Calendar Server 7u2 fails with iOS 5

Hello everybody.
Connecting to Oracle Calendar Server for CalDAV with an iPhone 4, updated to iOS 5, fails when loading the calendar. The iPhone can neither see the calendar, nor load tasks. The connection works fine with Thunderbird 7.0/Lightning.
The iPhone also complains that it can't validate the (definitely and double-checked) username and password, regardless of whether we use HTTP or HTTPS. Is there a configuration option or patch we can install?
Thanks for the help,
John

arnaudq wrote:
Try davadmin config -o service.dav.propfinddavheadervalue -v "1, 3, access-control, calendar-access, calendar-schedule, calendar-auto-schedule, addressbook, sync-collection, extended-mkcol, calendar-proxy, calendarserver-principal-property-search"
although the symptoms are usually different (but I never tried the upgrade account scenario myself).Thank you, this at least is part of the solution. I can now add the calendar account in the iPhone's settings app as it stopped complaining that it can't confirm the account. By the way, this is a fresh installation of version 7u2 and I added the account to the iPhone after importing the calendar from an .ics backup... if that helps :-).
However, even when setting the iPhone to sync "all events" instead of "the last month", only meeting invitations how up inside the CalDAV calendar in the Calendar app. To be clear: events that have been created by the same calendar account do not show up (neither past calendar entries, nor future entries).
Is there something else I can try?
Thanks,
John

Similar Messages

Apple should make a server hardware/OS with iOS level security. This could compete well with the breach infested pre secure OS/hardware server systems like Windows Linux OSX. It should be structurally immune to phishing etc

Apple should make a server hardware/OS with iOS level security. This could compete well with the breach infested pre secure OS/hardware server systems like Windows Linux OSX. It should be structurally immune to phishing etc and could be sold easily as a secure alternative. It should be based on structural hardware based security as has been demonstrated in the iOS operating system and the hardware should be made in secure facilities in the US. Those Chinese put weaknesses into the hardware they make as has been documented on 60 minutes.

Apple's entry in the server market has come and gone - is there a question in there somewhere?

Calendar server and address book server login fails with outlook connector

Hi all,
I have installed Java Communication Suite 5 according to the doc http://blogs.sun.com/factotum/resource/comms5-install-linux.html.
When i deploy the connector i get the pop ups saying "Server:servername:3080
Error:service not available" also
"Server:servername:80/uwc"
Error:service not available"
asking to login to calendar server and address book server.Clicking "OK" allows install.
In outlook i can send and receive mails but not the meeting requests.It gives the error "login to calendar server" when i create a meeting request.
Please let me know what i have to do to get rid of the error.The username and passwd entered is correct.
Regards,
lmeenakshy

Hi,
When i deploy the connector i get the pop ups saying
"Server:servername:3080
Error:service not available" also Do you get exactly what you say above, or have you substituted in the real server name for "Server:servername:" above?
I would check through the outlook connector deployment configuration to verify that you have inserted valid information into all of the host & port fields - perhaps check the .ini file that is created to see if it has "Server" and "servername" listed.
"Server:servername:80/uwc"
Error:service not available"You are able to log into UWC via the web-interface and access your calendar/pab and edit/modify/delete calendar & addressbook entries right? The services are all up?
asking to login to calendar server and address book
server.Clicking "OK" allows install.The outlook connector deployment software gives you the option to increase the logging level, try that and see what the logs say - what was it trying to connect to/check which failed.
In outlook i can send and receive mails but not the
meeting requests.It gives the error "login to
calendar server" when i create a meeting request.
Please let me know what i have to do to get rid of
the error.The username and passwd entered is
correct.I suspect this is more of an underlying configuration issue that needs to be sorted out, once that happens you shouldn't have to keep logging in.
Regards,
Shane.

Calendar Server eating events with locations - 412 precondition failed

Start off saying that we are pretty sure this was happening to us on Lion before the upgrade as well.
Here is the scenario:
We get an ics attachement to an email. The user opens it in Calendar - it shows up grey. They click on it, select the Calendar Server calendar, and click accept.
If the ics does not have an attachement, no problems. If the user saves it to their iCloud calendar, no problem.
If the ics has a location set, and they save it to their Calendar Server calendar, it sends the acceptance, shows up on their calendar for a few seconds, then completely dissapears.
caldavd access log looks like:
::1 - rmoore [03/Aug/2012:10:14:26 -0700] "PUT /calendars/__uids__/C807D9C5-2A89-4F46-BB4B-B0183492079E/calendar/040000008200E 00074C5B7101A82E0080000000070C0169E6171CD01000000000000000010000000A1E12E37B7A50 748845FD500AA823A41.ics HTTP/1.1" 412 225 "-" "Mac OS X/10.8 (12A269) CalendarAgent/47" i=0 t=454.2 or=2 cl=2425 xff=50.47.42.22 fwd=50.47.42.22
::1 - - [03/Aug/2012:10:14:26 -0700] "GET /calendars/__uids__/C807D9C5-2A89-4F46-BB4B-B0183492079E/calendar/040000008200E 00074C5B7101A82E0080000000070C0169E6171CD01000000000000000010000000A1E12E37B7A50 748845FD500AA823A41.ics HTTP/1.1" 401 141 "-" "Mac OS X/10.8 (12A269) CalendarAgent/47" i=0 t=3.1 or=2 fwd=50.47.42.22
::1 - rmoore [03/Aug/2012:10:14:26 -0700] "GET /calendars/__uids__/C807D9C5-2A89-4F46-BB4B-B0183492079E/calendar/040000008200E 00074C5B7101A82E0080000000070C0169E6171CD01000000000000000010000000A1E12E37B7A50 748845FD500AA823A41.ics HTTP/1.1" 404 383 "-" "Mac OS X/10.8 (12A269) CalendarAgent/47" i=0 t=32.4 or=2 xff=50.47.42.22 fwd=50.47.42.22
notice the put on the event thew a 412 - precondition failed, then the subsequent GET requests thro a 404 because the event is not there.
Anyone seen this?

