Calendar on PB differs from BB Torch

Hi,
Using the BB Torch and via BB-Bridge my Playbook I noticed that my Calendar in my PB is in 12 hour format while on my BB Torch it is in 24 hour format (which I like and want). I cannot find any setup at the PB where I can change this.
Anybody knows how to get my 24 hr calendar also at my PB?
(ps have all the latest software versions isntalled at both)
thanks,
marc
Solved!
Go to Solution.

OK sorry, post can be closed, just noticed in the KB that this issue is known and under development

Similar Messages

Factory calendar in project differs from plant factory calendar

Hi Experts,
When i enter the plant name in project definition and save it at once, am getting the following error message,
"Factory calendar in project differs from plant factory calendar
Message no. CJ707"
Its not allowing me to save the project at all. I am able to only cancel and come out of the project.
Please advise.
Thanks & Regards,
Kabir

Hi Nitin,
Thanks for your reply.
The Issue is solved. The PP guy had defined a customised calendar for the plant. Then i had matched it with the same in Project Profile.
Regards,
Kabir

BW calendar is different from ECC calendar

Hello,
I have discovered that BW calendar is different from ECC calendar.
For example , day Oct NN is assigned to week XX of BW calendar and week XX-1 of ECC calendar.
Is it a bug or normal case? How to allign BW calendar to ECC calendar?
Thanks

Try reimporting the calendars.
GO TO RSA1 >> Source Systems >> RIGHTCLICK on your Source systems >> TRNASFER THE CALENDARS >> Check the second option and press F8.
Please do close the question if you have got the answer or solved the issue.
regards,
Den

Can't transfer Calendar and contacts from my torch to the Z10

I have read a number of issues that people have posted regarding transferring contacts, calendar, and memos from a Torch to the Z10.
I am having the same issues. I was able to sync my media and email contacts, but the the others will not transfer.
Can anyone help.
Thanks

I had the same issues. Make a hotmail address. Sync the Torch with hotmail if it ossible. If not sync with Outlook from the Torch. Install the Hotmail sync software from MS for Outlook. now sync Outlook with hotmail.
Active the hotmail account on the Z10 and allow full sync options. It could take an hour fir the full sync to take place because it will do it with minimum data usage over time. I have over 1000 entries. Mine took over two hours to sync.
The advantage with this is you now have a cloud type backup of everything.
I did get reliable news that BB is supposed to come with an Outlook sync for the Z10 Link software. There is also some news of a possible new tablet coming this summer. The tablet one is more of rumor at this time.
Jerry G.

In calendar program the time in outlook is one hour different from time in iphone appointments

The time for all appointments in my outlook and synced to icloud are one hour different. I was in Mexico which at the time was one hour different from pacific time. How do I keep both times the same.

You might want to go to icloud.com from your computer, sign into your iCloud account, click on your name, then confirm that you have the correct time zone set for iCloud, and that on your phone in Settings>General>Date & Time that you have Set Automatically turned On.

How can I use different calendars associated with different emails to see appointments separately?

I have 3 emails accounts on my Blackberry curve. I want to use different calendars for different type of reminders/appointments. How can I do that? In calendar I pressed menu key and then clicked on select calendar, choose one email address (email 1) then entered an alarm but now if I go to a different calendar associated with different email ( email 2), it also shows me that alarm which I entered in email 1 calendar. Thanks for help

Don't have LV handy to open the old code, but I did read through the thread you referenced. It sounds like the example configured 2 counters to create the variable-freq finite pulse train and configured a 3rd counter to count the # steps generated as verification. That 3rd counter would be a problem for you as there is no internal timing signal connection between your 2 USB devices. You would need to run a physical wire connection and change some of the config code to match. Alternately, you could just delete all the code associated with the 3rd counter for now because it isn't strictly necessary.
Further advice/questions: Are you planning on a pure sine wave of frequency such that you oscillate with both positive and negative velocity (example: varying from -1000 to +1000 Hz clockwise)? Or is there a nominal average frequency with a small sine wave superimposed (example: nominal of 1000 Hz clockwise, variation of +/- 50 Hz)?
I *think* you may be dealing with more of a continuous pulsetrain situation, which is actually much simpler. You would only need 1 counter/timer, though you would still perform the freq changes in a timed loop which uses the pulsetrain as its timing source. You'd just need to keep track of your total elapsed time so you could figure out the right sinusoidal freq value at the moment you're ready to update it.
Another subtlety to watch out for if you're oscillating about 0 velocity -- don't try to create a frequency that is lower than the rate at which you need to update. Also, with steppers you may have mechanical stability issues at low freqs like 10's to low 100's of Hz. These kinds of things may need to be managed as special cases which force you to deviate from a "pure" sine wave.
-Kevin P.

