Calender field not filled in Informer Tab

Hi All,
I have installed and configured Compliance calibrator 5.2.
All the rules are properly uploaded, User Risk analysis is also working fine , but in the informer tab the management view in not configured properly.
Calender filed is not filled.
Can anyone please tell me , what could be the reason behind it.
Regards,
Anubha

I have selected all options (checked all) in the batch risk analysis section in the Full sync mode and also the same for user/role/profile synchronisation. 
This has completed successfully. Yet the calendar tab is not filled.
Please help.
Thanks.

Similar Messages

  • How to make valuation type field not changeable  in delivery tab of PO

    Hai friends,
                    I am new to badis..please guide me to solve the issue...
    how to make valuation type field not changeable  in delivery tab of PO...
    The field shd be in display mode only ...actually...there  a badi has been used before
    to get valuation type from a ztable depending on material and plant...
    Now ..my requirement is that the user shd not change the default value brought from the ztable...

    Hi SRINIVAS,
    You can achieve this from BADI only if BADI is allows you to do this. You cannot achieve everything from a BADI. Check if there is any expoting field in the methods that can be ticked for making the field in display mode. If not then you cannot achieve this from BADI.
    The field you want to default to display is a standard or zfield. If z, then you can changethe attribute of the screen field to Output only.
    Regards,
    Manish

  • Manual bank statement error: "Bank reference" field not filled

    Hi,
    I'm getting an error (see below) while entering details in the manual bank statement.  I've checked the variant already, and the manual bank statement variant with "Bank Reference" field is already deactivated. How come FF67 still validates on this field?
    Did I miss something?
    Hope for your speedy reply. Thanks!
    "Bank reference" field not filled
    Message no. FV094
    Diagnosis
    An interpretation algorithm is given in transaction 003-.  This algorithm interprets the value entered in the field "Bank reference" and automatically determines the items to be cleared.
    The field "Bank reference" is not filled.
    System Response
    No interpretation will be carried out.
    Procedure
    Recheck your entries.

    Hi,
    The Bank Statement Transaction you are using has an Int. Algorithm configured, which requires the Bank reference field.
    In IMG in the transaction where you create and assign business transactions to posting rules, there is also a filed for Int Algorithm. The system uses the Int Alg. to determine the fields on which to match and clear documents. The transaction you are using may have an int algo. configured which uses the reference field for clearing.
    Even if you remove the reference field from the Manual Bank Statement Variant, the system is still going to look for it because that is one fields defined for clearing in the int alg.
    You can change the config settings for the transaction, but either removing the Int alg. or using a different one. The description of the Int Alg. on the drop down list, will give you an idea of what fields will be used for clearing.
    IMG path...FA->Bank accounting> business transactions-> payment transactions>manual bank statement-> Create and Assign business transactions.
    Hope this helps.
    Thanks,
    Uma

  • Data Origin Types not filled in the tab "Control Data" of BP interface

    Hello experts,
    I have loaded the clients from ECC6.0 to CRM 4.0.
    Before I have loaded the clients I have maintained the data origin type for the BP in spro -> cross application components -> SAP Business Partner -> Business partner -> Basic settings -> Data Origin -> Maintain Data Origin Type.
    After I have done the load initial of clients, the field  "Data Origin" is empty in  the tab "Control Data" in BP interface. If I do F4 in the field appear the configuration that I did in spro appear.
    For this field will appear filled I'll need to do more configurations in spro?
    Best regards,
    Mary

    Hi Mary,
    The middleware does not fill this field in BP master data. You can maintain data origin type in SPRO, however the mBdoc does not use this customizing in order to fill this field.
    Please try to use the BADI CRM_DATAEXCHG_BADI in order to fill this field during master data download.
    It hope it helps.
    Regards,
    Gabriel Santana

  • Logical System is not appearing in Informer tab to check SOD's

    Hi GRC Experts,
    I have an issue with logical system to run risk analysis.
    I created logical system by following the Config guide, added physical system and generated rules (RAR Configuration>>Logical Systems>>Generate Rule) for that logical system.
    I haven't generated rules for the physical system (RAR Config>>Rule Upload>>Generate Rules) since I dont want more rules to be displayed in the reports.
    However I do not see logical system as an option in Risk Analysis (informer Tab) and Config>>Schedule background job for BAtch Risk Analysis>> under system as well.
    It would be great if any one advice me on this.
    Regards,

    Thanks Chinmaya,
    Yes you are right, I confirmed with a friend (my ex-GRC colleague) of mine as well.
    can't execute sod checks on a logical system - logical systems are only intended to eliminate the need to add the same rule set over and over for the same types of systems
    Regards,
    Ramesh K

  • Data fields not filled in DSO Activation

    Dear All,
    I have written an End routine to extract data into a DSO to fill some data fields. The End routine will perform a lookup on another DSO and modifies the records of the result_package. The data fields are characteristics and hence in the transformation, they are set to No Transformation.
    When I extracted the data into DSO, the new table has all the data fields correctly filled. But, after activating the request, all the data fileds data are erased. However, the keyfields data is still available in the Active table.
    Can you please help me on this.
    Thanks,
    Srinivas