>>>> Request starting at: 1344020922.761
PUT /calendars/__uids__/C807D9C5-2A89-4F46-BB4B-B0183492079E/calendar/040000008200E 00074C5B7101A82E0080000000070C0169E6171CD01000000000000000010000000A1E12E37B7A50 748845FD500AA823A41.ics HTTP/1.1
Host: localhost:8443
User-Agent: Mac OS X/10.8 (12A269) CalendarAgent/47
Accept: */*
Accept-Language: en-us
Accept-Encoding: gzip, deflate
If-Schedule-Tag-Match: 4301b17d-c2d1-49a9-9af1-a3810ae5f4d2
Content-Type: text/calendar
Authorization: Digest username="rmoore", realm="caprice.sparkred.com", nonce="463074419189777292313109132200432817385079663829408081379", uri="/calendars/__uids__/C807D9C5-2A89-4F46-BB4B-B0183492079E/calendar/04000000 8200E00074C5B7101A82E0080000000070C0169E6171CD01000000000000000010000000A1E12E37 B7A50748845FD500AA823A41.ics", response="ee8e53d94372e6b14e22e75e3ec755b0", algorithm="md5"
X_FORWARDED_PROTO: https
x-apple-service-webcal-enabled: true
x-apple-service-wiki-enabled: true
X-App-Scheme: https
x-apple-service-webauth-enabled: true
x-apple-service-profile-manager-enabled: true
X-Forwarded-For: 50.47.42.22
X-Forwarded-Host: caprice.sparkred.com
X-Forwarded-Server: static-50-47-42-22.sttl.wa.frontiernet.net
Connection: close
Content-Length: 2400
BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Apple Inc.//Mac OS X 10.8//EN
CALSCALE:GREGORIAN
BEGIN:VTIMEZONE
TZID:US/Central
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
RRULE:FREQ=YEARLY;BYMONTH=3;BYDAY=2SU
DTSTART:20070311T020000
TZNAME:CDT
TZOFFSETTO:-0500
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
RRULE:FREQ=YEARLY;BYMONTH=11;BYDAY=1SU
DTSTART:20071104T020000
TZNAME:CST
TZOFFSETTO:-0600
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
SUMMARY:Striderite Odd Behavior
X-MICROSOFT-CDO-OWNERAPPTID:1636009948
PRIORITY:5
CLASS:PUBLIC
X-MICROSOFT-CDO-IMPORTANCE:1
ORGANIZER;CN="Bivens, Aaron":MAILTO:[email protected]
X-MICROSOFT-CDO-BUSYSTATUS:TENTATIVE
TRANSP:OPAQUE
ATTACH;VALUE=URI:CID:[email protected]
UID:040000008200E00074C5B7101A82E0080000000070C0169E6171CD01000000000000
000010000000A1E12E37B7A50748845FD500AA823A41
DTSTART;TZID=US/Central:20120803T130000
SEQUENCE:1
X-MICROSOFT-CDO-INTENDEDSTATUS:BUSY
X-MICROSOFT-CDO-APPT-SEQUENCE:1
LOCATION:Conference Bridge (1-877-703-8557 Passcode 4547612823)
X-MICROSOFT-CDO-INSTTYPE:0
ATTENDEE;CN="T, Parvathy";CUTYPE=INDIVIDUAL;PARTSTAT=NEEDS-ACTION;ROLE=R
EQ-PARTICIPANT;RSVP=TRUE:MAILTO:[email protected]
om
ATTENDEE;CN="Nigbor, Sara";CUTYPE=INDIVIDUAL;PARTSTAT=NEEDS-ACTION;ROLE=
REQ-PARTICIPANT;RSVP=TRUE:MAILTO:[email protected]
ATTENDEE;CN="[email protected]";CUTYPE=INDIVIDUAL;PARTSTAT=ACCEPTED;R
OLE=REQ-PARTICIPANT:MAILTO:[email protected]
ATTENDEE;CN="Ramasamy, Sivam";CUTYPE=INDIVIDUAL;PARTSTAT=NEEDS-ACTION;RO
LE=REQ-PARTICIPANT;RSVP=TRUE:MAILTO:[email protected]
ATTENDEE;CN="Devon Hillard ([email protected])";CUTYPE=INDIVIDUAL;PARTS
TAT=NEEDS-ACTION;ROLE=REQ-PARTICIPANT;RSVP=TRUE:MAILTO:[email protected]
m
STATUS:CONFIRMED
DTSTAMP:20120803T180122Z
CREATED:20120803T180214Z
X-MICROSOFT-CDO-ALLDAYEVENT:FALSE
DTEND;TZID=US/Central:20120803T133000
DESCRIPTION:Bridge # 1-877-703-8557\nCode 4547612823\n\nThis call is the
discuss the email I sent out this morning regarding forms behaving diff
erently on different instances on Striderite.\n\n
BEGIN:VALARM
X-WR-ALARMUID:CD335498-C261-4898-9F02-85DC670E606A
UID:CD335498-C261-4898-9F02-85DC670E606A
TRIGGER:-PT15M
X-APPLE-DEFAULT-ALARM:TRUE
ATTACH;VALUE=URI:Basso
ACTION:AUDIO
END:VALARM
END:VEVENT
END:VCALENDAR
>>>> Request complete at: 1344020922.763 (elapsed: 2.1 ms)
<<<< Response sending at: 1344020922.809 (elapsed: 47.6 ms)
HTTP/1.1 412 Precondition Failed
Content-Length: 225
Strict-Transport-Security: max-age=600
Server: CalendarServer/4.1(CalendarServerv16.94.6) Twisted/12.0.0 TwistedWeb/9.0.0
DAV: 1, access-control, calendar-access, calendar-schedule, calendar-auto-schedule, calendar-availability, inbox-availability, calendar-proxy, calendarserver-private-events, calendarserver-private-comments, calendarserver-sharing, calendarserver-sharing-no-scheduling, calendar-query-extended, calendar-default-alarms, addressbook, extended-mkcol, calendarserver-principal-property-search
Date: Fri, 03 Aug 2012 19:08:42 GMT
Content-Type: text/html;charset=utf-8
Connection: close
<html>
          <head>
              <title>412 Precondition Failed</title>
          </head>
        <body>
            <h1>Precondition Failed</h1>
            A precondition evaluated to false.
        </body>
    </html>
<<<< Response complete at: 1344020922.810 (elapsed: 48.5 ms)
Appreciate you looking at this.