Is there an email account that will allow me to use a different from address with a POP account

Need to be able to delete emails (I have an Optonline address) from iphone and ipad during the day, while retaining them on Mac Book Pro to view and file into folders in the evening.
Seemed like I could have my optonline emails forwarded to a Gmail account and just set up the Mac's mail to use my optonline account, while the iPad and iPhone used my Gmail account. That worked, except for one issue - when I sent mail from the iPad or iPhone it would use my Gmail address and then people who used "reply" would have their replies sent back to my Gmail account. I wanted to continue to use my optonline address since I have had this address for many, many years. I saw that Gmail allows you to "send using a different from address", however because optonline is a POP account, they do not support the settings in Gmail and therefore I cannot get my optonline address to be verified by Gmail, meaning my emails continued to be sent from my Gmail address on my iPhone.
I even tried setting up the Gmail account manually (using "Other" in the ipone settings) and putting in a comma with my optonline address in the address field, but still no success.
Next, thought I'd try Yahoo mail - same thing - only sends mail with my Yahoo account.
Then looked into iCloud since I use that for syncing Contacts and Calendars on all 3 devices - same thing - I can only send email using the @me.com address.
Does anyone know of any other mail account that will work with my POP Optonline email address? After 10+ years with this email address, having to announce to my world that I am changing my address (either to Gmail, Yahoo, or the iCloud's @me.com address) is something I really don't want to do.
However, leaving just my optonline account on all 3 devices means I am constantly deleting the same emails on 3 devices everyday, which is also just not an effective use of my time.
Please help!

Here's one possibility:
http://www.ideaflight.com
The only way to keep students in the presentation, though, would be to lock the iPads to that app via the Guided Access mode:
http://support.apple.com/kb/HT5509
Whether you can do this remotely through one of the various mobile device management (MDM) soutions I don't know.
Regards.

Can I print small calendars in iCal or from some other program?

I have a calendar in iCal that is used to keep track of my girlfriend's class and work schedule (which is wildly different from day to day). I would love to have this calendar on my iPhone but it must be in a different color like it is in iCal so that I can differentiate her schedule from my own easily. I thought a nice solution might be to simply print a small business card sized week view of her schedule and keep it in my wallet, however I can't seem to get ical to print a week view on anything smaller than an 8x10 sheet of paper.
It would be a great help to me if you could show me how to either sync to my iphone in a different color or print a small portable "cheat sheet" that I can carry with me...
By the way Apple, if you're reading this, how come we can't keep calendars that are separate in iCal separate in iPhone? Unless I am just being a dunce on this one, you should consider making this possible on the iPhone.

Ok it is a long one but it is possible to resize it without any external programs.
Only one calendar is synced to iPhone (ie one colour)
To print your calendar small:
Choose File/Print
Select everything you want on the calendar, don't worry about sizes yet and click Continue
In the print window, choose Paper Handling and select Scale to fit paper size
Choose the size you would like (business card?)
You can either print or Save to PDF

Print layout is different from the working view.

I got two calendars in iCal, marked with red and green. I always make the green ones as the first one on everyday and the red ones as the second. However, when I printed the scheduled month, some red ones were in the upper positions and it looked different from my screen.
How can I make all the green ones as the first event in the printed version.

You can make objects visible only on the screen by selecting Object => Presence => Visible (Screen Only). You can do the same for printing by selecting the Visible (Print Only) option.
Hope this helps,
Mike

Sending from a different (From:) address

While I am able to send email from my iPhone/iPad from an address different from my iCloud address, I don't see any way of doing it on my Mac (if I choose to use the web-client, instead of Mail). Am I right or is there something I have missed? Thanks for whatever help you are able to provide.

Welcome to the Apple Community.
There shouldn't be any reason you can't use additional email accounts alongside your iCloud account, I do.
Do you still have your alternate account set up on the iPhone, settings > Mail, Contacts, Calendars > Accounts.

