Calendar Syncing most recent change

Syncing calendars on iPhone 3GS with Outlook 2007 via iTunes. Is there a setting that will direct the sync to select the most recent calendar entry and/or change? For example, a planned event exists on both calendars. If I change the event date in Outlook, when I then sync the iPhone with Outlook, the original event date will be restored in Outlook as it was listed on the iPhone calendar, and the new, changed date will also be shown on both calendars. I need the iPhone to recognize the more recent change in Outlook and accept that change. I also need the reverse process to work, with changes made on the iPhone calendar to be reflected in Outlook following the sync.

The iphone is designed to work as you want it to.
Something is amiss with your individual iphone/situation.
Have you tried a reset? Restore?

Similar Messages

I have Lion on my laptop and I want to back up my calendar TO my iphone. Not the reverse. iCloud only goes from iphone to iCloud to mac not the other way. Also, why doesn't "sync" mean update most recent changes across all devices?

I have Lion on my laptop and I want to back up my calendar TO my iphone. Not the reverse. iCloud only goes from iphone to iCloud to mac not the other way. Also, why doesn't "sync" mean update most recent changes across all devices? I thought that was the point of iCloud. Any suggestions since iCloud doesn't seem to work?

It's a work computer so I wanted to save them to my iTunes so I can access from another computer. Should I go to a home computer and just Import for best results? If so how do I do this? Also, why would I be synched with another library and how do I find out what this is? Very new/green user here

How can I upgrade my Photoshop Element to the most recent changes. Thank you!

How can I upgrade my Photoshop Element to the most recent changes. Thank you!

Hi,
If you mean "How do you upgrade to Photoshop Elements 13 from an earlier version" then you need to buy the new version. There is an upgrade option but if you shop around then you can sometimes buy the full product cheaper. They are both the same product once you have installed them.
If you install Photoshop Elements 13 on the same system as your old version the you can convert your existing catalog to the new format.
Note that Photoshop Elements 13 will not work on older operating systems. The 30 day trial version can be downloaded from here
Download Photoshop Elements products | 13, 12, 11, 10
If you are asking about updating the camera raw in your current version then we need to know which version you want to update. Normally, you can go to the Help menu and select Updates.
Note that each version has a limit on the version of camera raw that it can use - again we need to know which version you currently have.
Brian

[Solved] Vim: Can only undo most recent change

Howdy-ha, folks. So I've been (very) gradually making the transition from Geany to Vim over several months, mostly without issue. However, I've been reluctant to use Vim for anything other than quick, simple operations for one reason: The "u" key will only undo the most recent change, as though there aren't any other changes in the history. Hitting "u" a second time reverses the "undo" command, so that repeatedly hitting it will just remove and add the same small change over and over again. No matter how much time I spend looking into this it seems I'm the only person who's ever had this problem, and it occurs regardless of whether /etc/vimrc and ~/.vimrc exist. As a result, I can't do any complex editing for fear of botching something and needing to spend hours backtracing my mistakes. Any help on this is appreciated.
Last edited by ANOKNUSA (2012-05-18 15:22:06)

skanky wrote:It should do. There's a comment in /etc/vimrc recommending against changing, so it's worth looking into. There are other settings there that could affect some behaviour, apparently.
That would likely be the issue: I overwrote the default with my own config file, without including runtime! archlinux.vim in my own config. As far as I can tell, things are working as both user and root. I suppose I should have paid more attention, but then again, there's no mention in the Arch wiki entry about not altering/deleting any of those files:
Arch Wiki Vim Entry wrote:
Vim's personal configuration file is located in the home directory: ~/.vimrc. Advanced users tend to keep a well-tailored ~/.vimrc. The global configuration file is located at /etc/vimrc. The fall-back $VIM variable is defined as /usr/share/vim/. For example, to create a global colorscheme the *.vim colorscheme file should be stored in /usr/share/vim/vimfiles/.
Currently, the vim global configuration in Arch Linux is very basic and differs from many other distributions' default vim configuration file. To get some commonly expected behaviors (like syntax highlighting, return to the line of the last edit...), consider using vim's example configuration file:
cp /etc/vimrc /etc/vimrc.bak
cp /usr/share/vim/vim73/vimrc_example.vim /etc/vimrc
It seems the comment in /usr/share/vim/vimfiles/archlinux.vim is all new users have to go on, and it's not usually the first place anyone looks.

