Calendar time difference after synchronize

I have the 6085 and the 7.1 Suite for Vista. When I synchronize my calendar, the time on the phone is 5 hours earlier than on the calendar. Anybody know how to remedy that?

I have read this thread and here is my problem with a 5300
PROBLEM
When meetings/appointments are synchronized from Outlook to the cell phone the time advances [decreased] by one hour.
Thing I have tried
1) Disabling the PC daylight saving auto update. The meetings/appointment moved up by two hours
2) I have not turned off the cell phone auto update option [I would set time rather that the service provider]
Nokia PC Suite Version; 6.8.xx downloaded and installed. May14, 2008
PC Operating System: XP pro
Service Provider: T-Mobil
PC and cell phone show same time. Cell phone time from service provider, currently on daylight saving time.

Similar Messages

Calendar time difference

Hi, I have a problem, when I sync my Nokia 6300 with my Outlook calendar the appointment time gets changed on my phone to an hour earlier somehow. It has only recently started doing this, it was fine before. I would appreciate any suggestions. Many thanks

check to see that both your computer and your phone are set in your correct time zone. If they are not the same the phone could be trying to make up for the time difference by altering the alarm times by an hour.
You do not say where you are so I cannot give you your exact time zone.
Have you removed your battery from your phone recently and had to reset the time perhaps? This might have caused the problem
iPhone 5 32GB
MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4

Ipad/iphone shifts calendar times +1hr after syncing with Outlook or ical

Hi,
I am having a problem when I sync my (PC) outlook calendar to my iphone(OS4.1) or ipad.(And my wife is having exactly the same problem when she syncs her iphone/ipad with her macbook pro (she uses ical/snow leopard)).
I live in a time zone that is GMT +3hrs. There is no summer time change here. Both devices are set to GMT +3Hrs with no summer time changes / daylight savings.
Every month I upload a calendar electronically to Outlook (from a program called Roster2Outlook) and occasionally enter some data into it manually on my PC and on my iphone/ipad.
The problem is this:-
When I sync my PC with my iphone/ipad the times on the iphone/ipad are always 1 hour later than displayed on my calendar in outlook on my PC. I then have to modify the times on my iphone and take off 1hour. If I enter an event on my iphone it appears in my calendar in Outlook 1 hour earlier (after a sync).
I get several monthly changes to my schedule and then when I update my outlook calender and sync it to my iphone again, all the times appear 1Hr later on my iphone and have to be manually adjusted.
This may seem trivial, but when one event is added on one device and it shows up at a different time on another device, it gets very confussing, as you never know which time is correct in your calendar, as it depends on which device you entered it and whether you synced it or not! I am tearing my hair out.
I also sync my calandar to my ipad, which appears to be doing the same thing.
So, to cut a long story short, any idea's why this is happening and how to fix it? (Please don't tell me I have the wrong time zone set on a device - because I haven't - they are all on the same time zone!)
I did have an idea that I could "shift" the calendar that I electronically upload to Outlook back by 1 Hour, so that the times would be 1Hr wrong in outlook but correct on my iphone and ipad (the devices that I predominantly use) but this still doesn't solve the problem of it being a bodge!
Any ideas / solutions much appreciated. Anyone else having this problem?
Please help!
Cheers,
i eye.

I figured out my iPad sync issue. First of all, I swore up and down I had all my time zone preferences set correctly in both google calendar and on my iPad. I was wrong.
There are two places in google calendar that can cause an issue:
(1) Settings>Calendar Settings>General
(2) Settings>Calendar Settings>Calendars>[Individual Calendar]
There are two places on the iPad to check:
(1) Settings>General>Date & Time (however I think this might not do anything because.....)
(2) Settings>Mail, Contacts, Calendars>Calendars>Time Zone Support (this was the elusive one for me)
But It's fixed now and I'm happy.

