Calendar Year Bug
I have just finished creating a calendar in Elements 9 using the Create function but didn't notice the year bug (when you select 2011 you get 2010) until I had finished creating the calendar. Having spent ages getting all my photos nicely edited and placed, I only noticed that the year was 2010 instead of 2011 when I had finished. Anyone know how I can change the year without losing all the photos, or create a 2011 calendar (by selecting 2012), and merge all the photos from my 2010 creation into it ? Or do I have to start over again;;;;
I created a calendar and after completion noticed the 2010 date. I am a new Photo Shop user and admit to being fairly clueless as to the ins and outs of PSE! I understand that I need to select 2012 in layout in order to get a 2011 format but I don't know how to do this once a project has been created. I have saved the project but cannot figure out how to get to the screen that allows me to change the calendar year layout. The only way I know to get to the layout screen that allows me to change the year is when you create a new calendar - and I'd like to avoid having to recreate it.
Thanks -
Similar Messages
-
Quota credit on 1st of calendar year for existing employees and for new joinees on prorata basis
Dear All,
we are having an issue in quota generation, where casual leave quota should get credited on 1st of every calendar year and for mid month joiners on prorate basis. If we select calendar year it is crediting on 31st of calendar year, but we need it to be credited on 1st of January and also checking the prorate condition for new joiners.
So please guide on whether it is possible through standard or any work around solution. If so how can it be achieved.
Thanks
VijayaHi,
check this one prorate basis -
http://scn.sap.com/docs/DOC-52928
for you quota on 1st day of calender year, check the settings in the table V_T559L
- Validity/deduction interval
- Validity period for default values
Best Regards. -
Formula for calculating Quarter value in current calendar Year
Hi All,
I have a requirement where in i need to display values for Q1 of Current Calendar Year, Q1 of Previous Calendar Year,Variance in Value and % Variance in Value...Similarly for Q2,Q3,Q4.
We have built the report directly from Bex Query from the SAP tab in Crystal Reports. The formula for Quarter1,Variances etc are defined in Bex Structures and i am unable to get 'em individually here rather i am getting them as a whole in a single object with the structure name. Now is there a way that i can define my own formula in Crystal Reports so that i can get the values for the constraints defined above???
If yes please give me the syntax or an example formula so that i can work around.
please Help,
Thanks & regards,
R.NWhat fields are you getting?
or what is the data you are working with is it
transID, date, value......
or is it
Q1, Year1, Value....... -
Absence Quota Generation begining of Calendar Year
Hello Experts,
Although the said requirment has been already posted in SDN, could not see any solution for this from the threads.
I have a requirment to Generate Absence Quota i.e Annual Leave at the begining of the year, precisely when i run Time Evaluation on 01.01.2011 system should generate the Quota in advance for the Calenday year.
I could generate via Report RPTQTA00 but the same is not happening in TE, even i tried with all Accrual options like Calendar Year, Monthly, Payroll Period, Base Period etc but system picking only the last day of the month or year.
I am wondering if some potential solution would have released from SAP during EHP 4 and 5
Kindly help me with your expertise
thanks
GitaHi Vivek,
i am facing the following senio can you please provide and document with pcr. I dint find the solution in SCN so please provide solution ASAP...
I have one senario in TIme management ....
Employee have 1year probation period ,but he is entiteled for taking leave after 1 year . that to leave should be accured for calender years after probation period. & henceforth it should accur per calender year.
For Example: Employee have joined on April 2011 ,Then his leave should be accured after April2012 upto Dec 2012 & then for next year 2013 leave should accure from Jan 2013 to Dec 2013.
Please help me to map the senario with detailed configuration steps
Pls help me out here the requirement is immediate. -
The old calender iOS6, in the year view, it shows how much busy I am in a day by indicating the color intensity. But the new calendar year view is totally useless!!! also too bright!! Why apple does this?? What is the way to revert the calendar back???
Unfortunately, that's the way the cookie crumbles nowadays. Sir Jony Ive's GUI design for iOS7 has been met with much skepticism (to say the least). But until the company sees the compelling need for an adjustment or reversal, it "ain't happenin' ". So amble over to the feedback page ( http://www.apple.com/feedback/ ) and make your displeasure known to the company, OR make it known by not purchasing its products. Because as long as the iGadgets continue selling as fast as they can make them, they will see no need for change.
