Calendar posted via Iweb won't update initial view to current month

I have a calendar which updates automatically onto a page I have created with Iweb. Although the events update fine to the site, the view on the page is always May of 09 and I have to click forward to get to the current month. Is there a way to set it up to always show the current month?

Hello Snagglebits2
I am an Solutions Engineer for a hosted exchange provider, and that is some good information.
I have not tested this out, but i will. I do remember when i had my ipod touch, that it would sync perfectly over WiFi, but i do not know if i ever tested this by USB.
You should also make sure your customer is on a hosted exchange service that uses Akami.

Similar Messages

IWeb won't update an already published page

Hi, Maddening but I've made minor changes to a page in iWeb and it simple will not display in Safari as updated. I've cleared the Safari cache and reloaded the page. So I'm thinking it's safe to suppose it's not a cache issue.
I've tried publishing the revised page alone and have tried publishing all page again.
My wild guess is that the file is failing to overwrite the old file and instead is renaming itself as another version of the original.
Fixes?
Many thanks

HELP. I'm publishing and ftp'g but only 2 of my three photo pages are being published (my Site folder doesn't show the html of the page in question and the photos are not being published in the folder).
See: http://natterjacktoad.com/Photos/Site/index.html
This is the page/link in question: http://natterjacktoad.com/Photos/Site/Vintage.070203.html
Mike
[email protected]

Calendar on iphone 4 won't update ical on mac

When I sync my iphone with macbook, all new ical entries from my laptop update on my iphone but new iphone entries don't update on macbook.

Erm ... such as? I'm a bit clueless as I've never had a problem with my iPhone, so not sure what to do!

My atv won't update to the most current firmware.

So I turned on my apple tv (2nd gen) today for the first time in a couple months and it said that there was a software update available to install. After trying to install and download it multiple times it still won't let me. I keep getting the error message "the update wasn't successful." I don't know really what to do. My Internet has been acting up a little bit lately but I would think that I would still be able to be able to download and install it after a few different tries. Thanks

Welcome to the Apple Community.
There are issues with the update servers at the moment, I can only suggest you keep trying.

2nd generation iTouch won't update to iOS 4. currently running 3.1.3

Help, I want to update my older iTouch for my kids to play on (and leave my iPhone alone), but most of the games in the app store require iOS 4+ and when I sync with iTunes, it tells me that I am running the most up-to-date verson. Is this true?

That sounds like it is a 1st generation iPod. Does it have external volume controls? If no, it is a first gen, and can not be upgraded beyond iOS 3.1.3.

Won't update, can't download "current" repo list

[max@pwn ~]$ sudo pacman -Syu
:: Synchronizing package databases...
error: failed to synchronize current:
extra 314.8K 350.7K/s 00:00:01 [#####################] 100%
community is up to date
:: Starting full system upgrade...
warning: dvd+rw-tools: forcing upgrade to version 7.0-3
resolving dependencies... done.
looking for inter-conflicts... done.
Targets: gcc-libs-4.2.1-1 aspell-0.60.5-2 bluez-libs-3.19-1 bluez-utils-3.19-1 cairomm-1.4.4-1 cdrdao-1.2.2-2 codecs-20061203-1.1
curl-7.17.0-1 db-4.5.20-2 dvd+rw-tools-7.0-3 fam-2.7.0-10 pcre-7.3-2 glib2-2.14.1-1 libdatrie-0.1.2-1.1 libthai-0.1.9-1
pango-1.18.2-1 gcc-4.2.1-4 libidl2-0.8.9-1 firefox-2.0.0.7-1 galculator-1.3-1 gettext-0.16.1-2 opencdk-0.6.4-1 libtasn1-1.1-1
gnutls-2.0.0-2 groff-1.19.2-2 libstdc++5-3.3.6-2 libxml2-2.6.30-1 libxslt-1.1.22-1 lirc-utils-0.8.2-1 mplayer-1.0rc1-8 neon-0.27.0-1
ntfs-3g-1.913-1 orbit2-2.14.9-1 subversion-1.4.4-3 unshield-0.5-5 xorg-xinit-1.0.7-1
Total Package Size: 53.38 MB
Proceed with installation? [Y/n]
:: Retrieving packages from current...
warning: failed to retrieve some files from current
error: failed to commit transaction (unexpected error)
[max@pwn ~]$
It's broke! What should I do?

