Calendar server 5.1.1 integration with PS 6.0 ??

Is there a out of box service which helps to integrate PS6.0 with Calendar Server. I'm looking for something like a Netmail service which integrates with Messaging server easily ??
Thanks.

Yes,
Portal6 communication providers do the job pretty well.
Tip: Backup your portal (/opt/SUNWps/...)
before installing these providers!
Cheers,
Alex :-)

Similar Messages

I am upgrading to Calendar Server 4.0 on NT with more than 9 nodes (or I already have) and my server won't start

I am upgrading to Calendar Server 4.0 on NT with more than 9 nodes
(or I already have) and my server won't start.

The steps are the same whether you have already upgraded or are about to.

Calendar Server 4.0 on the Windows NT platform can only support up to nine
nodes on one server, while 3.51 supported up to 14. If you have a Calendar
Server 3.51 with more than 9 nodes that you want to upgrade to Calendar Server
4.0, Netscape recommends that you migrate the extra nodes to another Calendar
Server 3.51 on another Windows NT system. To accomplish this:
<OL>
<LI>Install Calendar Server on another Windows NT machine and configure it to
use the same directory server as your current Calendar Server.
<LI>Stop and backup your current Calendar Server.
<LI>Individually zip up the node directories you want to move to the new
server. (drive:\unsers\unison\db\Nx
where "x" is the number of the node you want to use.)
<LI>Stop the new Calendar Server.
<LI>Unzip the files into the new Calendar Server in the same place as they
were on the old server.
<LI>Edit the unison.ini
file on the new server to add the nodes you have just migrated.
<LI>Edit the unison.ini
file on the old server to remove the nodes you have moved to the new server.
<LI>Edit the nodes.ini
file on the old server to remove the nodes you just moved and then add them
with the new hostname. Keep in mind that you will only be able to modify the
node network from the old host.
<LI>Run unidbfix -export
on both servers for all nodes.
<LI>Edit the remotenodes.ini
file on both servers to reflect your node topology.
<LI>Run unidbfix -import
to import the changes into the node databases.
<LI>Run unidbfix -c,
then -f,
then -c
again on both servers for all the nodes.
<LI>If you don't get any errors, run uninode -test all
to test if your nodes connections are set properly. If they are not, do not
start either of the servers; instead, fix the errors and try again.
<LI>Start both servers.
<LI>Log in and check to see if you can see people on remote nodes.
<LI>Notify the users on the moved nodes of their new calendar host.
<LI>If you did this in preparation of an upgrade, you can now run the upgrade to
4.0 since both servers contain fewer than 9 nodes.
</OL>

Use Disk Utility whihc is in the Utilities Folder.
Select your Boot Disk on the left.
Select Verify Permissions
If any errors the do Reapir permissions.
You might have to repeat the process.
see this:
Steve

Sql server 2008 r2 reportserver integration with sharepoint 2010 datasource credential

hello,
I am using sharepoint 2010 and sql server 2008 r2 and integrated in sharepoint integration mode and i am using windows authentication ,not keberos ,so i deletd negotiate in authentication tag in rssharepoint.config file,but when i tried to create data source
i am getting credential error and when windows credential is used it is getting connected.
please help.
thanks

Hi Krishnakumar_DeV,
Based on the current description, I understand that you should use the Windows NTLM authentication and delete the Negotiatein in authentication tag from RSReportServer.config which is located in the folder “C:\Program Files\Common Files\Microsoft Shared\Web
Server Extensions\XX\WebServices\Reporting”. You can use a local account or domain account to connect report server, while there is credential error message when creating data source, right?
To narrow down the issue, I want to confirm some information below:
1. To connect to remote data source, we can specify the following credentials’ ways:
•Prompt the user for credentials
•Store credentials
•Use Windows integrated security
•Use no credentials
Which credential way is you using and what’s the detailed error message?
2. How do you create the data source?
If I have any misunderstanding, please feel free to contact me.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Cisco NAC Guest Server for Wireless Users integration with IP telephony

Hi Team
I have a client who has the following requirement. The cleint requires a Guest server inorder to serve wireless needs for guests at their office. They want the guest to get their authentication codes via SMS. The cleint will have a lobby IP Phone where the guest will press the services button confgiured on the IP Phone. IT will then prompt the guest to enter his mobile number. Once the guest enters his mobile number, the guest will recieve a text via sms gateway with login credentials. They want to offload this from the receptionist and it is for this reason that they require this functionality.
Has anyone done this sort of deployment ? We have already proposed NAC guest server and Wireless controller but we do not know whether the XML application for subscribing the service on the IP Phone is available directly with cisco or does it need to developed.
Kindly advice on the same.
Regards
Azeem

Hi Vishal,
Please note that if you want to return ACLs (and usually in wired web auth you need to), you will have to integrate with ACS as NGS itself cannot return ACLs in the reply radius attributes.
Basically the process is as follows:
1 - Client plugs cable on switch.
2 - Web auth is triggered on the port.
3 - default ACL permiting only DNS and DHCP is applyed so that the client PC can obtain IP address and open a browser.
4 - Client will be redirected to the NGS hotspot login page.
5 - Client will enter credentials.
6 - Client broswer will send an HTTP POST packet containing the credentials.
7 - The switch will intercept the POS packets and retrieve the credentials entered.
8 - The switch will send Radius Access-Request to the ACS.
9 - The ACS will use the NGS as External Identity source to authenticate the client.
10 - The NGS will reply with Radius Access-Accept to the ACS and the ACS will reply to the switch including the ACL in the Access-Accept.
11 - the Switch authorizes the client on the port and applies the ACL it received from the ACS.
Please follow the document Nicolas posted as it is a good one.
HTH,
Thanks