BTW, do note you are NOT talking to Apple here. This is just a user-to-user forum.
Edit: for now, you can also try out any of the alternate calendaring apps available in the App Store. -
Calendar day and Calendar Year/Week mapping
Dear SDN,
I am unable to view Calendar Year/Week and Calendar Day ...Data..
I have observed that they have not mapped in the Update rules of 0SD_C03 InfoCube...
I have checked all the InfoSources (2LIS_11_VAHDR, 2LIS_11_VAITM, 2LIS_11_V_ITM, 2LIS_12_VCHDR, 2LIS_12_VCITM, 2LIS_13_VDHDR, 2LIS_13_VDITM)...
There in all the Update Rules...
Update Rules -- Details -- Time Ref.---
Time Characteristic of Fiscal Year Variant is mapped with Source fields of Fiscal Year variant
similarly,
Calendar Year/Month is mapped with Update Date Statistics
But Calendar Year/Week and Calendar Day are Blanck...
I am thinking they also should be mapped..
Please suggest me how to resolve this...
Help will be greatly appreciated with points..
Thanks in advance..
This is very urgent...Thanks...
But i have already assigned my self...
0calyear/week to Update date statistics...
and
0calendarday to Update date statistics..
I have assigned points to you...
Thanks for your informatioon -
Unable to view the Calendar Year/Month in the Query
Hi All,
We are having a standard query on Customer InfoCube 0sd_c01_q0003.
I was able to get the data. But I am unable to view the Calendar Year/month. In that place I am getting '#'.
I am able to view the details in the InfoCube. There aren't any errors while executing the error.
Regards
YJhi,
U r Problem is not clear...if u r getting # for characteristic values means..u don't have data in Infoprovider...try to view data in InfoProvider with the same selections that u r executing the Query with.
thnaks -
Ios 7 Calendar year view lost gradient colours
Noticed that on ios 7 the calendar year view no longer shows the gradient colours.
This was very cool feature so you could have an overview of how busy was my agenda.
Any idea if this is a setting that needs to be activated somewhere or is it totally gone?
If not year view seems pretty useless...When you restarted the app did you quit it first?
I would first quit the app then reset the phone.
Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app.
Then press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem. -
Fiscal year variant is not maintained for calendar year 2009
Hi,
After upgrade to BI 7.0 we are getting error: "Fiscal year variant & is not maintained for calendar year 2009" while opening a query through Bex Analyzer.
Basically it is happening like when we open a particular query, the Variable selection screen comes up, then on clicking the exection button (after selection) it shows SYSTEM_FAILURE exception & clicking the details button, shows the message ""Fiscal year variant is not maintained for calendar year 2009"
Please provide some information/resolution to this.
Thanks,
Shantanu.HI,
Please ensure that you have defined your fiscal year variant in OB29
correctly. It is necessary that:
1. the previous year has been maintained,
2. an entry for Dec 31 exists in each fiscal year,
3. the following fiscal year has been maintained.
Hope this helps.
Regards,
Nitin -
Only activities of the current calendar year are shown in plannend act.
Hello Techies,
We are using the 2007 UI and I have the following problem. Only activities of the current calendar year are shown in plannend activities and interaction history.
SAP probably made a query only showing a set of data (current year) for performance reasons. I would like to change this in the last 6 months. My users can not see there activities of last week since it only shows 2009.
How can this be changed?
Kind regards.
FrederikFrederik
You can control this by maintaining the view:
CRMV_ACC_1O_CUST
Or in the IMG:
CRM->Master Data->Business partner->Specify Display Options for Business Transactions
Take care,
Stephen -
Selective deletion based on Calendar Year/Month in process chains
Hi all,
I have a requirement from the business wherein I have to delete the past months data before I load the same data into 6 infocubes using a process chain.
I checked the forums to understand how selective deletion is used in a process chain and I have come to know that RSDRD_DELETE_FACTS program or DELETE_FACTS Tcode can be used to generata a G* program that performs the deletion.
I am to integrate this generated program in my process chain. I have 0CALMONTH(Calendar Year/Month) as the time characteristic in all my infocubes and therefore the only time characteristic available for selective deletion.