    Hi Srinivas
    I have faced the same issue.Data was coming till new table,but after activation fields were getting
    blank.
    There is no necessity for doing a dummy mapping. In the transformation screen you will be having an ikon near to the delete
    routine symbol with an arrow symbol
    similar to select all and unselect all, just clikc on it and then mention the setting as Update all the target fields need to be populated.
    This will solve the issue, if it is not solved, then you can make a direct mapping to any of the field in the source, it need not be the
    exact field in the target.
    Thanks,
    Saveen Kumar

  • 0HR_PY_1 Datasource: Fields not filled

    Hello to everyone!
    I'm afraid that I need some help from you. We are extracting HR data via 0HR_PY_1 Datasource and I have noticed that some fields are not filled by the extraction program. I've read BW Online Help about this datasource  and I have realized that the extraction program doesn´t fill these fields.
    Do you know how can I do to make these fields to be filled?
    The fields are:
    - KOKRS_CO
    Controlling area 
    Not filled
    - CO_AREA_WP
    Controlling area of master cost center
    Not filled
    -LSTAR_CO
    Debited activity type
    Not filled
    VORNR_CO
    Debited transaction
    Not filled
    GSBER_CO
    Debited business area
    Not filled
    KOSTL_CO
    Debited cost center
    Not filled
    BUKRS_CO
    Debited company code
    Not filled
    NPLNR_CO
    Debited network
    Not filled
    AUFNR_CO
    Debited order
    Not filled
    PS_POSID_CO
    Debited WBS element
    Not filled
    Thanks in advance!
    Best regards,
    Mª Victoria Durá

    Thank you very much for your help but, I'm afraid that the procedure that you explained is for enhancing the datasource but my problem is that the fields already exist but they are not filled by extraction programmes. I don't understand why does SAP make this and I was wondering if there are any way to make these fields to be filled using the standard procedure. I mean, if these fields are not filled (and SAP tells you so in BW Online Help), why these fields are included in the extract structure and in the datasource?. I tend to think that there are any procedure to follow in order to fill these fields. What do you think about it?. In adition, the not-filled-fields are CO objects so it doesn´t appear to me to be very easy the filling of them.
    I don't know if anybody has been in the same situation or if is there any documentation about it that can help. Thank you for your help!
    Mariví

  • Created by field not filled in ITS

    Hi all.
    SRM 4.0.
    Transaction BBP_MON_SC - the field Created By is no longer being filled out in my ITS screens; web screens. However, if I process this from SAP Gui, the field is filled. Have you seen this type of behaviour before?

    Hi Dennis,
    Try notes:
    1148093 - Shopping cart monitor: Search done based on User ID
    961422 BBP_MON_SC: No search help for 'Created By'
    764135 - Shopping cart monitor: Selection according to 'Created by'
    The last note should give you some hint / direction.
    Regards,
    Prashant

  • Work email field not filling in for mail enabled security groups in sharepoint

    I've recently been trying to setup alerts to send to mail enabled security groups on our sharepoint site.
    I've created universal mail enabled security groups for this purpose, and populated them with users, and then set those in the alert field, but no one is getting alerts.
    After a lot of investigation, I've found that this is likely because the security groups listed under sharepoint in the people and groups section don't have work email fields filled in. Theres a couple of groups that work which do have this field filled
    in, but everything created recently is missing this. I can't seem to set this field up to be editable instead of importing from AD either. I've confirmed the AD import is working fine, all user details and work email fields are filled out correctly, it is
    only the security groups that are having problems.
    Does anyone have any experience with this?

    As per your description I assume that individual user gets email alert, right ?
    If no then go to central administration > operation > timer job definitions > “web application” view > select your web application in the menu bar to check if Immediate alerts working fine
    If not, please run the following operations:
    stsadm -o setproperty -propertyname alerts-enabled -propertyvalue false -url http://...
     stsadm -o setproperty -propertyname alerts-enabled -propertyvalue true -url http://...
     stsadm -o setproperty -propertyname job-immediate-alerts -propertyvalue "every 5 minutes"  -url http://...
    And then try again.
     At last, if the issue is still there, please check your email server settings in terms of the following articles:
    http://www.sharepoint-tips.com/2007/10/email-alerts-not-getting-sent-while.html
    http://social.technet.microsoft.com/Forums/en-US/sharepointworkflow/thread/36c3b5b5-af03-4f8a-b202-b62db330c21c/
     And if individual user gets an alert then you can create cutomized alert for Sec group
     Please refer
     http://sptoolbox.codeplex.com/releases/view/8255
     hope this will help you
    Regards, Pratik Vyas | SharePoint Consultant | http://sharepointpratik.blogspot.com/

  • Customer field not fill in FAGLFLEXT

    I'd actived a customer field (PS_PSP_PNR) in the main ledger and I'd included this field in totals table (FAGLFLEXT). I tested this customization and it worked fine.
    The problem happens when G/L account is a statistical cost element (type 90). In this situation, I fill the field (PS_PSP_PPNR) and save the document, when I'm going to check its value in the position of the document (BSEG) is filled ,but  when I check the balance of this G/L account in the table FAGLFLEXT it's empty.
    I appreciate your help in this problem.