Hi synthead,
see this http://www.archlinux.org/news/345/
You must change current repository with core
Last edited by luca (2007-09-23 12:08:20)

Calendar won't update

Help!
The calendar on my iPod won't update when I connect my iPod photo 40 gig to my powerbook G4.

Do you have your calendar Syncing enabled?
Navigate to: iTunes>Preferences>iPod>Calendars>place a check in front of "Synchronize iCal Calendars and select either Synchronize all calendars or synchronize selected calendars only.
Hope this helps!

IPod just won't update!

Hi,
I bought another iPod video today (after the first broke!) and just like that one, it won't update! It's currently running "Version 1.2" and whenever I load up iTunes, it tells me there is an update available, but when I click to update it takes a few minutes and reports that it couldn't update becuase no iPod is connected, and suddenly it disappears from the "Devices" list in iTunes. I thought maybe it was my computer- but it does this on all of mine (all running Windows XP) and I have iTunes 7.2.. is there any know soloution?
Thanks,
Henry

I have another question along the same lines: my GF just got a new 2G 4GB Red Nano for Christmas. I've been trying to update it and have had no luck. It is Windows formatted and I have been attempting to use it on a Windows XP machine. I have tried every single USB port (there are 8) and two different cords, but with no luck.
Every time I connect the Nano (and I've been unable to add music to it at this point) iTunes 7.0.2 says that there is a new update for my iPod (v.1.1.2). I click update, it makes the appropriate lights, the nano goes to reset itself and comes up again, like nothing ever happened.
As per your post above, I have tried attaching this to my MacBook Pro running current OS X and the same thing happens. It seems as if the Nano just resets itself in an endless loop without ever taking the update.
Any suggestions?