PS CS5 Image Display Differs From Used ICC Profile In Win 7

Hi,
on my Windows 7 Ultimate x64 machine, I just calibrated my Dell SP2309W monitor using an i1DisplayPro and basICColor 5, creating a ICC v2 profile (I am aware of the problems under Windows with ICC v4 profiles).
It created the ICC profile and applied it to be used by Windows. I double checked under COLOR MANAGEMENT that the new ICC profile is being used. Although I can see that the new ICC is being used (desktop appearance changes), there are a few issues I am experiencing:
(1.) Windows Photo Viewer
The thumbnails in Windpows Explorer look fine (they DO use the new ICC profile), when I double click a jpeg and open the image it DOES NOT use the new ICC profile. When I click the PLAY SLIDESHOW button (starting the slideshow) in the opened image in Windows Photo Viewer, the images DO use the new ICC profile.
(2.) Internet Browsers
All current internet browser (Firefox, IE, Safari and Chrome) DO use the new ICC profile and display the image correctly.
(3.) Photoshop CS 5
When I open the same image - that Windows Photo Viewer does not correctly displays (according to the new ICC profile) - in Photoshop CS5, I get the same image display that Windows Photo Viewer gives me (when not thumbnail or not in slideshow mode) - it appears to be the sRGB display.
My color settings in PS CS5 are: North America General Purpose 2 > sRGB IEC 61966-2.1.
When I go to View > Proof Setup > Monitor RGB I get the image display using the new ICC profile.
Why does the image look different in PS than my calibrated monitor should output ?
I was under the impression (please correct me if I am wrong), that the sole purpose for calibrating my monitor was to get a uniform display across (ICC aware) applications. Even when one applies different color spaces to a document in PS, I thought the output on my calibrated screen done by the graphic card should always be according to my calibration and the settings in the ICC profile being used.
What Am I doing wrong or what am I misunderstanding ?
Any help or input is appreciated !
Thanks.
- M

Hello,
A note on monitor calibration: calibrating your monitor will not guarentee that every application will display color correctly, it's more of a step along the pipeline, and for the preview part of a color workflow it's the last step. Here's how color translation follows for an ICC workflow when previewing to a monitor:
Image Color Numbers > Document Tag or Workspace Profile > Monitor Profile
For non-color managed applications, if the original document is or isn't tagged with a color profile it will be translated directly to the monitor profile anyway. This is the equivalent in Photoshop of selecting "Monitor" in soft proofing. Selecting monitor in softproofing will bypass the tagged or workspace profile to translate colors directly through the monitor profile.
For most automatic color managed applications (like Firefox), the image will be translated through the tagged profile and then sent through the monitor profile. If the image is untagged or the profile is unrecognized, the colors get sent directly to the monitor profile.
For Photoshop, a tagged document will have its profile respected and then sent to the monitor. An untagged document will be assigned the workspace profile, which acts like a temporary document profile, and then gets sent to the monitor. This is often why users will notice Photoshop behaves differently from other applications. It's usually a case of the workspace coming into play. By default the workspace profile is set to sRGB. You can change this in Edit > Color Settings.
The purpose of the workspace is originally for printing workflows, as a way of keeping consistant color translations when dealing with both tagged and untagged documents. For web output workflows it can be useful for viewing everything through sRGB, which is typical of the average monitor output (not so with newer wide-gamut monitors, another source of confusion...) combined with the fact that originally most web browsers were not color managed. Hence viewing everything through sRGB is pretty close to what most monitors see and what untagged/unmanaged docs will look like.
Monitor calibration is useful only because it brings your monitor output to a "known state". In traditional workflows the monitor was always a middle-man, a preview device which was useful for getting an idea of what the printed output would look like before you print it. Since print colorspaces are often smaller than display spaces, it's feasible and useful to narrow down the monitor/display space and calibrate it to a known state, so that even if it doesn't totally match the print, you'll get used to its differences/limitations and they'll be consistent so long as the calibration is maintained.
For web output, your final output is often another user's computer monitor, which can have any form of behavior (most standard monitors are pretty close to sRGB, or use sRGB as an operating system workspace (default monitor profile). Wide gamuts behave differently, but I'm not sure if there's a particular ICC space that they closely match, or if different wide-gamuts are even that close to each other in their display color spaces.
Hope this helps!