Admin Server satrtup failing with the error User weblogic is not permitted to boot the server

Hi ,
The admin server is not coming up , its failing with the below error.
<May 25, 2014 10:28:35 PM PDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1010)
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
        at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
        at weblogic.security.SecurityService.start(SecurityService.java:141)
        at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
        Truncated. see log file for complete stacktrace.
I have tried resetting the password as per below link , it hasn't helped. Still facing issue. Please help
http://www.weblogic-tips.com/wls-security/
Thanks,
Pradeep

Creating New user did not help . Still same error.
<May 26, 2014 8:56:31 PM PDT> <Critical> <Security> <BEA-090404> <User weblogicNew is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.>
<May 26, 2014 8:56:31 PM PDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User weblogicNew is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
weblogic.security.SecurityInitializationException: User weblogicNew is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1010)
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
        at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
        at weblogic.security.SecurityService.start(SecurityService.java:141)
        at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
        Truncated. see log file for complete stacktrace
>
<May 26, 2014 8:56:31 PM PDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>"

Oracle calendar standalone R2 fails with Sun ONE 5.2

I am trying to install Oracle Collaboration Suite R2 on a Windows 2000 server platform.
have followed steps outlined in document for installing oracle collaboration suite stand alone on Windows.
All proceeds well, until step 15.
Configuration assistant failed.
OUTPUT:
Starting to execute configuration assistants
Launched configuration assistant 'Calendar Server Configuration Assistant for Windows'
Tool type is: Optional.
The command being spawned is: 'd:\ocs\ocal/ca/RunCA.bat -noprompt'
Start output from spawned process:
**ERROR** Unable to create the Resource Relative DN.
Please create it manually in the Directory Server.
java.io.IOException: d:\ocs\ocal\bin\uniinstalltools: returned 1
     at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(OCalConfig.java:1762)
     at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(OCalConfig.java:1710)
     at oracle.calendar.server.configuration.OCalConfig.setupExtDirServ(OCalConfig.java:1391)
     at oracle.calendar.server.configuration.OCalConfig.setDsSpecInfo(OCalConfig.java:1438)
     at oracle.calendar.server.configuration.OCalConfig.run(OCalConfig.java:769)
     at oracle.calendar.server.configuration.OCalConfig.main(OCalConfig.java:81)
**ERROR** Unable to create the Resource Relative DN.
Please create it manually in the Directory Server.
java.io.IOException: d:\ocs\ocal\bin\uniinstalltools: returned 1
     at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(OCalConfig.java:1762)
     at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(OCalConfig.java:1710)
     at oracle.calendar.server.configuration.OCalConfig.setupExtDirServ(OCalConfig.java:1403)
     at oracle.calendar.server.configuration.OCalConfig.setDsSpecInfo(OCalConfig.java:1438)
     at oracle.calendar.server.configuration.OCalConfig.run(OCalConfig.java:769)
     at oracle.calendar.server.configuration.OCalConfig.main(OCalConfig.java:81)
**ERROR** Unable to initialize connection to directory
uniaddnode: Unable to complete request. Directory Server may be down.
**ERROR** Could not create the Calendar node.
java.io.IOException: d:\ocs\ocal\bin\uniaddnode: returned 1
     at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(OCalConfig.java:1762)
     at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(OCalConfig.java:1710)
     at oracle.calendar.server.configuration.OCalConfig.createNode(OCalConfig.java:1694)
     at oracle.calendar.server.configuration.OCalConfig.run(OCalConfig.java:858)
     at oracle.calendar.server.configuration.OCalConfig.main(OCalConfig.java:81)
java.lang.Exception: uniaddnode failure
End output from spawned process.
Have tried the RunCA.bat manually. FAILS
Have tried "uniaddnode" manually. FAILS
First updated the schema of the Directory server. Can verify that the ctcal entries exists.
Sun ONE Directory Server 5.2 is up and running. Fresh install.
"cn=Directory Manager" can log in.
Restarted Sun ONE Directory Server. Same Result, FAILS
Have tried another Directory manager. FAILS
password correct for cn=Directory Manager.
What am I missing?
Have checked the LDAP logs of server.
uniaddnode isn't even attempting to query the LDAP. If there is no query than there can be no bind. If there is no bind there can be no entries and modifications.
TAR is open in metalink.
CSR is still investigating. They are giving me the "run-around". I can duplicate the problem on ANY server at ANY time.
Problem is independent of Sun ONE Directory Server 5.2 and iPlanet Directory Server 5.1 and 5.1SP3.
Help needed

try this
1. edit the hosts file & add the hostname & ip address of the machine
2. run $ORACLE_HOME/local/bin/uniaddnode -n 1
3. retry the configuration assistant

