Calendar is sending out new requests when I delete an event...
This goes under the bizarre category. After upgrading to Yosemite, when I delete an event, it is sending out new requests to the people that were on the event.
100% reproducible. We use Exchange Server.
Thoughts?
Macbook Pro, 10.10.
Mark
Phil, thank you for that info. I just found the incoming section, but is different from what you show. I don't have the "Delete from server" setting on my phone. After Authentication mine shows IMAP Path Prefix/ and then goes to the Server Port as the next setting. This is in my work email account and the one I really want to save on the server. Any other idea or explanation on why different??
On my personal account (Yahoo), the advanced screen was much different, but I think I found the same setting and changed it to never. That one appears to be working.
I appreciate your help a lot!!
Similar Messages
-
Carry out new pricing when key in access field is changed
Need automatic update to 'carry out new pricing' when field that is part of key combination is changed.
The system recognized the change when viewed in analysis, but amount is not updated unless "Update" button is manually pressed.hi,
you sales orders which are already created then you changed the access key. For these order unless you run an update pricing they cannot be updated. Now for the new sales orders which are going to be created if the new key combination matches the sales order criteria then it gets picked up automatically and you dont to do anything.
as we understand from access sequence setup, we do it frm the most specific to the most general ( while setting up the condition tables ie key combinations), So when a condtion record is found whether new key combination or old if its the relevant one and a condition is found for it, it gets picked up automatically.
regards
sadhu kishore -
User Calendar Invites Send Out Multiple Times Months Apart
Question, we have a user who's calendar invites will be created and sent out, and then the same calendar invite will be sent out again a month later. Does anyone know how to fix this problem or what the solution is?
Hi,
In addition, I want to double confirm this invite send out again in his Send folder or the invitee receive this meeting request again.
Just only one user facing this question? Please double check the outlook rule and add-in.
Please run Message Tracking log to get details about this message, also message header:
Get-MessageTrackingLog –Server “mailbox server” –Sender
“[email protected]” –Recipient “[email protected]” –MessageSubject “Read: message subject” | Select Timestamp, ClientHostname,ServerHostname,Source,EventID,Recipients,RecipientStatus,Sender | ConvertTo-Html > “C:\Test\Test.xml”
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support -
How do I send out an invitation when it won't show up in iCal?
When I create an event, I never thought about invitations. But I can recieve them, but today I wanted to send a party invite, and the invitee on the event would not show up. I don't know why, or how to turn that on, but it's really bothering me because its graduation season and I need my friends to know where to go for my party. So if anyone has any idea hit me up, I would love anyone's help!
There is no way to restore your iPod if it doesn't show in iTunes, although if shows up under "my computer" you could try a reformat there.
I only know the instructions for XP so I'm not sure if it's the same with Vista.
First, put the iPod into forced disk mode.
See: How to put the iPod into disk mode.
On your PC, go "my computer" and right click on the iPod, then choose "format". Ensure the settings are at "default" and that "quick format" is not checked. Now select "format". It will take a while, but when that's finished, restore the iPod using the updater.
To exit forced disk mode, reset the iPod. -
Do not carry out new pricing when plant change in sales order
Hi,
I have one z field in additional data tab in sales order. This field store the original plant if anyone has changed plant in Sales order. My requirement is to trigger the pricing in sales order with this old plant. I am not getting any exit for this.
Suggest me the solution.Hi
In the comments for the subroutine, it says:
* Parameter new_pricing controls the new pricing in the calling *
* form. It can be filled according the the allowed values *
* of domain KNPRS (Pricing type), for example: *
* ' ' = no new pricing *
* B = Carry out new pricing *
* C = Copy manual pricing elements and redetermine the others
So, you must write:
If VBAP_WERKS NE *VBAP_WERKS.
new_pricing = 'B'.
Endif.
Regards
Eduardo
Edited by: E_Hinojosa on Aug 25, 2011 8:21 AM -
Is it possible to send out notification request to approve PO?
Dear all,
In case user delete the mail which is workflow send out the PO needs his/her approval. How can I send it out the same nofitication to users?