Syncing hosted exchange calendar to iPod Touch over USB won't update-

Wanted to post some helpful advice for anyone that may experience this issue.
If you use a hosted exchange service, and are stuck syncing your calendars and contacts to an ipod touch or iphone over USB, realize that iTunes will only sync the default calendars and contacts over USB, not shared folders. Itunes will give you the option to designate which calendar syncs, but the names in iTunes won't match what is named in outlook.
Have a difficult client who suffers from a mixture of tech hoarding, non-linear thinking, unwillingness to change behavior, tech anxiety, and ego. So there has been a lot of money and time spent to get him tools that help organize his life, and allow me to schedule things for him. I have him on a hosted exchange account so that I can have access to his most up to date appointments and contacts when he travels internationally (He won't leave AOL because he can save emails directly as Word files). His Palm treo (which was only being used as a PDA) was beginning to fail, so I recommended an iPod touch as a temporary, low-cost PDA alternative. He travels internationally in 6-8 month chunks, since it didn't make sense to commit to a superphone. He did it under condition that it would sync over USB, since he is in areas without wifi very often. I checked it on my iphone (since I'm synced to his exchange account), and it worked. So I gave the go ahead.
After some issues with changing out his computers while in Europe, he contacts me with issues that his calendar and contact options were not updating to the most recent information in outlook after syncing with USB. After a support call, I was told to restore the phone, so that everything was erased and would be reloaded with outlook info. After we did that, my client informed me that contacts were updating, but the calendar was missing, except for two events that I had accidently added to it from my iPhone. I called support, who took the issue to tier 2, and was outright told not to talk to me and referred me to my hosted exchange company. I mentioned that they would be unable to help me with why iTunes wasn't updating a calendar in Outlook. He apologized but said that Tier 2 wouldn't take the call, and because it was exchange they wouldn't help. This was with my client on the line in a skype conference, who became maddeningly upset, as he would need to find another PDA while in Europe. Since, my client has sworn off Apple, which I was beginning to lean him towards, due to it's robust OS and backup capabilities, as well as simplicity.
But that's neither here nor there. I noticed that the two events that I had accidently added were on the default outlook calendar, named (oddly enough) "Calendar". Due to issues with me when I setup exchange when we first got it, I had to tell him to use a shared calendar called "Calendar-New" so that him and I could view and edit his appointments from different machines. I was connected to my clients computer over VNC, so I saw that under the info tab in iTunes, where I had checked "Sync with outlook" that there was a second option to sync only certain calendars, and three were listed, ""Calendar", "Calendar-", and "Calendar-1". I asked the tier 1 rep to check to see what these meant, I may be able to redirect iTunes to the right calendar. He was unwilling to, as Tier 2 had yelled at him.
With that, we hung up, and, once I confirmed that his changes to Calendar could be seen on my end, and changes I made could be seen on his end, and that these events showed up on the ipod after he synced it, I realized that iTunes defaults to the default calendar in outlook. Yay!. I went ahead and dragged and dropped all of the events from Calendar-New to Calendar, and now the problem is fixed.
I really wish someone at apple support would have been willing to at least walk through this with me, or at least looked into how the sync works, Ashley in tier 2, shame on you for hanging up on my tier 1 rep! You lost a customer who buys a brand new computer every year. Reminds me of this story
http://www.crm-daily.com/story.xhtml?story_id=74372

Hello Snagglebits2
I am an Solutions Engineer for a hosted exchange provider, and that is some good information.
I have not tested this out, but i will. I do remember when i had my ipod touch, that it would sync perfectly over WiFi, but i do not know if i ever tested this by USB.
You should also make sure your customer is on a hosted exchange service that uses Akami.

ICal won't update published calendar

I have a published calendar on .Mac and when I update in iCal, it won't update on my .Mac account. Also it shows that the published date is Dec 31, 1969. I have checked my date and time on system preferences. I have deleted and recreated this calendar, and it has not solved the problem. I have even unpublished and published several times, all to no avail. I have iCal 2.0.2 installed. Anyonw else come across this problem?
Thanks.

When you publish, is "Publish changes automatically" checked? This would explain why updates don't happen. Also in .Mac system preferences under the "Sync" tab, there is a choice of how often to sync. Even if this is set to "Automatically" the sync isn't instant. Check this setting. I don't know if it affects published calendars or not, but worth checking nonetheless.
I wonder if in the Date and Time system preference ("Date & Time" tab) you have "Set date & time automatically" Checked?
Mine publish fine, no problem: http://ical.mac.com/dancingbrook/Social
Still no solution for web To Dos though perhaps via a webDAV server? Try:
http://www.icalx.com/
Also, can I assume you've tried trashing your ical preferences? ~/Library/Preerences/com.apple.iCal.plist

IWeb won't start after update

Hey!
I just ran a bunch of system updates and now iWeb won't start. I reinstalled iLife'06 from the DVD and rebooted, but no luck. I have also repaired permissions and rebooted. I just get one bounce in the Dock and this message in the iWeb.crash.log:
Host Name: Garry-Computer.local
Date/Time: 2006-03-30 04:09:56 -0500
OS Version: 10.3.9 (Build 7W98)
Report Version: 2
Command: iWeb
Path: /Applications/iWeb.app/Contents/MacOS/iWeb
Version: ??? (???)
PID: 478
Thread: Unknown
Link (dyld) error:
dyld: /Applications/iWeb.app/Contents/MacOS/iWeb can't open library: @executable_path/../Frameworks/SFAnimation.framework/SFAnimation (No such file or directory, errno = 2)
iMac Mac OS X (10.3.9) G4