SQL Server installation failed with Exit code (Decimal): -2068643839

Overall summary:
Final result:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal):           -2068643839
Exit facility code:            1203
Exit error code:               1
Exit message:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time:                    2009-10-20 23:58:46
End time:                      2009-10-21 00:56:30
Requested action:              Install
Log with failure:              C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091020_235135\Detail.txt
Exception help link:           http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.1600.22%26EvtType%3d0xBE029E38%400x12C2466D
Machine Properties:
Machine name:                  ADI
Machine processor count:       2
OS version:                    Windows XP
OS service pack:               Service Pack 3
OS region:                     România
OS language:                   English (United States)
OS architecture:               x86
Process architecture:          32 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID                    Feature                                  Language             Edition              Version         Clustered
Package properties:
Description:                   SQL Server Database Services 2008
SQLProductFamilyCode:          {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName:                   SQL2008
Type:                          RTM
Version:                       10
SPLevel:                       0
Installation location:         d:\e9d5147ebef49a28bb15\x86\setup\
Installation edition:          EXPRESS_ADVANCED
User Input Settings:
ACTION:                        Install
ADDCURRENTUSERASSQLADMIN:      True
AGTSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD:                *****
AGTSVCSTARTUPTYPE:             Disabled
ASBACKUPDIR:                   Backup
ASCOLLATION:                   Latin1_General_CI_AS
ASCONFIGDIR:                   Config
ASDATADIR:                     Data
ASDOMAINGROUP:                 <empty>
ASLOGDIR:                      Log
ASPROVIDERMSOLAP:              1
ASSVCACCOUNT:                  <empty>
ASSVCPASSWORD:                 *****
ASSVCSTARTUPTYPE:              Automatic
ASSYSADMINACCOUNTS:            <empty>
ASTEMPDIR:                     Temp
BROWSERSVCSTARTUPTYPE:         Disabled
CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091020_235135\ConfigurationFile.ini
ENABLERANU:                    True
ERRORREPORTING:                False
FEATURES:                      SQLENGINE,REPLICATION,SSMS
FILESTREAMLEVEL:               0
FILESTREAMSHARENAME:           <empty>
FTSVCACCOUNT:                  <empty>
FTSVCPASSWORD:                 *****
HELP:                          False
INDICATEPROGRESS:              False
INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR:           C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR:             <empty>
INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
INSTANCEID:                    SQLEXPRESS
INSTANCENAME:                  SQLEXPRESS
ISSVCACCOUNT:                  NT AUTHORITY\NetworkService
ISSVCPASSWORD:                 *****
ISSVCSTARTUPTYPE:              Automatic
MEDIASOURCE:                   d:\e9d5147ebef49a28bb15\
NPENABLED:                     0
PID:                           *****
QUIET:                         False
QUIETSIMPLE:                   True
RSINSTALLMODE:                 FilesOnlyMode
RSSVCACCOUNT:                  <empty>
RSSVCPASSWORD:                 *****
RSSVCSTARTUPTYPE:              Automatic
SAPWD:                         *****
SECURITYMODE:                  SQL
SQLBACKUPDIR:                  <empty>
SQLCOLLATION:                  Romanian_CI_AS
SQLSVCACCOUNT:                 NT AUTHORITY\Network Service
SQLSVCPASSWORD:                *****
SQLSVCSTARTUPTYPE:             Automatic
SQLSYSADMINACCOUNTS:           <empty>
SQLTEMPDBDIR:                  <empty>
SQLTEMPDBLOGDIR:               <empty>
SQLUSERDBDIR:                  <empty>
SQLUSERDBLOGDIR:               <empty>
SQMREPORTING:                  False
TCPENABLED:                    0
X86:                           False
Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091020_235135\ConfigurationFile.ini
Detailed results:
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091020_235135\Detail.txt
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091020_235135\Detail.txt
Feature:                       Management Tools - Basic
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091020_235135\SystemConfigurationCheck_Report.htm