Problem getting most recently changed item.

Hi,
I am trying to set the value of an item based on the most recent item to have changed.
I have 3 conditional processes which set the value of a hidden item (P1_FOCUS) 'When Any Item in Comma Delimited List Of Items Has Changed'.
Proc1 (sequence 50): If P1_SEL_A changes, P1_FOCUS is set to A.
Proc2 (sequence 60): If P1_SEL_B changes, P1_FOCUS is set to B.
Proc3 (sequence 70): If P1_SEL_C changes, P1_FOCUS is set to C.
If all three P1_SEL... items (select list with submit) are changed at some point, it doesn't pick up the most recently changed item, it just knows they have all changed and therefore the item is set to C as the C process is the last to be run (I assume the processes are run in sequence order?).
Is there a way to only pick up the most recently changed item? Maybe clear the history of what has changed on this page somewhere?
Overall, I am trying to get the last item in changed before the submit so the focus can go back to that item on the page in the page 'on load' process.
Cheers
Katie

ApEx normally generates links that look like buttons by adding styling to an "a" tag.
"a" tags accept focus in the same way as buttons so you have actually lost the focus on the final input field by the time you've clicked the link.
However, you can test this by creating a new button template in your theme. Use something like the following in the Template Text:
<button style="font-family: Arial, Verdana, Helvetica, sans-serif; font-size: 11px; padding:1px; margin: 2px; text-decoration: none; cursor: pointer;" onclick="#LINK#">#LABEL#</button>
This will create a normal HTML button.
If this doesn't work, can you paste into this thread a copy of the javascript you are using.
Regards
Andy

Sync most recently created playlist in a playlist folder

I have a playlist folder, and each playlist is a different week's Billboard chart. Each playlist is named by the date of the chart, ie "Country Chart 02-28-11." I'd like to have the most recent one sync automatically to my iPhone. Is there a trick to doing that?
I thought I could create a smart playlist that would always be a copy of the most recent playlist, and sync that, but I haven't figured out how to do that. Any suggestions?

Your iPhone was probably set to sync your old playlist but haven't for the newly created one.
Plug your iPhone to your computer, select it in iTunes and then select the music tab. In this tab, look at which playlist is selected to be sync with your phone.

The calendar sync is recently not working correctly, not display "All events" but it only displays the last six months for my individual entries. My repeating entires do go back further, though. How do I fix?

I have an iPad 5.1.1. The calendar sync has started to not work correctly. I have it checked "All events," but it only displays the last two months for my individual entries. My repeating entires do go back further, though. How do I fix?

HI Jason269. Thanks for your reply, however I wrote that I already have "All events" checked. If All Events is checked and it doesn't diaplay all events, how do I fix? It seems this is a common issue, as I have read many others on here state the same problem.
I believe my problem occurred when I synced my iMac calendar to my iPad calendar using yahoo. Yesterday, I unsynced them on my iMac controls. When I checked my iPad calendar, all of my old entries reappeared - but only for five seconds and disappeared again. So, the data is saved and still there but cannot be displayed, even when I have All events checked. In fact, it only shows my individual entries for the last two months, but does show all my recurring entries. If I switched to last six months, I will see everything for the last six months. If I switch back to all events, it is only for the last two months.
As I mentioned, others on here have expressed exactly the same issue, including the two month example and having used yahoo.
For legal purposes, I need to be able to use the information from my indidual calendar entries in an upcoming court case. So I really need to fix this ASAP!

I have a 2009 MacBook Pro. How do I do a backup on the new internal hard drive using my existing LaCie external drive without re backing up the entire internal drive. Just want to backup most recent changes

I have a mid 2009 15" MacBook Pro. The existing internal drive was about to fail so I had it replaced with a 500GB western digital drive. I have been backing up my system with a LaCie 500GB external drive. I want to perform a new backup using Time Machine but I only want to backup any changes from the last 30 days or so. I want to avoid doing a total system backup thus duplicating most of the data on my external drive and pretty much filling it up. Any suggestions appreciated

Look at this web site devoted to Time Machine:
http://pondini.org/OSX/Home.html
I suspect that this portion will address your situation:
http://pondini.org/TM/15.html
Ciao.

