Calendar time frame

The default calendar in my BlackBerry 8330 Curve starts the day at 09:00 (9:00am) and ends at 17:00 (5:00pm). However, my average day starts way earlier than nine, and ends way after five.
Is there a way to change the clock limits on the calendar? For example, be able to enter an appointment at 06:00 (6:00am) or at 21:00 (9:00pm)? I contacted Sprint support (bloody useless, in my opinion), and was told that NONE of the Blackberries are able to do what I want, and that the 9-to-5 bnusiness day is unchangeable.
Is there a way to change the defaults for this built-in app, or is there perhaps an after-market (third party) calendar app that will handle this kind of issue?
Much thanks in advance...
Joshua

Here's what I meant to put on the other post:
I have to use times other than the 9:00-17:00 that is default. Go into the menu, choose general options and the first on the list is the time defaults you would like to use. I needed it to start about 5:00 and go until about 22:00 and that's the default setting now.

Similar Messages

Change Calendar Time Range

My calendar only shows a time frame of 9 - 5 daily.... how can I modify this as work hours are more than just 9-5...
Thanks!
GV
Solved!
Go to Solution.

In your Calendar application > Menu > Options > General Options > edit the times associated with Start of Day and End of Day.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Sync Time Frame Settings

During the original 7 months using the Z10 my emails and calendar had synced perfectly with Outlook with the Sync Time Frame of 30 days setting. Yesterday I changed the sync time frame to FOREVER and my SENT emails and sub-folders no longer synced. After changing back to 30 days, most folder synced properly immediately except for the DRAFTS folder which is still not syncing a day later.
Anyone else experience these?
A sync time frame longer than 30 days and shorter than forever would be a huge improvement - i.e.: 180 days, 365 days, 720 days.

It seems many people are having email issues with Windows Live/ Hotmail/ Outlook accounts since the Outlook outage last Thursday...I still can't get my emails to my z10, though I can now access my emails over the browser...

HT201412 After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to

After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to be fixed...Can this bug expected to be fixed in the next update...

Hi 1283ar.
Unfortunately, iOS 7 is too hard to push for the iPhone 4 and therefore has a lot of effects turned off to try to get it to run as smoothly as possible.
However, it becomes better and better with each update coming but it's hard to do anything about the hardware on an already released phones.
If you still have trouble or think they are too hard. My tip is, if so, to restore your iPhone 4 and make a clean setup with no iCloud backup. But all your photos in a photostream so you can access it later.

Calendar time zone on iOS 7

the time zone has disappearead on the calendar after updating to ios 7, how can it be defined? I travel a lot and this feature was very helpful in avoiding errors.

You have to enable Time Zone Support under Settings -> Mail, Contacts, Calendars -> Time Zone Support (in the Calendars section at the bottom). If you enable the setting while you are in the middle of creating an event, you have to cancel and re-create it.
Now, when you create a new Calendar entry, it will have a Time Zone field under the End time setting.

Calendar times off by 1 hour

Updated to new version of iTouch software today. After process was complete all of my calendar entry times for my corporate email account are off by 1 hour.

Some things you can check to troubleshoot this include:
Go to icloud.com, sign into your iCloud account, click your name at the top and choose Account Settings, click Time Zone and be sure it shows the correct time zone and that you have selected a city near you. Then open your calendar on icloud.com, click the gear-shaped icon on the bottom left and choose Preferences, click the Advanced tab and make sure you have not checked time zone support at the top.
On your iOS devices, go to Settings>Mail,Contacts,Calendars>Time Zone Support (in the Calendars section) and make sure this is set to Off. If you have a Mac, open the Calendar app and to to Mail>Preferences>Advances and uncheck “Turn on time zone support”.

How can I execute a command every 10 seconds in a specific time-frame

Hello,
I would like to create a script which in a specific time-frame collects some outputs and also pings every 10 seconds.
To collect the outputs every minute from 22:00PM to 22:10PM I have the following:
event manager applet snmp_output
event timer cron cron-entry "0-10/1 22 * * *" maxrun 30
action 010 cli command "enable"
action 020 cli command "show clock"
action 030 cli command "terminal exec prompt timestamp"
action 040 cli command "show snmp stats oid | append bootdisk:show_snmp_stats_oid.txt "
action 045 wait 5
action 050 cli command "show snmp pending | append bootdisk:show_snmp_pending.txt "
action 055 wait 5
action 060 cli command "show snmp sessions | append bootdisk:show_snmp_sessions.txt "
acionn 065 wait 5
action 070 cli command "end"
To confirm connectivity to the device doing the SNMP polls I would like to execute a ping every 10 seconds in the same timeframe.
Cron seems only to support minutes. Is it possible to combine a watchdog timer + a cron timer?
Can this ping function be incorporated in the SNMP output applet or will I have to write a new one?
Will I need TCL here (I have no experience in TCL)?
Best regards,
Tim

