Calendar on iPad not updating after iOS8

After updating to ios8 i noticed that the calendar on My ipad wouldnt update events added on my i
Phone. Events added on the ipad do sync over to the iphone. I tried turning calendar sync on and off on the ipad, but that just added two entries for some events, after an warning that the calendars would be put together.
I'Ve checked all settings and they are the same on the iphone and the ipad. Push is used with 15min set if push doesent work.
I've also noiticed that the "sync animation" in the upper left corner, never spins when i open the calendar like it did before. It's like a bug in the calendar.
If i manually update the calendar, all events sync. Never had any issues with this before.
IPad3 running ios8.0.2
iphone 5S ios8.0.2
Magnus

"I tried turning calendar sync on and off on the ipad, but that just added two entries for some events, after an warning that the calendars would be put together."
That is not the update bug, something that happens to you does not make sense. For example that sentence does not make sense if icloud setup properly, which tellls me it is not, but I can't pinpoint what is wrong.

Similar Messages

  • Ipad mini apps not updating after ios8.2 update

    apps not updating after software update ios8.2 on ipaD MINI WITH RETINA SCREEN

    Turn off any auto-update, if it is on, then tap any of the "circle icons" showing that a download is in progress, in order to stop the download. Then go to the Settings and reset the Network Settings. After the iPad starts back up, then check to make sure no apps are currently in progress of downloading. If any are, stop them again, and reset the network settings again. When it starts up again, none should be in the process of downloading. Then from that point forward, only download manually and never more than two at a time. If it is more than 100 MB, then do only one at a time. If any gets stuck at that point, then stop the download and reset the Network settings.
    That should take care of you for now. We'll see what another update brings ... IOS 8.2 (which might be the next one).

  • IPad Air Apps will not update after ios8.0.2

    I Now have 17 apps that will not update after I updated my iPad Air to 8.0.2. What gives?  Some apps are stuck in mid update, so i can't use them. My wifi works. I have restored my iPad twice using iTunes. I have plenty of empty storage. I have reset my iPad. I'm out of ideas.

    I have been having the same problem but was able to get around it by updating the apps in iTunes on my Mac then syncing my iPad to iTunes on my Mac. Certainly not an elegant solution but until Apple gets this fixed it is the only way I have found to get updated Apps.
    Tim

  • Ipad not restoring after IOS8 update

    I attempted to update to ios 8 on my ipad air.
    However my ipad was too full, so i deleted some apps/data and reattempted.
    When I did the screen gave a message to connect to itunes. When I did it downloaded the software but I then had to restore the ipad.
    When I attempted to restore, the ipad will not recognise my apple ID - Incorrect Apple ID "n*******@*********.uk" cannot beused to unlock this ipad.
    However I know this is the ID/ password for this Ipad as I have a couple of ipod touchs on the same account that I use for school in tandem with the ipad.
    When i try a different account or incorrect password I get a different message "Incorrect Apple ID or Password" so it appears I am using the right ID, but the ipad cannot use it.
    Regards
    Nicola

    I attempted to update to ios 8 on my ipad air.
    However my ipad was too full, so i deleted some apps/data and reattempted.
    When I did the screen gave a message to connect to itunes. When I did it downloaded the software but I then had to restore the ipad.
    When I attempted to restore, the ipad will not recognise my apple ID - Incorrect Apple ID "n*******@*********.uk" cannot beused to unlock this ipad.
    However I know this is the ID/ password for this Ipad as I have a couple of ipod touchs on the same account that I use for school in tandem with the ipad.
    When i try a different account or incorrect password I get a different message "Incorrect Apple ID or Password" so it appears I am using the right ID, but the ipad cannot use it.
    Regards
    Nicola

  • Why do Apps not update after installing iOS6?  They just hang there!

    WHy do apps not update after installing iOS6?

    Each time? every day? Just plain crazy! Updates happen automatically on your mac....why not the same thing on ipad/iphone?
    If the app was purchased on my phone with my account, surely they do not need to "verify" my credentials each time. If my phone was stolen and someone purchased a $20 app surely my $300 phone is more important?
    They need to come up with e better solution...when we all have hundred or thousands of apps on our devices what then?

  • Email not updating after IOS 8.1.2

    Email not updating after installation of IOS 8.1.2.  On ipad, ipad2, and iphone. How to roll it back to the prior version?

    HHaving the same issue here,im don't think you can roll back.
    did it start after crashing while trying to send an email with multiple attachments?

