Calendar selection not the same as in iCal ?

In Calendar I want show/hide my calendars like in iCal but I can only select either one of them or ALL.
This is not nice especially with Weeknumber, showing an event every day if I select ALL.
I want to optionally enable the Weeknumbers view. Can this be done or do I have to submit an enhancement request ?

I have to look at this but I think this updated both id and ic, and now I'll tell him
thnks Bob

Similar Messages

Calendar colors not the same...

In iCal, I have four different calendars each with their own color: blue, green, red, and orange. The calendar colors on the iPhone are all scrambled. How do I fix this? What am I missing? Thanks!

After playing around for some time and reading many blogs and posts with suggestions, I tried MobileMe as well.
It did not solve the color problem for me and on top of that if gave me a new problem with not syncing ical subscriptions.
The problems are so massive and wide spread that Apple has to fix them, and I'm pretty confident they will. We will probably see a round of updates and all of a sudden it will work like we all expect from a premium product like the iPhone and MobileMe.
The disappointing part is that Apple gave us a service which has a bunch of little problems and is basically not quite ready yet. And I bet that's exactly what it is, they simply ran out of time and had to push a product into the marked, before they were quite finished with it.
This is disappointing but not uncommon with everything computer. However, they should keep us informed so that we can stop guessing! "Sorry folks, we have a bunch of problems here. We will subsequently fix them over the next couple of weeks and we apologize for the inconvenience!" This is the least I would expect as a loyal customer.

Matrix editor: make selected notes the same length broken?

I used to select a group of notes in matrix editor, then drag one of those with SHIFT+ALT to make them all the same length.
This appears as broken in LPX (10.0.6), as the behaviour is inconsistent: sometimes it works as expected (as in LP9), other times it just de-selects the clicked note.
This looks like a bug to me... Any ideas?

hi Eriksimon
thanks that actually helped!
However, ALT+SHIFT is not SHIFT so I struggle to understand why they changed the behavior from LP9 breaking users' gesture memory to no apparent advantage.

Synced times in ical between iphone and Macbook not the same

I have tried syncing my ical to my iphone using itunes and the times on my iphone are not the same as my ical. for example 1.30 pm for an appointment in my ical reads as 4.00am and the next day on my iphone calendar. How do I fix this?

Are both the iPhone and your Mac set to the same (local) time zone? Do you have Time Zone support turned on in iCal Preferences and in iPhone > Settings > Mail, Contacts, Calendar?

Why are my iCal events not the same across views?

Help! I've been editing my iCal in Month view and everything looks great... but then I look at the day view (or week, whatever) and it's not the same. For example, in Month view for July 2 - I have one event scheduled from 8:30-noon. Then I look at the day view... and there are 8 different events! Most of them duplicates of different things that I had at one time or another deleted or changed. Why didn't the "clean up" work that I did in the month view carry over to day or week view? In fact the opposite, there are more things in day or week views than I ever created.
Recently upgraded to Lion from Snow Leopard. Recently changed from mobileme to iCloud. I only have iCal set to my iCloud account (no "on my mac" iCal calendar data). So the problem I see when editing on my MacBookPro is also seen when logged into iCloud directly via Safari and on my iPhone, iPad, etc. At first I thought this was an iCloud syncing error because I only noticed the difference on my phone (list view)... but when I went back to my MacBookPro I realized the problem exists there too... so doesn't seem to be a syncing error, but rather a "view" error... then the "problem" is mirrored everywhere.
I've tried "refresh" and "refresh all" from the Calendar drop down menu. This does nothing to help the problem... not that I really expected it would.
Thanks for any help you can provide. I'm going crazy!
Mac OS X 10.7.4; iCal 5.0.3

Fixed my own problem. Ultamately a user error but tied to the many threads about the month view defaulting events to "all day" vs. hourly increment. I knew that was the case, so when editing events from month view I made sure to add/change the time, but negected to look at "To" date. If my event was for an hour, simply adding the hour pushed the day to span across dates so the event was really 25 hours. Looked OK in the month view (just showed as a dot) but the day and week were all filled and casued the event to appear twice on the second day in list view (iPhone). In the case of repeat events, sometimes "To" date ended up as the end date for the repeat cycle... which really messed every thing up... I believe causing what looked like duplicates, etc.

