Calendar list view in IOS7 not showing times

I have an iPhone 5 with IOS7. I have several calendar entries that when in the list view or search view, they show "all-day" on the left hand side when in fact they are not all-day, they have specified start and end times. This seems to happen when I first enter an item as all-day because the time has not yet been set, once the time is set I go back and edit the entry, turn off all-day, and put a start and end time. But when I go back to list view they still show as all-day. In single day view the appointments appear in their correct shaded time slots. Anybody else have this problem or know how to fix it?

Is Settings > General > Date & Time > Set Automatically : ON?
and the Time Zone: your city?
Also try
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

Similar Messages

Items to display in list view web part not showing the items setup

Hi, I have the following issue. I have a list view web part, but the web part is showing more items that the ones setup in the: Number of items to display in list view web part for this view.
It is because that works when using datasheet view and not a normal view? Is there any technical documentation from Microsoft supporting this?

thank you for your answer. It is interesting that the mobile view with the items to show in the mobile view doesn't work in the webpart, but it works when you are using datasheet view, but if you uncheck to activate the mobile view, then, the webpart doesn't
show information, so, it works partially because one part works and not the other.

SharePoint 2010 List View Web Part not showing for read-only users?

Hello all,
I have List View Webparts on my Blank Web Part page, and it's not showing for Read-Only users.
Is this intended by Microsoft or is it a bug?
Thank you!

Hi,
According to your post, my understanding is that the read only user could not see the list view web part.
Per my knowledge, the issue may be cause that the user do not have the proper permission for the list.
1. Check whether the user can access the list.
2. Check whether the user can view all the items instead of partial items in the list.
3. Check whether there are some fields refer to other lists or terms, especially the lookup field or managed metadata filed.
If that is the case, make sure the user can access the lookup list.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

SharePoint 2010 list view web part not showing conditional formatting

when I create conditional formatting in custom list is working fine & when it call through web part page (Data view web part) conditional formatting not showing. data is showing without conditional formatting.
Dinuka M.

When you use conditional formatting on some page it is writing inline CSS codes inside that page. thats why when you create a new page and add the same web part to that page, you must edit that page to apply conditional formatting to that
web part.
Best Regards, Mustafa Yılmaz MCITP, MCPD | www.mustafa-yilmaz.org | www.sharepointciyiz.biz
When you say edit the page, do you mean edit it in SharePoint Designer, or in SharePoint itself. And is it a case of just editing, then saving the page and it will apply the conditional formatting, or is there a specific property you need to edit, and if so,
what is it?

How can I see the calendar list view with ios7.1

Can't find a way to see the list view ( the only useful view) since I upgraded to ios7.1 on the iPhone 5c

May this help you:
http://help.apple.com/iphone/7/#/iph3d110f84

XCelsius list view selection does not show values of the last row/column

Hallo,
I have a list view selction in EXcelsius 2008 and there it shows the whole data as it sould and the correct line is marked as selected. When I embedd the swf-File in Crystal Reports 2008 the values of the last column and the last row are empty and the wrong line is marked as selected. What to do?
Thanks in advance for your help.
kind regards
Monika Anna

.. okay, the area definition in the data manager was incorrect. Now it works ....

List View Web part not showing all available views for list

We have added a list view web part to a page, and we get the "Current View" link in the web part...which is configurable when modifying the actual web part.
What we'd like to see (instead of having to click the ellipses button/context menu to get the other views) is the views displayed horizontally like when you are viewing the list itself.
When viewing the list itself, we see "All Items" "View 1" "View 2", etc.
Is this possible in the list view web part to display all available views in a horizontal/breadcrumb layout? Please advise.