If you wanted the pings to run in parallel, you could have this applet configure another applet to do the pinging, then remove it on the last run. This will require an amount of programmatic logic, though. If you wanted to keep things a bit simpler, add another applet that runs at 22:00 that configures a watchdog pinging applet, then a third applet that runs at 22:10 that removes the pinging applet.
When it comes to embedded quotes when you configure your nested pinging applet, you'll need to use $q to stand for the embedded quotes. You'll also need to configure:
event manager environment q "

Manuals users should not be able to submit a concurrent program at a specific time frame:

Hi
Please let me know is it possible to restrict some users to submit a Concurrent program during a selected time frame .
Eg we have an issue in which Process Lockboxes concurrent Program is submitted by the batch user and is also by the Users manually from Front end .What I want is that during a particular time frame everyday say from 12:00 AM to 6 PM I want to restrict manual users to submit this program ,whereas the Program can be submitted by the Batch user any time .
Please let me if its possible to achieve this and how .
Thanks
Rishabh

Please don't post duplicates -- restrict user to submit concurrent Program
Continue the discussion in your original post.
Thanks,
Hussein

HT1657 after renting a move and starting viewing I can not stop it and come back to in within the time frame. If i stop it it goes away not able to find it. Just like I did not rent it at all.

after renting a move and starting viewing I can not stop it and come back to in within the time frame. If i stop it it goes away not able to find it. Just like I did not rent it at all.

Hi,
We have rolled out a fix for this issue.
Please log off and log back in to your machine and the issue should be resolved automatically. In case that does not work, please manually run the msi installer posted here (may require reboot).
For details, please refer to the KB article here: Multiple RunOnce keys created 11.0.10 and 10.1.13 Acrobat | Reader
Please let us know if you still face any issues.
Thanks,
Ashu Mittal

Calendar Time Issue

I'm having a problem with viewing appointments in my calendar, and since I live in Saskatchewan we don't change our time, and the rest of the phone, including the main time on the phone are correct.
My issue is the "day view" shows everything an hour ahead, including the red line listing 4:18 PM, it's only 3:18 PM.
Also every appointment is listed an hour ahead, had one this morning at 8 AM and it shows 9 AM in the day view.
Even more confusing is when I click and open that calendar item, it shows the correct start time of 8 AM.
Any assistance anyone can provide would be greatly appreciated.
This is very annoying to say the least, especially with all appointments now being one hour ahead in the day view on the calendar...
My time zones settings are correct in the System Settings/Date and Time it is set to Saskatchewan (-6).

By changing my time display to 24 hours, under Settings/Date and Time and then moving the slider to ON for 24-Hour TIME, the calendar time view issues have disappeared.
Unfortunately the text messages are still out by an hour when viewing them individually. The time is correct on the main page when "conversations" are listed and the most recent text message is displayed, but going into each conversation each text message there displays an hour later than it should.
Hopefully this is something that BlackBerry is working on for the next update to the z10 software.

Calendar Time Problem

Hi, When I sync mi iphone 3gs with outlook 2007 calendar, it does, but the time for the event on my iphone shifts by one hour. Example: I create an appointment for today at 3:00PM on outlook, after the sync, it appears at 4:00PM on my Iphone and vice versa: if I create the same appointment on my iphone at 3:00PM, after the sync, it appears at 2:00PM on outlook. I tried everything but nothing worked.
Please Help

Hi pwmgen,
Welcome to Apple Support Communities!
Take a look at the article below and make sure the Time Zone Support settings aren't causing the issue that you are seeing on your iPhone.
iOS: How to adjust Time Zone Support for calendars
http://support.apple.com/kb/ht4576
When using Calendar on an iOS device, such as an iPhone, iPad, or iPod touch, you may notice that Time Zone Support is on by default. Depending on how you intend to use your iOS device, you may wish to either leave Time Zone Support on or disable it.
Time Zone Support is on by default for calendars on iOS. You can check and adjust this setting in Settings > Mail, Contacts, Calendars > Calendars > Time Zone Support.
Time Zone Support will allow you to create and view events in a time zone other than the one currently used by your iOS device (other than the one your clock is set to). If you do not use Time Zone Support, your iOS device will default to the current clock setting. iOS devices that are location aware will automatically set their time zone, date, and time using Location Services. You can verify your current date and time settings in Settings > Date & Time.
To disable Time Zone Support for calendars
Tap Settings > Mail, Contacts, Calendars.
Scroll down to Calendars.
Tap Time Zone Support.
Slide the slider for Time Zone Support to OFF.
To enable Time Zone Support for calendars
Tap Settings > Mail, Contacts, Calendars.
Scroll down to Calendars.
Tap Time Zone Support.
Slide the slider for Time Zone Support to ON.
Tap Time Zone.
Enter your current location or the closest city in the same time zone and tap it when it appears in the results list.
-Jason

IPhone 3G Email and Calendar times off by one hour (slow one hour)

