Calendar Server and Email Server on Same Machine - Email Issue

Hi.
I've installed email and calendar on the same host. The email domain for test purposes is the name of the machine. I noticed in the configuration guide, it says that if you put the calendar server and email server on the same machine you need to configure sendmail.cf and modify incoming rules in order to get email reminders from Calendar to Email. I have done this but am still not able to. I get the emails kicked back to root and they say:
553 5.3.5 System Config Errors
553 5.3.5 <machine name> config error: mail loops back to me (MX problem?)
Has someone seen this before?
Thank You,
Matt

Hi Russ,
We have the same problem as Matt.
We have properly set up OCS Email it works well both inside and outside our network.
The only thing that appears not to be working is the email notification capabilities of OCS Calendar.
We have changed sendmail.cf as stated in the documentantion.
we are using -
RedHat Advanced Server 2.1,
sendmail 8.11.6
bind 9.1.3
I would be very gratefull of any information on this, as we're out of ideas...

Similar Messages

Infrastructure and forms server into same machine

Dear friends,
I am faching strange problem
, I install 9ias(9.0.2.0.1) infrastucture and form server into same machine,
after sucessfull installation it is mention infrastucture will run the port 7777 and form will 7778,
but after just installation it work into these ports but when i restats the system then port of infrastucture change and it is 7779.
now if i run forms the it give internal error 500,
then I stop fist infrastucture http server then http server of form
and again first start infrastucture hhtp server then form http server
now agin infrastructure server port id 7779(insted of 7777)
but now my form work properly.
every day i do this job , but some time this method fails then i have to again install server and have to repeate above mention job .
pls help me
With regards
Siddharth Singh
[email protected]

Mid-tier listens on a lot of ports. On a std install (with both Infra and Mid-tier) Web-cache listens on port 7778 "in front of" httpd for OHS on 7779. So perhaps you forget to start web-cache? (run from BI home: webcachectl)
Perhaps the problem with Forms is related to X Toolkit?

I want to run IIS and Form Server on same machine

Dear follows
I have problems , porblems is that i want to run IIS and Form
Server at same machine but i m facing some problems so please
inform me right proceduers to run this services at same machnine
now i m using Windows NT .
My secone problems is that i want to send emai via oracle
reports , actuall condition is that i have oracle report and i
want to add button and behind this boutton i want to add trigger
to send this report as a emai to client as txt/html format.

There shouldn't be any problem running both forms server and IIS
on the same machine. Just make sure the ports that are used are
different. IIS's default port is 80, so either change this port
number or change it for the Forms server's web listener.
You can send reports to email if you use DESTYPE=MAIL.

Replace a 2003 (not R2) File Server with a 2012R2 files server and preferably keep the same machine name and IP when finished

I am wanting to replace a 2003 (not R2) File Server with a 2012R2 file server and preferably keep the same machine name and IP when finished. For the moment I just need some "high level" guidance, little details can be worked out once I know
which direction I will go. I was considering that DFS might be a way to help get through the process although when finished the 2012R2 Files server will be by itself with no other file server planned at this time. DFS can stay installed for maybe
future purposes but clearly I wouldn't need the DFS Replication with only one machine.
Here's a few details of the environment....
1. DC's are 2012R2 but it is still 2003 DFL because the old 2003 DCs are still present. But likely they will be gone and the DFL elevated before I start on the File Server project
2. Nearly all machines in the facility have a shortcut on the "All Users" Desktop that points to the existing old File Server. Editing or replacing that shortcut would be a major pain,...hence why I want to keep the same machine name at least,
and maybe the same IP if not too much trouble. This way the existing shortcut would continue to work with the new 2012R2 File Server. The UNC path represented in that shortcut is also configured into one or more of our major business applications,
futher emphasizing the need to keep the UNC path the same throughout the process.
3. The facility runs 24/7/365 but is "light" on weekends. The political environment is such that there is little to no tolerance for any down time at all.
4. Would DFS (based from the 2012R2 machine) be a good tool to get where I need to go?
Thanks for any suggestions.
Phillip Windell