The below works via alert, just need to now assign data to a <DIV> or element for display.
Trying this in simple webpart code snippet to get back all views:
    <script>
    var viewCollection = null;
        function runCode() {
            var clientContext = new SP.ClientContext.get_current();
            if (clientContext != undefined && clientContext != null) {
                var web = clientContext.get_web();
                var listCollection = web.get_lists();
                var list = listCollection.getByTitle("MyListName");
                this.viewCollection = list.get_views();
                //var viewInfo = new SP.ViewCreationInformation();
                //viewInfo.set_title('MyView');
                //this.viewCollection.add(viewInfo);
                clientContext.load(this.viewCollection);
                clientContext.executeQueryAsync(Function.createDelegate(this, this.onQuerySucceeded), Function.createDelegate(this, this.onQueryFailed));
        function onQuerySucceeded() {
            var viewInfo = 'Tasks list current views: \n\n';
            var viewEnumerator = this.viewCollection.getEnumerator();
            while (viewEnumerator.moveNext()) {
                var view = viewEnumerator.get_current();
                viewInfo += view.get_title() + '\n';
            alert(viewInfo);
        function onQueryFailed(sender, args) {
            alert('Request failed. ' + args.get_message() + '\n' + args.get_stackTrace());
    </script>
    <a onclick='return runCode();'>Click here</a>

Ical monthly view on ipad not showing time

My ical preference from my laptop is not carrying over to ipad. How can I get ical (in monthly view) to show appointment time withou

No, the appointments will not "get messed up". If you leave time zone support off the calendar will stay exactly as it was at home. If you turn on time zone support for the new time zone you're in ( or other country ) the appointment times will change or convert to times and days in that zone or country. When you turn off time zone support after returning home it'll all convert back to that time zone.
Example. You have an appointment (10am Thursday) with Joe in your hometown in Chicago. On Tuesday you fly to Tel Aviv and switch Time Zone Support on for Tel Aviv. The calendar will show the upcoming appointment with the newly converted time and date in the calendar. At that new time and date of the appointment it'll be 10am Thursday back home.

Calendar List view shows entries under the wrong date

I just upgraded to iOS4 and finding that my calendar entries are appearing under the wrong date in the calendar list view when I am viewing two calendars.
- List view is ok when viewing 1 calendar
- Day and Month views are ok at all times (ie: viewing single or multiple calendars)
- I have 2 Exchange accounts
- Calendar entries are appearing in the correct order, but under the incorrect date heading.
- When I intially added the Exchange accounts the calendar list view was fine at first (I could see both calendars correctly in list view) but after a short time later it became screwed up.
Anyone else experience this?

Same problem here since my upgrade to iOS4 - but I only noticed today.
I have 3 calendars set up:
Gmail (Exchange)
UK Holidays (iCal)
Birthdays
The exchange calendar is always wrong but the other two are correct when my exchange calendar is switched off.
It has mucked up my scheduling a bit for the next month. I only became suspicious when I noticed the Scottish Bank Holiday Monday at the beginning of August was showing on FRIDAY, 30th of July!

How to show next instance of Recuring Event in Calendar List View

We have a calendar that we are using to display upcoming events. However we are unable to get a clean output of next instance date for recurring events such as paydays or monthly meetings. As opposed to showing next instance it shows the date
the event was originally put in the calendar.
I am guessing it will take a custom script, but I don't even know where to begin with that.

Hi Swen,
According to your description, my understanding is that you want to display the recurring events as separated events in the calendar list view.
I recommend to create a Standard View, with Expanded Recurring Events for the calendar list,
and each instance of a recurring event will be showing in this view.
More reference:
http://office.microsoft.com/en-in/sharepoint-server-help/create-change-or-delete-a-view-of-a-list-or-library-HA102774516.aspx#_Toc337729214
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Calendar list view and search go back only 1 year

I have a new iPhone 4S (IOS5). Calendar List view shows entries only back to a year ago, yet Day, Month and Week views show all my entries going back to Oct 2008. Perhaps related: the monthly views in Reminders also go back just one year. A friend with an iPhone 4 and upgraded to IOS5 doesn't have this problem (with her Calendar; I don't know about her Reminders).
The problem also affects my global (Spotlight) searches as well, so I can't find entries earlier than Oct 2010. Is there some setting I have that may be causing this?
I should say that this problem existed for me on my 3G phone that I just replaced with the 4GS. But all the other Calendar problems I had with the old phone and IOS4 appear to be fixed. Only the one described above remains.
One more thing: My PC is Windows and I don't sync my Calendars with Outlook (or anything else, of course). When I used to do that I would get duplicate entries and other problems. (If I need to restore a lost Calendar entry, I'll use my iPhone backup, which runs every night when I sync my phone).
Is this a known Calendar problem still existing with IOS5?