    Dear Anto,
    In the table Enhancement, you select Additional fields and choose ZZPS_PSP_PNR.
    Field name (total)    Data element   Check Table   Short Text                                                                         Field Name
    ZZPS_PSP_PNR     PS_PSP_PNR     PRPS           Work Breakdown Structure Element (WBS Element)     PS_PSP_PNR

  • Sales Order field not filled in FAGLL03

    Hi,
    We have a reqmnt where we want to have sales order field in Tcode FAGLL03. Infact field is already there but not getting populated.
    Our GL code is Cost of Goods sold & we wanted to see Sales order field in it.
    Plz suggest
    regards
    MC

    Dear M C,
    Did you ever get an answer to this question?  I don't see anything in the thread, but maybe you found it out yourself.  I have the same problem.  I want to see the sales order and item in FAGLL03 (similar to KE5Z).  Let me know if you have a solution for this.
    Sincerely,
    MIchael

  • Language field not filled

    Hi,
    I am getting error while executing DTP
    EMPNAME : Data record 1 ('BARAK WATSON') : Language key is initial
    details : The data record 2. with the key '3.' for characteristic 1. has a blank
    language key.
    I have seen in error stack that language feld  is empty ( EN is supposed to be extracted)
    how to correct this ??
    Regards,
    Vivek

    HI,
    The reason for the error message is the blank entry for the filed. Since the there is a blank value it wont be able to genrate SID for the blank value hence the error in case you are loading to the cube. or its one of a key filed on the ODS.
    for the time beling you can chnage the data in the PSA and assigne the value to the fileld nad then load the data.
    Hope this helps.
    regards,
    Mahesh.

  • Time/Date Field Not Returned in PDF

    I have created a very simple form in LiveCycle Designer 8.0. The form enables the user to input data into columns labeled "name," "change type," and "change date." I used the date/time object for the "change date" row fields.
    When my testers (using Acrobat 7.0) email the saved form back to me, all of the fields are populated with the information they entered, except the "change date" column fields. I asked if they used the flyout calendar or typed in the date manually, and all used the calendar.
    Is this a compatibility issue, or is there something I need to do to bind the chose value to the field when the form is saved?

    The issue with the time portion of date field not displaying in Data tab of a Table window has been posted before - see date format while browsing data
    I still get the problem in v1215 connecting to either 9i or 10g databases. Note that this problem does not happen in the SQL Worksheet results area, so simply querying the table data with a select doesn't test this.
    As for Ctrl-C, Ctrl-V changing the date format to MM/DD/YYYY HH24:MI:SS when copying data out of the SQL Worksheet Results - I also still get this in v1215.

  • Z partner function not available in details tab of PCUI

    Hi gurus,
    I have created a Z partner function in GUI and included in the determination procedure as well as in the z transaction type for opportunity. Included in the user interface setings as well.
    In the details tab(PCUI) there are only 3 standard partner functions and the z partner functions are not appearing.
    Can some one explain the procedure for getting those z partner functions in PCUI details tab.
    Full points will be awarded if the solution solves the problem.

    Hello Praveen,
    If you add a Z partner function in your partner determination procedure, you will have it available in the partner tab but not on the information tab.
    There is no 'customizing' way to replace the existing partner funcition (account, contact, employee) by a Z partner function or to add it.
    To add it, you have to:
    - create an append to the screen structure with the fields you want to display
    - add coding in the read method of your MAC to display the value
    - add coding in the modify method of your MAC to modify the value.
    So, adding the fields in the structure is not enough. Moreover, you can add tehm in the tab linked to the screen structure but not anywhere on the application.
    Regards,
    Fred
    Message was edited by:
            Frederic Schoenaers

  • Balancing field "Profit Center" in line item 001 not filled

    When i am doing Posting with clearing(FB05) i am getting the below error message "Balancing field "Profit Center" in line item 001 not filled"
    Background: When we are doing the MIRO transaction we have used a diffrent profit center than it came from the Purchase Order where we have added extra cost and included the new line items under GL tab and posted the Invoice.
    Now i want to tranfer that to a diffrent Vendor and clear it. So i used FB05 transsaction. When i tired to do the transfer posting with clearing i am getting the error message "Balancing field "Profit Center" in line item 001 not filled" As we have under the document split Zero balances check box checked along with the Profit center Mandatory for field Profit Center. The system could not determine which profit center it has to use.
    Thanks in advance.

    Hi Kiran,
    Could you tell me how you are able to resolve this issue as we are having the same issue.
    Did you use the substitution rule?
    Please let us know.
    Thanks,
    Madu

Maybe you are looking for