Hi All,
I am also having same issue:-
long time back i installed default sql 2008 with sp1 in win2008 R2 server in drive(system data files) M:\, but some time back windows team deleted all the system datafiles from drive, now when i am trying to uninstall\install default sql 2008
getting below error. manually i have removed all the mssqlserver,version entry from registry and deleted all the remaining folder from drive C:\, but still error is comming.
Overall summary:
Final result:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal):           -2068643839
Exit facility code:            1203
Exit error code:               1
Exit message:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time:                    2011-06-12 23:14:10
End time:                      2011-06-12 23:20:59
Requested action:              Install
Log with failure:              C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110612_230738\Detail.txt
Exception help link:           http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.1600.22%26EvtType%3d0xF57C3D6F%400xFB92A9BB
Machine Properties:
Machine name:                  XXXXXXXXX
Machine processor count:       8
OS version:                    Windows Server 2008
OS service pack:
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
Package properties:
Description:                   SQL Server Database Services 2008
SQLProductFamilyCode:          {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName:                   SQL2008
Type:                          RTM
Version:                       10
SPLevel:                       0
Installation location:         D:\sql dump\SQL 2008 EE 64 Bit\x64\setup\
Installation edition:          ENTERPRISE
User Input Settings:
ACTION:                        Install
ADDCURRENTUSERASXXXXXXXXX:      False
AGTSVCACCOUNT:                 XXXXXXXXX\XXXXXX
AGTSVCPASSWORD:                *****
AGTSVCSTARTUPTYPE:             Manual
ASBACKUPDIR:                   Backup
ASCOLLATION:                   Latin1_General_CI_AS
ASCONFIGDIR:                   Config
ASDATADIR:                     Data
ASDOMAINGROUP:                 <empty>
ASLOGDIR:                      Log
ASPROVIDERMSOLAP:              1
ASSVCACCOUNT:                  <empty>
ASSVCPASSWORD:                 *****
ASSVCSTARTUPTYPE:              Automatic
ASSYSADMINACCOUNTS:            <empty>
ASTEMPDIR:                     Temp
BROWSERSVCSTARTUPTYPE:         Disabled
CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110612_230738\ConfigurationFile.ini
ENABLERANU:                    False
ERRORREPORTING:                False
FEATURES:                      SQLENGINE,REPLICATION,FULLTEXT
FILESTREAMLEVEL:               0
FILESTREAMSHARENAME:           <empty>
FTSVCACCOUNT:                  NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD:                 *****
HELP:                          False
INDICATEPROGRESS:              False
INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR:             <empty>
INSTANCEDIR:                   D:\Program Files\Microsoft SQL Server\
INSTANCEID:                    MSSQLSERVER
INSTANCENAME:                  MSSQLSERVER
ISSVCACCOUNT:                  NT AUTHORITY\NetworkService
ISSVCPASSWORD:                 *****
ISSVCSTARTUPTYPE:              Automatic
MEDIASOURCE:                   D:\sql dump\SQL 2008 EE 64 Bit\
NPENABLED:                     0
PID:                           *****
QUIET:                         False
QUIETSIMPLE:                   False
RSINSTALLMODE:                 FilesOnlyMode
RSSVCACCOUNT:                  <empty>
RSSVCPASSWORD:                 *****
RSSVCSTARTUPTYPE:              Automatic
SAPWD:                         *****
SECURITYMODE:                  SQL
SQLBACKUPDIR:                  <empty>
SQLCOLLATION:                  SQL_Latin1_General_CP850_BIN2
SQLSVCACCOUNT:                 xxxxxxx\xxxxxxxx
SQLSVCPASSWORD:                *****
SQLSVCSTARTUPTYPE:             Automatic
SQLSYSADMINACCOUNTS:           xxxxxxx\xxxxxxxx
SQLTEMPDBDIR:                  <empty>
SQLTEMPDBLOGDIR:               <empty>
SQLUSERDBDIR:                  <empty>
SQLUSERDBLOGDIR:               <empty>
SQMREPORTING:                  False
TCPENABLED:                    1
X86:                           False
Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110612_230738\ConfigurationFile.ini
Detailed results:
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0xFB92A9BB
Configuration error description: The system cannot find the path specified
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110612_230738\Detail.txt
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0xFB92A9BB
Configuration error description: The system cannot find the path specified
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110612_230738\Detail.txt
Feature:                       Full-Text Search
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0xFB92A9BB
Configuration error description: The system cannot find the path specified
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110612_230738\Detail.txt
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110612_230738\SystemConfigurationCheck_Report.htm
india

Time Machine backups to OS X Server intermittently failing with error 21

I have a Mac Mini running OS X Server, with two USB drives connected and selected within OS X Server as Time Machine backup destinations. I have an iMac and a Macbook Air, both of which are using Time Machine to backup themselves up to the Time Machine Service on the server (all are running the latest version of Mavericks).
Intermittently, the iMac backup fails. The iMac's console log shows:
Aug 23 13:55:34 Nigels-iMac.local com.apple.backupd[15418]: Failed to eject volume /Volumes/Backups-1 (FSVolumeRefNum: -141; status: -47; dissenting pid: 0)
Aug 23 13:55:34 Nigels-iMac.local com.apple.backupd[15418]: Waiting 60 seconds and trying again.
Aug 23 13:56:06 Nigels-iMac.local mds[72]: (Normal) Volume: volume:0x7fa702995000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Backups-1
Aug 23 13:56:45 Nigels-iMac.local com.apple.backupd[15418]: Network destination already mounted at: /Volumes/Backups-1
Aug 23 13:57:29 Nigels-iMac.local com.apple.backupd[15418]: Quota in effect for '/Volumes/Backups-1': Zero KB
Aug 23 13:58:16 Nigels-iMac.local com.apple.backupd[15418]: Failed to eject volume /Volumes/Backups-1 (FSVolumeRefNum: -141; status: -47; dissenting pid: 0)
Aug 23 13:58:16 Nigels-iMac.local com.apple.backupd[15418]: Giving up after 3 retries.
Aug 23 13:58:16 Nigels-iMac.local com.apple.backupd[15418]: Backup failed with error 21: 21
The Mac Mini console log shows nothing apparently wrong.
Restarting the server (not the iMac) clears the problem and the iMac will then once again backup to the server for some time (e.g. a day).
There are two USB drives, one for each backup sparse bundle and although the two disks have different names in the Finder, OS X Server has named them both Backup (one is shown as 'Backup' and the other as 'Backup-1' in the Time Machine Services Backups tab).
I am wondering whether the failure occurs when coincidentally the iMac and the Macbook both try to back up at the same moment. Any advice about how to isolate the problem, or a solution would be gratefully received!

1. This procedure is a diagnostic test, to be carried out on the server. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

How to sync Google calendar busy/free-time with iOS calendars?

A friend and I want to share our busy / free-time. We've successfully set it up and sharing, and sharing works fine on our PC / Mac laptops via Outlook and iCal respectively. Same goes for webcal. While my friend who has an Android phone can also see my busy / free-time on his phone's calendar application, I cannot select his calendar for syncing to my iOS calendar via "https://www.google.com/calendar/syncselect". When my friend's calendar security is set to "share busy / free-time only", his calendar shows up on my calendar list on the syncselect page as not available for syncing. When he shares his detailed view, I can select it for syncing.
Is there a work-around so that I can see his busy / free-time on my iOS calendar just like I see it on my Mac iCal and on web-calendar? Appreciate input here ... Thank you.

I'm afraid that isn't possible. iCloud will not sync your Google calendar and Google will not sync your iCloud calendar. They are entirely separate systems. If you want to sync your Google calendar with your devices, add your Gmail account to them (Settings>Mail,Contacts,Calendars>Add Account>Google) and turn Calendar on. Your Google calendar will then appear alongside your iCloud calendar in the Calendars app on your devices.

