Calendar not syncronized - log file empty

I'm using dm 4.5 and I'am trying to syncronize the calendar of 8310 (firmware 4.5) with outlook 2003 but the DM doesn't do it.
The preferences are set up, I mapped the folders but when I launch the sync task, DM syncronize correctly my contacts but it misses to syncronize the calendar; looking at the log file I don't find any trace of the activity.
Can someone help me?
thanks,
Enrico

any solution please

Similar Messages

Could not open log file in Win2000 sp3 Message in console

I have configured log file for ias. Then restarted my Application server. It is giving Error message "Could not open log file ''logs/logVal.10817" in kas window. But logs files are there (created by the server itself) in the logs floder.
I have configured logs for two systems.
One system is noted all messages in the file
Second system did not not any messages.
But the files are existed in the logs folder in both the systems.
I need to configure logs for ias,Kjs and KXS also.
Please suggest me regarding this.
thanks
sudheer

Hi,
I'm not sure what operation are you trying to, can you please confirm that ? Please check what kind of messages did you try to log, is it only errors ? or all errors & warning or all messages ?. If it were only errors and warnings, then there is a possibility that the server did not encounter any of this, due to which the log file can be empty.
Regards
Raj

BACKGROUND JOB WAS NOT SCHEDULED/LOG FILE NOT YET GENERATED

Hello,
To generate the log report, /VIRSA/ZVFATBAK program is scheduled on hourly basis but some time report doesn't get generated and if we see the background job then it shows sucessfully finished.
If we see the maually the log report for FFID then below error message is displayed.
" BACKGROUND JOB WAS NOT SCHEDULED/LOG FILE NOT YET GENERATED"
Can anyone guide me to solve the issue.
Thanks in advance.
Best Regards,
Prashant Dubey

Hi,
once chk the status of the job by selecting that and check job status(cltr+shift_f12)
since it was periodically scheduled job there will be a RELEASED job after every active job..
so try to copy that into another job using copy option and give some new name which u have to remember...
the moment u copy u can find the same copied job in SCHEDULED status...
from here, try to run it again on hourly basis....
After copying the job u can unschedule the old released job to scheduled otherwise 2 will run at a time...
rgds,

Teradata fast load log file empty

hei all,
after update odi 11g teradata fast load script not running, error tells to see the log file but log is empty
any solution
naseer

any solution please

Log shipping is not restoring log files ata particular time

Hi,
I have configured log shipping and it restores all the log files upto a particular time after which it throws error and not in consistent sate. I tried deleting and again configuring log shipping couple of times but no success. Can any one tell me
how to prevent it as I have already configured log shipping from another server to same destination server and it is working fine for more than 1 year? The new configuration is only throwing errors in restoration job.
Thanks,
Preetha

Message
2014-07-21 14:00:21.62   *** Error: The log backup file 'E:\Program Files\MSSQL10_50.MSSQLSERVER\MSSQL\Backup\Qcforecasting_log\Qcforecasting_20140721034526.trn' was verified but could not be applied to secondary database 'Qcforecasting'.(Microsoft.SqlServer.Management.LogShipping)
2014-07-21 14:00:21.62   Deleting old log backup files. Primary Database: 'Qcforecasting'
2014-07-21 14:00:21.62   The restore operation completed with errors. Secondary ID: '46b20de0-0ccf-4411-b810-2bd82200ead8'
2014-07-21 14:00:21.63   ----- END OF TRANSACTION LOG RESTORE     -----
The same file was tried thrice and it threw error all the 3 times.
But when I manually restored the Qcforecasting_20140721034526 transaction log it worked. Not sure why this is happening. After the manual restoration it worked fine for one run.ow waiting for the other to complete.
This seems strange to me error points to fact that backup was consistent but could not be applied because may be restore process found out that log backup was not it correct sequence or another log backup which was accidentally taken can be applied.
But then you said you can apply this manually then this must be related to permission. Because if it can restore manually it can do it with job unless agent account has some permission issue.
Ofcourse more logs would help
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

[SOLVED] dvd drive not working, log file filled with error.

