Calendar system error (-1) with Nokia N95

My N95 keeps presenting the error message "Calendar: system error (-1)" when I try to access the calendar.
N95 with firmware V 12.0.013 19-06-07 RM-159 Nokia N95 (B1.01)
Has anyone experienced the same error before? Any ideas on how to solve it?
Thanks,
Giba

Latest firmware for N95 is 20.0.015. Check with your product code on:
http://europe.nokia.com/A4577224
Search the forums, though, for more info about this update, because there are some issues with SIP and VoIP. Overall, though, the phone increases its battery life, memory performance and camera image quality. The newer firmware is available since November 26th.
Ericsson T10i -> Nokia 7110 -> Siemens C45, C55, M55, M65 -> Nokia 6131, N73, N82 -> HTC Wildfire, Desire HD -> Nokia Lumia 800 -> HTC Desire X -> Lumia 820 -> Sony Xperia SP -> Lumia 925 + Sennheiser CX 500
If I've helped, use the Kudos button to thank

Similar Messages

Problem sync iCal with Nokia N95

I´m trying to set up iSync to synchronize my iCal (MobileMe calendars) with Nokia N95 8 Gb.
Contacts is synchronizing fine but when I try to click the check-box to define which calendars I want to sync I get this message:
"Before you can synchronize your calendars, you need to open a calendar application that supports synchronization and create at least one writable calendar."
How can I create a writable calendar in iCal???
..gob...

Excellent!
Thanks Julian. I had no idea there were functions hidden behind that icon. So simple now you've shown me.
Thanks very much for your help.

Is it possible to Skypephone with Nokia N95?

Hi,
Is it possible to Skypephone with Nokia N95? What is necessary to do?
Thanks.
Milan
Moderator's note: Subject was amended as the post was moved to the more appropriate board.

Got a feeling that application was removed from Nokia Store due to expired Symbian Certificate. If you find application elsewhere may need to alter date upon N95 back to mid 2012 or perhaps 2011 to get it to install, and then revert to present day.
Happy to have helped forum in a small way with a Support Ratio = 37.0

N97 system error message with profile personalisat...

I hope somebody could help me here. After a long week of reviewing new iphone vs N97 (on the internet). I have opted to go for the N97... so far so good, had similar issues to the ones reported by other users but I am sure it will be a matter of new firmware to fix the buggy situations.
Anyways, my problem is a bug with the sound/ringtone folder I think. When I try to personalise a profile, so I will choose profile<personalise, then when I tap the ringtone icon (in order to change the ringtone) the next screen (select a tone with download sound clips, tones, songs, video clips, sound clips or off options) when I reach this screen, a system error message appears. Clicking on any of the above folders does not result in opening the folder. In other words I am unable to reach the ring tone folders. The same thing happens when attempting to change txt sounds.
Even when I browse the memory via the PC, I dont see any files on sounds folder (both mass and phone memory). I have done a software reinstall (lost the pre installed games ) and it still not solved the problem. Any suggestions?
For now I will have to live with the standard ringtone. I will call nokia support and the mobile phone provider, if the issues are not solved I may consider iphone afterall eventhough I am not a fan of the iphone, but they do seem to have a much stable and more responsive software.

Solved the issue: 7370 format did the job.
The issue must have occured because I synced the phone with my n95 so even with a software reinstall, N97 retained the personal settings (including the corrupted files) so a format got rid of it.

Who can solve iSync problem with Nokia N95? (I use the Nokia plug already)

Hello
Since I bought my new cool Mac:, I sync my N95 with iSync and the Nokia N95 plug-in. Thinking at first that is works flawlessly (as other members here seem to think as well) I later found out, that if I make changes to any calendar or "to do" description! on either the N95 or the Mac it syncs, but only up until a certain number of characters. If I exceed this number, the description on the phone will simply be cut off - in the iCal it still fully appears though.
Rather surprising, since when syncing with a PC via the Nokia PC suite there is no such an issue. All my often lengthy descriptions are fully put on the phone. And if I sync back there are no problems either. So I guess it has to do with the iSync protocol or this Nokia N95 iSync plug-in? Any ideas, solutions...? Any help greatly appreciated!
A bit in despair
Zuckermann