Is there a way to repeat an activity in the calendar monthly on the same day, i.e., the 2nd Wednesday of each month? I can repeat on the date but not the day of the month.

Is there a way to repeat an activity in the calendar monthly on the same day, i.e., the 2nd Wednesday of each month? ( I can repeat on the date but not the day of the month.)

Not with the stock calendars app.

I have 10.7.3 lion on my computers an iMac and a macbook pro plus a new iPod touch, and two older touches, now trying to sync my calendars is not working deletes some events, duplicates others, I want all my calendars to be the same. Any ideas

I have 10.7.3 lion on my computers an iMac and a macbook pro plus a new iPod touch, and two older touches, now trying to sync my calendars is not working deletes some events, duplicates others, I want all my calendars to be the same. Any ideas

Have you tried resetting the SMC ? > Resetting the System Management Controller (SMC)

Write a SELECT statement in different ways is not the same thing!!!

Let's take a look
use AdventureWorks2012
go
dbcc freeproccache
go
and now select something
select * from [HumanResources].[vEmployeeDepartmentHistory]
go
so, analyzing 'Compiled Plan'
SELECT usecounts, cacheobjtype, objtype, text
FROM Sys.dm_exec_cached_plans
CROSS APPLY sys.dm_exec_sql_text(plan_handle)
where cacheobjtype = 'Compiled Plan'
ORDER BY usecounts DESC;
GO
and now let's write some SELECT in "fuzzy case"
dbcc freeproccache
go
select * from [HUMANResources].[vEmployeeDepartmentHistory]
go
select * from [HumanRESOURCES].[vEmployeeDepartmentHistory]
go
select * from [HumanResources].[VEmployeeDepartmentHistory]
go
select * from [HumanResources].[vEmployeeDEPARTMENTHistory]
go
select * from [HumanResources].[vEmployeeDepartmentHISTORY]
go
SELECT * from [HumanResources].[vEmployeeDepartmentHistory]
go
select * FROM [HumanResources].[vEmployeeDepartmentHistory]
go
and now let's see compiled plans again
SELECT usecounts, cacheobjtype, objtype, text
FROM Sys.dm_exec_cached_plans
CROSS APPLY sys.dm_exec_sql_text(plan_handle)
where cacheobjtype = 'Compiled Plan'
ORDER BY usecounts DESC;
GO
So, write a SELECT statement in different ways is not the same thing!!!
Hope it'll be useful
P.Ceglie

Yes. There is little or no query normalization that happens in front of the query plan cache. It would be a performance tradeoff to parse and normalize the query before matching it to the cached plans. The benefit of reducing the number
of plans in the cache probably wouldn't be worth it.
David
David http://blogs.msdn.com/b/dbrowne/

Some programs do not run: update software, mac App Store, Calendar, ibooks.V the same time, the program iTunes, iPhoto and other work normally. What to do?

Some programs do not run: update software, mac App Store, Calendar, ibooks.V the same time, the program iTunes, iPhoto and other work normally. What to do?

Hello JohnnyChin95,
You absolutely can just reinstall OS X Mavericks without having to erase and install. The steps to do that are almost the same as the only thing you do differently is that you do not go to Disk Utility to erase the drive. Just go to the Reinstall OS X option and pick your Hard Drive and follow the on screen instructions to get it going. Check out the article below for the step by step process.
OS X Mavericks: Reinstall OS X
http://support.apple.com/kb/PH13871
Regards,
-Norm G.

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.

My UI is not the same as that shown in the Mozilla website..why? (i.e home button still on left hand side of screen and no bookmark icon)

I was using FF 4 Beta and applied the update ... I noticed that my final version was not the same as shown on the website so I removed the beta setup file and took off all versions of FF cleaned adn restarted my laptop and then reinstalled a clean version of FF 4.. however my final* version is not the same as shown still. Is this right or do I need to do something else :(
Examples of what is different is the home icon remains on the left hand side of the screen next to the back button and I do not have the bookmarks icons which from the website should appear on the right hand side next to the new location of the home button.

Look you can customize it very easily.
Press Alt+V to have the View Menu -> Select Toolbars -> Click on Customize -> Now drag the Home Button to anywhere on the toolbar and pick the Bookmarks Button from the available icons and put it in the toolbar.

HT1267 The Apple ID in my new IPhone is not the same as my ID . how can i sort this

Hi, The Users ID on My New IPhone Is not the same as my apple ID
How can I sort this ...