hi,
i dont know if this is something to do with the latest kernel update or something else that may have occured.
but my dvd writer has stopped working. no light on the front, pressing the button does not open the tray.
it wtill works fine when i boot into windows (dual boot with XP) so it's not a hardware issue.
also my everything.log file is filling up with the following every two seconds!
Mar 1 19:27:56 adax hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
Mar 1 19:27:56 adax hda: status error: error=0x00 { }
Mar 1 19:27:56 adax ide: failed opcode was: unknown
Mar 1 19:27:56 adax hda: drive not ready for command
Mar 1 19:27:56 adax hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
Mar 1 19:27:56 adax hda: status error: error=0x00 { }
Mar 1 19:27:56 adax ide: failed opcode was: unknown
Mar 1 19:27:56 adax hda: drive not ready for command
Mar 1 19:27:56 adax hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
Mar 1 19:27:56 adax hda: status error: error=0x00 { }
Mar 1 19:27:56 adax ide: failed opcode was: unknown
Mar 1 19:27:56 adax hda: drive not ready for command
Mar 1 19:27:56 adax hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
Mar 1 19:27:56 adax hda: status error: error=0x00 { }
Mar 1 19:27:56 adax ide: failed opcode was: unknown
Mar 1 19:27:56 adax hda: drive not ready for command
can someone please help me before i run out of disk space for my logs!
thanks,
ad.
Last edited by adax (2008-03-01 23:25:37)

Hello,
I strongly suspect that you need to change 'ide' to 'pata' in your /etc/mkinitcpio.conf
#HOOKS="base udev autodetect ide scsi sata usb keymap filesystems"
HOOKS="base udev autodetect pata scsi sata usb keymap filesystems"
Then recreate with:
mkinitcpio -g /boot/kernel26.img
Last edited by colnago (2008-03-01 21:21:37)

SharePoint is not crawling .Log File Types

Does a default SharePoint Search installation understand and know how to crawl .log file types? "log" was added as an allowable file type. Is there a specific iFilter needed? Thanks for any tips provided.

Hi obautista，
This is by design, because the default ifilter installed with SPS2010 does not support .log type.
Please refer to
File types and IFilters reference (SharePoint Server 2010)
To index .log type file, you need to install an ifilter, unfortunatelly, i didn't find any ifilters for that.
If you do need this feature, you may want to write your own ifiter.
Refer to:
How to Build an IFilter for SharePoint 2010 Search and Windows Search Using C++, ATL, and MFC
Best Regards,
Tom
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to
other community members reading the thread.

Problem: oad.log file empty.

I have installed ias9i (1.0.2.2) on AIX cluster (4 cards). Installation went successfuly. Discoverer proceses started but I can't log into discoverer viwer. The message is:
"Unable to bind oad"
So I followed all advaices published on metalink:
1. Nslookup -> OK.
2. Check pref.txt for MachineIP and applypreferences.sh -> OK.
3. Add -a -OAipAddr -a 147.181.239.43 to registersession.sh, registerlocator.sh, registerpreferences.sh -> OK.
4. Add -OAipAddr 147.181.239.43 to startlocator.sh -> OK.
5. Add -OAipAddr 147.181.239.43 to startoad.sh or -host 147.181.239.43 to oadutil -> Failed.
The oad starts but it seems that in other subnet (locator cannot contact it and registersession also), but I can't check that because oad.log is empty (I have added -v option ofcource).
I have tried to restart all services, delete logs and so on several times.
What is the problem? Thakns in advance for any help.
regards
Krzysztof

Could you please repost this question over on the Flash Professional forums? This forum is primarily for end users, the Pro forums will get you in touch with a wider developer audience.
Thanks,
Chris

App Builder not creating log file (CDK.EnableLog=True)

Hi All,
I am busy trying to get a small to medium size project to build in LV 8.6.1.
During the build I get all kinds of weird errors (1503, 1357), even with a trivial app that uses a typedef that has all the classes bundled together.
As mentioned, the app uses LVOOP, and also lots of similarly named VIs (in different library namespaces though), and I am 99% sure LV is struggling to resolve the same VI name issue.
In order to debug the build process I have tried inserting the CDK.EnableLog=True key into LabVIEW.ini, but no log file is produced during any of my builds (good or bad!). I have tried using TRUE, true, True for the key but none of these seem to work, when I look in %TEMP% there are files related to the build name_log.txt, but they contain only very basic information like the name and OS etc.
Any ideas how to get the build log file to appear???
nrp
CLA