My problem is that I am unable to create a dynamic selection for the Calendar Year/Month such that it takes the previous month.To be exact I am unable to use the "D" option in the Selection Variable column for this characteristic.
Please can somebody help me out with this.Hi,
Use this ABAP program code in your Process Chain...
Type Pools
TYPE-POOLS: rsdrd, rsdq, rssg.
Local Internal Tables
DATA: lit_msg TYPE rs_t_msg,
lit_sel TYPE rsdrd_thx_sel.
Local Work Area
DATA : lwa_sel_kf1 TYPE rsdrd_sx_sel,
lwa_range_kf1 TYPE rsdrd_s_range.
Local Constants
CONSTANTS : lc_i(1) TYPE c VALUE 'I',
lc_x(1) TYPE c VALUE 'X',
lc_eq(2) TYPE c VALUE 'EQ',
lc_kf1(11) TYPE c VALUE '0CALMONTH'.
CONSTANTS : lc_cube TYPE rsddatatarget VALUE 'Z_C21'.
Delete Existing cube records
Key Field 1 (CALMONTH)
lwa_range_kf1-sign = lc_i.
lwa_range_kf1-option = lc_eq.
lwa_range_kf1-high = space.
lwa_range_kf1-keyfl = lc_x.
lwa_range_kf1-low = <Value of CALMONTH>.
APPEND lwa_range_kf1 TO lwa_sel_kf1-t_range.
CLEAR lwa_range_kf1.
lwa_sel_kf1-iobjnm = lc_kf1.
INSERT lwa_sel_kf1 INTO TABLE lit_sel.
CLEAR : lwa_sel_kf1.
Selective Deletion through FM
CALL FUNCTION 'RSDRD_SEL_DELETION'
EXPORTING
i_datatarget = lc_cube
i_thx_sel = lit_sel
i_authority_check = space
i_mode = lc_c
i_no_enqueue = lc_x
CHANGING
c_t_msg = lit_msg
EXCEPTIONS
x_message = 1
inherited_error = 2
invalid_type = 3
OTHERS = 4.
IF sy-subrc = 0.
REFRESH : lit_sel[],
lit_msg[].
ENDIF.
Thanks,
Saru -
Hi All
I have a table which contains a calendar period and fiscal period. I want to use one table only, no alias to bring back all the periods in the current calendar year e.g 200701 which is January to 200712 which is December and also to bring back all periods from the current fiscal year e.g. 2007/08-01 which is April 2007 to 2007/08-12 which is March 2009 so my result set should look something like below
Calendar Period Calendar Month Fiscal Period Fiscal Month
200701 January 2007/08-01 April
200702 February 2007/08-02 May
200703 March 2007/08-03 June
200704 April 2007/08-04 July
200705 May 2007/08-05 August
200706 June 2007/08-06 Spetember
200707 July 2007/08-07 October
200708 August 2007/08-08 November
200709 September 2007/08-09 December
200710 October 2007/08-10 January
200711 November 2007/08-11 March
200712 December 2007/08-12 April
Can I restrict one table to bring back both of these?Below is what i am using at the moment for testing before i create the table. A table has not yet been created for this yet but this is the format I was told is needed
select
'200701' as period, '200701' as quarter, 'January' as month, '2006/07-10' as fiscal_period, '2006/07-04' as fiscal_quarter
from dual
UNION
select
'200702' as period, '200701' as quarter, 'February' as month, '2006/07-11' as fiscal_period, '2006/07-04' as fiscal_quarter
from dual
UNION
select
'200703' as period, '200701' as quarter, 'March' as month, '2006/07-12' as fiscal_period, '2006/07-04' as fiscal_quarter
from dual
UNION
select
'200704' as period, '200702' as quarter, 'April' as month, '2007/08-01' as fiscal_period, '2007/08-01' as fiscal_quarter
from dual
UNION
select
'200705' as period, '200702' as quarter, 'May' as month, '2007/08-02' as fiscal_period, '2007/08-01' as fiscal_quarter
from dual
UNION
select
'200706' as period, '200702' as quarter, 'June' as month, '2007/08-03' as fiscal_period, '2007/08-01' as fiscal_quarter
from dual
UNION
select
'200707' as period, '200703' as quarter, 'July' as month, '2007/08-04' as fiscal_period, '2007/08-02' as fiscal_quarter
from dual
UNION
select
'200708' as period, '200703' as quarter, 'August' as month, '2007/08-05' as fiscal_period, '2007/08-02' as fiscal_quarter
from dual
UNION
select