The flex cable is damaged. Some years back when I had a Nokia N95 8GB the flex cable was damaged and for a few days the screen was showing strange colours at the display and eventually the screen became black. I went to a local repair shop and I replaced the flex cable and what I noticed was that the flex cable that it had no proximity sensor on it so I told the technician to remove the proximity sensor on the original one and replace it with the new flex cable. Another thing I discovered was that after fitting the flex cable and returning the cover the front camera was not in its usual position so the technician had to do some modifications to get it back to its normal position and after a few months it was damaged and this time I went to Nokia Care Centre and replaced the flex cable for a small fee and what I noticed was that the flex cable that I previously bought was a fake cable. The one bought from Nokia Care Centre had its proximity sensor and when the cover was returned the camera was in its exact position the same as it was with the original flex cable. What I wanted to say is that please beware of fake flex cables on the market and I suggest that you buy it from an authorised Nokia Dealer.
Ngwangwa - Six Million Ways To Die Choose One

Cannot Isync anymore with Nokia N95

I synchronized, via USB cable, my N95 with my Apple MacBook Pro for the services "iCal" and "Address Book" using the program iSync on the Mac.
I did this synchronization all along 2008. Since the beginning of 2009 when I try to do the same synchronization I immediately get the message "System error" on the phone and an error message on the mac saying that the synchronization failed due to an error . No synchronization is done.
Trying same procedure with bluetooth connection gave the same results.
Tried on another mac with a fresh system, same results.
Problem seems to be on the phone.
My N95 is on version S0,
V20.0.015
No further updating.
MacBook Pro / 10.5.6
iSync is the last version.
N95 plugin is the latest.
Any suggestion to move out of the problem?
Thank you.
CP - Geneva, Switzerland

I have the same problem since the introduction of Mobile me. Up till that point everything worked seamlessly using iSync via Bluetooth. I have tried everything I can think of to make it work including upgrading to the latest software for the N95. As it was only after the Mobile me change I can only think it was as a result of changes to the settings introduced by that change. The N95 has its own syncing program that works perfectly on a PC and I can browse the device on my Mac but it just won't sync, its really annoying.
Has anyone out there overcome this problem?

Not sure if Micro SD work with Nokia N95

Today I went to tesco, and bought myself a Micro SD 2GB for my new phone Nokia N95.
I'm not sure if it will work or fit in. It does say its suitable for most Nokia phones.
Also will my computer recognise it?

The N95 should have no difficulty with the card, and if the PC has a Micro-SD reader then you should be OK there too. Many PC card readers take standard SD only, but you can get adapters to allow Micro-SD to be used with them, you might even have one provided with the card.

Wlan problem with nokia n95 8g RM-320

i have nokia n95 8g RM-320 frimware 35.0.00.1
wlan stopped working
and i did a lot of things but nothing happened
1- format phone memory
2- reinstall software many times
3- restore factory settings
4- restore beackup without settings
the problem is
some times the phone can find the wlan and sometimes not
and if it find the wlan it cant connect to the connection
ps. nothing wrong with my access point because i tried another phone and it worked fine
plz i need help i really need this function to work again

plz help !!

Problem with nokia n95

i bougt in February 2010 a Nokia n 95 (code IMEI) that in October went out of work. I brought the telephone to the Nokia Assistance Center in Modena, Italy, where I live, but, after two weeks the answer was that the phone was rusty inside and therefore out of warranty!
Well, I am a doctor, I use the phone only for work in my office and I don't even bring it when I go on holidays... I asked clarification to ContactCentre.Europe since the 20th December 2010, but until now no answer.
The question is: did you ever received any similar remarks about Nokia N95?
Thank You
Moderators note:
"We would like to inform you that we have removed your IMEI as it is inappropriate to publish personal information on a public web forum".

You should contact Nokia Care by phone or by sending a message via this page:
http://www.nokia.it/supporto/contattaci
You should be aware that your previous e-mail has not been ignored, it simply hasn't been delivered. The address that you quote goes to an automated routing system which depends on an embedded code to determine where it should go. This code is added by the mailform on the above-mentioned page, and will be present in any mail that you receive from our colleagues at Nokia Care centremeaning that you can reply to Nokia mails; but you cannot send a direct mail from your e-mail account because there will be no routing code and your mail will simply disappear into the ether.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

Problem with nokia n95 lcd. Black screen and flex ...