Hi Sharon,
I've done some more reading and have a few new ideas to run past you....
Yes regular DFS wouldn't help and the Namespace would still be different than how it was with just the old server. However I was thinking DFS Replication could replace the purpose of RoboCopy and it would keep the two locations "in sync" until I was ready
to flip over to the new server. DFS Rep can exist independently of a DFS Namespace, so a Namespace is not even needed. It needs a minimum of 2003R2 for the "later & better" DFS Rep but I believe 2003 can do an "in place" upgrade to 2003R2, so I would upgrade
the old server to 2003R2 first. As long as the DFS Rep on 2012R2 and 2003R2 will properly interact I think that will work.
Thanks for the reg info on the Shares. I'm debating if editing that would reg file would really be much better than manually creating the Shares on the new server while the DFS Replication was doing its job. I'll probably export that Key as a
safety move whether I use it or not.
Once the DFS Rep is fully in sync and the Shares are in place on the new server, I figure I would then:
1. Remove the DFS Replication Object (optionally remove DFS Services completely)
2. Rename the old File Server to something else and set it to DHCP
3. Rename the new File Server to the name I want to use and give it the IP the old server had.
How does that sound?
Phillip Windell

Installing All (9iDB,9iDS and report server) in same machine

I want to use one machine only.
I have installed 9i database, and on same 9iDS.
and created a report server on same machine
i am facing a problem
all application runs very fine but on running report from
forms by using webs.show_document()
a new page comes and states
Opening page http://server1:8888/reports/rwservlet/getjobid..
and hangs there only.and it hang such that after closing the page
application also does not work.i have to restart OC4J
i have seen in trace file report finished successfully
and also in report\cache directory report file is alreasy made.
now when i install 9iDS in another machine and use the other machine as application server,report server be in
any machine it work fine.
all report are displayed. no problem comes in that case.
But i have to use only one machine .
pls state me solution
thanks a lot
regards
raj

I HAVE SEEN IN JINIT CONSOLE
trace level 5
on server where (9iDS and database both installed)
Opening http://server1:8888/forms90/l90servlet;jsessionid=c995d4251dd849878b75cf8649b1d477
Connecting http://server1:8888/forms90/l90servlet;jsessionid=c995d4251dd849878b75cf8649b1d477 with no proxy
Opening http://server1:8888/forms90/l90servlet;jsessionid=c995d4251dd849878b75cf8649b1d477
Connecting http://server1:8888/forms90/l90servlet;jsessionid=c995d4251dd849878b75cf8649b1d477 with no proxy
Opening http://server1:8888/forms90/l90servlet;jsessionid=c995d4251dd84987
and so on..
on another machine
from where reports comes
this is trace file
Connecting http://pdc:8888/forms90/l90servlet;jsessionid=db17d7a493484cb8ac2ac70498be1448 with no proxy
Connecting http://pdc:8888/forms90/l90servlet;jsessionid=db17d7a493484cb8ac2ac70498be1448 with cookie "getfileauthid=c0roXNhhSA=="
Opening http://pdc:8888/forms90/l90servlet;jsessionid=db17d7a493484cb8ac2ac70498be1448
now i see in first stage it is not connecting with
cookie

Is it possible to install Oracle 9i and SQL server on same machine

1. Is it possible to install Oracle 9i and SQL server on same machine ?
2. If yes, what are the problems i may encounter during installation
3. What should be hardware configuration for installing both databases in same machine like hard disk space, RAM speed etc,

Hi,
1. Yes you can do it.
2. There shouldn't be any problems
3. Depends on your needs
Jarek

How to instal FMS and Wowza Server on same machine.

I want to to instal FMS and Wowza Server on same machine any one know about this please guide me about this.
Thanx in advance.

I have on one server installed both red5,fms and wowza
first install red5 ( by default it uses port 1935 obviously )
then let say wowza , with installation choose port 1936 ( make sure you open this port )- you app will run on rtmp://your-ip/domain.com:1936
then fms - choose port 1937 ( here again make sure you open this port too ) - rtmp://your-ip/domain.com:1937