RSA SecureID ACE/Server 6.1.2 integration issue with IDM2005Q4M3

I tried the SecureID adapter with the following steps:
1.setup the idm gateway on SecureID Server
2.copy SecureID's apidemon.exe to gateway.exe folder
3.add the administrator on secureid server and use it on idm resource adapter
4.run gateway.exe -d -fsso.log -l6
5.configure the SecureID adapter resource and test configuration is ok
6.add a rsa_test user on IDM, then assign the SecureID resource to the user
before step 6 every thing is fine, but the step 6 cause the IDM hangup, nothing response from gateway.
while I assign the user with SecureID resource in IDM, the gateway trace log print the trace log below and then hanged up:
01/09/2008 17.44.55.234000 [2464] (../../../../src/wps/agent/securid/SecurIdExtension.cpp,1439): Enter: login
01/09/2008 17.44.55.234000 [2464] (../../../../src/wps/agent/connect/RAEncryptor.cpp,69): RAEncryptor::Decrypt3DES: input length (8) moded to 1
my environment:
idm 2005Q4M3 on linux
gateway: Sun Java System Identity Manager 6.0 SP1 HF82 on windows 2003 sp1
RSA SecureID ACE/Server: 6.1.2 on windows 2003 sp1
Any help on RSA SecureID ACE/Server 6.1.2 integration with IDM2005Q4M3 is greatly appreciated.
Or anybody can send me some more docs on the integration process and the check point?
My email: [email protected]
Please help!
Edited by: Brave on Jan 9, 2008 4:36 AM

Found the solution. Problem was the acecInt.dll in the System32 folder was mismatching with the one in the RSA install folder. I copied the dll from the RSA install folder to the System32 and it started to work fine.
The error i was getting was "Get file operation with no or unknown handle aborted".

Sun Java System Calendar Server 2005q1 configuration issue

Hello,
I have installed Sun Java System Calendar Server (and dependencies systems) using the Java Enterprise System 2005Q1 on a Windows Server 2003 platform for an integration evaluation purpose. While configuring Sun Calendar Server it throw those message that comes in the console window:
Cargando propiedades predeterminadas...
com.sun.cal.install.instvars.InstallVariables::InstallVariables: SERIOUS ERROR:
BUILD PLATFORM NOT RECOGNIZED!
com.sun.cal.install.instvars.InstallVariables::setPlatformDefaults: SERIOUS ERRO
R: BUILD PLATFORM NOT RECOGNIZED!
com.sun.cal.install.util.IcsConf::readIcsConfFile: Cannot read null\ics.conf.tem
plate: Exception java.lang.Exception: File "C:\Sun\CALEND~1\bin\config\null\ics.
conf.template" does not exist
LoadWizardStateDefaults->Error: Could not read server configuration template fil
e "null\ics.conf.template": Cannot read "null\ics.conf.template: File "C:\Sun\CA
LEND~1\bin\config\null\ics.conf.template" does not exist
novalidate option set to: false
Ha terminado la carga de propiedades predeterminadas.
Espere.: Obteniendo el DN base del servidor LDAP
RuntimeSetupPanel->Error: Invalid boolean value: null. Setting default value to
true.
RuntimeSetupPanel->Error: Invalid boolean value: null. Setting default value to
true.
El directorio especificado estß vacÝo, especifique un directorio vßlido
<Pulse INTRO para continuar>
{code}
The installation complete but Calendar Server could not be started with start-cal command throwing a configuration error. I've searched on google and on this forum to find a solution but seems that no one has encountered a similar problem. Hope can find some help.

Mattek wrote:
I have installed Sun Java System Calendar Server (and dependencies systems) using the Java Enterprise System 2005Q1 on a Windows Server 2003 platform for an integration evaluation purpose.At this point I have to ask, why would you install such an old version of Java Enterprise Systems and most importantly why would you install on a platform that has been dropped for several years -- JES 2005Q4 was the last version to provide calendar/messaging/im server on Windows?
com.sun.cal.install.instvars.InstallVariables::InstallVariables: SERIOUS ERROR:
BUILD PLATFORM NOT RECOGNIZED!
com.sun.cal.install.instvars.InstallVariables::setPlatformDefaults: SERIOUS ERRO
R: BUILD PLATFORM NOT RECOGNIZED!Windows Server 2003 is not a supported platform for JES 2005Q1:
http://docs.sun.com/source/819-1573/index.html
It is however supported with JES 2005Q4:
http://docs.sun.com/source/819-4261/index.html
Regards,
Shane.

Cannot install Web Server + Calendar Server

I would like to install calendar server an RH3 to use with Lightning.
So I do ./installer &
I choose calendar server and webserver components.
But, just in the form after I cannot continue because :
Valid DNS Domain Name Required.
The DNS Domain name Provided could not be validated.
The services being installed require a valid internet domain name.
Installation cannot proceed untill a valid DNS Domain Name is provided.
I don't know what to enter in the fill "Name of the DNS domain"
I read the old post with the same issue, I read the General Installation Prerequisites and following :
12. If you are installing a communications product component, verify that the domain name of the host on which Access Manager will be installed is set.
To set the domain name, do one of the following:
If the file /etc/resolv.conf exists, enter the fully qualified domain name in the domain configuration entry. Example: domain mycomputer.company.com
If the file /etc/resolv.conf does not exist, enter the following command syntax:
# domainname fully_qualified_domain_name
13. Verify that the second column in the /etc/hosts file contains the fully-qualified domain name (FQDN) rather than a simple host name. For example:
192.18.99.999 mycomputer.company.com mycomputer loghost
I have severals PC on a domain.
Please, some one can explain me how to complete my installation ? What I need to enter on the hosts file ?
Why the installation needs a Internet domain name ?
Thank you
Emmanuel
Edited by: emmsan on Feb 8, 2008 4:59 AM
Someone knows if I have to install the web Server to make the calendar server functionnal ?
thank you