Hi i have a nokia n95. I have it since its first year in the market. I am very pleased with the phone but the last month sudenly when i slide to open the phone's screen was not responding. The actual phone was working great. I could receive calls and make calls, listen to music and everything else. The screen was black though. As i am a technician with experience on iPhones mostly i thought that the lcd was damaged. So i ordered one from the internet and 2 days ago i received it. When i installed it i had the same problem. The phone works but the screen not. Then i completely dissaseblied the phone for one more time and i noticed something that i hadn't before at the flex cable. The flex cable consists of 2 flat cables. Well the one is completely broken. Take a look at the following pictures and please tell me you opinion. I am 99.9% sure that this is the cause of the lcd problem. I want to tell me if i should buy the flex cable. I can't go to a nokia center because the phone is out of the warranty over 2 years now. So the only option is to change it on my own.
Attachments:
IMG_0363[1].JPG ‏1631 KB
IMG_0362[1].JPG ‏1616 KB

The flex cable is damaged. Some years back when I had a Nokia N95 8GB the flex cable was damaged and for a few days the screen was showing strange colours at the display and eventually the screen became black. I went to a local repair shop and I replaced the flex cable and what I noticed was that the flex cable that it had no proximity sensor on it so I told the technician to remove the proximity sensor on the original one and replace it with the new flex cable. Another thing I discovered was that after fitting the flex cable and returning the cover the front camera was not in its usual position so the technician had to do some modifications to get it back to its normal position and after a few months it was damaged and this time I went to Nokia Care Centre and replaced the flex cable for a small fee and what I noticed was that the flex cable that I previously bought was a fake cable. The one bought from Nokia Care Centre had its proximity sensor and when the cover was returned the camera was in its exact position the same as it was with the original flex cable. What I wanted to say is that please beware of fake flex cables on the market and I suggest that you buy it from an authorised Nokia Dealer.
Ngwangwa - Six Million Ways To Die Choose One

SOAP adapter engine with system error, problem with fault message.

HI,
I have IDOC -> PI -> SOAP scenario.
Idoc to PI is async. I have no problem in receiving the idoc in PI. The message mapping is carried out and sent to the adapter engine. I can also see the technical routing payload. It is sucessful at XML monitoring in SXMB_MONI.
The error is at PI -> SOAP.
I have wsdl provided by the receiver webservice. Which I have imported.
And created a service interface against this wsdl. I tried changing it to both sync and async.
I have also provided fault message.
I have set a receiver soap communication channel and provided the target URL like "http://xxx/services" and soap
action = processDocument. Also provided user id and password.
I have a
Sender Agreement
Receiver determination
Interface determination
Receiver Agreement
I check in RWB adapter engine, this message goes to system error. The error log is as shown at the bottom.
When I see the message content, the SOap document shows me the details about IDOC, Instead I feel it should match
with the wsdl, where they have specified the corresponding interface name and address location etc.Please correct me.
How does the receiver know which service interface is it? The Service Interface which I created in the ER is
different from the WSDL, Does this have to be same? I see that the soap document in the adapter engine has the
Service interface name which I created in the ER. Where in the document the Reciever interface name is sent?
Where can I see the generated soap document for the receiver?
Is there some setting/configuration required in PI for this to work?
I tried using the tcpgw to see the error. If I dont provide the service interface name in the communication channel
then I get the following error in the TCPGW. "The service cannot be found for the endpoint reference"
When I provide the service interface name in the communication channel I get a valid fault message.
Similarly
When I use SOAPUI, I can see the fault exception being return. The adapter engine doesnot show an equivalent message
instead it goes into system error as shown at the bottom. I guess this is expected, if so what is the work around? (I found this weblog /people/alessandro.guarneri/blog/2011/01/10/soap-fault-in-sap-pi-hijack-it, do I need to implement this? Or use ALEAUD?
The fault message what I see in SOAPUI has the below format.
<soapenv:Fault xmlns:axis2ns1="http://schemas.xmlsoap.org/soap/envelope/">
         <faultcode>axis2ns1:Server</faultcode>
         <faultstring>nested exception is: psdi.util.MXApplicationException: BMXAA7136E - Validation failed when the
                            database default values were set. See the associated message for more information.
           BMXAA4190E - Country NZ is not in the value list.</faultstring>
         <detail>
            <Exception>org.apache.axis2.AxisFault: nested exception is: psdi.util.MXApplicationException: BMXAA7136E
                      - Validation failed when the database default values were set. See the associated message for more information.
     BMXAA4190E - Country NZ is not in the value list.
            /Exception>
         </detail>
</soapenv:Fault>
And the fault message in my ER service interface is stanadard datatype ExchangeFaultData, which is different from
the above. Is this the problem? Can I change the data type here to be the same as above?
Audit log in the RWB adapter engine.
Time Stamp Type Description
30.09.2011 15:10:57 Information MP: processing local module Localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
30.09.2011 15:10:57 Information SOAP: request message entering the adapter with user J2EE_GUEST
30.09.2011 15:10:57 Information SOAP: completed the processing
30.09.2011 15:10:57 Information SOAP: sending a delivery error ack ...
30.09.2011 15:10:57 Information SOAP: sent a delivery error ack
30.09.2011 15:10:57 Error MP: exception caught with cause
com.sap.engine.interfaces.messaging.api.exception.MessagingException
30.09.2011 15:10:57 Error Adapter Framework caught exception: null
30.09.2011 15:10:57 Error Delivering the message to the application using connection
SOAP_http://sap.com/xi/XI/System failed, due to:
com.sap.engine.interfaces.messaging.api.exception.MessagingException.
30.09.2011 15:10:57 Information The message status was set to WAIT.
30.09.2011 15:10:57 Information The asynchronous message was successfully scheduled to be delivered at Fri Sep 30
15:15:57 NZDT 2011.