Oc4j starting with Oracle Database & oc4j App Server on same machine

Hi ALL, can anybody help me(pls read this)
This is Sagar, i have created a GIS Application(java) using Oracle 10g.
Senario I:
oc4j server and oracle 10g Database Server on different machines:
When i start oc4j server with NO. OF Mappers = 64 or 30 in DNS using
1. oc4j -start (normally)
from the path c:/oc4j/bin by setting ORACLE_HOME path normally
application is working fine but when users are increased say 4 to 5 oc4j server gives error:
java.lang.OutOfMemoryError: Java Heap Space
I searched for this error i found a solution for starting oc4j as follows:
2.Java -Xmx1024m -Xms1024m -jar oc4j.jar
from the path c:/oc4j/j2ee/home --- oc4j.jar
Then map & application works fine and fast since heap space is increased to 1GB (speed is noticable)
but if...(in other senario)
Senario II:
oc4j server and oracle 10g Database Server on same machine:
if step 2: is used form above senario, oc4j Server does not gets started only it gets initialized...(server does not gets started)
but Step 1: is used application works fine but again heap space error as mentioned above is seen.
Again if changes are made in oc4j.cmd file in c:/oc4j/bin ....by giving the heap space command oc4j works fine but the application(performance) is very very slow but heap space error is not seen.
Please can any body suggest the solution.. application should work fast and also the heap space should be increased but taking the senario - oc4j App Server & Oracle 10g Database Server on Same machine..

Hello,
How much RAM do you have on the machine? What is the size of the SGA for the database you are using?
if step 2: is used form above senario, oc4j Server does not gets started only it gets >initialized...(server does not gets started)What do you mean by this? Provide the output from the server when you start your server.

CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.

oracle 9ias and oracle 9i database in same machine Feb 25, 2003 11:22 PM
Reply
Dear Friends,
I installed oracle 9ias. and then i hosted my form,report into that server . All was working properly.
at this time my database was into another machine.
then i installed oracle 9i database into the same machine
(as the oracle 9ias was installed)
at the instalation of oracle 9i database one error comes
and shows that Agent configuration Assistant Installation
fail.
but After installation of database it work properly.
there is no problem.
but when I try to run from through web(by using oracle 9ias)
it gives Internal error(500).
i check and find that my appache server for 9ias is working properly and in services of windows 2000 no error comes.
HOW CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.
With regards
Siddharth Singh
[email protected]

Hi James,
Have u ever tried ORACLE 9iAS R2 on Redhat Linux ?
If yes what is the version of RH Linux you were using ?
Any docs for that ?
[email protected]
Regards
Amudharasu

Designer 6i and 10g on the same machine?

I have Designer 6i and corresponding repository on my machine.
The problem with 6i I can't save diagramm in HTML format
I believe I can save in HTML format in 10g or other?
Can I install on the same machine 10g designer?
should I configure new repository?
TIA

See my update on your earlier question.
As for running 6i and 10g on the same machine, yes you can do it. You just have to install them in separate Oracle Homes, and be careful when you tell them which version of EXP and IMP to use. There is one MAJOR caveat, however. They cannot use the same Designer Repository - 6i client won't talk to a 10g repository and 10g client won't talk to a 6i repository. You can upgrade a 6i repository to 10g with the RAU, but take a backup before you do - the only way to go back is to restore your backup. Besides, I think that if you upgrade to the last supported version of Designer 6i (you should be able to get it from MetaLink) you will get the Publish Diagrams utility.
Frankly, my opinion is that there is only one reason to stay on 6i - if you need to generate and support 6i client/server Oracle Forms. If you don't use Oracle Forms, or if you have moved on to Web Forms with the middle tier Forms Server, I'd recommend an upgrade to Designer 10g and Developer 10g.

Installatioin of BWI and R/3 on same machine.

Hi,
I installed BWI on a server. If i like to install R/3 on same machine, then do I need to again install Central instance or Just Database instance? When I install BWI, I installed first the central instance and then database instance and now when I am trying to install R/3 its giving me a menu which has Central instance, Database Instance , Dialog instance. Is Central instance different for BWI and R/3? What do we actually mean Central instance. Even though is not advisable to install BWI and R/3 on same machine, but in my case i am trying to do that, so do I need to also install Central instance even though it was installed during BWI installation?
Thanks.
Syed.

Hello sYed,
How r u ?
You can install BW & R/3 on same system, but u cannot do any extractions like Generic, Co-PA, etc. Also, its not advisible to install both BW & R/3 in a single operating system, so you have to install Windows 2000 & Windows 2003 then install R/3 & BW Respectively.
I think its possible to install in a single operating system, when ever u want to work on R/3 or BW, u have to kill one server and start the other one and so on.
Hope this helps,
Best Regards....
Sankar Kumar
+91 98403 47141

Is it possible to run VLM and lmtools on the same machine

hi together ... is it possible to run VLM and lmtools on the same machine without any problems?
the running system will be Windows Server 2008 R2 x64! maybe we will install the license server on the virtual server.

