Calendar on my 8310 shows wrong dates for November 2009

All of the calendar months are correct except November, 2009. Instead of starting on Sunday it starts on Saturday. Any clues on how to fix it?

My DVR manager show no dates at all on scheduled movies!
This was not the case before.
Can wsomebody confirm the same problem or is it only on my side?

Similar Messages

Calendar app showing wrong date for iCal feed.

Has anyone else noticed that when an iCal feed publishes an event that is after 0000Z, but still on the previous date in local time, it's added to the calendar on the wrong day?
Example: Your phone is being used in Chicago (CST). An ical feed you subscribe to publishes and event for 0300Z on November 5th. That event should then actually be on November 4th at 2100 CST, however, the phone will enter the event with the corrected time of 2100Z, however, won't correct the date which should be on the 4th (CST = GMT -6 hours).

I have my Mac's calendar auto-adjusting to time.apple.com. After coming back from Asia, now my calendar shows that November 11th, 2014 is a Wednesday; it is supposed to be Tuesday!

"Invoice History Report "show wrong balance for supplier invoice with USD

Invoice History Report show wrong balance for supplier invoice with USD Currency
After I run this report i see in the last of this report there is difference between the supplier total
USD (Currency ) and the open Balance USD , it is decreased the open balance
for supplier with 2300 USD with out any reasons
bellow is some data copy of the report
======================================================
Supplier Site Total: SAR 34,700.00
Supplier Site Total: USD 39,000.00
Supplier Total: SAR 34,700.00
Supplier Total: USD 39,000.00
Open Balance: SAR 34,700.00
Open Balance: USD 36,700.00
*** End of Report ***
==============================================
please advise me from where can this differenc ( 39000 - 36,700=2300 )COMMING
or it is bug in this report , becuase i compare this report with other report in account payable like
-supplier open balance letter
-invoice register report
-invoice aging report
all this report give me the amount for supplier USD =39000
BUT AGIN FROM WHERE THE SYSTEM DECREASED THE AMOUNT TO 36,700
thanks

Can you try running Create Accounting For payments just before you run the Invoice History Report and re-check .
Thanks

Calendar today doesn't show current date, it's now 23rd of Nov 01:03 in Beijing, but Today button of Calendar itself shows "today" as 22nd. So does the Calendar of Yosemite

Calendar "today" doesn't show current date, it's now 23rd of Nov 01:03 in Beijing, but Today button of Calendar itself shows "today" as 22nd. So does the Calendar of Yosemite.
Is it a bug?

Sorry for the huge chunk of code.
Mm, yes, I'm far too lazy to read all that.
But you should be overriding paintComponent(), not paint().
http://www.google.co.uk/search?hl=en&q=java+swing+painting&btnG=Google+Search&meta=
I've not bothered to work out from that pile of magic numbers exactly what you're tring to draw but is it not something that JTable would happily do?

Aggregate table showing wrong data

Hello Gurus:
I am working on an issue, where a report is showing wrong value for an aggregated fact table.
If I try not including it in query, then results work fine. But by default BI server is pointing to aggregate table ( which it should ).
So my questions are
1) Does Aggregate tables are refreshed automatically with DAC?
2) I know data is wrong in aggregate table. How do I verify?
3) How to make a particular report hit regular table instead of aggregate table?
Please let me know.
Thanks.
~Vinay

Alright. So I made some progress on this issue, HOWEVER it is still not solved.
1) Aggregated tables are refreshed daily with DAC. There is a script for that on server which is created using Aggregate Persistence wizard.
2) ONLY one column is showing wrong data. I have verified this using Toad. However I dont know why is it showing wrong data. Theoretically it should be fine.
3) this question is still same.
How to make a particular report hit regular table instead of aggregate table?
Please help me out.
Thanks.
~Vinay

Report showing wrong data

Hi Gurus,
When we are generating report in the answers in one column it is showing wrong data from where i have to start for this issue.
Thanks,
Rafi

Pull that column alone,run report, compare the results with your manual query, and also compare the physical query.
if all are good then try to add other column from any other dim and then do the same as above
repeat till you know the cause.
Pls mark if helps

LastDataRefresh(ROLLUPTIME)-does not show correct date for multiprovider

Hi,
The Last data refresh (Rolluptime) shows incorrect date for multiprovider and we use lot of multiproviders.
Removing the last data refresh from the "Information" button of the Bex Web Analyzer which is using the "Information field web item", shows an empty space and a colon ":" and an empty box.
Please let me know if there is any other way to remove the last data fresh without showing the empty space.
We are on SPS 7 and FEP 7. Is this problem still exist in SPS 8/FEP 8?
Thankyou,
-Sini
Message was edited by: Sini Kumar

Depends on your definition of correct. Your initial question was that this time does not display. This time should display. For a multprovider, it uses this formula
first(last(<All InfoProviders under Multi - ROLLUPTIME>))
It uses the earliest rollup time from the last rolluptime of all the base providers.