I tried changing it to both sync and async.
I have also provided fault message.
dont feel that you need to do above steps.
I have a
Sender Agreement
ideally you dont need a sender agreement (and a channel) for IDOC --> PI flow.
When I see the message content, the SOap document shows me the details about IDOC
this is fine...you may see fields as seen in EDI_DC40 of the IDOC...
How does the receiver know which service interface is it?
receiver need not know about the SI created in PI.
The Service Interface which I created in the ER is
different from the WSDL, Does this have to be same?
you should the WSDL (external definition) as the Request Message in your service interface.
Is there some setting/configuration required in PI for this to work?
nothing specific...AFAIK
I have set a receiver soap communication channel and provided the target URL like "http://xxx/services" and soap action
can you open the URL from Internet explorer...from your machine or from the machine which is in the same network as your PI server?
Things to check:
WSDL structure in PI and in target system is exactly the same.
does the target system require mesage in SOAP format (SOAP envelope - SOAP Header + SOAP body)?
target system is up and running?

System Error occurs, with Japanese annotation.

Dear Developers.
I'm a user of "Adobe Reader for Android" in Japan. (This content is translated from Japanese.)
When I open any PDF file with Adobe Reader for Android and put annotation comment in japanese, "System error" occurs.
Here is my steps.
1. Open arbitrary pdf file with Adobe Reader for Android.
2. Tap the pencil icon.
3. Tap the "T" mark icon.
4. Tap any point int the view and input dialog box opens.
5. Input any comment in japanese and tap "Save" button.
6. Then "System Error" toast occurs and there isn't saved comment in the view.
OS：Android 5.0.1
Adobe Reader 11.7.1
I would glad if you fix this issue.
Thank you.

Hi,
Thanks for reporting the issue. We have been able to reproduce this at our end and are trying to fix it. We shall try to incorporate the fix in one of our future releases.
Thanks,
Adobe Reader Team

Unable to connect to WLAN with Nokia N95

Hi
Just bought a nokia N95 and I'm unable to connect to the WLAN at my work place. No problem connecting to my home WLAN, and there are no problems connecting my laptop to the workplace WLAN.
I browse for WLANs and select "Start web browsing", the wlan name comes up find and I select it, but after quite some time I get: "Internet: server not found".
I've read the other posts about assigning a static IP, but the sysadms here will kill me if I try that. Is there another way of getting this to work? It can't be true that the N95 is so picky with WLAN configurations?
Jens

Can you post your question on here with the WLAN AP model name, firmware version and N95 sw version (*#0000#)?
http://discussion.forum.nokia.com/forum/forumdisplay.php?f=121
Forum Nokia provides a wealth of resources to mobile developers. To be informed about the latest on mobile tools, devices and technologies, register at http://www.forum.nokia.com/main/registration/registration.html

Hi all problem with nokia n95

Just got a nokia n95 for xmas yeah lol.
But i am trying to update it. Ok so i have pc suite already so i plug it in via usb cable given. And i get this message.
the name is already in use as either a service name or a service display name".
It did this with my old phone nokia 6270. I can only use the phone in storage mode right now.
I am using windows vista. Any help would be great thanks.

Hi gooseuk
Unfortunately as O2 have been incentivising remaining stock of N95 on v12 software it has been speculated that v20.0.015 will probably never be released under this particular product code, which can be found on label under battery.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Free Nokia MAPS with Nokia N95

Hello,
I have a Nokia N95 device and I wood like to know if it's possible to use the free walk or drive feature with Nokia MAPS on this device
Thanks for answer

When they say voice navigation they actually mean navigation to include voice navigation, so you have to pay to use your phone for navigation. However, unlike other sat navs where you have to pay for map updates, with Nokia Maps, all map updates are free for as long as your license is valid.

Calendar system error (-1) with Nokia N95

Similar Messages

Maybe you are looking for