emmsan wrote:
Maybe can you help me one more time...
I reinstall a new RH3 and start ./install & of the commsuite5
- Directory Server Enterprise Edition 6.0 (it seems to be required too)
include :
* Directory Server 6 Core Server
* Directory Service Control Center
* Directory Server CLI tool
This is the LDAP Server no ???Correct. Directory Server 6.0 is Sun's LDAP compliant server.
BUT for the DNS Domain Name : I cannot find it, how to find this name ?At this juncture I should say that a basic working knowledge of TCP/IP network and DNS is required for this software. LDAP knowledge is also essential since you aren't installing the account provisioning tools (delegated administrator).
this is my etc/hosts :
127.0.0.1 wcap localhost.localdomain localhostwcap is the host nameThe etc/hosts should have an entry along the lines of:
1.2.3.4 wcap.mydomain.com wcapWhere 1.2.3.4 is the IP address of your system and mydomain.com is the domain-name for your system.
this is my etc/resolve.conf
; generated by /sbin/dhclient-scriptYour server is given an IP address via DHCP? That is definitely not a good idea.
What do you get when you run:
nslookup <calendar servers IP address>
I tried to enter abcde for the DNS domain name, but w/o successWhen you run:
nslookup wcap.abcde
=> do you get the IP address of the server returned?
Finally the installation works with these
host name : localhost
DNS domain name : localdomain
IP add : 127.0.0.1
etc..
I hope it will work, for the moment, we need to use the calendar server in our local domain.127.0.0.1 is the loopback address. You shouldn't use this.
Regards,
Shane.