Hi,
The build log process is shown here: http://digital.ni.com/public.nsf/allkb/2E19F4E72C29CF5C862570D2004FC604?OpenDocument
However this only shows detailed information when creating an installer, is this an executable that you are attempting to distribute when the errors mentioned appear or do the errors occur during the creation of just the executable? (This could be why you get a log with very little information)
Kind Regards,
Applications Engineer

Var/log/mail.log file empty

My var/log/mail.log isn't logging anything, the file seems to empty since 4th March 2010 3:15 AM
Have tried the below mentioned troubleshooting steps, but no luck though
1. Stopped and restarted mail service
2. Repaired disk permissions through disk utility application
3. Repaired permissions through terminal diskutil
4. Restarted daemons as suggested in this forum http://discussions.info.apple.com/thread.jspa?threadID=2088823&tstart=60
5. Changed permissions as suggested on this forum http://forums.macosxhints.com/archive/index.php/t-13985.html
Any help please!!!

Change the archive log to 3 days. Make sure all three log levels are set to information. Restart mail and see if any thing appears in the logs.
Also how are you viewing the logs - using SA or Console?
Thanks,
Henry

GRC FF 5.1 BACKGROUND JOB WAS NOT SCHEDULED/LOG FILE NOT YET GENERATED

I've had FF installed in prod for 4 days. I just now got around to running the /VIRSA/ZVFATBAK job. However it only generates the logs for the last 24 hours. I know when you schedule the batch run to run hourly this will be resolved but I wanted to run the /VIRSA/ZVFATBAK job manually the first time because I knew it would take longer than an hour. Is there a variant I can use in SE38 to get these earlier logs generated?
thanks for your help
Dave wood

You can create your variants in SE38. It does not come up with the programs. For Spools, you can get upto 3 days of logs while for the work logs, it will be a week max. But, i think you can change the system parameters in such a way you can retrieve the logs of the jobs for more than a week.
Thanks
Sudhan Shan

SQL LOADER NOT GENERATING BAD,LOG FILES

Hi
I am calling sqlloader from sql script using host command.We are using parameter file to mention about bad,log,ctl files.sql loader is running successfully all the records are inserted.but the problem is ,it is not creating log file,bad files ....Please give me suggestions.
Thanks.

Hi,
As per ur saying the recodes are inserted successfully, so the bad file wont get created. And considering the log file, the path should mentioned in the CTL file and if not mentioned then the log file will created in the same area where the CTL file with the name of ctl file with extension .log instead of .ctl

JCO - request response log file

Hi
I could not find log files of the Request and Response to ERP (using JCO). Anyone has idea where I could see the log?
thanks

I know in workbench of the XML output method - this is not what I am looking for. I have the XML request and response but I would like to see how MII sends this request and response
From the Netweaver, I did what you suggested but I got an empty page. No logs.
(show view Expert, display log dev_jrfc.trc)
The reason I am asking is that I sent in a BAPI with JCO (BAPI_MATERIAL_GETLIST ) note: at the end of the BAPI name is an empty space. In workbench when I generate sample, the Rquest and response has BAPI_MATERIAL_GETLIST_ .
In XML Request it is written <BAPI_MATERIAL_GETLIST_> and the response is <BAPI_MATERIAL_GETLIST_--20>. The weird thing is I got the Material list that I required.
So I would like to see what exacly being sent out BAPI_MATERIAL_GETLIST_ or BAPI_MATERIAL_GETLIST and what actually the repy I got from ERP BAPI_MATERIAL_GETLIST or BAPI_MATERIAL_GETLIST_--20
it could be a bug in MII 12.1