Sounds like something major is missing from iWeb or from the iLife install.
If you didn't delete iWeb and the install package receipts from your computer before reinstalling iLife, iWeb would have only been updated. If it was corrupted before the update, the problem would not have been fixed by a reinstall.
Backup your domain file before doing anything else! It's in username/Library/Application Support/iWeb. Put a copy in a safe place.
Then try deleting everything to do with iWeb from your computer, going to drivename/Library/Receipts and deleting all the iWeb package receipts, empty the trash.
Reinstall iWeb.
Michael
Quicksilver G4 Dual 1GHz Mac OS X (10.4.5) http://www.rowan-cottage.co.uk

Calendar sync via cable doesn't work with now I've updated to Maverick and ios7

Calendar sync via cable doesn't work now I've updated to Maverick and ios7.

I am sorry you are having this trouble.
Here is an article on troubleshooting calendar syncing with iCloud. See if the suggestions there are of help.
http://support.apple.com/kb/TS3999

Updating .Mac website via Iweb

I have been creating a web site via Iweb. I plan on publishing it to my .Mac account in the next day or so. The site is of our newborn and I plan on updating it with photos often (once a week). I have been reading the chats and find that when I update the site it (iweb) will re-upload everything (thus causing me to go over the 1GB limit). Is there a quick fix or an easy workaround?
All I will be changing on the site (on a regular basis...for now) will be new photos. I will want to remove the old ones and replace with the newer ones.
Mac Mini & Windows XP Mac OS X (10.4.4) in the process of making the FULL switch from PC to MAC

Nathan
Also be aware that iWeb resizes your photos, so it will take quite a while for you to hit 1GB. If my memory serves me correctly it resizes everything to a max of 800*600 pixels, creating files of >100kb (looking at my own files).
I have a couple of hundred photos on my site and I have used less than 60MB of my 1GB, loads of space left.
You could even add a new page each week
Will

Using Elements to create slideshow to post online via iweb....

Is this possible??? I am almost at my wits end trying to figure out a way to create a slideshow to post on my site via iweb that looks decent. iweb does have a slideshow it is only enabled IF the viewer wants to enable it. One other thing that I have tried is uploading to other sites and copying the html and putting it in a widget. This works great but looks terrible. Is there another way or does anyone have any other options? Thanks so much!!!!

How are you hosting your site, and which slideshow are you trying to do? Which version of elements?
If you mean the html slideshow in earlier versions of elements, you would need to upload that to a separate folder on your website and just link to it (you'll have to edit the html of the completed slideshow to give your visitors a way back to the main site). That's about as much as you can do.
I'd suggest looking into something like rapidweaver rather than beating your head against the wall trying to make this work, or using a photo hosting site and linking to the pics from your iweb page.

Can't auto play music post iweb 1.1 update

Hello,
I have just updated to iweb 1.1. On the previous version I was able to publish and edit the html source using Taco HTML Edit to auto play Quicktime music attachment but with the 1.1 update I can't seem to find the source code for the music attachment. Please look at the source for this page:
http://web.mac.com/dilation/iWeb/Site/Foundation.html
there definitely is music attachment but can't see it from the source. And for some reason I need to right click the play button to play rather then left.
Does anyone know how I can make the music to autoplay post iweb 1.1 update?
iMac Mac OS X (10.4.6)

The recent update to iWeb now places QuickTime content in a javascript file. Yours is:
http://web.mac.com/dilation/iWeb/Site/Foundation_files/Foundation.js
And the music file is:
4-11%20Piano%20Sonata%20No.13%20in%20E%20flat%20major,%20Op.27_1%20III.%20Adagio %20con%20espressione.m4a
It includes many spaces and some punctuation that could cause issues with playback on some machines.

Calendar posted via Iweb won't update initial view to current month

Similar Messages

Maybe you are looking for