PureFTP and //server/volume fails with many clients

OES2 SP2 and Novell FTP/PureFTP
Remote Browser paths fail with double slash //
#cd //server/volume/data fails with many clients only Windows/Linux
Command prompts works. IE and FireFox all fail.
Works with Windows/Linux command line ftp.
Thanks

Originally Posted by DrumDude
OES2 SP2 and Novell FTP/PureFTP
Remote Browser paths fail with double slash //
#cd //server/volume/data fails with many clients only Windows/Linux
Command prompts works. IE and FireFox all fail.
Works with Windows/Linux command line ftp.
Thanks
I am taking "fails with many clients" to mean that the method fails with "certain clients". (At first I thought maybe you meant, "once you have a lot of clients connected, it fails").
This is due to limitations of Web Browsers as FTP clients.
Even within the "standard" FTP world, it is generally accepted that Web Browsers make lousy FTP clients. This is especially true for use of this feature, which is definitely not "standard". Web Browsers make so many assumptions about what to do with a URL that you type in, or how to build the file links to what is found at the destination, that they just cannot make reasonable use of this special feature.
This FTP "remote server navigation" feature was brought over from NetWare. Web Browsers couldn't make use of it then, either.
I expect this navigation feature to work on:
- command line clients
- GUI FTP clients, *if* they allow you to enter an explicit command so you can enter the "cd" command manually, rather than just click to navigate.

Calendar server rewrites fail

Cal server 5.1, Portal 3, sp3a, Solaris 8.
It is possible to launch Calendar Express and login via the Portal Gateway, with all the url rewriting apparently working fine. However, once logged in, it is not possible to access any functions - clicking on the links to change the view, or add a task for example, just cause a window to launch and time out.

Here is the solution:
1. Add the following to the Rewrite JavaScript Function Parameters list.
load:,y
open:y
loadtab:,y,
2. Add the "window.top.location.href" rule to the Rewrite JavaScript Variables in URLs list.
3. Add the "urlstring" rule to the Rewrite JavaScript Variables Function list.
4. Log in as superuser.
5. Change directories to the inst_dir/SUNWics5/bin/config directory.
6. Edit the ics.conf file, and change the following line:
service.http.ipsecurity=no
7. Stop, and start the calendar server with the following commands:
# inst_dir/SUNWics5/bin/stop-cal
# inst_dir/SUNWics5/bin/start-cal

Move Virtual Machine from Hyper-V Server 2008 R2 SP1 to Hyper-V Server 2012 fails with Error 2901

I have six Hyper-V 2008 R2 SP1 servers and two Hyper-V 2012 servers. I am running SCVMM 2012 SP1. I am trying to use "move virtual machine" from within SCVMM to move VMs from a 2008 host to a 2012 host. I have tried different VMs on different hosts
and they all fail with this error:
==========
Error (2901)
The operation did not complete successfully because of a parameter or call sequence that is not valid.
The parameter is incorrect (0x80070057)
Recommended Action
Ensure that the parameters are valid, and then try the operation again.
==========
I have successfully created a VM on one of the 2012 hosts and moved it to the other 2012 hosts. I can move VMs from 2008 host to 2008 host. I just cannot move VMs from 2008 host to 2012 host.
Does SCVMM 2012 SP1 not support moving VMs from Hyper-V 2008 to Hyper-V 2012?

Hello Kevin,
Have you got an resolution yet ? Do you have latest update roll up pack applied to SCVMM 2012 SP1?
With SCVMM 2012 SP1 " Running VMs (Live Migartion) and VMs which are in Saved state or having checkpoints can not be migrated from 2008R2 host to 2012 Host "
above was fixed in SCVMM 2012 Update Roll up 1
Apart this please check the approx. size of data (VHDs) which will get transferred over the network , If you have large files chances are more to get such errors.
Thanks
~NY