Integrating calendar server with messaging server

hi all,
i have installed messaging server but am not able to bind messaging server and calendar server together.the calendar server does not start with ./start-cal command.i am attaching the ics.conf file below.
!!!! ics.conf Parameter Specification: You can have three kinds of records
!!!! #1) Uncommented Key: Starts with alphabet [a-z] and in the form a="b"
!!!! #2) Commented key: Start with !!<alphabet> OR !![a-z]
!!!! And in the form !!a="b" (min 7 chars length)
!!!! #3) Commented Lines: Starts with ! But not with !![a-z]
!!!! #4) Records other than types #1, #2, #3 will be ignored or won't be
!!!! processed e.g. blank lines, lines starting with non-alphabets etc..
!!!! All these parameters are SINGLE valued
!!!! Imaginary Domain Names siroe.com, varrius.com, florizel.com, and sesta.com
!!!! are used in the examples below.
! Description sent with insufficient disk space messages.
alarm.diskstat.msgalarmdescription = "percentage calendar partition diskspace available"
! Number of seconds between monitoring disk space.
alarm.diskstat.msgalarmstatinterval = "3600"
! Percentage of available disk space that triggers sending a warning message.
alarm.diskstat.msgalarmthreshold = "10"
! Whether alarm.diskavail.msgalarmthreshold is above or below percentage. -1 is below and 1 would be above.
alarm.diskstat.msgalarmthresholddirection = "-1"
! Number of hours between sending warning messages about insufficient disk space sent out.
alarm.diskstat.msgalarmwarninginterval = "24"
! Specifies the SMTP host for server alarms.
alarm.msgalarmnoticehost = "sonlinux.bg2iop.com"
! Specifies the SMTP port for server alarms.
alarm.msgalarmnoticeport = "25"
! Who are server alarms sent to?
alarm.msgalarmnoticercpt = "[email protected]"
! When server alarms are sent, who is the sender?
alarm.msgalarmnoticesender = "[email protected]"
! Default is "From: %s\nTo: %s\nSubject: ALARM: %s of \"%s\" is %u\n\n%s\n"
alarm.msgalarmnoticetemplate = ""
! Description sent with no service response messages.
alarm.responsestat.msgalarmdescription = "calendar service not responding"
! Number of seconds between monitoring services.
alarm.responsestat.msgalarmstatinterval = "3600"
! Only trigger sending a warning message if no service response.
alarm.responsestat.msgalarmthreshold = "100"
! Whether alarm.responsestat.msgalarmthreshold is above or below percentage. -1 is below and 1 would be above.
alarm.responsestat.msgalarmthresholddirection = "-1"
! Number of hours between sending warning messages about no service response sent out.
alarm.responsestat.msgalarmwarninginterval = "24"
! Enable (yes) or Disable (no) browser cache for performance reasons.
browser.cache.enable = "no"
! Retry time in seconds after a recoverable alarm delivery error.
caldb.berkeleydb.alarmretrytime = "300"
caldb.berkeleydb.archive.enable = "0"
! Interval between hotbackup or archivebackup in seconds
caldb.berkeleydb.archive.interval = "120"
! Maximum number of days of archivebackup
caldb.berkeleydb.archive.maxdays = "6"
! Minimum number of days of archivebackup
caldb.berkeleydb.archive.mindays = "3"
caldb.berkeleydb.archive.path = "/var/opt/sun/calendar/csdb/archive"
! Percentage threshold of allowable disk space usage
caldb.berkeleydb.archive.threshold = "70"
! Seconds between checkpointing.
caldb.berkeleydb.checkpointinterval = "60"
! Remove checkpoint files after synchronized? (yes/no)
caldb.berkeleydb.circularlogging = "yes"
! Milliseconds between checking database deadlocks.
caldb.berkeleydb.deadlockinterval = "100"
! Enable more advanced notifications - replyevent/refreshevent/replytodo/refreshtodo considered
! as advanced topics. By default, all these notifications will be published to
! modifyevent and modifytodo respectively. If it is enabled modifyevent will get only
! organizer updates to components and attendees replies and the refreshes triggered by replies
! to components will be published to the respective topics. (yes/no)
caldb.berkeleydb.ensmsg.advancedtopics = "no"
! Create an ENS message when a calendar is created? (yes/no)
caldb.berkeleydb.ensmsg.createcal = "no"
! Create an ENS message when an event is created? (yes/no)
caldb.berkeleydb.ensmsg.createevent = "no"
! Create an ENS message when a task is created? (yes/no)
caldb.berkeleydb.ensmsg.createtodo = "no"
! Create an ENS message when a calendar is deleted? (yes/no)
caldb.berkeleydb.ensmsg.deletecal = "no"
! Create an ENS message when an event is deleted? (yes/no)
caldb.berkeleydb.ensmsg.deleteevent = "no"
! Create an ENS message when a task is deleted? (yes/no)
caldb.berkeleydb.ensmsg.deletetodo = "no"
! Create an ENS message when a calendar is modified? (yes/no)
caldb.berkeleydb.ensmsg.modifycal = "no"
! Create an ENS message when an event is modified? (yes/no)
caldb.berkeleydb.ensmsg.modifyevent = "no"
! Create an ENS message when a task is modified? (yes/no)
caldb.berkeleydb.ensmsg.modifytodo = "no"
! Initial size of the in-memory Event Notification Server message queue. This queue stores all ENS messages other than alarm reminders.
caldb.berkeleydb.ensmsg.qsize = "10000"
! Create an ENS message when an event is refreshed? (yes/no)
caldb.berkeleydb.ensmsg.refreshevent = "no"
! Create an ENS message when a task is refreshed? (yes/no)
caldb.berkeleydb.ensmsg.refreshtodo = "no"
! Create an ENS message when an event is replied? (yes/no)
caldb.berkeleydb.ensmsg.replyevent = "no"
! Create an ENS message when a task is replied? (yes/no)
caldb.berkeleydb.ensmsg.replytodo = "no"
! Create an ENS message when a scheduling request written to the calendar is deleted? (yes/no)
caldb.berkeleydb.ensmsg.schedreq = "no"
! Physical path location of database event, task, and alarm files.
caldb.berkeleydb.homedir.path = "/var/opt/sun/calendar/csdb"
caldb.berkeleydb.hotbackup.enable = "0"
! Maximum number of days of hotbackup
caldb.berkeleydb.hotbackup.maxdays = "6"
! Path for archivebackup
!caldb.berkeleydb.archive.path
! Path for hobackup
!caldb.berkeleydb.hotbackup.path
! Enable/disable of archivebackup feature, yes/no
!caldb.berkeleydb.archive.enable
! Enable/disable of hotbackup feature, yes/no
!caldb.berkeleydb.hotbackup.enable
! Minimum number of days of hotbackup
caldb.berkeleydb.hotbackup.mindays = "3"
caldb.berkeleydb.hotbackup.path = "/var/opt/sun/calendar/csdb/hotbackup"
! Percentage threshold of allowable disk space usage
caldb.berkeleydb.hotbackup.threshold = "70"
! Max megabytes of checkpoint file.
caldb.berkeleydb.logfilesizemb = "10"
! Max threads of database.
caldb.berkeleydb.maxthreads = "10000"
! Megabytes of shared memory.
caldb.berkeleydb.mempoolsizemb = "4"
! Time before which to purge deletelog
caldb.berkeleydb.purge.deletelog.beforetime = "86400"
! Time interval between auto purge of deletelog
caldb.berkeleydb.purge.deletelog.interval = "86400"
! If "yes", open the database in readonly mode
caldb.berkeleydb.readonly = "no"
! Email of calendar database administrator.
caldb.calmaster = "[email protected]"
! Seconds between checkpointing.
caldb.cld.cache.checkpointinterval = "60"
! Remove checkpoint files after synchronized? (yes/no)
caldb.cld.cache.circularlogging = "yes"
!service.calendarsearch.ldap.primaryownersearchfilter = "(&(|(uid=*%s*)(cn=*%s*))(objectclass=icsCalendarUser))"
! Enables ("yes") or disables ("no") cld db cache
caldb.cld.cache.enable = "yes"
! Physical path location of cache database
caldb.cld.cache.homedir.path = "/var/opt/sun/calendar/csdb/cld_cache"
! Max megabytes of checkpoint file.
caldb.cld.cache.logfilesizemb = "10"
! Max threads of database.
caldb.cld.cache.maxthreads = "1000"
! Megabytes of shared memory.
caldb.cld.cache.mempoolsizemb = "4"
! Type of Calendar Lookup Database plugin to use ("local" "algorithmic" or "directory").
caldb.cld.type = "local"
! Count data base statistics? (yes/no)
caldb.counters = "yes"
! Maximum number of calendars with counters.
caldb.counters.maxinstances = "100"
! Maximum number of backlogged requests before the server obtains a new network connection.
caldb.dwp.connthreshold = "1"
! Initial number of connections for DWP client to make to each DWP host.
caldb.dwp.initconns = "2"
! Initial number of threads for handling DWP requests.
caldb.dwp.initthreads = "2"
! Maximum number of connections allowed to a DWP server.
caldb.dwp.maxcons = "1000"
! Maximum number of threads to service HTTP requests in csdwpd.
caldb.dwp.maxthreads = "1000"
! Specifies if the server performs MD5 hash checking of all DWP requests.
caldb.dwp.md5 = "n"
! IP address of a specified DWP server.
!!caldb.dwp.server.[hostname.xyz.com].ip = "a.b.c.d"
! Port number of a specified DWP server (Algorithmic CLD only).
!!caldb.dwp.server.[hostname.xyz.com].port = "59779"
! Default DWP server (LDAP CLD only), used if user's icsDWPhost value does not exist.
!!caldb.dwp.server.default = "hostname.xyz.com"
! Stack size for DWP threads.
caldb.dwp.stacksize = "65536"
! Process alarms on the alarm queue -- that is, store them in the alarm queue when an event/todo is saved
caldb.serveralarms = "1"
! Timeout for contacting ENS. If no response, we assume ENS is not running
caldb.serveralarms.acktimeout = "30"
! Dispatch -- that is, enable alarm dispatching. When an alarm trigger time arrives send out email or ENS message.
caldb.serveralarms.dispatch = "yes"
! Enable binary alarms. Used by csnotifyd and csadmind. (default: yes)
!caldb.serveralarms.binary.enable = "yes"
! Binary alarm url. Used by csnotifyd and csadmind. (default: enp:///ics/alarm)
!caldb.serveralarms.binary.url = "enp:///ics/alarm"
! Custom alarm url. Use this to get xml or calendar mime type contents
!caldb.serveralarms.url = "enp:///ics/customalarm"
! Custom alarm url contenttype. (text/xml or text/calendar)
!caldb.serveralarms.contenttype = "text/calendar"
! Dispatch type for Calendar Server alarms ("ens" o "smtp").
caldb.serveralarms.dispatchtype = "ens"
! Initial number of threads for the Event Notification Server.
caldb.serveralarms.initthreads = "0"