How to set the filter on a report to show the data for the Current Month

Hi all,
I am working on a report, which currently has this filter: Date First Worked is greater than or equal to 10/01/2010. This reports show the data for the current month, so at the beginning of each month we have to remember to change the date on the filter.
Does anyone know what the criteria should say, so that it automatically changes and shows the information for the current month, without us having to go in and change anything?
Any help would be greatly appreciated!
Thanks,
AA

You need to add a session variable to date fir worked assuming that this is a date field.
To do this open up the filter on the field then at then press add Variable then "session" and enter the following CURRENT_MONTH into the Server Variable section.

How to show specific data for user on redirected page once they logged in

I and fairly new, but have a general understanding of Dreamweaver. Using CS3 or CS4, how do you get the redirected page after the user logges in to show only the data for that user? I have creater the login page and it works fine but i dont know what needs to be on the redirected page for it to show only the data for the user that just logged in.
I am not very good with the coding part so if it requires it any help with that would also be helpful.
thank all.

I should be able to get the understanding if explained.
As for scripting i believe its PHP. at lease thats the page i created the login page with.
As for user-specific information: basiclly there account information.
As for database i have dreamweaver linked to a MySQL database. it pulls from 2) tables
1st table has the following: ID - User Names - Password - account number
2nd table has the following: ID - account number - names - address - ect
So basiclly i want when a user loges in for it to redirect them to a page which then only shows the data for that users. if i can link the data the pulls up by the account number that would be ideal
Thank you Murry

Time Series Graph Show Inappropriate Data for Continuous Analysis

Hi All,
I have marked Month as the Chronological Key in my BMM Layer but still I am unable to view the data correctly in my Time Series graph because it shows Inappropriate Data for Continuous Analysis at the time of creating the Graph. Can anybody help me out with the same.
Thanks

What data type is your key? The chronological key is required for the time series formulas (ago etc.).
The time series chart requires a date or datetime data type to work - perhaps a new column with the first of the month/period would help? Regards,
Robret

Invoice table sold to party show wrong data

Dear All
While creating excise invoice in background sold to party show wrong data.
In invoice ship-to-party andsold-to-party display correct but when we check
in J_1IEXCHDR table ship-to-party and sold-to-party display same data.
After upgrading support packs this problem came.
Regards
Pyneri

Hi
Refer this
Re: can anyone tell me in which table is sold-to-party name stored
Regards
N Ganesh

Printer shows wrong cartidge for my hp allin one

Printer shows wrong cartidge for my hp allin one printer.It was working 4 /5 days ago?if noone can help me is there a toll free number i canc all hp without having to pay for it,I posred this 4 times now and nobody has helped me,,,,,,,,I have windows vista and a DX series gateway computer about 7 nonths old now...Well i cant do anything with my printer now??????????

call 1-800-474-6836.

Date Picker Calendar Show Wrong Date Information Dec/Jan 2014-2015

When using a Date Picker, the offered Date for January 1st 2015 is a Friday! It supposed to be a Thursday!
You can move to February, and return to January again, and it will correct itself.
This happens in Office 2007 and 2010
What's gone wrong?
IT will also offer the wrong December dates.
Is there a fix please?

Re: Bad date
Some remote possibilities...
Your computer's clock has an incorrect date
The wrong year is entered somewhere as the first day in 2016 is a friday.
You have the wrong date system selected 1900 vs. 1904 or vice versa.
You have a 3rd party (non MS) Date Picker that is programmed incorrectly.
You have Office 2013 (nothing seems to work there)
There are alternatives and I offer one for Excel...
a free excel add-in date picker ("Get Your Own Date")
(no ads, no trackers, no cookies, no registration)
https://jumpshare.com/b/O5FC6LaBQ6U3UPXjOmX2
Jim Cone
Portland, Oregon USA

IPad shows "No Data" for Videos when I have movies stored.