'200709' as period, '200703' as quarter, 'September' as month, '2007/08-06' as fiscal_period, '2007/08-02' as fiscal_quarter
from dual
UNION
select
'200710' as period, '200704' as quarter, 'October' as month, '2007/08-07' as fiscal_period, '2007/08-03' as fiscal_quarter
from dual
UNION
select
'200711' as period, '200704' as quarter, 'November' as month, '2007/08-08' as fiscal_period, '2007/08-03' as fiscal_quarter
from dual
UNION
select
'200712' as period, '200704' as quarter, 'December' as month, '2007/08-09' as fiscal_period, '2007/08-03' as fiscal_quarter
from dual
union
select
'200801' as period, '200801' as quarter, 'January' as month, '2007/08-10' as fiscal_period, '2007/08-04' as fiscal_quarter
from dual
UNION
select
'200802' as period, '200801' as quarter, 'February' as month, '2007/08-11' as fiscal_period, '2007/08-04' as fiscal_quarter
from dual
UNION
select
'200803' as period, '200801' as quarter, 'March' as month, '2007/08-12' as fiscal_period, '2007/08-04' as fiscal_quarter
from dual
UNION
select
'200804' as period, '200802' as quarter, 'April' as month, '2008/09-01' as fiscal_period, '2008/09-01' as fiscal_quarter
from dual
UNION
select
'200805' as period, '200802' as quarter, 'May' as month, '2008/09-02' as fiscal_period, '2008/09-01' as fiscal_quarter
from dual
UNION
select
'200806' as period, '200802' as quarter, 'June' as month, '2008/09-03' as fiscal_period, '2008/09-01' as fiscal_quarter
from dual
UNION
select
'200807' as period, '200803' as quarter, 'July' as month, '2008/09-04' as fiscal_period, '2008/09-02' as fiscal_quarter
from dual
UNION
select
'200808' as period, '200803' as quarter, 'August' as month, '2008/09-05' as fiscal_period, '2008/09-02' as fiscal_quarter
from dual
UNION
select
'200809' as period, '200803' as quarter, 'September' as month, '2008/09-06' as fiscal_period, '2008/09-02' as fiscal_quarter
from dual
UNION
select
'200810' as period, '200804' as quarter, 'October' as month, '2008/09-07' as fiscal_period, '2008/09-03' as fiscal_quarter
from dual
UNION
select
'200811' as period, '200804' as quarter, 'November' as month, '2008/09-08' as fiscal_period, '2008/09-03' as fiscal_quarter
from dual -
Changing from a Fiscal year to a calendar year
Hi Everyone,
We need the supporting documentation, guidance to change from a Fiscal year to a calendar year. Also please share your experience, suggestions, thoughts on this?
Currently, our year-end is SEP 30th, now there is a requirement to change the year end from SEP 30th to DEC 31st.
N:> Keithley GL Superuser USA > Setup > Financials > Calendars > Accounting
Calendar is already associated to the set of books and the budget year for 2011 is already opened in the Production instance
We entered the budget through a spreadsheet upload using ADI. We can roll back the budget and reenter if required
We have already gone through the metalink note IDs 102460.1, 134362.1, and also the below document from Oracle Support
http://download.oracle.com/docs/cd/E15799_01/books/OnDemOLH/index.h...,
Below are our open questions at this point
1) Can you please let us know what would happen if the transition closes on the middle of the month
Example: We will close the month end, year end at the end of the month but what would happen if we close at the middle of the month (say DEC 15th instead of DEC 31st)
2) Will it be short? From 1st October 2010 - 31st December 2010.
Or will it be long? From 1st October 2010 - 31st December 2011.
Can you please let us know the pros and cons for each of these?
3) According to the Metalink note Id 102460.1, the application will prevent you from making changes to calendar the unless you meet the following qualifications:
a) All the periods to be changed have a status of Never Opened.
