Calendar not showing all birthday

Is there a way to make iphoto to show all birthday's when making a calendar? I have a birthday calendar in ical and if more then one of my friends have a birthday on the same day iphoto will only show one, I know that in iphoto 09 it showed them all. So does anyone know how to get around this bug without having to type all of them in???
Thanks
Message was edited by: GLENMW

This is clearly a bug. I have multiple birthdays and holidays on the same date. iPhoto '09 handled this fine. When I attempt to show national holidays and show birthdays from address book, iPhoto only shows the national holidays. If I choose to only show birthdays it displays all birthdays, even if there are multiple birthdays for the same date. Deleting the iPhoto preference file had no effect. I have also tried to import iCal calendar's with the same results.
I usually order a few calendars at Christmas. I rushed out to purchase the new version of iLife. Given the delay in introducing calendars into 'iPhoto I would have expected better from Apple. I was excited to see the iPhoto 9.1.1 update yesterday but this did not include any fix for this issue. Apple, please take notice and fix this as soon as possible.

Similar Messages

In iphone 4 mobile me calander not showing all events in list view

i have iphone 4 Mobile me calendar not showing all events in list view where as showing all events in month/day view. why so & how to resolve

It started about a week ago. The "From" drop-dow is now missing in Mac Mail. It should appear beneath the subject line. I was working with MobileMe Chat support for about 3 hours. They cannot solve the problem and have now escalated it to the "Senior Advisor Team."

HT1296 my calendar is showing all the birthdays listed against people in my contacts list a day earlier than they should. Why?

Since receiving a new iPhone 4S to replace a previous phone, my calendar is now showing all birthdays as being a day before the date they are listedon within my contacts list. Any ideas why and how to rectify?

I posted this question a while ago and didn't receive any responses but there are a lot of people who have viewed it and 10 have said they have the same question so I thought I would update you that I added my nanny to my exchange server account (created an email for her) and I send all invites to that email address and they work. So sending invites from an exchange server account to a non-exchange server account apparently is a bug so to solve it, get on an exchange server I guess.

Shared Office 365 calendars not showing up in iCal

We are using Microsoft's Office 365 and have users with a variety of devices and applications (Mac/iCal/Mail, Windows/Outlook, iPhone, Android, etc.).
I am the administrator of the Exchange accounts. I have created four calendars that are viewable by everyone within our organization (just general "company-wide calendars").
Users with Outlook are able to view those shared calendars just fine. However, I'm not able to add the shared calendars with users using iCal.
If I add them as a delegate, they can see all my calendars, but if I just share the calendar, they get a "no access" error.
Here's where I'm setting the shared calendar permissions. I've tried setting them as Reviewer, setting the Default as Reviewer, and setting them as Owner.
Because it works fine in Outlook, I'm wondering if it's an iCal problem. For cross-referencing purposes, here's my issue at Office 365's community: Shared calendars not showing up in Apple iCal

Hi All, after much trial and tribulation, this works for me on BusyCal. It is an app you can get on the apple store.
Calendar should be created then shared with the busycal user. The link does not work, but add exchange account as you would on Mac Calendar under preference>accounts. The go to the sharing tab and click plus and type in email of person who shared calendar. It will auto populate. For some reason it does not work under delegation in Mac Calendar
The key and where I spent 4 days on the phone with apple and office 365, is that the owner of the calendar has to share their calendar, named :"calendar" They can just click the permission "show availability only." Once they do that, any other calendars they have created and added you as full permissions or details, you can see. I see nothing on their calendar called "calendar" Not the perfect solution, but it works. BusyCal is $30
If this does not make sense feel free to message me or I will respond here.

Text Entry Box not showing all text

I am creating a simple exercise where I would like the user to copy text from the course, paste it into word, and report back what the word count is. I thought perhaps the Text Entry Box would be the best way to go, since if you click on the existing (default) text, you can copy it. However after I place the paragraph of text in the box, and resize in the editor so that all the text shows, it does not show all the text when playing back, either previewd or published. It only shows the last few words of the last line at the top of the box.
Is there something I am missing? Or, is there an easier/better way to do what I need?
Thanks

Hi all
If this is Captivate 4, there may not be any need for a widget to do this. I'm guessing you haven't tried enabling the Scroll Bar for the Text Entry Box (TEB)?
When I just plop a TEB on a slide, I get this in edit view:
During playback it looks like this:
But if I edit the TEB properties and enable the Show Scrollbar option:
I get this in the output:
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