LOG FILE for batch scripting in MAXL

Hello,
I just wanted to know how to create a LOG FILE for batch scripting.
essmsh E:\Batch\Apps\TOG_DET\Scripts\unload_App.msh
copy e:\batch\apps\tog_det\loadfile\gldetail.otl e:\hyperion\analyticservices\app\tog_det\gldetail /Y
essmsh E:\Batch\Apps\TOG_DET\Scripts\Build_Hier_Data.msh
REM
ECHO OFF
ECHO Loading GL actuals into WFS \ Combined......
E:\HYPERION\common\Perl\5.8.3\bin\MSWin32-x86-multi-thread\PERL.EXE E:\Batch\Apps\WFS.COMBINED\AMLOAD\WFSUATAMLOAD.PLX
E:\HYPERION\common\Perl\5.8.3\bin\MSWin32-x86-multi-thread\PERL.EXE E:\Batch\Apps\WFS.COMBINED\AMLOAD\WFSUATAMLOAD.PLX
Drop object d:\NDM\Data\StampFiles\STAMPLOADBKUP.csv of type outline force;
Alter object d:\NDM\Data\StampFiles\STAMPLOAD_cwoo.csv of type outline rename to d:\NDM\Data\StampFiles\STAMPLOADBKUP.CSV;
SET LogFile=E:\Batch\Apps\TOG_DET\Logs.log
This file does not generate log file can any help me what might be the problem? Even though some of the steps above are not correct it should generate me log file atleast. I need syntax or whatever it is to generate Log file.
Regards
Soma

I wanted to have a logfile of the following batch script regardless of whether the script is running or not.
essmsh E:\Batch\Apps\TOG_DET\Scripts\unload_App.msh
copy e:\batch\apps\tog_det\loadfile\gldetail.otl e:\hyperion\analyticservices\app\tog_det\gldetail /Y
essmsh E:\Batch\Apps\TOG_DET\Scripts\Build_Hier_Data.msh
REM
ECHO OFF
ECHO Loading GL actuals into WFS \ Combined......
E:\HYPERION\common\Perl\5.8.3\bin\MSWin32-x86-multi-thread\PERL.EXE E:\Batch\Apps\WFS.COMBINED\AMLOAD\WFSUATAMLOAD.PLX
Drop object d:\NDM\Data\StampFiles\STAMPLOADBKUP.csv of type outline force;
Alter object d:\NDM\Data\StampFiles\STAMPLOAD_cwoo.csv of type outline rename to d:\NDM\Data\StampFiles\STAMPLOADBKUP.CSV;
What I really want is I need a log file of the above batch script, how the above scripts are running. I do not care whether they are giving me positive results but I need to know what is happening in logfile. HOw will the log file be generated.
Regards
SOma

Adobe 9.5 deletes log files - need to turn off creation of log files

We have a bunch of files from SAS outputs that include a .sas, .rtf, .log extensions.
When we try to convert a batch of the .rtf files to PDF by right clicking on them, the .log files are deleted. The originals are not Adobe .log files, but required files from the SAS output.
I have unchecked "Delete Log Files for Successful jobs" in both Distiller and the Adobe printer preferences.
It only deletes the .log with the same name as file types associated with Word. If I create .txt or xls files and .log files with the same name (i.e. test.txt and test.log) it does not delete the .log file, but it is overwritten by the Adobe log.
This happens whether the file is local or on a mapped network drive.
If I save to a different location, the .log is not deleted or overwritten, but that is really just a workaround. It's doable if it's the only option.
They can also copy only the .rtf files to another folder and copy the .pdf files back after, but this is alot of extra work for high volumes
This is an ongoing need involving lots of files, so moving or renaming is not an option, even with batch programs.
What I really need to do is stop Adobe from creating AND deleting log files or force it to create the .log files in a different location than the original. Unless the problem is Word, but I cannot find any information on this problem.
Thanks
Mike

Hi Shay,
You are right, it would make perfect sense, however as you can see from the below forum, I was not able to solve this compilation issue..
Oracle 10g Email Portlet - HELP PLEASE!!!
(First post is the issue).
If you have any ideas on how I could solve it, it would be great.
Thanks
Sam

Calendar not syncronized - log file empty

Similar Messages

Maybe you are looking for