Quantity is different from sale order and delivery

Hi,
Gurus,
Quantity is different from sale order and delivery.
I identified the Material in the sales order, the item category for this material as BOM.
I have also checked the bill of material display header overview. The Base Quantity maintained as 1000 EA3. The SUBITEM maintained in G in the unit field in bill of material display.
Accordingly i have checked the same for material master's additionl data in Units of Measure tab, it is mentioned the basic unit as 1000 EA3 and alternative unit as 600 G.
My client processed the order for 100 QTY. The QTY for the two sub item is 99.601 each in the sale order.
My client Question is why in delivery the Material Qty is coming as 99.730 and the SUB ITEM is coming as 99.330 EACH.
Note:- The material X is maintained in EA3 in Bill of material header overview. I do no how the sale unit came as G for the Material in sale order.
The other two sub item is perfectly coming as G. Because it is maintained in G in the Bill of Material Display.
Guide me GURUS.
Thanks and Regards,
ANAND

Hello Rumar
I guess you entered the text manually in the sales order. The Ship-to may not be having any text, but the Sold-to may be and it may be coming from sold to.
In transaction VOTXN, check the access sequence for the text type id and see which one takes precedence - one from customer master or from the order by checking the order of accesses.

ALV GRID - Handling selected rows? Sorting in OUTTAB is different from ALV

Dear Experts ,
I have a transaction with ALV grid. I have defined several application specific functions to the ALV grid tool bar. My requirement is to handle the ALV tool bar functions only for the selected rows.
Code snippet:
DATA:
LS_GRID_DS TYPE TYS_DS.
TYPES: BEGIN OF TYS_DS.
INCLUDE   TYPE TYS_ALVGRID.
TYPES: STRUCNAME LIKE DD02L-TABNAME.
TYPES: PRETAB    TYPE ZTAB_T,
       OUTTAB    TYPE ZTAB_T,
       OUTTAB_HIDDEN TYPE ZTAB_T,
       OUTTAB_SUM TYPE ZTAB_T,
       OUTTAB_ROLLBACK TYPE ZTAB_T,
       END OF TYS_DS.
LOOP AT ls_grid_ds-marked_rows INTO ss_index_split
       WHERE rowtype IS INITIAL.
( Marked rows is correctly giving the row numbers of the highlighted rows)
READ TABLE ls_grid_ds-outtab INTO ss_sel_rows_ds_split
               INDEX ss_index_split-index.
ISSUE : Sorting in ls_grid_ds-outtab internal table is different from ALV Grid display.
Hence, though ls_grid_ds-marked_rows giving correct rows, I am not able to handle the my requirement correctly.
Why sorting in gs_grid_ds-outtab is different from ALV display? How can they made in sync?
Thank you in Advance.
Sravan.
Edited by: Raja Sravan on Jan 16, 2009 1:13 AM

Hello Raja
The OUTTAB is usually in sync with the display on the frontend grid control because it is a CHANGING parameter (of method SET_TABLE_FOR_FIRST_DISPLAY).
Question: Do you "feed" ls_grid_ds-outtab to the parameter IT_OUTTAB of method SET_TABLE_FOR_FIRST_DISPLAY?
If not then it is obvious why you get discrepancies.
Regards
Uwe

Report for PO with prices different from info record

Hi All,
Is there a std report in SAP that can view the PO with prices that varies from the Purch Info Rec price?
User want to find out who put POs with prices different from prices already set in purch info recs.
How this can be achieved?
Thanks in advance!

hi,
There is no std report for the same....but you can see the PO price history from ME1P tcode....and price change in MMR can see from :
CKMPCD Display Price Change Document
CKMPCSEARCH Price Change Documents for Material...
you can't see excatly who changed it ......its always better to avoid these situations by using Authorization for the same...
Hope it helps....
Regards
Priyanka.P

Multi gesture for browsers different from safari

Multi gesture for browsers different from safari, for example right to left scroll to previous page. How to set it like in Snow Leopard?

THe only gesture to change tabs is to tap the tab in the address bar. You can go back a page in a website by holding one finger on the left side of the screen and swiping right. You can go back to a previous app by placing four fingers on the right side of the screen and swiping left.

Calendar on PB differs from BB Torch

Similar Messages

Maybe you are looking for