SelectOneChoice not showing all values from database

Hi!
I have to put a list of values in my select one choice. When I do the query in database, all the values are selected. But, with the same query on JPQL, the select on choice do not show all values in database. Anyone can help me, please?
P.S.: I am using SelectOneChoice with SelectItems, in JDeveloper 11g
Code:
<af:selectOneChoice id="selAction" value="#{row.idCmd}"
unselectedLabel="<Selecione>">
<af:forEach var="alertTypeNode"
items="#{bindings.actionFindAll.iteratorBinding.allRowsInRange}">
<af:selectItem value="#{alertTypeNode.dataProvider.idCmd}"
label="#{alertTypeNode.dataProvider.nmCmd}"
id="si1"/>
</af:forEach>
</af:selectOneChoice>

In your page binding check the rangesize setting for the executable you use - set it to -1.

Transaction MD04 does not show all open sales/orders deliverys

Hi,
Transaction MD04 does not show all open deliverys and sales orders for plant 0705 and certain materials.
Can anyone tell me the reason for this?
Regards,
Brijesh

Hi
Run SDRQCR21 report in Transaction SE38 for that material it will resolve your issue.
Please confirm
Amit

Analysis does not show all rows returned by SQL

Hi.
OBIEE 11.1.1.7.0
I have a strange problem. I have a simple table that should return customer number and sales. The report will show all of the sales, but it does not show all the customer numbers. The SQL that OBIEE creates does return all of the customer numbers. When I remove the sales and just include the customer number, the report only shows a couple of the customer numbers (it should show several hundred).
I guess what I'm looking for is any advice for how to debug this. I have spent about 3 days on this problem, so I have tried to look at it from every angle (data, RPD, report).
Any suggestions are appreciated.
Thank you.

Thank you for your reply.
New development. The issue has to do with a descriptor ID column. The customer number column is a varchar field and I set the descriptor ID column to the column_ID field. When I remove the descriptor ID setting, I received all custom numbers.

I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address. How can I re-gain access to those hundreds of purchased songs?

I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address. How can I re-gain access to those hundreds of purchased songs?

You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

Ical not showing all day events in lion osx

ical does not show all day events

Hi,
I noticed that the issue only happens to specific user with specific computer. Please do the following checking to narrow down the issue:
1. please update the Outlook client with the latest patches and service packs.
2. disable using Exchange cached mode and check whether the issue happens in Online mode in this computer.
3. Start
Outlook in safe mode to have a try.
4. Perform a clean boot
in your Windows for the new machine.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

List view not showing all podcasts

Guys, I have the annoying problem that podcast management by itunes and the podcast app are F'ed up.
Not too lobg ago I experienced my ipad greying out most podcasts that were downloaded and on my ipad, for no reason at all. it took me 2 days fiddling with settings and ended up having to set every sync to "on" and set donwloading to "all" and "keep all podcasts"
Now I'm experiencing the problem that the "list" view in podcast app, is not showing all podcasts, but the "thumbnail" view is (as far as I can tell...). Why is this and how can I fix it to make sure both views show everything?
I'm running iOS 7.0.6 and iTunes 11.1.5

Hey there sporry,
It sounds like your Podcasts app is not showing your library correctly in the List view but Thumbnail looks ok. I recommend the troubleshooting in the article named:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Restart the app
Close the app and open it again.
Restart your device
Turn the device off and on.
Update your device software and your apps
Update your device to the latest version of iOS.
Update your apps:
Open the App Store and tap Updates.
If updates are available, tap Update All.
If asked, enter your Apple ID password. The updates will download and install.
You might need a Wi-Fi connection to update some apps.
Install another app from the App Store
If your installed app won't open, download and install a free app that isn't on your iOS device. This should reset your Apple ID authorization.
Remember to use the same Apple ID that you used to download the app that you're having issues with.
Reinstall the app
Remove the app from your device and reinstall it. Remember that deleting an app also deletes its data.
Delete the app.
Press the Home button.
Go to the App Store and download the app again.
Wait for the app to download, then open it from the Home screen.
If the download stops, you can resume it.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Account Dimension not showing all members in the cube in Analysis Services

