Calendar Year variable is not showing listed values
Hi,
I have a query which I am running based on the standard variable ( 0CALYEAR ) input. When I run first time it shows the list of values in the selection editor and displays the result. But after executing when I am trying to change filter values in the output, it doesn't show list values as well if I enter manually, I am not getting the result. I am getting out put no data available....
I created new variables on 0CALYEAR info object, but same problem. My query structure is
In rows I just defined Calendar Year / Month ( so that I can get all months for that user entered Year ).
In Columns I defined one Key Figure.
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Mar 8, 2012 8:39 AM
Problem is resolved my self. Removed 0CALYEAR from Char Restrictions to Default.
Thanks
Ganesh Reddy.
Similar Messages
-
Subject: Why Restricting Calendar Year/Month Does not show some process cha
I am struggling to figure to how to debug BEX queries. I am on BI 7.0.
I am developing a query on 0TC_C21.
1. I want output like:
Process Chain Id: Average Duration
When I run this query for an interval on 0CALMONTH (01.2009 u2013 12.2009), I get all the
Process chains executed and their average duration.
2. Now I want to see Average Duration for each month. I simply put 0CALMONTH on top of the key figure Avg Duration. I now do see
Process Chain Id: Avg Duration 01/2009 Avg Duration 02/2009 u2026. Avg Durtaion 08.2009
But problem is only some process chains are shown. Why? In the output, I do see for some process chains there is no Avg Duration, e.g. in 01/2009 because process chain was never run.
So, I do not understand why some process chains are not being shown.
I know for sure that process chains not being shown were run in 08.2009.
Appreciate any feedbacks, in particular how to debug this problem.Thanks for the assistance!
The feed is here: http://gats.podomatic.com/rss2.xml
The store URL is: https://itunes.apple.com/us/podcast/gaming-and-then-some/id744125948 (the same you got in Google)
And that what is confusing me. As far as I know, the URL should not have changed from the one I received when the podcast was approved last year. The feed seems fine. It's still updating when I load up episodes to Soundcloud. I'm stumped. Any ideas? -
Is there a way to have last years Google calendar on my pc NOT show up on my ipad?
Is there a way to have last years Google calendar on my pc NOT show up on my ipad? I need to keep a record of it for business purposes, but I need to free up some memory on my ipad.
Sorry, had to sep out. I see the contacts "page" but I can't use the letters on the left margin or a finger touch to change location. Nor does anything happen when I touch the plus sign to allow me to add a new contact. So maybe he actual old contact data is still there I just can't get to it. Rick
-
SelectOneChoice not showing all values from database
Hi!
I have to put a list of values in my select one choice. When I do the query in database, all the values are selected. But, with the same query on JPQL, the select on choice do not show all values in database. Anyone can help me, please?
P.S.: I am using SelectOneChoice with SelectItems, in JDeveloper 11g
Code:
<af:selectOneChoice id="selAction" value="#{row.idCmd}"
unselectedLabel="<Selecione>">
<af:forEach var="alertTypeNode"
items="#{bindings.actionFindAll.iteratorBinding.allRowsInRange}">
<af:selectItem value="#{alertTypeNode.dataProvider.idCmd}"
label="#{alertTypeNode.dataProvider.nmCmd}"
id="si1"/>
</af:forEach>
</af:selectOneChoice>In your page binding check the rangesize setting for the executable you use - set it to -1.
-
Hi Gurus,
I am working on some reports in WAD.
I have characteristic "Region" which has 4 values like EAST,WEST,SOUTH,NORTH. This is a User Entry so I created a variable for this and it shows the values with check boxes beside it when you click on the variable entry screen input help. Once I execute the query the result is displayed. When I click on the Filter ICON on the Navigation Block for REGION it is not showing the Values for this region but just shows only 4 check boxes.
This Characteristic doesnot have master data. It is displaying the KEY values.
For the characteristics which Master Data it is showing the values both in Varaible selection screen and also in Filter Selections.
Please update me with a solution.
Thanks,
Rajhave you tried replacing it with the file essbase.bak_startup file, instead of the older essbase.sec file?
If you check your app folders you will still be able to see the cubes you had created its just that Essbase can't pull those up with the older .sec file.
The essbase.bak_startup file is always updated everytime the Essbase server is started up.
Be sure to take a backup of the file before starting up the server again.
The reason your essbase.sec and essbase.bak files are both corrupt is because when you first discovered that the essbase.sec file is corrupt it was when you started the server up.
What you need to keep in mind if the machine which holds the essbase server shuts down abruptly or crashes (which usually leads to the situation you are in) is to never start up the Essbase server right away, as you may have a corrupt essbase.sec file, and if you start up the server without taking a backup of the essbase.bak file you may risk corrupting the essbase.bak file as well.
This is because at start up the essbase.bak file gets replaced with the essbase.sec file.
let me know if this works.
Regards,
Anindyo -
I put a calendar event into my iPhone (using iCloud calendar) but it does not show up in my Outlook iCloud calendar. Any idea what i am doing wrong?
Are you sure that you put the event on your iCloud calendar? You might want to check Settings>Mail,Contacts,Calendars>Default Calendar to be sure you have selected the calendar listed under your iCloud account as your default.
-
IOS 7 Calendar Day View does not show any all-day events ?
Hi,
I realize that iOS 7 Calendar Day View does not show any all-day events.
Is this a bug ?
Any help given is much appreciated.
Thanks and Regards.Mine brings me right up to the current time, or in the case of another day, it takes me to the first appointment of the day.
-
Report similar to MC$4 that does not show absolute values
Hi all,
We need a report similar to Report similar to MC$4 which has the same drilldown capabilities but does not show absolute values, and instead shows the proper (actual) values.