Analyzing data for max peak time differences after sampling

In the VI attached, each channel is measuring a certain moment of
acceleration, which will be displayed as a global max on the graph.
Ideally what I would like to happen is for
both arrays to be searched for their highest peak (global max) and for
the time difference between these two peaks to be shown on the display
after the program has ended. However, what I have right now is a
sort-of real time measurement. Any suggestions on going about doing this?
Thanks,
John
Solved!
Go to Solution.
Attachments:
TimePeakTest-cp-2.vi ‏74 KB

Thanks for your help Stephen!
I've made those changes, but after the highest peak from each channel occurs, the time difference indicator shows the time diff. between the two peaks only for a split second, and then the indicator returns back to zero. I would like for this max peak-max peak time difference to somehow remain on the indicator after the program has stopped running, because its value, whether it is below or above a certain constant, will need to indicate a true/false statement.
Any help is greatly appreciated.
Thanks,
John
Attachments:
TimePeakTest-cp-2.vi ‏74 KB

I am having multiple issues with syncing my iphone calendar and outlook There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone I mostly enter items on my laptop

I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
I mostly enter the original items on my laptop
There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone

This sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.

My calendar alert rings after end time

When I set a alert for 5 minutes before on my calendar it rings after my end time, why is that?

To change the default event time go into Tools-Options-Calendar-General and set the duration time.
No menu bar with Tools? Press the alt key.
To be able to change the time when setting the individual event, click on the link icon to the right of the time fields. If the points of the links are touching the duration time is locked to the default. If the points are separated you can set any duration.

Can anyone help me determine why iCloud changes the calendar time of appointments.

Here's my situation: i use an iphone registered/acquired in spain. the phone is unlocked and now carries a t-mobile card, as i am currently in nyc, but all my calendar appointments have a 6 hour time difference from those entered on my mac and vice versa. there are several threads about this issue, all of which point to the various hardware and software settings (time zone support on or off on the iphone as well as on the app on mac and phone). another user mentioned the setting provided for in the icloud calendar function itself, where the proper time zone can be modified. all to no avail, i stil get my 6 hour time difference.
anyone please?
thanksamillion!

Thank you fromsouth, for your interest, but it didn't help.
I have 3 scenarios: Entering an appointment on the mac's calendar, on the phone's, and on iCloud's calendar. If I enter an appointment on the mac, it shows up correctly on iCloud, but is off by 6 hours on my phone's app. If I enter it on the phone's app, it will be off on iCloud and therefore off too on the mac. I've deleted the app (I use WeekCal, but see the same discrepancies on the iCal app) and reset it all new, but the problem prevails. Unlike my earlier assumption that the problem lies with iCloud, I now believe it is in the phone, although wouldn't know where. I see that the iCal app on OS has the ability to adjust for the time zone. When entering the event on the phone, it gets syncronized on the Mac at the phone's time zone, which for some reason appears to be set at my original Spanish setting (GMT+1), even after I reset the time zone to NY. I can manually adjust the calendar time zone setting on my Mac to EST to correct the time for the appointment.
Quite frustrating!

ISync shifts appointments to 1 hour later after synchronization

Hi !
My computer is under Mac OS X snow leopard. The computer clock is set to "summer time" and the timezone is set to GMT+1. The phone is a Sony Ericsson K550im. The phone clock is also set to summer time and the timezone is set to GMT+1. I synchronize it with iSync via bluetooth. The problem is that the appointments in iCal are shifted to 1 hour later. Which means if the appointment is 1:30 PM in iCal. After synchronization, it is recored in the phone calendar at 2:30 PM. That is a problem because I can not trust in the appointments written in the phone.
I found a temporary solution to avoid this problem by setting the phone to GMT+0, and then by setting the phone clock to the current time. But I would prefer to avoid such hacks.
Has anybody any other solution?
Regards,
Xavier

Sony Ericsson phones do not handle the Summer/Winter clocks change very well. Events after the next clocks change will be 1 hour out until that change passes.
If you re-sync after the clocks change now (October), the events should be fine again, until the next clock change in March.
There is no permanent solution to this - it is caused by the buggy Sony Ericsson calendar.

ICloud Calendar Time Issues

Does iCloud not know there is a 1 hour time difference between Brisbane and Sydney, every year between October and April ???
My iPhone and iPad calendars are 1 hour out from iCloud calendar when signed in on Mac, despite being set to Brisbane Time. My Mac has the correct time also. When I re set it using the little map it just keeps defaulting to Sydney, Eastern Standard Time and changing the times I have entered by one hour ? I will contact Apple tomorrow or am I missing something obvious here ?