Got it!!!! A re-install is NOT the answer. You need to turn on individual notifications under Settings > Facebook > Push Notifications, BUT (and this is a big and confusing BUT) you also need to turn on global push settings under Settings > Mail, Contacts, Calendards > Fetch New Data (and change the Push slider to 'on'). This doesn't sound like it makes sense, but I guess that the push slider under 'Mail, Contacts, Calendars' is actually for ALL push notifications on iPhone, and not just Mail, Contacts and Calendar apps!

Windows Firewall issue, Inbound rule opend all, still not the same as turning off

This is Windows Firewall issue on Windows 8.1 Pro.
Backup Exec server cannot expand a computer node in selection list. I drill down to Microsoft Windows Network/Domain/Computers, then when I tried to expand a Windows 8.1 Pro computer node, it hangs out.
I narrowed this problem to Windows firewall related issue on Windows 8.1 Pro computer.
When I turn off Windows Firewall on Domain profile, Backup Exec Selection expands the computer node of the Windows 8.1 Pro computer. So, I created an inbound rule opening all to BAckup Exec server as following, but it's still not the same as turning off
Windows firewall specifically on Windows 8.1 Pro computer;
Any Local IP address, Any Remote IP address, Any port, Any protocol, All Interface, All Programs and Services, All profiles(Domain, Private, Public)
And there are no rules blocking any which may override the above rule.
Ethernet on Windows 8.1 Pro computer shows profile is linked with Domain, but just to make it work, I selected all profiles.
Even though I opened all available in inbound rule, it's still not the same as turning off windows firewall. Why am I missing?

It looks as something related to RPC(UDP 135), but even when inbound rule is all open, why it matters? RPC seems working fine only when firewall is turned off on domain profile.
Protocol 17 is UDP
Port: 135
===============================
Event ID 5152
The Windows Filtering Platform has blocked a packet.
Application Information:
Process ID:
0
Application Name:
Network Information:
Direction:
Outbound
Source Address:
192.168.1.120
Source Port:
0
Destination Address:
192.168.1.11
Destination Port:
0
Protocol:
1
Filter Information:
Filter Run-Time ID:
245836
Layer Name:
ICMP Error
Layer Run-Time ID:
32
The Windows Filtering Platform has blocked a packet.
Application Information:
Process ID:
0
Application Name:
Network Information:
Direction:
Inbound
Source Address:
192.168.1.11
Source Port:
35341
Destination Address:
192.168.1.120
Destination Port:
135
Protocol:
17
Filter Information:
Filter Run-Time ID:
245834
Layer Name:
Transport
Layer Run-Time ID:
13

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every time.

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every day. Help?

Hi Gary...
I see you are running v10.4.11 and you have updated Safari but make certain all the system software is up to date by clicking your Apple menu / Software Update.
If everything is up to date, try resetting Safari from the menu bar.
Select the top 7 buttons, click Reset.
Restart your Mac. Launch Safari. Try several of the sites you mentioned.
has started quitting
If resetting didn't help, post a crash report.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

Print output not the same

Hello.
I have a puzzle that I cannot seem to find a solution for.
When trying to print a PDF, one output is not the same as the other; let me explain.
- Open PDF > File > Print > Make sure "Fit to page" is selected > Print = Printout looking good.
However...
- Highlight PDF > Right click > Print = Document is not shrinked to fit, and I lose part of my PDF.
Is there a fix for this?
Using either Acrobat Standard 8 (to the latest update) or Adobe Reader 9 (to the latest update).
Thanks for any input, advice.

Ok, I can see from my first post that the question is not clear.
There are 2 ways to print a PDF document.
Option 1
Opening the PDF, going to File > Print or clicking on the Printer icon.
From there you get the print dialog and you select printer, properties, etc, etc, etc...
This one works fine.
Option 2
By going to the folder where the PDF is stored, right-clicking on the PDF and selecting print (without opening it). This one does give me the printout with the missing margins.
I've looked at the printer settings and printing preferences (from Printers and Faxes), there is no options that I could see to say to always make the document fit. Is there such a setting from inside Acrobat's preferences?
Hope this clarification makes my problem clearer to understand.

Calendar selection not the same as in iCal ?

Similar Messages

Maybe you are looking for