! Specifies how long, in seconds, the server will continue to try reconnecting to ENS before giving up. -1 means forever.
caldb.serveralarms.maxretrytime = "-1"
! Maximum number of threads for the Event Notification Server
caldb.serveralarms.maxthreads = "10"
! Time to sleep, in seconds, after a timeout connecting to ens before making another attempt to connect to ens
caldb.serveralarms.retryinterval = "5"
! Stack frame size for Event Notification Server threads.
caldb.serveralarms.stacksize = "65536"
! Total time, in seconds, to retry connecting to ENS on startup.
caldb.serveralarms.startupretrytime = "30"
! Send alarms to this SMTP host.
caldb.smtphost = "sonlinux.bg2iop.com"
! Specifies the directory in cal/bin/config containing the localized version of the files used to format email notifications.
caldb.smtpmsgfmtdir = "en"
! Specifies the SMTP port.
caldb.smtpport = "25"
! Event reminder format file.
calmail.eventreminder.fname = "mail_eventreminder.fmt"
! Event cancellation format file.
calmail.imipeventcancel.fname = "mail_eventcancel.fmt"
! Event CANCEL NOTIFICATION message format file
calmail.imipeventcancelnotification.fname = "mail_eventcancelnotification.fmt"
calmail.imipeventcancelnotificationrecur.fname = "mail_eventcancelnotificationrecur.fmt"
! Event NOTIFICATION message format file
calmail.imipeventnotification.fname = "mail_eventnotification.fmt"
calmail.imipeventnotificationrecur.fname = "mail_eventnotificationrecur.fmt"
! Event notification format file.
calmail.imipeventpublish.fname = "mail_eventpublish.fmt"
! Event REPLY message format file
calmail.imipeventreply.fname = "mail_eventreply.fmt"
! Event REQUEST message format file
calmail.imipeventrequest.fname = "mail_eventrequest.fmt"
! Task cancellation format file.
calmail.imiptodocancel.fname = "mail_todocancel.fmt"
! Task notification format file
calmail.imiptodopublish.fname = "mail_todopublish.fmt"
! Task REPLY message format file
calmail.imiptodoreply.fname = "mail_todoreply.fmt"
! Task REQUEST Message format file
calmail.imiptodorequest.fname = "mail_todorequest.fmt"
! Task reminder format file.
calmail.todoreminder.fname = "mail_todoreminder.fmt"
! Anonymous login CALID.
calstore.anonymous.calid = "anonymous"
! Does server support only two privacy types for components - PRIVATE (acts as confidential) /PUBLIC instead of PRIVATE/CONFIDENTIAL/PUBLIC
calstore.binaryprivacy.mode = "no"
! When creating new calendar of user, whether to lowercase calendar or not
! Also, when looking up calendar, whether to lowercase or not
calstore.calendar.create.lowercase = "n"
! For a newly created calendar, set the ACL to this
calstore.calendar.default.acl = "@@o^a^r^g;@@o^c^wdeic^g;@^a^fs^g;@^c^^g;@^p^r^g"
! Definition of the "owner" acl
calstore.calendar.owner.acl = "@@o^a^rsf^g;@@o^c^wdeic^g"
! Timezone ID used when importing files.
calstore.default.timezoneID = "America/New_York"
! Whether to filtering the private/confidential events on queries to server
calstore.filterprivateevents = "yes"
! Is user's default calendar included in user's freebusy-calendar-list or not
calstore.freebusy.include.defaultcalendar = "yes"
! Can user's default calendar be removed from user's freebusy-calendar-list or not
calstore.freebusy.remove.defaultcalendar = "no"
! Maximum number attendees to be allowed in a LDAP group when expanding event. Value of 0 means expand group entirely.
calstore.group.attendee.maxsize = "0"
! Maximum number of events created by recurrence
calstore.recurrence.bound = "60"
! Is user's default calendar included in user's subscribed-calendar-list or not
calstore.subscribed.include.defaultcalendar = "yes"
! Can user's default calendar be removed from user's subscribed-calendar-list or not
calstore.subscribed.remove.defaultcalendar = "no"
! For attendee calendar lookup, when encountering string that looks like (jdoe OR jdoe:tv), treat string as a userid (uid) when looking-up in Directory.
! Value can be {uid | cn | gid | res | mailto | cap}
calstore.unqualifiedattendee.fmt1.type = "uid"
! For attendee calendar lookup, when encountering string that looks like ([email protected]) (has @ sign), treat string as a mailto address when looking-up in Directory
! Value can be {uid | cn | gid | res | mailto | cap}
calstore.unqualifiedattendee.fmt2.type = "mailto"
! For attendee calendar lookup, when encountering string that looks like (John Doe) (has space), treat string as a common name (cn) when looking-up in Directory
! Value can be {uid | cn | gid | res | cap}
calstore.unqualifiedattendee.fmt3.type = "cn"
! Maximum number of results returned from LDAP lookup from user search. Value of 0 means no limit.
calstore.userlookup.maxsize = "200"
! Is Server in Virtual Domain mode or not (this affects 5.0p2 only)
calstore.virtualdomain.mode = "n"
! Enable (y) or disable (n) Access Control plugin.
csapi.plugin.accesscontrol = "n"
! Load only the plugin specified in csapi.plugin.authentication.name? (y/n)
csapi.plugin.authentication = "n"
! Enable (y) or disable (n) Calendar Lookup Database plugins.
csapi.plugin.calendarlookup = "n"
! Specifies the name of a specific Calendar Lookup Database plugin to load. If "*", load the plugins.
csapi.plugin.calendarlookup.name = "*"
! Load only the plugin specified in csapi.plugin.database.name or if not specified, load all database plugins in alphabetical order.
csapi.plugin.database = "y"
! Only load this specific plugin if csapi.plugin.loadall is no and csapi.plugin.database is yes.
csapi.plugin.database.name = "cs_caldb_berkeley10"
! Load only the plugin specified in csapi.plugin.datatranslator.name? (y/n)
csapi.plugin.datatranslator = "y"
! Only load this specific plugin if csapi.plugin.loadall is no and csapi.plugin.data translator is yes.
csapi.plugin.datatranslator.name = "cs_datatranslatorcsv10"
! Enable (y) or disable (n) database-to-output format plugins.
csapi.plugin.dbtranslator = "y"
! If "*", then load all the database-to-output format plugins. If a library name, only load that plugin. csapi.plugin.dbtranslator must be set to "yes" to load plugin
csapi.plugin.dbtranslator.name = "*"
! Load all plugins found in the plugins directory? (y/n)
csapi.plugin.loadall = "n"
! Load only the plugin specified in csapi.plugin.userprefs.name? (y/n)
csapi.plugin.userprefs = "n"
! Load only this plugin if csapi.plugin.loadall is no and csapi.plugin.userprefs is yes.
!!csapi.plugin.userprefs.name = "plugin_name"
! Enable the RSA Cypher Encryption Family Services for SSL
!!encryption.rsa.nssslactivation = "on"
! Define the Certificate name for the RSA Cypher Encryption Family
!!encryption.rsa.nssslpersonalityssl = "SampleSSLServerCert"
! Define the location of the RSA Cypher Encryption Family token
!!encryption.rsa.nsssltoken = "internal"
! Specifies if the auto refresh feature is enabled or disbaled. (yes/no)
gse.autorefreshreplystatus = "yes"
! Specifies (in seconds) how long to wait before the server scans the schedule queue for incoming jobs.
gse.belowthresholdtimeout = "3"
! Maximum number of concurrent threads the server uses to process the schedule queue.
gse.maxthreads = "10"
! Maximum length of time the server will retry to complete a group scheduling job.
gse.retryexpiredinterval = "86400"
! Specifies (in seconds) how often the server will retry a previous failing job.
gse.retryinterval = "300"
! Maximum stack size (in bytes) of a group scheduling thread
gse.stacksize = "65535"
! global flags to control notification for invitation and cancellation.
! Enable (yes) Disable (no), default is enabled. Notification will be sent.
ine.cancellation.enable = "yes"
ine.invitation.enable = "yes"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.basedir.path = "/opt/sun"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.betamajorversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.betaminorversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.caldbtype = "local"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csinstalldir.path = "/opt/sun"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodbasedir.path = "/opt/sun/calendar"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodclassesdir.path = "/opt/sun/calendar/classes"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csproddir.path = "/opt/sun"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodjavadir.path = "???"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodlibdir.path = "/opt/sun/calendar/lib"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodtoolsdir.path = "/opt/sun/calendar/tools"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csproduicustdir.path = "/opt/sun/calendar/uicust"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.fullversion = "6.0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.majorversion = "6"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.minorversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.osarch = "i386"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.osname = "linux"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.ostype = "unix"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.osversion = "2.6.9-22.el"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.patchversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.serveruidpassword = "icsuser"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.startupafterinstall = "no"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.startupatboot = "no"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.userauthtype = "ldap"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.userprefstype = "ldap"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.version = "6.0"
! Base DN for LDAP authentication. If not specified, use local.ugldapbasedn.
local.authldapbasedn = "o=bg2iop.com, dc=bg2iop,dc=com"
! Bind credentials (password) for user specified in local.authldapbinddn.
local.authldapbindcred = "admin123"
! DN used to bind to LDAP authentication host to search for user's dn.
local.authldapbinddn = "cn=Directory Manager"