Exported PDF does not reflect the most recent changes to my inDesign document

When I export a new PDF from inDesign after I have made multiple changes to the document the PDF looks like a previous version of my inDesign doc before the edits

Delete the old PDF normally, empty the trash and export again. It happened to me last week several times that InDesign could not overwrite an existing PDF but did not claim an error. After deleting the old file, the problem was solved.

Sync iPhone with iCal takes most recent update in either?

I am seeing what appears some unpredictability on the above. I am not sure whether sync through iTunes makes sure to take most recent change in Calendar, be it through iCal or iPhone Calendar. Is there a special setting to ensure this happens?

cschwanenberger,
Are you using Mac OS X 10.7.2 Lion on your computer? It is required to gain full iCloud calendar sync capability.
If you are using Lion, what calendars do you have listed under the iCal "Calendars" tab? Only data entered under the iCloud category will sync with iCloud. Any data entered under the "On My Mac" category will not sync with iCloud.
iCloud: Troubleshooting iCloud Calendar may be helpful.

How to determine most recent date from the date column of internal table

Dear friends
would you like to tell me. how i determine the most recently changed record by looking at date and time from internal table i am not supposed to sort the table by date and time... I must check date and time with other records date and time to determine which record is most recently changed...
here the scenario is.
id idnumber chdate chtime
1 123456 20060606 135312
2 123456 20060606 135900
3 123456 20060606 132300
4 123457 20060606 140000
5 123457 20060606 142500
in the above scenario i must keep in my mind that the most recently changed record is identical to its idnumber i can say that:
the record should be fetched this way
id idnumber chdate chtime
3 123456 20060606 132300
5 123457 20060606 142500
because here the id 3 is the most recently changed in the idnumber 123456
where id 5 is the most recently changed in the idnumber 123457
please help me to determin how i am supposed to carry out this task any suggestion, code will be great help of mine.
regards
Naim

After testing my suggestion above, I realized that it doesn't work because the delete adjacent actually will keep the first one and delete the rest. I'm working with Srinivas's code a bit now, I think it is almost what you want. I am under the impression that you dont' want to HIGHest date/time, but just the last record of the sequence, if this is the case, then this code will help. Here we will assign an index to each record per the idnumber, that way we can sort it and get the lastest record.
report zrich_0001.
types: begin of itab_type,
        id       type i,
        idnumber type i,
        chdate   like sy-datum,
        chtime   like sy-uzeit.
types: end of itab_type.
types: begin of itab_type2,
        id       type i,
        idnumber type i,
        index    type i,
        chdate   like sy-datum,
        chtime   like sy-uzeit.
types: end of itab_type2.
data: itab     type table of itab_type with header line,
      itab2    type table of itab_type2 with header line,
      prev_rec type itab_type.
data: v_id type i.
start-of-selection.
itab-id       = 1.
itab-idnumber = 123456.
itab-chdate   = '20060606'.
itab-chtime   = '135312'.
append itab. clear itab.
itab-id       = 2.
itab-idnumber = 123456.
itab-chdate   = '20060606'.
itab-chtime   = '135900'.
append itab. clear itab.
itab-id       = 3.
itab-idnumber = 123456.
itab-chdate   = '20060606'.
itab-chtime   = '142500'.
append itab. clear itab.
itab-id       = 4.
itab-idnumber = 123457.
itab-chdate   = '20060606'.
itab-chtime   = '140000'.
append itab. clear itab.
itab-id       = 5.
itab-idnumber = 123457.
itab-chdate   = '20060606'.
itab-chtime   = '120000'.
append itab.
clear itab.
<b> data: counter type i.
* Assign an index to each row per idnumber
loop at itab.
    on change of itab-idnumber.
    if sy-tabix > 1.
      clear counter.
      endif.
    endon.
    clear itab2.
    move-corresponding itab to itab2.
    counter = counter + 1.
    itab2-index = counter.
    append itab2.
endloop.
* Sort it and get rid of older records.
sort itab2 by idnumber ascending
                 index descending.
delete adjacent duplicates from itab2 comparing idnumber.</b>
read table itab2 with key idnumber = '123456'.
write:/ itab2-chdate, itab2-chtime.
read table itab2 with key idnumber = '123457'.
write:/ itab2-chdate, itab2-chtime.
Regards,
Rich Heilman

How to get the Most RECENTLY installed JRE path and version ?