FYI for those equally frustrated, I did place this in Feedback - not that it will result in an answer anytime soon. Why don't you do it too - get some momentum on this!

Modifying a Calendar List view

We have a InfoPath form library containing media items. Some of the items have start and end dates for which we have created calendar list views.
All of these calendar items display with 12:00 am - 12:00 am at the beginning of the display. I've seen posts about using the Event content type to hide start and end dates, but that does not seem to apply in this case. Does anyone know how I could hide
the useless times that are displayed in these calendar list views? i have attached a screenshot.
Thanks!
I should add that we are using only the start date for both start and end so that you are seeing when the item is first published, and not its duration. The times are unnecessary.
Leon Bryant

Hi Leon, you can do this one of two ways- adding a content editor to the page with code or use SP Designer to remove it. See the following links for details:
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/2627c446-f8df-4edf-bf29-6946d9391cf5/remove-time-from-month-calendar-view
http://www.codeproject.com/Tips/541676/SharePoint-Designer-Hide-Time-in-Calendar-View
cameron rautmann

Calendar 'list' view broken?

While the Day and Month views look fine, everything looks out of sync in the List view. A meeting I have scheduled for 7am Tues shows up on Sunday, while a meeting happening 2hrs later is showing up on Monday. Meanwhile, a 6.30pm Tues meeting is correctly showing up on Tuesday. ***...?

Hi,
I have the same issue since one week ago (iPhone 3GS, iOS 4.0.2).
Only 2 calendars on my Exchange mailbox are synced. Items show correctly on the day and month view, but in list view (which I use most), some of them appear under a wrong date. Annoying !
After restart and/or remove/add of calendars, list view takes a long time to 'load'. switching to day view and the back to list makes it appear (but unfortunately with the same problem).
Greetz,
Philip

Actual date hours PROBLEM - Displaying or not "Show time" in "User preferences"

Hello,
This is my current issue. I have a 5 days calendar with hours 7AM -> 8PM.
AM ->When I check "show time" in "user preferences", I show the good hours in ES and EF. When I apply AS and AF, AUTOMATICALY the good default hours are applied if i change the date (7AM -> 8PM)...
But, if i check, "do not show time" in "user preferences" and then i apply AS and/or AF changing date, PRIMAVERA apply automaticaly 00:00 in the hour ans "forget" the hours of the calendar...
It represent a big big problem for me, first of all in the gantt representation.
Any idea to fix this issue ?
Thanks

I think you need to do setting in grantt chart view setting..as Day,Week,Month in stead of user preference as " do not show time".

Calendar List View Sort Order

If I have two appointments set to the same time and length on the calendar, the sort order on the "month" view is sorted based on the title (this is great and what I am looking for). If I go to the "day" view or the "list" view the sort order appears to be random. I have tried to figure out what the sort order is for the list view and the day view but no luck.
I am using a second calendar in Outlook for tasks and setting all items to the same time and length. I can then create a task list that syncs to the iphone. Just can't get the sorting figured out.

Hi,
I have the same issue since one week ago (iPhone 3GS, iOS 4.0.2).
Only 2 calendars on my Exchange mailbox are synced. Items show correctly on the day and month view, but in list view (which I use most), some of them appear under a wrong date. Annoying !
After restart and/or remove/add of calendars, list view takes a long time to 'load'. switching to day view and the back to list makes it appear (but unfortunately with the same problem).
Greetz,
Philip

Calendar list view in IOS7 not showing times

Similar Messages

Maybe you are looking for