  • Apple Configurator insisting new iPads should update to iOS8

    I am in a tricky situation and am somewhat frustrated.
    My school have bought new iPad minis. I am currently running OSX 10.8.5. When I go to prepare them, it is insisting on them trying to update to iOS 8. The do not update option is greyed out unless I select unsupervised, which I don't want.
    The problem is iOS 8 needs Apple Configurator 1.6. This in turn needs OSX 10.9 Mavericks. I have tried to update it but it warns me that 10.9 supports OSX Server 3 and unless I purchase an upgrade for Server 3 my server will be disabled.
    I find this ridiculous for a number of reasons.
    1. Why is it trying to update to iOS 8 when my version of Apple Configurator can't handle it?
    2. Why do I not have the option to not update to iOS8?
    3. Why to allow me to use the iPad minis that had I plugged in before iOS8 came out would work perfectly fine, do I have to buy an upgrade to retain the functionality on the server that I have now?
    4. I should not have to make the choice between getting my iPads setup or losing my server functionality.
    If anyone has any solutions to this I would be very grateful. At the moment I have 16 iPad minis sitting there not used because Apple Configurator is refusing to set them up.

    I had the same problem.  I finally found the solution:
    "Hold down the Option button when you Click on the Devices menu in Configurator.  You'll get the option for Edit Custom iOS Versions and then you can point it your *.ipsw file. "
    https://discussions.apple.com/thread/6544047
    I found the iOS 7.1.2 .ipsw files here:
    http://osxdaily.com/2014/06/30/ios-7-1-2-update-download/

  • PO item change is not updated after Delivery completion

    Dear All,
    PO item change is not updated in the PO at the completion of the delivery.for a particular line item. In our QA system, its updated but client is facing an issue with the production system. Pls check the attached screen which I got from QA. There is no such log in the production system. Kindly help me to have a solution for this.
    Regards
    Sujith

    Hi Dev,
    After we post the GR for a PO line item, PO history is updated (line) and at the same time that particular change log is available under PO line item. But in production system, said log is not updated after GR is completed fully.
    Rgs
    Sujith

  • Recent files list is not updating after 10.1.13

    Recent files list is not updating after 10.1.13 update unless I open the file via the Network in Windows Explorer.   If I open a file by accessing the file via a drive listed under Computer, the recent files list does not update.  The recent files list updates only if I open the file from the same drive listed under Network.

    Hi Bert ,
    You might want to report for a possible bug.Please refer to the following link for the same.
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
    Regards
    Sukrit Dhingra

  • Picked Quantity is not updated After delivery in Vl03n

    After delivey in Order (VA03), the picked quantity is not updated Properly(VL03n). It is coming as Zero.
    Is it any configurations needed or writng any code.
    For that I put Break point in FMs like SD_DELIVERY_UPDATE_PICKING in program RVADEK01.
    But it is not stopping the Program.
    Please give any possible solution.

    Hi Vinod,
    Thank u For ur Answer.
    Just my Fuctional Consultant given Procedure.
    How to test the picking list. The problem is after Deliver  the Order quantity in VA03 and after saving, this will creates One Out Bound delivery.
    Now We r checking VL03n. Now it is updating the Picked Quantity Correctly, For that We r using the Standard Print program: RVADEK01, Form: RVPICSKSIN.
    Output Type: EK00, Application: V4.
    Here My problem is We copied the Form and print Program and modified according to our requirement and they configured in Nace with our own Output type.  We haven't chenged the updated Functionality and Not even Standard program. We wrote some include program for getting new values in scripts.
    Now the picked quantity is not updated after picking in VL03n.

  • Node.length not updating after removeInstance

    I have a dynamic form where line items can be added dynamically. I also have a button to remove the last line item. The code worked fine until Acrobat 7.0.7 now I get an error that the index in the removeInstance method is invalid. After doing some debugging it appears that the node.length is not updating after a removal of an instance.
    For example, the form starts with 1 line item. (node.length = 2, index = 0)
    I can successfully add a new line item (node.length = 3, index = 1)
    I then can add another line item (node.length = 4, index = 2)
    I can successfully delete the last line item (index = 2) using the following code:
    var nodelength = form1.items.nodes.length;
    //need to know which instance is being removed
    if(nodelength>2){
    items.item.instanceManager.removeInstance(nodelength-2);
    else if(nodelength==2){
    form1.items.items.Status.rawValue = "";
    form1.items.items.guestName.rawValue = "";
    form1.items.items.Payment.rawValue = "";
    form1.items.items.Entree.rawValue = "";
    At this point the items.node.length property should be 3 but it remains 4 thus causing an error when running the above script again because there is no corresponding item to remove.
    This appears to be a bug - but if I am doing something wrong please let me know. If it is a bug, please fix it.

    This sounds like a bug I recently encountered. If it's the same thing then calling xfa.form.remerge() after the removeInstance() should correct the problem. If it is the same issue, it's already been logged in order to get it fixed.
    Chris
    Adobe Enterprise Developer Support

  • Thumbnails not updating after external editing.