Try adding a new event on your phone then check your calendar on icloud.com from a computer to see if the event appears there. If not, go to Settings>Mail,Contacts,Calendars>Default Calendar. Here, make sure you have selected an iCloud calendar as your defult (and not something else like On My iPhone, Gmail, Yahoo, an exchange account calendar, etc.) After setting your iCloud calendar as your default, try adding an event again to see if it appears on icloud.com now.
If your default account setting is correct and it still doesn't sync to icloud.com, add any missing events from your phone's calendar to icloud.com. After the calendar on icloud.com is up to date, on your phone go to Settings>iCloud, turn Calendars to Off, choose Delete from My iPhone when prompted, then after a minute or so turn Calendars back to On. Then try adding a new event on your phone again and see if it appears on your calendar on icloud.com now.
Once you phone is syncing properly, go through these same steps on your iPad.

Time difference between the Identity system and Access System: OAM

I was installing OAM. Performed the below steps.
-installed identity server
-installed webpass
-setup of identity system console
-installed policy manager
-setup of access system console
The above steps were successfull. Then when i was logging into Access system console, i am getting the below error:
Error:there was a problem obtaining the userid. One possible reason for this is a time difference between the Identity system and Access systems (Policy Manager and Access system console).+
The Identity Server, WebPass and Policy Manager are installed on the same machine.
Userdata repository: OVD 10.1.4.3
Policy and Config Data Repository: OID 11.1.1.3
OAM: 10.1.4.3
Windows2008 - 64bit
Found document in metalink similar to this issue. suggested to change ldapmaxofreties. but didn't help.
Any idea on this error. Please Advise.
Thanks in advance.

Try this::
Check Time Difference Between Identity and Access Manager Systems
Check the logfile in the Access Manager install directory. The default location is <$AMinstall_dir>/access/oblix/logs/oblogfile.
If the file exists and it contains following line "skew = slack = " that means the Identity and Access Manager Web Servers are on different machines and have not synchronized time within a minute.
Either synchronize times between the two machines within a minute's accuracy or you can increase the slack by modifying these two files: <$AMinstall_dir>/access/oblix/apps/common/bin/oblixbaseparams.lst: loginslack: <$IMinstall_dir>/identity/oblix/apps/common/bin/oblixbaseparams.xml: loginslack: where numofseconds is more than skew found in the oblogfile.
For example, if you have following line in oblogfile "skew = 121 slack = 60", set numofseconds in the two parameter files to 130. After doing this, Stop the Identity Manager Web Server. Then stop the Identity Server. Start the Identity Server.
Then start the Identity Manager Web Server. Start a new browser session and see if you get the same error.

Calendar time zone on iOS 7

the time zone has disappearead on the calendar after updating to ios 7, how can it be defined? I travel a lot and this feature was very helpful in avoiding errors.

You have to enable Time Zone Support under Settings -> Mail, Contacts, Calendars -> Time Zone Support (in the Calendars section at the bottom). If you enable the setting while you are in the middle of creating an event, you have to cancel and re-create it.
Now, when you create a new Calendar entry, it will have a Time Zone field under the End time setting.

Calendar times off by 1 hour

Updated to new version of iTouch software today. After process was complete all of my calendar entry times for my corporate email account are off by 1 hour.

Some things you can check to troubleshoot this include:
Go to icloud.com, sign into your iCloud account, click your name at the top and choose Account Settings, click Time Zone and be sure it shows the correct time zone and that you have selected a city near you. Then open your calendar on icloud.com, click the gear-shaped icon on the bottom left and choose Preferences, click the Advanced tab and make sure you have not checked time zone support at the top.
On your iOS devices, go to Settings>Mail,Contacts,Calendars>Time Zone Support (in the Calendars section) and make sure this is set to Off. If you have a Mac, open the Calendar app and to to Mail>Preferences>Advances and uncheck “Turn on time zone support”.

Send the same message to two receivers with some time difference..