Hi Venigalla,
You can implement a federated portal network (FPN) using the SAP NetWeaver platform to share content between portals.
A federated portal network allows organizations with distributed portal installations, both SAP and non-SAP, to provide a single portal access point per user to portal information, services and applications distributed on portals in the network.
WSRP-based application sharing (FPN Mode used for for integrating content between SAP and Non SAP portals) :-
--> Content administrators on a SAP NetWeaver consumer portal can integrate WSRP portlets (i.e. iViews) from remote non-SAP portals into SAP NetWeaver Portal.
--> SAP NetWeaver developers can create WSRP compliant iViews that can be consumed in non-SAP consumer portals.
You may kindly go through the below link, should be helpful:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/23fb36cad10d23e10000000a1553f7/frameset.htm
Regards,
Anagha

Calendar Integration with Portal Server 6.0

Hi,
I have installed Calender Server 5.1.1 with portal server6.0..When click the Launch Calendar channel link in my portal page,it takes me to login page for Calendar Server on.I expected it to take me to the calendar page .I donot want to re-authenticate every time i launch a calendar.Any ideas??
Thanks,
Ramnath

Quickest path to success...
stop the cal server
cd to Install Path/cal/bin/config
edit ics.conf
change "service.htttp.ipsecurity" from yes to no
save you changes
restart the server
hope this helps

Lync integration with Third-Party mail server's

Hi all,
Does Lync integrates with any third party mail servers?
Or it integrates only with Exchange Server?
Regards,
ArunKumar.J

Agree with Thamara. Exchange is the only platform supported for presence as well as voice functionality. The client uses EWS to communicate with the server to check calendar integration, nothing else is going to mimic this properly enough to
avoid issues.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Exchange Integration with MSX-A on a Windows 2003 Server

Hi
We try to integrate Microsoft Exchange (Version 2003 SP1) into SAP Enterprise Portal 6.0 SR1. The MSX-A components are installed on the OWA System, a different Windows 2003 System with Outlook XP (SP3) on it.
The error displayed in the Calendar iView on the Portal:
"An internal error occurred while generating the XML from the MSX-A component"
From the "SAP EP Test Exchange Transport Setup" Tool an error occures on the "Data Retrieval" Test:
"An error occurred retrieving the data."
and in detail:
MAPI_E_LOGON_FAILED(80040111)
MS KBase http://support.microsoft.com/kb/181739/en-us didn't help. To resolution 3: Policy "Log on Locally" on a Windows 2003 doesn't exist anymore (?). "Deny Log on Locally" isn't given to relevant groups.
Thanks and best regards
Nicolaj