    I noticed the thumbnails are not updating after I use an external editor. When I bring the images full screen are they are representing correctly, but when I leave full screen the thumbnail still is not the latest image.
    I tried the update preview and Aperture said it they are updated, so I did an option and update preview and that corrected them, but this should be happening automatically.
    I did try restarting Aperture before the doing the "option - update preview" and that had no effect.

    Do you mean it is suppose to be fixed in 3.0.1? Or do I have to wait until a 3.1 comes out.
    I am using 3.0.1 now and that is where I am seeing the issue.

  • Database history growth not updating after EHP upgrade

    Hi All,
    We are using SAP ECC 6.0 (731 - SP09 )  & DB2 Fix pack 5 version.Database history growth not updating after EHP upgrade. I have check  collector job running fin and DB tab > Configuration > Data Collection Framework > Configuration Collector are in green status.
    Please help me to resolve this issue.
    Regards,
    MK

    Hi MK,
    You can try few things:
    1. Check to collector standard job like SAP_COLLECTOR_FOR_PERFMONITOR should be running succesfully.
    2.If you can check to data collector collection interval column , you will find it to be Not Schedule.
    Try with Repair all collector.
    To make it work properly you have to perform
    Data Collection Full
    Data Collection Incremental
    Hope it helps
    BR Vaibhav

  • [svn:fx-i11] 5489: i11 branch: Fix SDK-20148 Group bounds do not update after moving a child UIComponent

    Revision: 5489
    Author: [email protected]
    Date: 2009-03-23 10:04:25 -0700 (Mon, 23 Mar 2009)
    Log Message:
    i11 branch: Fix SDK-20148 Group bounds do not update after moving a child UIComponent
    Fix: add a method in GroupBase that's called whenever child x,y changes in UIComponent. GroupBase invalidates layout when autoLayout is true.
    QE Notes: None
    Doc Notes: None
    Bugs: SDK-20148
    Reviewer: Deepa
    tests: checkintests, mustella
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-20148
    http://bugs.adobe.com/jira/browse/SDK-20148
    Modified Paths:
    flex/sdk/branches/i11/frameworks/projects/flex4/src/mx/components/baseClasses/GroupBase.a s
    flex/sdk/branches/i11/frameworks/projects/framework/src/mx/core/UIComponent.as

    FYI - This regression has been filed here: http://bugs.adobe.com/jira/browse/SDK-31989

  • Regisrty keys HKEY_CLASSES_ROOT\Photoshop.Application\CLSID and \CurVer are not updated after upgrading to cc 2014

    Regisrty keys HKEY_CLASSES_ROOT\Photoshop.Application\CLSID and \CurVer are not updated after upgrading to cc 2014
    this cause to "cant create ActiveX object" error in VB Scripts
    win7 x64, ps cc 2014 x64
    any ideas? thnks

    All I can so is show you what I see in that area of my Windows 7 registry but I have CS2, CS6 32, CS6 64,  CC 32, CC 64 and CC 2014 64 installed. 6 versions yet there seem to be 9 Photoshop Application dot keys.
    Windows Registry Editor Version 5.00
    [HKEY_CLASSES_ROOT\Photoshop.Application]
    @="Photoshop Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application\CLSID]
    @="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
    [HKEY_CLASSES_ROOT\Photoshop.Application\CurVer]
    @="Photoshop.Application.80"
    [HKEY_CLASSES_ROOT\Photoshop.Application.60]
    @="Photoshop Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.60\CLSID]
    @="{99aea70e-4d13-44bf-a878-33345cbfcbc8}"
    [HKEY_CLASSES_ROOT\Photoshop.Application.60.1]
    @="Photoshop CS6 Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.60.1\CLSID]
    @="{6DECC242-87EF-11cf-86B4-444553540000}"
    [HKEY_CLASSES_ROOT\Photoshop.Application.70]
    @="Photoshop Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.70\CLSID]
    @="{951ec38c-3de6-4bb8-8246-adf182e6421d}"
    [HKEY_CLASSES_ROOT\Photoshop.Application.70.1]
    @="Photoshop CC Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.70.1\CLSID]
    @="{6DECC242-87EF-11cf-86B4-444553540000}"
    [HKEY_CLASSES_ROOT\Photoshop.Application.80]
    @="Photoshop Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.80\CLSID]
    @="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
    [HKEY_CLASSES_ROOT\Photoshop.Application.80.1]
    @="Photoshop CC 2014 Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.80.1\CLSID]
    @="{6DECC242-87EF-11cf-86B4-444553540000}"
    [HKEY_CLASSES_ROOT\Photoshop.Application.9]
    @="Photoshop CS2 Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.9\CLSID]
    @="{16aa0b9e-79ac-43b5-86ca-ab961fbeed5f}"
    [HKEY_CLASSES_ROOT\Photoshop.Application.9.1]
    @="Photoshop CS2 Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.9.1\CLSID]
    @="{6DECC242-87EF-11cf-86B4-444553540000}"

Maybe you are looking for