Hi
I want to send the same message to Two receivers with the slight time difference.. becuase but not at the same time.. if the same time means.. just we can specify the two receivers in the one receiver determination..
but if i want to send the same message to Two reveivers with the time difference means..(after sending the message to first receiver.. after some time gap.. i need to send the message to second receiver..
this type of scenarios how can we do.. is it possible to do with out BPM... please suggest me the solution..
Thanks
Jain .P

Hi Jain,
With BPM you can easily do it.
i am giving you the steps:
1)first add a receive strep to get your message
2)then, put a receiver determination step with a multiline receiver container element assigned to its Receivers property.
3)then, put a block in dynamic mode(ie. ForEach/ParForEach mode) and assign the multiline receiver container element to its multiline element and assign a simple(single line) receiver container element to its current line property.
4) add a send step within the block, choose Receivers List in its Receiver From property and choose the current line receiver element in its Receivers property.
5) then add a wait step in the BPM, in its type select Wait Specified Time Period and then mention the duration in your desired time unit.
**Reward points if helpful...
--Sankar Choudhury

Stopping a while loop using the time difference of two tick counts

Hi Guys,
I'm currently writing a code which test how long does it take for a formula node to perform its operation. The program uses a while loop to perform the calculation, and the program stops after calculating when tick count has reached 10 seconds. The program then displays the number of iterations it does in 10 seconds.
So initially I created 2 frames of sequence structure. In my first frame I have my initial tick count, and in my second frame I have my final tick count and the while loop. I used the subtract function and divide the output by 1000 to get the time difference. Then using the comparison function, I set if output > 10 then the program should stop, to do this I linked the output of the comparison function to the stop button inside the while loop.
However, when I tried to run the code, the program just didn't run. Hence I created a similar program which puts the last tick count in new frame sequence. When I ran this code, the program never stopped.
Do you guys have any idea what went wrong with my codes.
Thank you!
Erry
Solved!
Go to Solution.
Attachments:
1. Tick Count.vi ‏27 KB
tickcoun2.vi ‏27 KB

Dataflow!
In both VI's the stop terminal of the while loop is controlled by a boolean whose source is ouside of the while loop. So that loop will either run once, or run forever, depending on the value of the boolean that is calculated before the loop starts and shows up at the tunnel going into the loop.
I would recommend looking at the online LabVIEW tutorials
LabVIEW Introduction Course - Three Hours
LabVIEW Introduction Course - Six Hours

Calendar Time Problem

Hi, When I sync mi iphone 3gs with outlook 2007 calendar, it does, but the time for the event on my iphone shifts by one hour. Example: I create an appointment for today at 3:00PM on outlook, after the sync, it appears at 4:00PM on my Iphone and vice versa: if I create the same appointment on my iphone at 3:00PM, after the sync, it appears at 2:00PM on outlook. I tried everything but nothing worked.
Please Help

Hi pwmgen,
Welcome to Apple Support Communities!
Take a look at the article below and make sure the Time Zone Support settings aren't causing the issue that you are seeing on your iPhone.
iOS: How to adjust Time Zone Support for calendars
http://support.apple.com/kb/ht4576
When using Calendar on an iOS device, such as an iPhone, iPad, or iPod touch, you may notice that Time Zone Support is on by default. Depending on how you intend to use your iOS device, you may wish to either leave Time Zone Support on or disable it.
Time Zone Support is on by default for calendars on iOS. You can check and adjust this setting in Settings > Mail, Contacts, Calendars > Calendars > Time Zone Support.
Time Zone Support will allow you to create and view events in a time zone other than the one currently used by your iOS device (other than the one your clock is set to). If you do not use Time Zone Support, your iOS device will default to the current clock setting. iOS devices that are location aware will automatically set their time zone, date, and time using Location Services. You can verify your current date and time settings in Settings > Date & Time.
To disable Time Zone Support for calendars
Tap Settings > Mail, Contacts, Calendars.
Scroll down to Calendars.
Tap Time Zone Support.
Slide the slider for Time Zone Support to OFF.
To enable Time Zone Support for calendars
Tap Settings > Mail, Contacts, Calendars.
Scroll down to Calendars.
Tap Time Zone Support.
Slide the slider for Time Zone Support to ON.
Tap Time Zone.
Enter your current location or the closest city in the same time zone and tap it when it appears in the results list.
-Jason

Calendar time difference after synchronize

Similar Messages

Maybe you are looking for