Calender does not work between IOS5 and IOS4.3 iPad

We have two iPads. One is unfortunately on IOS5 and the other is on IOS4.3. When i activate the calender on both devices the shared calender is seen on the IOS4.3 iPad but not on the IOS5 iPad. Whatever i try using google accounts or iCloud it only works one way. Seems like another bug in IOS5? The CalDav fucntion that is proposed on multiple answers does not seem to work at all on the IOS5 iPad, it simply does not accept the password. Is there a simple way out? Or would i need to upgrade the second iPad also to IOS5 as i cannot downgrade the first iPad back to IOS4.3?
help...

The iOS 4 device will not be able to use iCloud, of course.
As to Google calendars, I found that there's something different about how Calendar works in iOS 5.  I had a couple Google calendars that I was subscribed to in iOS 4, but when I upgraded, those calendars stopped updating, and I could not figure out for the life of me where those calendars were defined.  I ultimately had to remove them and then re-add them in Settings > Mail, Contacts, Calendars.  Click Add Account, and if you only want a calendar, click Other, then Add CalDAV Account or Add Subscribed Calendar.

Similar Messages

  • WCCP does not work between WSA and ASA

    I have configured WCCPv2 between WSA S160 (         6.3.1-025) and ASA5540 (8.2(1)109).
    Everything seems to be OK by "show wccp *" on ASA and showing wccp debugging messages (level 4) on S160. Despite of it, WCCP redirection does not work.
    If I use packet-capture I figure out that S160 receives GRE packets with TCP SYN from particular LAN host to WWW sites but S160 does not handle them and does not send anything back to ASA.
    It is an Exempt from authentication for this LAN host and in Forward proxy mode everything works well.
    I have attached an example of a packet-capture (S160.txt - renamed from .cap) and debugging messages from S160 & "show" from ASA.
    Does anybody have any idea what the problem is and how I can resolve it ?

    IronPort Support team helped me to find the trouble:
    If I wish to handle specific port's (80, 8080, etc.) traffic by the transparent proxy I need to configure this port like a listener for the FORWARD proxy
    ("Security Services" -> "Proxy Settings" -> "HTTP Ports to Proxy")
    The WSA guide doesn't clearly say about it.
    So the Discussion can be closed ...

  • Airdrop does not work between Mac and iPhone

    Hi,
    i have an iMac 27" late 2013 with OSX 10.10.1 on it and an
    iPhone 5s with iOS 8.1.1 installed.
    Both have WiFi and Bluetooth turned on.
    The iPhone can see all other iPhones around me but neither my iPhone nor alle the other iPhones can see my Mac and visa verse.
    I could not yet test if the Mac is able to see any other mac in Airdrop because i have no other Mac around.
    I already did a PRAM reset but that did not help.
    Any suggestions?

    I think you have to be running the same OS on those two devices in order for AirDrop to function properly.
    Aidrop is pretty much usless unless you are in a need to transfer files between your macbooks and iMacs and vice versa; how many average OS users have two macbooks or two iMacs????
    But that's why a great number of Apple users would like to transfer their stuff from their iPads and their iPhones to their Macs every day. I really hope this is on the to-do list by Apple, otherwise it would be shame not to have Airdrop that is cross-platform functional.

  • Tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

    tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

    Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • My iMessage is not working between mine and another's iPhone. What can I do to fix it?

    My iMessage is not working between mine and another's iPhone. What can I do to fix it?

    What does not working mean?

  • Facetime not working between USA and Thailand

    Facetime does not work between my iPhone4 and new iPod Touch via USA and Thailand but works fine locally.

    Abpd08-
    It sounds like you are having a problem with the WiFi link(s).  For each iPad, unplug the WiFi router for a few seconds.  Then reset the iPad's network.  Go to Settings-General-Reset-Reset Network Settings.  You will need to reconnect the iPad to WiFi.  (If both iPads use the same WiFi router, you only need to unplug it once.)
    Fred

  • I downloaded today 09.19.2013 iOS 7 on my iphone 4 and iPad retina. Unfortunately on the camera app the switch from photo to video does not work neither on iphone nor on ipad. Is it a "youth" bug ?

    I downloaded ios 7 today 09.19.2013 on my iphone 4 and ipad retina 3hrd generation 64g . The switch from photo to video on the camera app does not work neither on iphone nor on ipad. Is it a "youth"bug ?

    Did you try swipe up and down to change?

  • My av adaptor does not work. Tried to plug my ipad into my samsung hd tv and ipad said it does not support that accessory...help

    My av adaptor does not work. Tried to plug my ipad into my samsung hd tv and ipad said it does not support that accessory...help

    What ipad,  which model samsung?  Are you attempting HDMI, VGA, or an RGB connection.  Ipad 2 supports mirroring into an HDMI at an output of 1080.  Ipad 1 is limited to only a few apps capable of the output, such as Youtube.
    page64,65 of the latest ipad manual has more details.
    Samsungs are good and should switch with the input - but sometimes you will have to select from the menu manually.
    If in doubt, contact the customer support at samsung UK.
    Also check - Settings/Video, that you have it enabled for Home Sharing.  Apple Id  which will be your .me.com  email plus your apple ID password.  I am not too sure about  this as I cannot remember the exact order I set things up in - but page 89 of the manual references Home Sharing for sharing ipad/itunes content on a home pc/mac - so I would think it applies to content relayed to a tv or monitor too.

