted or something - is there an equivalent plist or something that I can try deleting from the iPhone? This has gotten beyond my skills!
Pleeeeaaaassssee heeeelp!

Update:
I ended up going through the duplicate entries on the iPhone and manually deleting the second entry in each instance. I re-synced to iMac, and the duplicate entries stayed deleted, and nothing appears changed on the iMac calendars.
I then synced iPhone 3GS and iPad 2 to iMac, doing the same process with the calendars. I noticed that I had missed one duplicated entry on my iPhone originally, and that this had transferred to each of the other machines too (ie they all had two identical entries for the same thing) (but not on the iMac, still). Deleted the second of the duplicates again on the iPhone, synced everything, and it was gone from all.
So all in all, not a brilliant fix, but a successful one nonetheless - although it remains to be seen whether the duplicates will reappear at some point, as I've noticed other users have had that problem in some circumstances. I'd love to hear if anyone has any brilliant thoughts regarding this, though.

How do I create a email notification when a user hits the submit?

I have created a form that inserts a record in the
database using ASP. Now I would like to be notified when some
one fills out the form and submits it.

Forms to Go from Bebosoft (script generating software)
http://www.bebosoft.com/products/formstogo/overview/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Iphoto deletes events when adding events from flagged photos

Dear community,
Whenever I use flagged photos, previous events get deleted. I don't know whether this is because the photos can only be in one event at a time, or that this is erroneous behaviour.
In my logic, there should be possibility for as much events as you deem possible, yet it is mind boggling, that you don't have an automatic option, that makes you put photos in two events. Also it is mind numbing that you can't just copy & paste the pictures anywhere you like. You can paste in albums, but not into events.
You have an option to "Create event from flagged photos", yet not an option to add photos to an existing event, you must flag them first.
Then there is the sudden discomfort of brain pain, when you find out the previous events you've created stopped seizing to exist, and you have to sift through 500 photos, just to find 3 photos you've flagged in the creation of a previous event. Which defeats the purpose of creating them.
The albums work good for this purpose, yet I want to be able to pin albums to the back board, where the events are. Or have events that will not disappear, may contain doubles with other events, or/and aren't restricted to copying into them. It would save a lot of time, to just CMD + C, CMD + V.

You're confusing Events and Albums.
In my logic, there should be possibility for as much events as you deem possible, yet it is mind boggling, that you don't have an automatic option, that makes you put photos in two events
A photo in two Events is using twice the disk space. An album just references the photo in the Library and can be in as many albums as you like while wasting no disk space.
You have an option to "Create event from flagged photos", yet not an option to add photos to an existing event, you must flag them first.
Eh, you have to flag photos first before you can create an Event from them too...
Then there is the sudden discomfort of brain pain, when you find out the previous events you've created stopped seizing to exist, and you have to sift through 500 photos, just to find 3 photos you've flagged in the creation of a previous event. Which defeats the purpose of creating them.
Flagging photos does not delete Events. Emptying an Event deletes them.
You can't have what you want.

When will Apple resolve the FCPX Crashes when Effects are added to a clip in timeline.

I have tried every route to get answers from Apple regarding system crashes when applying an Effect to a clip in the timeline. I am now getting more aware from posts in all sorts of Forum / Communities that this is causing VERY MANY users a problem.
It would only take 30 seconds for Apple to post a statement to let their users know what they intend or are doing to resolve together with an estimated fix time.
Come on Apple please SAY something at least.
F. Jackson

Here we go - I have another thread that I started the other day, but thought I'd continue this here. I just did an extensive test. Fred, you may be on to something here. I'm beginning to think some of this is only happening if you are:
(a) running the Trial version
(b) Motion is NOT installed
(c) and it may be that the 10.0.1 update has created this problem, although surely Tom and Andy are running that update...
...or some combination of the above. Anyway...
New iMac i5 quad-core 12mb RAM - new machine with total stock config - only Apple software except for Office 2011.
FCP X Trial version, Motion is not installed
I've tried a variety of clips, but to eliminate variables, for this test I just used clips from a Canon 60D. They were imported from the card and converted to ProRes by FCP X.
Again, these crashes only relate to using the Inspector with certain Effects. If the Inspector is closed, I can apply these Effects and they play back flawlessly. However, once I've applied them and selected the clip, clicking the Inspector button causes an immediate Quit of FCP. And, if the Inspector is already open, just applying the Effect to any clip causes an immediate Quit.
These are the Effects that cause the crash (for me) by category:
Blur - Radial, Zoom
Distortion - Earthquake, Fisheye, Fun House, Glass Block, Mirror, Scrape, Water Pane
Keying - Image Mask
Lighting - Highlights, Side Lights, Spot
Looks - amazingly enough, all work except for Glory
Stylize - Censor, Halftone, Line Screen, Photo Recall, Pixellate, Vignette
Tiling - Kaleidoscope, Kaleidotile, Perspective Tile (but strangely just plain "Tile" DOES work)
So, this is approximately half of the supplied Effects. Interestingly, there is not a single category in which ALL of them work, nor one in which NONE of them work. And, by the way, doing this gave me a chance to check out every Effect - wow are there some cool ones I can't wait to work with. And, I got into this routine of highlight clip, make sure Inspector was open, double-click Effect, if no crash just CMD-z and repeat. I threw a lot of changes at it in quick succession and it handled it beautifully, except for the list above.
There is also a third party free effect from Alex4D called Smooth Move. It looks fantastic! It allows Ken Burns-like scaling which somewhat alleviates the weird animation that results if you scale and move at the same time with keyframes, BUT it allows the flexibility to NOT have the move span the entire clip like Ken Burns does. Oops, sorry, that Effect ALSO crashes the Inspector, so I can't access the controls. And, to keep this test pristine, I didn't try the Alex4D Effect on this test iMac, just on my Mac Pro on a clean system install.
Now, if Apple said (or says later) oh, wait, in the Trial version some of the Effects are not adjustable, but they are flawless in the paid version, I'd be fine with that. And, if you guys with the paid version and/or Motion installed say it works fine for you, I believe you :-). It's just that several of us were excited to get the Trial. I've been using FCP since 2003 and LOVE this new version. But, until you figure out that you can't use the Inspector with half of the Effects if you are using the Trial version, it just seems like the thing is unusable and crashes constantly - because it does.
Now that I know this, I don't think I've had a SINGLE crash otherwise - even on my "wrong" install on my MacPro with FCP7 and FCPX both on the boot drive.
David