Hi,
         In SAP - BPC 5.1 after processing account dimension all the members are created under account dimension in analysis services but the same cannot be found in the data cube. Hence the reports generated through SAP - BPC is not showing all the members.
         The issue looks very strange as we can see the members getting created but the same is not getting populated in the cubes. I am not able to visualize what exacly the issue is? Is it with the application or with the analysis services?
Thanks
Sharath

Your sixth sense is correct, there is definitely support in MSAS and BPC 5.1 for multiple hierarchies in the account dimension.
I'm also referring to parentH1 and parentH2, but perhaps we're still speaking of different things.
In the past, I faced a very similar problem as you, and the root cause was because I had one member, let's call it FancyParent, which, in H1, had children Child1 and Child2.
But in H2 it had children Child1, Child2 and Child3. I forget now if that was how I wanted the setup to be, or if it was a mistake on my part, but either way, MSAS doesn't allow this. The admin consol didn't complain when processing the dimension -- this was in Outlooksoft 5.0; perhaps validation has improved now.
But the cube was completely unworkable. Certain things were calculating correctly, but everything in the account dimension in the area around FancyParent (above and below it, in both hierarchies) was quite unpredictable.
By disabling first one, and then the other, of the two hierarchies, and disabling blocks of accounts, I was eventually able to pinpoint the problem. But it took days to figure out what was the problem. (The account dimension had 2500 members and 4 hierarchies, and it was not a pretty sight.)
A parent must have the same definition of children in all hierarchies. It can't, as another example, have children in H1, and be a base member in H2. Each member can have different parents in the two hierarchies, but must always have the same children in both.
To work around this problem, I had to create two separate accounts NetIncomeH1 and NetIncomeH2 (and PretaxIncomeH1, PretaxIncomH2, etc. all the way down to the point where they branched off), to get the two separate aggregations of the P&L in the two hierarchies. Once I did that, it made sense to me why, but I also swore off on frivolous extra hierarchies ever again.

BI publisher report is not showing all the data

Hi All,
I have created a report using BI Publisher in R12. The report is not showing all the records.
I have checked the result XML it is also not having all the data. My query returns 846 rows but my report only has 662 rows.
what might be the issue.please give me some idea to resolve this issue.
Thanks in advance.
Regards,
P.Kalidoss

Hi Arun,
In the following code: public SelectItem[] getAllPrinters() {
if (allPrinters == null) { // allPrinters is not defined. what type of object it is
PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
allPrinters = new SelectItem[printers.length];
for (int i = 0; i < printers.length; i++) {
SelectItem printer =
new SelectItem(printers.getName(), printers[i].getName());
allPrinters[i] = printer;
return allPrinters;;;
Variable allPrinters is not defined. what type of object it is?
And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
id="soc1"
autoSubmit="true">
<f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
</af:selectOneChoice>.
Thanks.

IPod touch not showing all music

My ipod touch is not showing all of my music in 'songs', which I assumed showed all music on the device. I have about 7 Third Eye Blind songs on here and I can find all of them using the 'search ipod' tool, but only 2 of the songs show up in the music app. This is an example. I have about 1000 mp3's on the device but only about 300 or 400 of them seem to be visible unless i do an OS search for the individual file.
Also, the device is not showing file names correctly. I assume it looks at 'tags' or something for the info. well, this is really annoying. It should show the file name because sometimes i rename files to find them easier.

I think I at least know now why music isn't showing up. It looks like the songs not showing have id3 v1 tags in the file. I'm using mp3tag to batch convert all songs to id3 v2.3.
Nice to know i've gone all this time without hearing a large percentage of my music.
I say either develop better software for detecting ALL mp3 music or get rid of this stupid 'tag' thing altogether. I highly doubt the latter is possible, so..

In solution manager system not showing all the system in SLD

Dear Gurus,
During the installation of solution manger sysyem i selected as a Central SLD as solution manager
Later installed ECC 6.0 and EP systems selected SLD as solution manager system during the instllation.
If i login in to http://hostname:50000/sld (solution manger system) and the screen also not showing all the options also. some options missing in the tab. Wat I need to do to see all the options clearly.
It is not showing all the systems if i check in EP and ECC for SLDCHECK it is not givng any errror.
But if i login into solution manger not able to see all the system in SLD.
Regards

Thanks for reply
it is not showing all the systems

Calendar not showing all birthday

Similar Messages

Maybe you are looking for