Hi SvenNittmann,
in general, it should be possible to run both tools (VLM and lmtools for FlexNet) on the same machine. But I wouldn't recommend you this way, because NI VLM is also build on top of FlexNet and sometimes you will receive ugly problems with the installation of both tools on the same PC. It is possible to use VLM in a virtual machine without any problems or restrictions. NI provides information about the usage of VLM in a virtual machine, like you can see here:
Volume License Manager on a Virtual Machine - National Instruments
http://digital.ni.com/public.nsf/allkb/5730FDDC97F9157E8625755F00749CFF?OpenDocument
I also use VLM in a virtual machine and I could recommend you the same solution.
Regards, Stephan

Hotmail Full Calendar/Contacts and Email Sync Poss...

You can set up hotmail to sync calendar/contacts and email (all folders, just like imap) through the N900 but have to set it up as an "exchange" account.
In the email client add new account and select "exchange" and put in your username and password. The next page will ask for the server which is m.hotmail.com - leave the domain empty. Select SSL (which it does by default.) Then set up your sync parameters.
This is nice for consumers who don't have a work exchange account that takes care of syncing for you.
If you run Outlook - you can use the Outlook connector to sync your contacts/calendar to Hotmail - which will then sync onto your N900. This way you won't have to use Ovi or PC Suite to sync...
Just passing along... I searched and found some info on this for other Nokia devices - but nothing for the N900 so I thought I would mention it.
Sandy

kudos for that, since i upgraded to pr1/2 i've been changing between both google and hotmail, but after pr1.3 i decided to stay with hotmail.
anyways here are the settings to get google account working :
Calendar AND contacts sync settings can be created by:
1st Open settings menu.
2nd Open "Email for Exchange" submenu.
3rd Filling in the fields as:
a. Server: m.google.com
b. Port: 443
c. Secure connection: check yes
d. Conflict resolution: your choice
e. User name: [email protected]
f. Password: your password
g. Domain: leave blank
h. Synchronize e-mail: leave unchecked.
i. Synchronize calendar and tasks: check yes.
k. Calendar: N900 (to populate existing calendar) or create a new one
j. Synchronize calendar back: your choice
k. Synchronize completed tasks: your choice
l. Synchronize contacts: check yes
m. First synchronization: your choice
A note of caution: For this sync to work your calendar must be empty. If you have already used the synchronization tool to transfer the calendar data from your old phone to your n900 it will not allow you to write the Google calendar data from the server into it. The n900 calendar will remain as a local, unsynchronized calendar and you must create another calendar for synchronization purposes. However, I believe this is not the best way to go. Instead, if you have already transferred your calendar data from your old phone open the n900's calendar, select all, and delete. Then the Google server will synchronize its data with the N900 calendar.
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos

CS3 Bridge and CS4 on the same machine.

Hello Everyone,
I have adobe photoshop CS3 and Illustrator CS4 on my machine. Any known issues for running bridge CS3 and CS4 on the same machine? Some experts at telling me not to use Photoshop CS3 with Bridge CS4, just wondering. Thanks for you replies.

Bridge is not really a stand alone product, and tuned to work with its current version of PS. Also, Bridge CS4 has some features changed and/or added. So if using CS3 Bridge you might have aspects that don't work with PS CS4.
I would keep CS3 on the machine if you don't need the HD space, until you feel you no longer need the older version. But use them as a pair as intended. Also, only have one Bridge running at a time.
I did not upgrade to CS4, but from what I have read I see no reason to use Bridge CS3 as the upgrade is faster, less prone to crashes, and has added features.
CS4 PS on the other hand can be tricky if you don't have a newer computer with a good video card.

What is the best way to have access to OSX and OS9 from the same machine?

What is the best way to have access to OSX and OS9 from the same machine?
Do I need to partition the hard drive? Installed both Tiger and OS 9 on the G5 and it is having problems starting up properly.
G5 Mac OS X (10.4)

And here is the prove for Edwin's message: Macintosh: Some Computers Only Start Up in Mac OS X

Can i run 9ias versions 1 and 2 on the same machine

i need to install 9ias versions 1 and 2 on the same machine but in separate databases, is this possible? if it is possible are there any issues that i need to be aware of?

You can install the portable Firefox 3.6.x version to access websites that do not work with Firefox 5+.
*http://portableapps.com/apps/internet/firefox_portable#legacy
*http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
*Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html

Calendar Server and Email Server on Same Machine - Email Issue

Similar Messages

Maybe you are looking for