Events when a concurrent complete

Hi,
Is there an event when a concurrent complete the execution?
If not is there some way rather than polling the fnd_concurrent_requests table?
Thanks
Mike

Hi,
I believe there is no event fired. However, this can be achieved by following the steps in the following documents.
Note: 396756.1 - How to send a Concurrent Program Error Exception Report as a notification to users using Alerts
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=396756.1
Note: 164085.1 - Enhancing Oracle Applications Concurrent Processing
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=164085.1
Regards,
Hussein

Why is the Discussion on the Moto X Update Locked?????

Here is the thread I am referring to:
https://community.verizonwireless.com/thread/806362
Below is the message I was trying to send to the community leaders and VZW customer support reps who commented on this thread, but I'm not being followed by these people I can't directly message them. Therefore, I have no choice but to create this discussion.
When will we get the Moto X OTA update?
I was about to post an update to show that Verizon/Motorola is actually making progress on this update because they are sending out soak tests. I'm sure this would make people who are following this thread happy, and really it's something that Verizon should have done.
This is even bad for Verizon's image, because now it looks like there has been no progress- we're simply left with the last comment: "It's obvious VZW just doesn't care." At least that comment was accurate.
This is not only a bad decision for VZW's own sake, but it's also horrible customer service. You don't close a help ticket on a customer before the issue is resolved!!! Same thing with a community thread. What's the point of even having this community forum if people can't get updates on the topics when they're available???
References to moderation removed as required by the Terms of Service.
Message was edited by: Admin Moderator

I know, there are days I swear I don't know they even have these forums. The censorship is almost based on the mood of the Verizon dude.
I bet the above line got removed..(LOL)

Is it the code or the browser

i don't use this application often, but it has worked previously within the last month. However now my cffile is ALWAYS translating mime type to "application/x-itunes-itlp" even though it is sometimes a pdf, sometimes a word doc, sometimes an excel file etc.
My <form> tag has enctype="multipart/form-data"
The error is being thrown on the following line of code:
<cffile action="upload" fileField="docUpload" destination="#dirPath#" nameConflict="overwrite" result="fileUpload" accept="application/vnd.ms-word, application/msword, application/vnd.ms-powerpoint, text/plain, application/x-pdf, application/pdf, application/vnd.wordperfect, application/vnd.ms-excel, application/zip, application/x-zip, application/x-zip-compressed, application/octet-stream, application/x-compress, application/x-compressed, multipart/x-zip">
and the error, no matter what file so far (except text files) is:
The MIME type of the uploaded file application/x-itunes-itlp was not accepted by the server.
My question: who decides what mime type a file has? is it the browser or the cffile tag? If it's the browser, which i'm starting to suspect, is it something i can change in my own browser? (I have both firefox 3.5.7 and IE 6) if it's the cffile tag, can i change how it behaves?