MDM Server Enrollment Fails with Nginx Proxy

Hello everyone, I'm at my wits end trying to configure nginx as a transparent proxy to my OS X Server (in virtualbox) running our mdm service. Without nginx in the mix the mdm server works properly, and I can performce remote device enrollment and management, but I host multiple servers on the same network, and need to be able to proxy to multiple ips and ports using nginx.
The setup without nginx:
I'm using external DNS for my fqdn, mdm.servername.com, which is correctly resolving to my public ip address. I have my firewall successfully forwarding ports 443, and 1640 to my mdm server at private ip, 10.0.1.60. I have the OS X server DNS disabled, and I'm also using mdm.servername.com as my OS Server's hostname. I set mdm.servername.com to resolve to 127.0.0.1 in /etc/hosts in order to build the open directory, and then I removed this entry from /etc/hosts. Don't know if this is one of the issues. I can access http://mdm.servername.com/mydevices from outside of the network, and enroll my ipad without problems. Everything is working properly until I introduce nginx.
The setup with nginx:
Again using external DNS for my fqdn, mdm.servername.com. I have nginx running on private ip 10.0.1.50, and I'm forwarding ports 443 and 1640 to 10.0.1.50. I have the OS X mdm server running on ip 10.0.1.50. The mdm server has DNS disabled, and the mdm server is also using mdm.servername.com as the OS hostname. I can still access the website portion of mdm (https://mdm.servername.com/mydevices), I can install the Trust Profile without any issues, but when I try to enroll my iPad from outside the network, it successfully "enrolls the certificate", but when it's "Installing Profile" it evenutally times out. I see the progression of api calls in the nginx access logs:
Nginx access.log
173.171.23.81 - - [16/Nov/2013:19:56:47 -0500] "GET /scep/?operation=GetCACert&message=Device%20Management%20Identity%20Certificate HTTP/1.1" 200 1126 "-" "profiled/1.0 CFNetwork/672.0.8 Darwin/14.0.0"
173.171.23.81 - - [16/Nov/2013:19:56:48 -0500] "GET /scep/?operation=GetCACaps&message=Device%20Management%20Identity%20Certificate HTTP/1.1" 200 52 "-" "profiled/1.0 CFNetwork/672.0.8 Darwin/14.0.0"
173.171.23.81 - - [16/Nov/2013:19:56:49 -0500] "POST /scep/?operation=PKIOperation HTTP/1.1" 200 3046 "-" "profiled/1.0 CFNetwork/672.0.8 Darwin/14.0.0"
173.171.23.81 - - [16/Nov/2013:19:58:20 -0500] "PUT /devicemanagement/api/device/mdm_checkin HTTP/1.1" 504 191 "-" "MDM/1.0"
The 504 error on the PUT happens about 30 seconds after the iPad already reports the profile installation failed.
Nginx error.log
2013/11/16 19:58:20 [error] 7983#0: *10 upstream timed out (110: Connection timed out) while reading response header from upstream, client: xxx.xxx.xx.xx, server: mdm.servername.com, request: "PUT /devicemanagement/api/device/mdm_checkin HTTP/1.1", upstream: "https://10.0.1.60:443/devicemanagement/api/device/mdm_checkin", host: "mdm.servername.com"
So nginx is reporting a timeout talking to the mdm server for the PUT checkin action...
On the MDM Server the Apache Logs indicate connection errors also
Apache access_log
mdm.servername.com 10.0.1.50 - - [16/Nov/2013:19:56:47 -0500] "PUT /devicemanagement/api/device/mdm_checkin HTTP/1.0" 403 - "-" "MDM/1.0"
Apache error_log
[Sat Nov 16 19:56:22 2013] [error] (61)Connection refused: proxy: HTTP: attempt to connect to 127.0.0.1:3328 (127.0.0.1) failed
[Sat Nov 16 19:56:22 2013] [error] ap_proxy_connect_backend disabling worker for (127.0.0.1)
[Sat Nov 16 19:56:22 2013] [error] (61)Connection refused: proxy: HTTP: attempt to connect to 127.0.0.1:3329 (127.0.0.1) failed
[Sat Nov 16 19:56:22 2013] [error] ap_proxy_connect_backend disabling worker for (127.0.0.1)
[Sat Nov 16 19:56:22 2013] [error] (61)Connection refused: proxy: HTTP: attempt to connect to 127.0.0.1:3327 (127.0.0.1) failed
[Sat Nov 16 19:56:22 2013] [error] ap_proxy_connect_backend disabling worker for (127.0.0.1)
[Sat Nov 16 19:56:22 2013] [error] (61)Connection refused: proxy: HTTP: attempt to connect to 127.0.0.1:3325 (127.0.0.1) failed
[Sat Nov 16 19:56:22 2013] [error] ap_proxy_connect_backend disabling worker for (127.0.0.1)
[Sat Nov 16 19:56:22 2013] [error] (61)Connection refused: proxy: HTTP: attempt to connect to 127.0.0.1:3326 (127.0.0.1) failed
[Sat Nov 16 19:56:22 2013] [error] ap_proxy_connect_backend disabling worker for (127.0.0.1)
[Sat Nov 16 19:56:22 2013] [error] (61)Connection refused: proxy: HTTP: attempt to connect to 127.0.0.1:3324 (127.0.0.1) failed
[Sat Nov 16 19:56:22 2013] [error] ap_proxy_connect_backend disabling worker for (127.0.0.1)
[Sat Nov 16 19:56:22 2013] [error] (61)Connection refused: proxy: HTTP: attempt to connect to 127.0.0.1:3322 (127.0.0.1) failed
[Sat Nov 16 19:56:22 2013] [error] ap_proxy_connect_backend disabling worker for (127.0.0.1)
[Sat Nov 16 19:56:22 2013] [error] (61)Connection refused: proxy: HTTP: attempt to connect to 127.0.0.1:3323 (127.0.0.1) failed
[Sat Nov 16 19:56:22 2013] [error] ap_proxy_connect_backend disabling worker for (127.0.0.1)
[Sat Nov 16 19:58:17 2013] [error] [client 10.0.1.50] Re-negotiation handshake failed: Not accepted by client!?
I'm assuming I have something misconfigured with nginx, but I'm not smart enough to put all these pieces together for a solution...Hopefully one you more capaple guys or gals can help me out...
Nginx Config
user www-data;
worker_processes 4;
pid /run/nginx.pid;
events {
        worker_connections 768;
http {
tcp_nopush on;
tcp_nodelay on;
keepalive_timeout 65;
types_hash_max_size 4096;
default_type application/octet-stream;
ssl_certificate     /etc/nginx/ssl/servername.com/_.servername.com.combined.crt;
ssl_certificate_key /etc/nginx/ssl/servername.com/_.servername.com.key;
access_log /var/log/nginx/access.log;
error_log /var/log/nginx/error.log;
gzip on;
gzip_disable "msie6";
server {
    listen        443 ssl;
    listen        1640;
    server_name   mdm.servername.com;
    location / {
      proxy_pass      $scheme://10.0.1.60:$server_port$request_uri;
      sendfile off;
      proxy_set_header   Host                   $host;
      proxy_set_header   X-Real-IP            $remote_addr;
      proxy_set_header   X-Forwarded-For $proxy_add_x_forwarded_for;
      proxy_max_temp_file_size 0;
      #this is the maximum upload size
      client_max_body_size       10m;
      client_body_buffer_size    128k;
      proxy_connect_timeout      90;
      proxy_send_timeout         90;
      proxy_read_timeout         90;
      proxy_buffer_size          4k;
      proxy_buffers              4 32k;
      proxy_busy_buffers_size    64k;
      proxy_temp_file_write_size 64k;
Additional info:
I have a wildcard ssl cert from go daddy that nginx is using for ssl, and I'm also using this for the websites server on OS X Server. I'm using the intermediate cert that Server generates for signing the configuration profile.
Thanks in advance for any help you can provide.