hi All
i am illustrating the process of integration the central notes to be referred and constraints .hope this definitely helps you please do not forget to give full points for this effort
with regards
subrato kundu
Process
Microsoft outlook Integration With SAP Enterprise Portal 6.0
(Process description)
These documents describe the entire process of integrating Exchange server with enterprise portal server to leverage the usage of lotus notes within the portal framework.
Step1: Create a System
o Choose System AdministrationSystem configurationSystem LandscapePortal ContentContent Provided by SAP. Right click on collaboration and then choose New From ParSystem.
o Select com.sap.netweaver.col.app.gw and choose next.
o Select a server (Microsoft Exchange server) and then choose next.
o Enter the System Name and ID (for ex Exchange) and choose next and then finish.
o Enter System Aliases by choosing system Alias from the display drown list.
o Enter the system Alias in the alias field and choose add and then save.
Step II: Create E-Mail Transport
 The email transport defines the SMTP server and other configuration required for sending e-mails. To configure an e-mail transport choose
 System AdministrationSystem ConfigurationKnowledge ManagementCollaborationGroupWare TransportsMail Transport
 SMTP Sever: The address of the SMTPServer for sending e-mails
 Sent Messages: You specify the folder on the server where the sent e-mail is to be store: -Sent Items on Microsoft Exchange Server.
 System Alias name: Alias that was defined for the groupware server in system configuration.
Step III: Check E-Mailing Service
This is a global service that is required for sending e-mails and which can be located by choosing System AdministrationSystem configurationKnowledge ManagementContent ManagementGlobal servicesMailing Service. This service needs to be active and an email transport must already have been created.
Microsoft Exchange Transports
The overall transport consists of two parts: MSX-J on the portal server and the MSX-A on the Exchange Server or a machine near to the Exchange Server.
MSX-J is the java part that runs on the portal server is deployed automatically on the portal server during installation, and implements the groupware API.It uses the Groupware APIs and repository development kit.
MSX-A is the active server page and sap exchange connector.dll running on a n iis server with Microsoft Collaboration data objects (CDO) and in the same domain as the exchange server or in a trusting domain .The ASP and DLL are Collectively CALLED MSX-A and is installed as part of the Outlook Installation. This needs to be installed on every IIS SERVER dedicated to the MS Exchange Server
 The Process flow is
1.TheMSX_J transport makes an HTTP(s) call to the MSX_A running on the IIS.
2.Microsoft Internet Information Server (IIS) uses Basic Authentication to authenticate user based on NT user/password against the Microsoft Exchange Server.
3.CDO uses the authentication token and fetches the data.
4.MSX-A converts the data into XMl and returns it to MSX-J
Installation of MSXA Components
You have to carry out these steps for every IIS that accesses the exchange server or the Outlook WEB Access 5.5 SP Server in the system landescape:
1.Locate the MSX-A component shipped with Exchange transport.
The components can be found in<irj>\root\WEB-INF\PORTAL\PORTALAPPS\com.sap.netweaver.coll.appgw\WEB INF\external\Exchange.
2 Locate an IIS that is in the same domain as the Exchange Server or in a trusted domain.
3.Create a folder on the IIS for example,c:\SAPExchangeTransport.
4.Copy the MSX-A Components to the folder you just created.
5.Register the DLL by using command regsrvr32 in the command prompt for example c:\winnt\sysytem32\regsvr32.exe c:\SAPExchangeTransport\SapExchangeConnector.dll
6.Create a new Iis Website or if using Outlook Web Access 5.5 sp4 create a virtual directory
Since most of configuration errors arise in the setup and configuration of the MSX-A components a separate test application is shipped with the connectivity, which allows you to check that the setup is correct.
1.locate SAPPXchTest.exe which is shipped with the exchange transports.The components can be found at <irj>\root\portalapps\com.sap.netweaver.coll.appl.gw\external\exchange.
2 copy the executable file to the machine on which the MSX-A component has been deployed.
3.Test the CDO version by launching the executable file on the machine on which msx-a was deployed.Choose Test CDO-Version .You should receive a success message .if you recive an error message follow the instructions given
4Test data retrieval by launching the executable file on the machine on which MSX-A was deployed choose TestData Retrieval Fill in necessary fields you should receive a success message but if you receive an error message follow the instructions given
5.Choose Save Results
6.open the log file indicted by the message
Notes
0000801234 Additional attachment in room created appointments
0000788151 Post Installation Steps for Groupware after an upgrade
0000763062 Problem creating an appointment with attachment
0000738965 E-mail address is mandatory for Groupware Integration
0000736644 Mandatory Steps for MS Exchange Integration
0000736541 Support information for MS Exchange Integration
0000732911 Integrating Outlook Web Access in Enterprise Portal 6.0
0000712902 SSO to Outlook web access using user/password does not work
Constraints
Constraints of Microsoft Exchange Connectivity
 The Microsoft Exchange transport currently only support items with types appointment and meeting request .Other types such as discussion and not currently not supported.
 Deleting an instance of a recurring appointment affects only that particular instance
 Calendar items in personal folder are not supported. Users can only view and modify items located on the exchange server from the iviews
 Public folders on the exchange server are not supported
 Calendar items are delivered as such if sent to recipients within the intranet .If the recipients is in different domain than the sender ,the format in which the items are delivered depends on the server responsible for sending the item in question

Calendar Server 3.5: Problem using user's ID with uniuser -mod command

When there are two users who have the same Common Name (CN) in LDAP but
different User ID's (uid
field), I have a problem using the uid
field as an argument to
uniuser -mod in Netscape Calendar
Server (NCS) 3.5. For example, there may be two users, User1 and User2, who
both have the CN "John Smith." 

User1
uid: jsmith2
sn: Smith
givenname: John
nscalxitemid: 10001:00314
User2
uid: jsmith
sn: Smith
givenname: John
nscalxitemid: 10001:00213

Let's say I want to change the value for nsCalOrgUnit2
for User1 to "jsmith." In NCS 4.0,
I can specify the uid as
an argument to uniuser -mod
. However, in NCS 3.5, if I specify the
uid as an argument to
uniuser -mod, the entry
for the user does not get changed. 

Calendar Server 4.0 

%uniuser -mod "ID=00314" -m "OU2=jsmith/OU3=People" -n 10001
 
uniuser: modified "Smith, John" 

(The LDAP entry for User1 also reflects this change.)

Calendar Server 3.5 

%uniuser -mod "ID=00314" "OU2=jsmith/OU3=People" 10001
 
uniuser: no need to modify "Smith,John" 

(The LDAP entry for User1 does not reflect the change.) 