This condition does not match to the current situation at the clients place as we don’t have the status "Never Opened" for any of the periods in the accounting calendar in
subledgers
b) A budget year that includes the periods to be changed is no t yet opened.
Budget year is already opened for the year 2011 at the clients placec) An encumbrance year that includes the periods to be changed is not yet opened.
“Encumbrance” is not applicable at the clients placed) The periods to be changed have not yet been copied from the GL Calendar to Project
“Projects” is not applicable at the clients placeThanks
VeenaPl post details of OS, database and EBS versions. Pl see if these MOS Docs can help
How to change GL Calendar from a Fiscal to a Calendar year? (Doc ID 102460.1)
CHANGING SET OF BOOKS CALENDAR FROM CALENDAR YEAR TO FISCAL YEAR (Doc ID 1060624.6)
R12: Is It Still Possible To Change GL Calendar From Fiscal to Calendar Year In Release12? (Doc ID 836263.1)
General Ledger Calendar FAQ (Doc ID 134362.1)
HTH
Srini -
Longstanding Exchange Calendar Sync Bug Persists in iOS 7 / 7.0.2
For those who sync their iPhone / iPad / iPod touch to a Microsoft Exchange e-mail environment, you may be aware that there's a longstanding Exchange Calendar Sync bug (affecting iOS 4.x - 6.1.3). An otherwise functional iDevice may suddenly remain warmer to the touch than normal, exhibit much shorter battery life, and start using cellular data at up to ten times the user's typical pattern. I've taked with Apple Support several times, and was never able to get an answer. The fix involves simply opening the Exchange account settings on the iDevice, shutting off calendar sync for thirty seconds, and turning it back on. This is nothing new.
Over the weekend, an executive’s iPhone 5 (on Verizon) and his iPad 2 (Wi-Fi only), both running iOS 7, began exhibiting runaway connections to my employer’s Microsoft Exchange ActiveSync server. The user upgraded his iPhone 5 to iOS 7.0.2 over the weekend, but the problem persisted. In one 24-hour period, his iPhone checked in with our server 45,009 times, while his iPad connected 55,547 times. Normally we’d expect to see a single device connect a few hundred times per day rather than tens of thousands.
I've written more about it here.This is still a problem in iOS 7.0.4 as well. We just had runaway calendar sync behavior on a 4th generation iPad running iOS 7.0.4 (iPad3C4/1102.55400001), which connected 75,436 times in a single 24-hour day.
-
Fiscal year variant Z1 is not maintained for calendar year 2012
I am getting this error while scheduling infopackage for 2lis_02_HDR.
Fiscal year variant Z1 is not maintained for calendar year 2012
PLease let me know how to solve thhe issue.
Thanks,
harika.Hi,
Where are you geting error, before execution or duing execution of DTP in the log.
Check if you have transferred fiscal year variants from source system to BW. Then trigger DTP.
Regards,
Pravin Karkhanis.
Edited by: Pravin Karkhanis on Oct 18, 2011 4:15 AM
Edited by: Pravin Karkhanis on Oct 18, 2011 4:15 AM
Maybe you are looking for
-
I can onto anything else on the internet but i cannot get my school web age top load. I can get to the sign in page but when i sign in it just keeps coming up a blank page and does not open. i get no error message with this problem. i was just on thi
-
How Can I Find Out If Someone Is Spying On My Macbook?
How can I find out if someone is spying on my macbook? It's about 5 years old and I think someone is remotely controlling it even though my remote management and screen sharing is always off in the Sharing panel in Systems Preferences. I don't SH
-
Concatenate with 'tab' delimiter in Unicode system
Hi All, In current system we have a program that creates a tab-delimited file with following code where wa1 and wa2 are character-type fields. data: delim type x value '09'. (a tab in hex) concatenate wa1 delim wa2 into wm_lstfil. Unicode system wo
-
Software Change Management - usage in SAP
Hi, Please anybody can - Are we using version control tools like ration rose, SCM Software configuration Management in SAP? Thanks in advance Swamy
-
My OfficeJet 6110 will print (with errors) with Yosemite but will not scan
I just finished reading this entire thread: http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Mac-OS-10-10-Yosemite-and-HP-Printer-Support/... I have rebooted the computer; repaired disk permissions; deleted and added the 6110 back; dowloaded th