Short version:
I've had lots of issues with downloading movies to my iPad from iTunes. When it works, the "videos" section under Settings > General > Usage shows "No data" as if it's not reading the storage. I'll have 6 movies but it shows nothing stored on the iPad.
Detailed version:
I'm on my 3rd or 4th try of "Erase all settings and content" without using an iCloud back up. My 3rd gen iPad will work fine for a month or more after that then start having tons of problems with downloading movies and performace. I'll set a movie to download from iTunes, go do something else and my iPad will become so slow its unusable. The downloads will fail but not alert me, they just restart and loop repeatedly. As of now it's working fine but my third party warranty is running out and I need to decide if somethings really wrong with it or is this an issue with iOS 7. I've taken it to the genius bar, the guy suggested I plug it into iTunes, download a fresh OS and start over again. Since then, its been largely fine. Only one movie failed and tried again then worked. The performance has been fine but I've been burned by this before...its fine for a while then goes to complete crap. I've also had the WIFI showing as connected but will not recieve any data until I simply restart and its fine. This has happened every time I've reset so its not isolated to one glitchy install.
I've asked for help before but no one has ever replied, if someone can give me a suggestion whether to tough it out or make a claim and pay $50 for a refurbished iPad that would be very helpful. If you need more details just ask, I've done all I can think of.

Bump - Can someone please help?

Team calendar My trainings not showing any DATA on Production Server

Dear ALL,
We are facing very critical issue on Production Server.
We have two Id's for which Team calendar, My trainings is not showing any DATA .
We observed that this is happening to both the users who had MSS role previously..
now for your information we have check the following things already .
1. RFC PT_ARQ_TEAMCALE_GET is showing DATA correctly .
2. The authorization. Is correct..
3. We got help from SAP..But not solved problem.
Here we copied same data in the Quality system and the Team calendar, My trainings working fine ..
I donu2019t know why Team calendar, My trainings is not showing any data in the Production system
Let me know ASAP.

Hi,
All r correct in both system .............even following things i have checked .................which i got from reply from U.
01.07.2009 - 11:29:52 UK - Reply by SAP
Hello Pinki
You need to check the settings in your different systems
the #group of organizational views# MSS_LTV_EE is maintained
for the Team Calendar and MSS_LEA_EE for the request mode.
Check the IMG step
Integration with Other mySAP.com Components ->
Business Packages/Functional Packages -> Object and Data Provider
-> Organizational Structure Views -> Group Organizational Structure vieMSS_LTV_EE (Team: Employee selection): the two organizational
views MSS_LTV_EE_ALL and MSS_LTV_EE_DIR are assigned.
MSS_LEA_EE (Leave Request: Employee Selection) the two
organizational views MSS_LEA_EE_ALL and MSS_LEA_EE_DIR are assigned
These organizational views are defined in IMG step #
#define Organizational Structure views#:
They have the following Object selections:
MSS_LTV_EE_ALL: MSS_LTV_EE_ALL (All Employees)
MSS_LTV_EE_DIR: MSS_LTV_EE_DIR (Team: Direct Reports)
MSS_LEA_EE_ALL: MSS_LEA_EE_ALL (All Employees)
MSS_LEA_EE_DIR: MSS_LEA_EE_DIR (Absence: Directly Subordinate Employees)Then you have to check the IMG step # Object
Also check these
Please use the evaluation path "ORGASS".
To change the evaluation path kindly go to the view V_TWPC_V , look for
the ESSDIR view and double click on the ESSDIR.
Please check the above customisation,
Tthe evaluation path SAP_MANG is used to determine
the root objects. "Eval.Path for Root Objects" on the detail
screen in the view V_TWPC_V "View Definition" for further information onthis topic).
Also check the customisation using
report RHSTRU00
In view V_TWPC_VG, the view group PTESS of view ESSDIR with position
01 should exist. Please correct it as well
and ensure that
In the View Cluster(T-Code SM34) VC_TWPC_ORGVWGRP there should be
a record for the group 'ATTEND'.
Hope this will help you.
Best Regards,
Siddharth Rajora
HCM
SAP LABS India

Calendar on my 8310 shows wrong dates for November 2009

Similar Messages

Maybe you are looking for