  • I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

    I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

    Hi Hardy Tasso,
    Are you seeing this problem since first launch of PSE13 after installation or recently?
    Please try:
    Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
    Thanks,
    Anwesha

  • AirPlay does not work with iPhone 4 s or iPad.Remote doesn´t work as well

    AirPlay does not work with iPhone 4 s or iPad.Remote doesn´t work as well.
    WLAN is working, I can use Youtube on my AppleTV, but I can´t connect to my computer or use airplay on my iPhone or iPad.

    Something is not configured correctly that is creating issues with your AppleTV.  You can disconnect it from the TV and power, and then plug it into your computer with a micro-USB cable.  After launching iTunes on your computer, you will be able to restore it to default settings and upgrade the software.

  • Synchro does not work between Ipad, Iphone and Mac

    Good evening,
    I have an IMAC, iPhone 5s and an Ipad all with the last IOS version and synchro does not work at all.
    My iCloud address is not with iCloud but with hotmail.
    I dod not get any suitable answer from the retailers in Budapest.
    Does anybody have an idea? Thank you.
    Greg

    good evening!
    i switch on in iCloud the calendars on both Iphone and Ipad/mac of course but nothing happened.
    Can it be because my iCloud address is with hotmail?

  • Select All in a table does not work for Drag and Drop

    Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
    I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
    I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
    I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
    Does anyone know how to get Select All to work for a Drag Source?
    Thanks.
    -Ed

    Frank-
    OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
    SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
    Thanks again for the reply.
    -Ed

  • Airplay does not work with slideshows and music - get the slides but no music with iPad Air2 and ios 8.1.22

    iPad Air 2 with celluar with ios8.1.2 will not airplay with apple tv slideshows with music. I see the slides on the TV but do not hear the music. This works on the iphone 5s with iOS 8.1.2 and with my other iPad which is on iOS7.
    This problem was reported on Nov 21, 2014 and other people had reported it prior to me.
    When will this be fixed by Apple - it worked in the past and does not work now.
    Should i return my iPad Air 2 and get my money back?

    Problem seems to be resolved. Should have thought of it myself ;-) thanks so far!

  • Despite my spell check being set, it does not work in Hotmail and some other websites.

    I have the setting for spell check set up but it does not work on some sites like hotmail. I go to the spell check button in hotmail and it tells me that my browser will automatically check as I type but it doesn't. I've searched to override this or to get the spelling checked independently but without any luck, Any suggestions?

    Not all locales come with a dictionary installed for licensing reasons.
    If you do not have the en-US locale then check that you have a dictionary installed (Tools > Add-ons > Extensions).
    You can see which dictionary is selected if you right-click in a text area and open the ''Languages'' submenu.
    Also make sure that [[X]"Check Spelling" in the right-click context menu has a tick.
    You can also try to toggle the "Check Spelling" item off and on again.
    See http://kb.mozillazine.org/Spell_checking and [[Using the spell checker]]
    See also http://kb.mozillazine.org/Dictionaries
    You can look here for more dictionaries:
    https://addons.mozilla.org/firefox/browse/type:3
    https://addons.mozilla.org/en-US/firefox/addon/3366 (English (British))

  • Shared variable does not work between two computers

    I am using LabVIEW 8 on Windows XP computers.
    1. On one computer I have created two projects, writeProject and readProject.
    2.  In the writeProject I have a shared variable, writeData, which is "network-published" double. In this project I have a writeData.vi which in while loop assigns a random value to the writeData variable.
    3. In the readProject I have a shared variable, readData, which is "network-published" double and is bound to the writeData variable.  This is on the same computer as the writeProject.
    4. I run both the writeData.vi and the readData.vi and all works fine.
    5. Now, I create a readProject on a diferent computer.  Perform all the steps as described above and also in tools/shared variable/register computer, I have entered the IP address of the target computer on which the writeData shared variable exists.
    6. Binding the readData variable fails in the following way.  When I browse for the source, in the "Select Source Item" dialog, I see <IP> <Populating Node...>, where <IP> is the IP address of the source computer (on which exists the writeData shared variable).  A very long time later it is still "Populating Node...".  Neddless to say, this readData.vi does not work!
    What am I doing wrong?  Or, perhapse what else do I need to do to make it work?

    Hi,
    I would suggest checking out the two KnowledgeBases I have linked below for common issues with Network Shared Variables. Let me know the results. Thanks!
    Troubleshooting Network-Published Shared Variables
    Why Are My Network Shared Variables Taking Very Long to Initialize?
    Stephanie

Maybe you are looking for