My times which I send/receive emails or put appointments on the calendar are 1 hour slow as compared to my computers. I have Mobile Me and Mobile Me (on the computer) and my Outlook emails and calendars match and my current time is correct on all. On the IPhone 3G the current time is correct but the time a email is sent or received and all appointments on the calendar are both off by one hour (one hour slow on the IPhone 3G).
I have set time automatically in "settings" to on, and under "email contacts and calendar" I have time zones disabled. I have tried each possible combination of these settings but cannot get the email/calendar times to match between my computers and the IPhone 3G regardless of how these are set.
I have numerous computers and all times are correct on all. On the IPhone 3G the current time (the clock) is correct, but times in emails and calendar appointments are all off (slow) by exactly one hour no matter what I do.
Anybody else have this issue, and/or know what the solution might be?
Thanks
The Omega

I have tried that and it did not work. I am now trying it with everything set to enable DST, and see if that works. Everything, so far, seems to be in sync. The phone would be right for a second when you went into the calendar and then change to be an hour off. Strange. I think the settings I have now (all, Windows, MobileMe, and the IPhone 3G set to DSL on, the same) may be working. Only time will tell.
Thank you.
The Omega

FTP Adapter restrict polling frequency active time frame in a day

Hi All,
Is there anyway I can restrict FTP adapter polling frequency to be active during a particular time frame of the day. Say, my service should poll the incoming location for Sales order data for every hour during business hours of the day.
Thanks,
AG

Hi
SOA Suite 12c will expose Oracle ESS as the scheduler.
ESS will allow you to schedule soa composites / OSB services etcand allow you to enable / disable them based on jobs, which is what you desire.
12c SOA Suite is expected later this Summer.
Cheers
iain

Query to calculate time frames

hello,
id like to write a query that will calculate time frames ;
my source table looks like this:
company     category     date
ORACLE     A     1/01/2012
ORACLE     A     2/01/2012
ORACLE     B     3/01/2012
ORACLE     C     4/01/2012
IBM     A     1/01/2012
IBM     A     2/01/2012
IBM     A     3/01/2012
IBM     A     4/01/2012my desired result:
company     category     from     to
ORACLE     A     1/01/2012     2/01/2012
ORACLE     B     3/01/2012     3/01/2012
ORACLE     C     4/01/2012     31/12/2999
IBM     A     1/01/2012     31/12/2999can you please guide me with use of which functions i can achieve that?
id appreciate any tips
thank you
rgds
Edited by: UserMB on Jan 11, 2012 5:14 PM

One way...
ME_XE?with t as
2 (
3    select 'ORACLE' col1, 'A' col2, to_date('1/01/2012', 'dd/mm/yyyy') col3
4      from dual
5    union all
6    select 'ORACLE', 'A', to_date('2/01/2012', 'dd/mm/yyyy')
7      from dual
8    union all
9    select 'ORACLE', 'B', to_date('3/01/2012', 'dd/mm/yyyy')
10      from dual
11    union all
12    select 'ORACLE', 'C', to_date('4/01/2012', 'dd/mm/yyyy')
13      from dual
14    union all
15    select 'IBM', 'A', to_date('1/01/2012', 'dd/mm/yyyy')
16      from dual
17    union all
18    select 'IBM', 'A', to_date('2/01/2012', 'dd/mm/yyyy')
19      from dual
20    union all
21    select 'IBM', 'A', to_date('3/01/2012', 'dd/mm/yyyy')
22      from dual
23    union all
24    select 'IBM', 'A', to_date('4/01/2012', 'dd/mm/yyyy') from dual
25 )
26 select
27    col1, col2, min(col3), case when max(col3) = max_company_date then to_date('31/12/2999','dd/mm/yyyy') else max(col3) end
28 from
29 (
30    select col1, col2, col3, max(col3) over (partition by col1) as max_company_date
31    from t
32 )
33 group by col1, col2, max_company_date;
COL1               COL MIN(COL3)                  CASEWHENMAX(COL3)=MAX_COMP
ORACLE             B   03-JAN-2012 12 00:00       03-JAN-2012 12 00:00
ORACLE             A   01-JAN-2012 12 00:00       02-JAN-2012 12 00:00
ORACLE             C   04-JAN-2012 12 00:00       31-DEC-2999 12 00:00
IBM                A   01-JAN-2012 12 00:00       31-DEC-2999 12 00:00
4 rows selected.
Elapsed: 00:00:00.01
ME_XE?

N8 calendar times change when in new time zone

How do you stop the calendar times changing when you enter a new time zone? This is very frustrating, particularly when the calendar contains flight times etc which you have entered in the local time zone of place of departure. Then when you move into that time zone it automatically changes every calendar entry! Annoying! I realise I can deselect automatic time zones, but then I'm guessing when I do change the time zone manually to where I am (so that it shows the time of day, and I can set an alarm to wake me up, etc!!!) then the same thing will happen - all my calendar entries will change. Hope someone has worked it out already.

the times are stored on the phone in absolute time, lets call it gmt. they are then displayed on your handset in local time.
the times aren't actually changing as you change time zones. they are very much staying the same.
to achieve what you re after you are just going to have to enter the times in one of the text fields.
There's no dignity in begging for kudos. Do it for the karma.

Calendar time frame

Similar Messages

Maybe you are looking for