Thanks,
AmyYou can not re-send the email.
However, the user can simply go to the workflow notifications screen.
Purchasing Superuser > Notifications summary.
The workflow notification will still be there. You can open it and approve the PO.
Hope this answers your question
Sandeep Gandhi
Independent Consultant
513-325-9026 -
How to simulate a click so as to send a new request ?
Hello,
I have a page loaded on my navigator.
I click on a action that modify the view displayed.
But, after this action, the page is not refreshed yet.
If I click on "refresh or F5" then this new request provoke the redisplay the page taking into account the modification of the view , it is exactly the behaviour I want (but automatically without hitting F5).
How to do this ?
Thanks
Edited by: ffl69 on Nov 24, 2008 9:50 AMYeah, you could be right but, I rely on a software and things are done like this. I need to change this behavior like quoted above.
I need to find a trick. -
I was prompted to download Firefox 4.0 and when I did and tried to open it I got an error message saying "You cannot open this application "Firefox" beacause it is not supported on this system. I have an older version of Mac OS X, 10.4.11, so I'm guessing that is the problem. Please direct me to where I can download an older version of Firefox that my system can support and next time please include system requirements with your update prompts.
Thank you for posting that link the-edmiester. I have already re-downloaded firefox 3.6.16 but will give tenfourfox a try. However, not to point the finger at you edmiester, my original question has still not been answered. Is it too much to ask for system requirements when I am prompted to download a new version of Firefox? I realize my computer is out of date and the longer I have it the less I'll be able to use it in this brave new internet world and I don't expect Mozilla to continually pander to me and others like me by keeping there web browsers compatible with older machines but I am fine with using older versions of Firefox. 3.6 works fine and when I saw that there was an update I thought "cool a newer version that would logically work better and faster than the one I was using" but that was clearly not the case. Like Redbeard I was forced to find an older version, re-download and re-install. Luckily I still had Safari, I shutter to think what would have happened if I had deleted it. As well, like Redbeard, this totally undermines my confidence in Firefox and I would hope that Mozilla cares enough about their users, you know the ones that create the need for their jobs, to at least address things like this in a timely respectful fashion.
-
OSX sends out Dhcp requests thru the wrong interface
I have setup an Xserve so far only providing file services over AFP. It is located in our computer room on a different broadcast domain. I use a separate machine as a DNS. I would like to use my Xserve's 2nd ethernet interface to provide Netboot/Netinstall services on a 192.168.x.x network for bulk imaging of our clients. I have enabled Dhcp and setup Netboot on the eth1 but the system.log shows that it is floding my computer room network sending dhcp requests from eth0.
I have checked the bootpd.plist file and the settings seem ok.Check your terminology.
it is floding my computer room network sending dhcp requests from eth0.
The only way it would send any DHCP traffic on en0 would be if en0 was configured to use DHCP for its own configuration.
Running as a DHCP server is entirely passive - nothing happens until the server receives a request from a client on the LAN. Only at that point does the DHCP server send any traffic out over the wire.
In addition, 'flood' is a relative term. How much traffic are we talking here? Are you talking a few packets such as in the normal DHCP client request/refresh cycle, or are you talking hundreds of packets a second? -
migrated from mobileme - now cant send emails or attach to emails before even trying to send (when i put cursor over the paper clip it stays a a bracket) and many of my contacts were lost !
I agree with the Thomas, in that I think you have mucked up your settings in the AOL account. Your username should be something like - [email protected] Your password is whatever you use as the password.
You could try deleting the account and start over again. Here is a link to a "how to set up AOL email " on the iPad. It is 4 or 5 step process and just make sure that you are entering the correct information in the correct fields in the set up. Among my 4 email accounts on my iPad, I have 2 AOL accounts. I have no problems at all and it was really very easy to set up. There is no reason why AOL email should not work on your iPad.
To repeat and emphasize - Just make sure that you are entering the correct information in the appropriate fields as I think that's where you are making your mistakes.