Or if its possible to change something in the MC$4 report to show the actual values and not the absolute.
Thanks in advance!
GeorgeHI
Your input criteria should contain all plant numbers and the period to be analyzed. Execute the report and then select: Plant Analysis\Export\Transfer to XXL\Deselect all options and tick Plant, Storage Location and Month. Follow the options to export to Excel. Report will be based on Plant, Storage location and Month.
Regards -
ME23n , Does not shows the values correctly in print preview
Hi,
When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
If its 2 or more words, it shows correctly.
If its 1 word, then its not showing!
Why it is happening like that? Any ideas how to resolve this issue?
regards.
zerandibIt turns out that this problem went away after the program crashed. Everything seems to be working well now.
-
Using transactio code to execute a report does not show default value
Hi all ,
I have given a default value of a field on my selection-screen by initialization in a hr report .
I am using PNP database and default selction-screen in hr report category .
While the report is working fine while executing directly , It is not showing default value when executed through a transaction code .
Can any body tell why it is so ?
Thanks & regards
SunDid you create the transaction as a report transaction?
Rob -
OBI columns not showing distinct values.
Hi,
Please help me out with the below issue.
I have a colulmn called Product Type. Same column is been pulled into many subject areas. In one of the subject area the column when checked for all product types, it is not showing distinct values, instead it displays multiple rows of sinlge value. Whereas in other subject areas it dsiplays distinct values.
So please help me out on this issue.
Thanks,
Rajesh SHi,
I don't think it's not an issue with not selecting "Select Distinct Value" checkbox .. because same column pulled into to other subject areas working fine. But here also sometimes it shows correct distinct value and sometimes all values(Duplicate values).
Thanks,
Rajesh. -
PO not showing committment value
Hi All,
I am an FI consultant. We have a issue where PO is not showing committment value. Could you please sugget what can be the possible reason.
Regards
DeepakHi All,
further to add this:-
Our PO value is 815525 GBP & invoice value is 744707.52 GBP.
our PO qty is 1 & invoice qty is 3.
Please help.
Regards
Deepak -
PO not showing commitment value
Hi All,
We have one issue where PO is not showing committment value. Could you please guide whether this can be becasue of any problem in WBS element or cost element.
Please suggest.
Reagrds
DeepakHi Deepak
1. Check if Commitment Management is active in Contr Area (OKKP)
2. Check if Commitment mngt is active in Project profile / WBS element
3. There is a program for Int Orders, RKANBU01 which updates missing commitments for Int Orders.. Its called RECONSTRUCT AVAILABILITY CONTROL
See if RKANBU01 or similar program is there for WBS also
Br, Ajay M -
Query is not showing the values - authentication error
Hi,
After running a query it is not showing the values and showing <b>"You do not have the authorization for the selected component."</b>
Diagnosis
You do not have the authorization for the selected component.
System response
The selected component cannot be edited.
Procedure
lease speak to the person responsible for authorization, if you require authorization for the editing of this component. The function is protected by the object "Business Explorer - components" with the following fields:
InfoCube ZPLAYOPPT
Type of a component REP
Component PLAYBOOK_OPPT_1
Activity 16
Notification Number BRAIN 800
<b>Can u pls tell me the solution.</b>Thanks and Regards,
Giri.Go to SU01, look at your authorization profile for which roles you are given. Then, go to PFCG and check out the roles and how they are defined. It is possible that you are not authorized to view application area, infocube, certain characteritics etc.
Hope this helps,
Regards,
Petter -
Netweaver 04s F4 on Fiscal Year / Period Variable does not retun any value
Netweaver 04s
F4 on Fiscal Year / Period Variable does not retun any list. When I tried to run the same query in RSRT, It gave a screen where it stopped at a break point.
62 *_____________________________________________________________________
63
64 * error in >> l_repid <<
65 * >> l_include <<
66 * >> l_source_line <<
67 *__________________________^^^^^^^^^^^^^^_____________________________
68 BREAK-POINT. "#EC NOBREAK
69 l_message = rs_c_true.
70 ELSE.
71 CALL FUNCTION 'RRSV_SYSTYPE_GET'Press F5 after that..lets see wat happens to it.
and tell wat value is there in your 0FISVARNT infoObject.
Regards,
San!
Maybe you are looking for
-
Can I get my Sprint 4S to work on Tmobile?
Ok, here are the facts: iPhone 4S sold by Sprint has both CDMA and GSM capabilities. Sprint will unlock your iPhone for international GSM use, but not for domestic carriers like ATT, Tmobile, or even CDMA Verizon. My iPhone 4S has been unlocked by Sp
-
Exception while perfroming Java mapping in XI
Hi there, Im doing some java mapping in XI using the standard/classic DOM and JAXP packages, I have tested everything outside XI and the code seems to be OK. However when I deploy the code into XI self and run a test, something goes wrong. This is th
-
Changes are not reflecting in other users
HI all it's urgent One user abcd who had made some changes is not reflecting to other users after transport, we have 2 clients 100 and 200 ,changes are reflecting in own user id ,we transported with scc1 transaction with regards vinod
-
Unable to download unpdates for older apps
I got my apps on my iPod with an old e-mail address that I don't use anymore and I just set up my new iPhone4 with a new address. iTunes won't let me update the apps, now. It says that I must update my credit card info, but I am not trying to buy any
-
I disabled my cousins iPhone by pressing random numbers until his iPhone said ; iPhone is disabled connect to iTune ; in red on his front screen. He is in a different province for a month from where he last backed up his iPhone. We tried connecting i