%uniuser -mod "S=Smith/G=John/ID=00314" "OU2=jsmith/OU3=People"
10001 
uniuser: no need to modify "Smith,John" 

(The LDAP entry for User1 does not reflect the change.) 

If I use the command uniuser -mod "S=Smith/G=John"
"OU2=jsmith/OU3=People" 10001
in NCS 3.5, the script will change the entry of the first "John Smith" in the
database and will cause the LDAP entry for this user to be updated as well.
However, the entry modified may or may not be the correct one. So, in
NCS 3.5, is there a way to specify a particular uid
to ensure that the correct LDAP entry
is modified?

To modify a user's information using the uid
field in Calendar Server 3.5, change
the user.ini file. The
following steps show how to change a user's information by modifying the
.ini file: 

<OL>
<LI>Open the user.ini
file, which is in the path /users/unison/misc/user.ini

<LI>Add a section containing the desired changes. For example, 

[Test] 
OU2 = jsmith 
OU3 = People 

<LI>Run uniuser with
the following options: 

% uniuser -mod "ID=00314" -s Test 10001
</OL>

It turns out to be a problem with the user Keychain. It has some weird entry that was sending the wrong password. I delete all entries to the server and that corrected the problem

HT4910 My iCal has frozen after I tried to paste info from an email into a reminder. I get a "server reports an error" message with what I tried to paste in the box. Calendar is frozen and will only close by forcing it. Any help?

My iCal has frozen after I tried to paste info from an email into a reminder. I get a "server reports an error" message with what I tried to paste in the box. Calendar is frozen and will only close by forcing it. Any help?

Did another window open with the pasted information? If so, try hitting "enter/return" key and "delete" key at the same time. That should get rid of the current action on the ical, the extra window should go bye-bye, and all should be fine with the world.

Oracle Calendar Server Configuration Assistant fails with Red Hat ES 4

I am trying to install Oracle Collaboration Suite 10.1.2 on a Red Hat ES 4 server platform.
I have installed with the Advanced Installation Option. The infra installation proceeds well then when i try to install the ocs application tier (different Oracle Home) the Calendar Server Configuration Assistant fail.
Output :
================================================================================================================
Output generated from configuration assistant "Calendar Server Configuration Assistant" (attempt 1):
Time zone selected: EBST3EBDT.Warning: Existing node(s) found in unison.ini. Using node 1 for configuration tasks.
Current State for Instance:ocsapp.lf-ocs1.lima_e_falcao.inet
Component Type Up Status In Sync Status
================================================================================
1 HTTP_Server HTTP_Server Up True
2 OC4J_Content OC4J Up True
3 OC4J_Mail OC4J Up True
4 OC4J_OCSADMIN OC4J Up True
5 OC4J_OCSClient OC4J Up True
6 OC4J_Portal OC4J Up True
7 OC4J_RM OC4J Down True(Disabled)
8 OC4J_Wireless OC4J Up True
9 OC4J_imeeting OC4J Up True
10 Service_Component_Cont OC4J Up True
11 home OC4J Up True
Warning: more than one process-type Element in the snippet. only the 1st one is appended
Error: can not append, there is a same named process type element in the exisitng ias-instance.ias-component
Error: Could not configure OPMN module information.
java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1
     at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.configureOPMN(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.run(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.main(Unknown Source)
3 [main] ERROR emSDK.config - oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
     at oracle.sysman.emSDK.conf.TargetInstaller.addTargetInt(TargetInstaller.java:1148)
     at oracle.sysman.emSDK.conf.TargetInstaller.addTargetFromFile(TargetInstaller.java:1075)
     at oracle.sysman.emSDK.conf.TargetInstaller.main(TargetInstaller.java:3669)
Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
Warning: ocad.conf already included in /u01/oracle/product/10.1.2/ocs_2/Apache/Apache/conf/oracle_apache.conf.
Error: java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1: Registration of ocal_targets.xml into targets.xml failed.unistart: Oracle Calendar Server 10.1.2.0.0
unistart: Copyright (c) 1993, 2005, Oracle.
unistart: All rights reserved.
unistart:
unistart: opmnctl: opmn is already running
unistart: opmnctl: starting opmn managed processes...
unistart: The Calendar Server started successfully.
Orclguest account has already been provisioned for Calendar.
Fatal Exception caught : java.lang.NullPointerExceptionopmnctl: stopping opmn managed processes...
Configuration assistant "Calendar Server Configuration Assistant" failed
================================================================================================================
Someone can help me?
Thanks a lot.

is it a reinstallation or a first one on a bare server ? if there were several attempts please be sure you cleaned evrything before launching the installation :
- product directory
- /etc/ora*
- database
- oraInventory
- /tmp (I had a similar issue with remaining files in /tmp, even after rebooting)
If it doesn't work, check that you don't hit the NO-EXCUTE problem (see the OCS 10.1.2 release notes, look for "noexec")

How To Setup A Local Exchange Server Integrated With Office365 For A Single Mailbox

Hello,
We recently migrated to Office365 but had an issue since we need more than 16 simultaneous connections to a single mailbox. Because of this, we need to deploy a local Exchange Server that will be used to host a single mailbox that requires up to 500 simultaneous
connections for a Contact Center application. I'm looking for information on how to setup the local Exchange Server to basically create a local instance of a mailbox hosted on Office 365. So we can have our application open the numerous simultaneous connections
to our local server which will then connection to Office 365 to send/receive email through the mailbox hosted on Office365.
Please let me know if you have any information or resources you can direct me toward.
Thanks,
Chris

Hi,
To deploy local Exchange server integrated with Office 365, we can depend on Exchange Server Deployment Assistant:
http://technet.microsoft.com/en-us/exdeploy2013/Checklist?state=2419-W-AAAAAAAAQAAAAAEAAAAAAAA%7e
Please note that there may be 9646 error if there are many simultaneous connections at the same time.
Thanks,
Angela Shi
TechNet Community Support

Calendar server 5.1.1 integration with PS 6.0 ??

Similar Messages

Maybe you are looking for