If I had my choice, I would probably chuck the AOL accounts as well, but I have all the spam filters set as high as I can on the server, and it has cut down tremendously on the spam. Unfortunately - we set up AOL accounts at my workplace years ago and I really hesitate to change them now, so I continue on with these, but like I said, they work fine and they were very easy to set up.
http://convert-dvd-ipad.com/dvdipad/set-aol-email-account-ipad-manually/ -
Calendar entries sending out notifications on shared calendars (again)
I have a MBP and many iDevices. My wife and I share some calendars. About 6 months ago every time one of us added or edited an entry on one of our shared calendars, the other received a notification. It went away in a few days.
Now it is happening again. I think this is an issue on Apple's servers.
Is anyone else experiencing this?
BryanI've had this same issue, as have others, for years. I think there's a long-standing bug or design decision in Mac OSX (or possibly iCloud) which causes these excess, unwanted notifications.
The way I solved this issue for me is to not use the internal iCloud calendar sharing, but to subscribe to the ICS file on each device I want to see this calendar. Use the webcal:// or https:// URL provided by OSX Calendar app. iOS, and Mac have mostly reliable, easy-to-use support for ICS subscriptions. This should work (perhaps with a helper app) on Windows and Android as well.
The subscribers to this calendar have (I believe) read-only access to the calendar, but also, no pesky notifications of changes. -
Need help in getting rid of this annoying pop up problem. All my Inbox keeps going off line. Comes back very intermitently.
That can't be it if it is working intermitently.
Actually, more often than not, this is caused by duplicate entries in either Mail's Outgoing SMTP servers, or in Keychain.
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it/them, or delete it/them and start over.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544 -
Thrown out of iMovie when trying to add event to movie
I upgraded to iLife9 and ever since then I am thrown out of the program once I try to add an event. I already re-installed the software but nothing helps.
Where can I find help to solve this, since now my upgrade is completely worthlessRan out of attachments, so here are the rest of the sub VI's
Attachments:
TEKLYNX Document Print.vi 28 KB
TEKLYNX Document Load.vi 16 KB
TEKLYNX Document Close.vi 31 KB -
Why can't I send out company e-mail or delete items in my company inbox?
I cannot send or delete email from my company e-mail site. I added my CRM into the pop up blocker but that didn't help.
Firefox doesn't do email, it's strictly a web browser.
If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
If your problem is with Mozilla Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/] <br />
or this one <br />
[http://forums.mozillazine.org/viewforum.php?f=39] -
Running out of memory when I delete apps does it give mee memory back
I
When I delete apps on my iPhone 4 with 32g it doesn't free up any memory? I goto settings,general, about and it says 28g used and like 4g free. I deleted almost all my apps and the memory stayed the same.
Why am I having this problem and what can I do to fix it? It seems like it is slowing phone down also. Plz help I really don't want to use reset option but if I have to I will.
Maybe you are looking for
-
Error While running the prgram in Second time..Frank Could u pls check this
Hi, I am using JDeveloper 11g. I have created a web application using ADF Business Components in JSF pages(Created the Bar Graph). When I am running the first it works fine. But when I try to run the second time it is giving some errors like Error 50
-
Disable standard print option in the classical report
Hi, I want to disable the standard print option in my classical report. How can i do that? Thanks in Advance.
-
Regular Expressions for converting HTML to Structured Plain Text
I'm writing a PL/SQL function that will convert HTML to plain text, but still preserve some of the formatting/line breaks. One of my challenges is in writing a regular expression to capture the text blocks while ignoring the markup. I'm trying to wri
-
HRMS configuration workbench - Benefits upload
Hi All , We are trying to use the HRMS Configuration workbench to load the benefits data , the seeded Web ADI excel spreadsheet always has only 20 rows in it by default . Is there a setting that could be changed so that by default the excel spreadsh
-
I get just a few seconds of video on my HDTV before it goes black.
I have a Mac Mini G4 1.25 with a DVI output. I recently bought a Belkin DVI-HDMI cable, which I used to connect it to a Panasonic 42" plasma TV. It worked fine for about 5 minutes (with a little overscan, but hey) and then the image started to sort o