OK. So i never found a good solution, although Adam's suggestions help find the problem, the solution may not be within my means, what i did find out was that every file uploaded from this machine (and this machine only) to any server running my code is being identified at some point as an itunes/ipl file. I'll be glad to find out where the problem was as i checked this computer's registry and it appeared to be correct, but didn't know how to see whether it was the browser or the server after that.
I removed "accept" from the call and then ran the following code (which modifies the structure created by cf, see my note above) if the file extension matched my pre-arranged set of file extensions and threw an error if it did not (I did this is because i'm actually storing the mime type for when i output it, not because a filter that rejects by file extension didn't work for me)
NOTE: macintosh and unix users may encounter issues because of this code on files without extensions. But they would have trouble with most measures as they are all based on file extension and thankfully, all of my admin users uploading documents are inside my firewall and i know they have windows pcs.
Code: (note fileUpload is the variable created by cffile)
<cfif fileUpload.clientFileExt eq "doc" and fileUpload.CONTENTSUBTYPE NEQ "msword">
    <cfset fileUpload.CONTENTSUBTYPE = "msword">
    <cfif fileUpload.contenttype neq "application">
         <cfset fileUpload.contenttype = "application">
    </cfif>
</cfif>
<cfif fileUpload.clientFileExt eq "ppt" and fileUpload.CONTENTSUBTYPE NEQ "vnd.ms-powerpoint">
    <cfset fileUpload.CONTENTSUBTYPE = "vnd.ms-powerpoint">
    <cfif fileupload.contenttype neq "application">
          <cfset fileUpload.contenttype = "application">
    </cfif>
</cfif>
<cfif fileUpload.clientFileExt eq "txt" and fileUpload.CONTENTSUBTYPE NEQ "plain">
     <cfset fileUpload.CONTENTSUBTYPE = "plain">
     <cfif fileupload.contenttype neq "text">
          <cfset fileUpload.contenttype = "text">
     </cfif>
</cfif>
<cfif fileUpload.clientFileExt eq "pdf" and fileUpload.CONTENTSUBTYPE NEQ "pdf">
      <cfset fileUpload.CONTENTSUBTYPE = "pdf">
      <cfif fileupload.contenttype neq "application">
          <cfset fileUpload.contenttype = "application">
       </cfif>
</cfif>
<cfif fileUpload.clientFileExt eq "wpd" and fileUpload.CONTENTSUBTYPE NEQ "wordperfect">
       <cfset fileUpload.CONTENTSUBTYPE = "wordperfect">
       <cfif fileupload.contenttype neq "application">
           <cfset fileUpload.contenttype = "application">
       </cfif>
</cfif>
<cfif fileUpload.clientFileExt eq "xls" and fileUpload.CONTENTSUBTYPE NEQ "vnd.ms-excel">
       <cfset fileUpload.CONTENTSUBTYPE = "vnd.ms-excel">
       <cfif fileupload.contenttype neq "application">
            <cfset fileUpload.contenttype = "application">
       </cfif>
</cfif>
<cfif fileUpload.clientFileExt eq "zip" and fileUpload.CONTENTSUBTYPE NEQ "zip">
        <cfset fileUpload.CONTENTSUBTYPE = "zip">
        <cfif fileupload.contenttype neq "application">
              <cfset fileUpload.contenttype = "application">
        </cfif>
</cfif>
<cfif fileUpload.contentsubtype eq "x-itunes-itlp">
       <cfset fileupload.contentsubtype = "octet-stream">
</cfif>
The final if is effectively a catch all for this specific problem which was that it was returning "application/x-itunes-itlp", and so if going through all that stuff on code with the proper file extensions doesn't work, then there's a bug in this code, it is, however, not the best way to handle it, and i hope to have time next week to follow Adam's advice and follow up WHERE the type is being modified.
Adam, can you point to a resource explaining how to use JWS to upload files? I'm still new to the java underbelly.

Calendar adds an extra day when creating an event in ios 8.1.3. Is this a known bug?

When i add an event using the calendar app in ios 8.1.3, it adds an extra day to the event when using a range of dates. I am able to recreate the problem. when entering the event i select a range of dates and confirm that it is what i want. after submitting, i verify and it has added an extra day at the end. Is this a known bug or am i on my own? Help please. this is annoying having to check each event after entering it.

Ive reset, restored and this is the second phone. Thought it maybe a wonky screen that would shift it while setting dates. THe only thing I can think of is that I am syncing with google calendar, but it only happens when setting events in ios not if i do it from google website on desktop PC.

In Thunderbird, I've created events in my calendar, but when I get a reminder (for an event), I cannot snooze or dismiss the event--I get the message "Modification Failed"

in Thunderbird, I've created events in my calendar, but when I get a reminder (for an event), I cannot snooze or dismiss the event; I get the error code "Modification_Failed"

This forum is just for Firefox support, for Thunderbird support you can ask in one of these forums:
* http://forums.mozillazine.org/viewforum.php?f=39
* http://getsatisfaction.com/mozilla_messaging

When I try to enter a new calendar entry I get the following message: "This calendar was created by mail, you can't add events to a mail calendar" what does it mean? I never had this message before.

When I try to enter a new calendar entry I get the following message: "This calendar was created by mail, you can't add events to a mail calendar" what does it mean? I never had this message before.

Check which calendar you are trying it put this event on, then put it on the correct one.

When I create a calendar on my mac it automatically syncs with my iPhone but none of the events on that calendar sync with my phone. How do I fix this?

When I create a calendar on my macbook it automatically syncs with my iPhone, but none of the events on that calendar sync with my iPhone. How do you fix this and make it so everything syncs.

Using iCoud?
On the iPhone tap Settings > iCloud
Make sure Calendars is switched ON.

Calendar is creating an extra event when the event spans the week view end of week to beginning of next week.

Similar Messages

Maybe you are looking for