Hello Experts,
I am working on Installshield, and for some purpose, I need to get the MOST RECENTLY installed JRE version and Path. Now I have two choices :
1. Go into the directory " C:\Program Files\Java\" and get the most recently changed directory, ( that will be the installation directory of the most recently installed JRE ). And then search in the registry under : HKEY_LOCAL_MACHINE/SOFTWARE/JavaSoft/Java Runtime Environment/ and look for the version which is having
the value of the key INSTALLDIR as the above found Installation Directory.
But in this approach, I'll never find the Installation dir or version, if the JRE is installed somewhere else than the default location.
2. Now this is the reverse. I first search in the registry, and get the Installation Directories of all the versions installed in the system, and then look at the file attributes ( may be by using some batch file ) and see which one is most recently installed.
My question is, is there any other way, by which I can get the most recently installed JRE's installation Path and version? Or can we trace it during the installation itself ? I mean when we install the JRE, it creates some log files in %TEMP% directory. Is it possible to trace the version and installation directory of the most recently installed JRE from the log file ?
Thanks
Gagan

Rendering times are pretty much based on processor speed if I have that right. Not much you can do about that other than buy a new computer. Your day to day work in the finder and accessing of files would be faster with your boot drive internal. One thing you can do is ensure your FCP System Settings are on the fastest disk you have. If you put a pair of drives internal and made a RAID volume for them you would improve your write speed when capturing and for any other read/write operations. You would have to be sure you kept that backed up properly because you double the odds of a failure when two drives spread the data between them. There are many RAID options.
You could also bump up the RAM but you'd have to look at your processes to see if you are being limited by RAM. I'm guessing not but it's not impossible. If you are accessing scratch disks due to RAM limitations that would be one thing you could do.
I would never bother connecting an external via USB if there was an esata or firewire option. I use an esata card internally to give me access to estata storage. I also keep an external FW800 drive for a mirror backup of my boot drive. All my data and booting is internal with all my backups external. Each internal has an external and I have additional externals that I keep off site to protect against fire and theft.

How and where do I access the most recent backup of my iTouch's calendar PRIOR to my auto-sync?

How and where do I access the most recent backup of my iTouch's calendar -- prior to the recent auto-sync which lost 5 yrs. of info. on my calendar? I want to retrieve it.

All you can do is restore from backup. To do that see the restore topic of:
iOS: How to back up
Also, turn off autosyncing so that when you reconnect the iPod to yuor computer the old backup does not get overwritten . To turn off go iTunes>Preferences>Devices and check the box that says "Prevent iPods...".
iTunes only retains the most recent backup and updates it with the changes.

Palm t/x sync calendar not updating recently

I've had a palm tx for years, sync'ing fine with Outlook on windows 7 platform. Recently my calendar has been sync'ing successfully, so it says, but new dates/appts are not showing up. I've tried uploading drivers but that hasnt' changed anything. Connections are fine. Using USB cradle. Any suggestions?
Post relates to: Palm TX

you need Oracle Calendar Sync version 9.0.4.2.11, which Oracle still has not put out on its download site, even though they will make it available on request.
I have numerous Palm units (mostly Treo 650s and T|Xs) synchronizing with a variety of Mac units (PPC and Intel) using 9.0.4.2.11 with no problems.

When I sync my photos to iPhoto from my iPhone 4S it like saves about 200 on my phone. I really don't like that because they're like really old and stay the same... Can you take that setting off? Or just make it you most recent pictures instead?

When I sync my photos to iPhoto from my iPhone 4S it like saves about 200 on my phone. I really don't like that because they're like really old and stay the same... Can you take that setting off? Or just make it you most recent pictures instead? It's really annoying because they're like year old pics

it had to do with Maverick/Aperture not supporting the same date formats as before in Smart Albums when I upgraded.
Smart albums based on dates have always been problematic, if you use smart settings that require a date string to be entered. How the date string will be interpreted, will depend on your settings in the System Preferences > Language&Text > Advanced > Dates formats and the "Region".
It is much safer to use "Calendar" rules in Aperture instead of "Date" rules with date-strings. Calendar rules will remain valid, if the region settings are changed in the System preferences.

Calendar Syncing most recent change

Similar Messages

Maybe you are looking for