Thanks for the input Stephen! I am having trouble recieving application pushes on my guest network, I'm going to try and open the ports like you suggested.
Opening ports 443, and 1640 are definitely a must on the MDM server, or enrollment from the guest network will not succeed.
I noticed a lot of action in the /Library/Logs/ProfileManager/php.log on my MDM server, whenever I bypass nginx, and successfully enroll, so I'm guessing there needs to by some fastcgi proxying in the nginx config block:
1::Nov 18 10:52:55.329 [30721] {require_once (mdm_enroll.php:11)} vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv - POST mdm_enroll
1::Nov 18 10:53:00.499 [30721] {GetMDMACLFromUserAgentHeader (mdm_enroll.php:40)} iOS version 7.0
1::Nov 18 10:53:06.400 [30721] {SendFinalOutput (mdm_enroll.php:69)} Sent Final Output (10933 bytes)
1::Nov 18 10:53:06.400 [30721] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - /devicemanagement/mdm/mdm_enroll
0::Nov 18 10:53:06.419 [30721] {SendFinalOutput (mdm_enroll.php:69)} Completed in 11303ms | 200 OK [https://mdm.servername.com/devicemanagement/mdm/mdm_enroll]
1::Nov 18 10:53:22.673 [30722] {LogElapsedTime (common.php:74)} Time since script start: 441us [https://mdm.servername.com/devicemanagement/api/device/mdm_checkin]
1::Nov 18 10:53:22.720 [30722] {require_once (mdm_checkin.php:11)} vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv - PUT mdm_checkin
0::Nov 18 10:53:22.751 [30722] checkin: 'Authenticate'
1::Nov 18 10:53:23.046 [30722] {SendFinalOutput (mdm_checkin.php:145)} Sent Final Output (0 bytes)
1::Nov 18 10:53:23.046 [30722] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - /devicemanagement/mdm/mdm_checkin
0::Nov 18 10:53:23.046 [30722] {SendFinalOutput (mdm_checkin.php:145)} Completed in 373ms | 200 OK [https://mdm.servername.com/devicemanagement/api/device/mdm_checkin]
1::Nov 18 10:53:28.220 [32005] {LogElapsedTime (common.php:74)} Time since script start: 476us [https://mdm.servername.com/devicemanagement/api/device/mdm_checkin]
1::Nov 18 10:53:28.220 [32005] {require_once (mdm_checkin.php:11)} vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv - PUT mdm_checkin
0::Nov 18 10:53:28.220 [32005] checkin: 'TokenUpdate'
1::Nov 18 10:53:28.225 [32005] {Target_for_incoming_request (target.php:210)} Found target iOS: <''[10](OWNER:User[9])>1::Nov 18 10:53:28.501 [32005] {SendFinalOutput (mdm_checkin.php:145)} Sent Final Output (0 bytes)
1::Nov 18 10:53:28.501 [32005] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - /devicemanagement/mdm/mdm_checkin
0::Nov 18 10:53:28.501 [32005] {SendFinalOutput (mdm_checkin.php:145)} Completed in 281ms | 200 OK [https://mdm.servername.com/devicemanagement/api/device/mdm_checkin]
I tried adding the following location section into the config, but still no luck:
location /devicemanagement/api/device/mdm_checkin {
    fastcgi_pass 10.0.1.49:$server_port;
    fastcgi_index index.php;
    include fastcgi_params;

Why can't I see the calendar in list view with iOS 7.1?

Since I've upgraded to iOS 7.1 I can't see my calendar in list view. When you click on the search button as you used to, it only works as a search rather than pulling up the list view. If you search for a letter then you get a list of all entries that have that letter included but not the entire list of entries. I'm lost without this, how do I get around it?

to the left of the search button in day view are dots with lines. Click that. You should see the list view.

Bare metal restore of full server backup fails with RPC error 0x800706BA (server 2012)

With Windows Server 2012, after creating a successful windows server backup (full server), I am unable to do a bare metal restore of the system.
EFI System Partition, C:, D: are the volumes on a single array (Raid 5).
Loading WinRE and launching re-image, the full server restore stops after completing the C: restore just after beginning the D: drive restore (data volume) with the error with the message about RPC error 0x800706BA, unavailable.
The system will not boot as a result of the failure.
What may be causing this?
[edit]
I think I have two things working against me here... one, Volume Shadow Copy service wasn't running in WinPE and two.. the D: volume contains data deduplication.
I think this is causing some of my problems.
Is there an additional service that I need to start in WinPE to get a volume that was deduplicated restored perhaps using wbadmin?

Hi,
Thanks for the reply Shaon.
The hardware system is identical; however, I am increasing storage capacity from 12TB to 16TB. Basically, the system is the same, just new hard drives (4x4TB versus 4x3TB). Drives are all identical enterprise class drives and I am actually using
the same system (backup, swap drives then restore).
I tried both using the WinRE restore (re-image) with the backup set, and tried using wbadmin. Both produce same RPC unavailable messages (although using the GUI based tool via WinRE provides the additional error code #).
I do not have any idea what to look at to try to figure this one out.
[edit]
I was just informed of this posting:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/147efccc-e0e9-4458-852e-c3a44ae5cb64/the-system-image-restore-failed-error-details-he-rpc-server-is-unavailable-0x800706ba?forum=windowsbackup
and in my case, this lab server does in fact act also as a DC as well as a file server... do I need to spin up a secondary controller (perhaps in a VM on another machine) to do this restore?

Calendar Server 7u2 fails with iOS 5

Similar Messages

Maybe you are looking for