Calender function on new BB10 not working

when I now go to add a new event it kicks me out

I've had the same problem.
I find I have to enter basic information (say a name or location), and then "save" my entry without making any time or date or notification changes. If I touch any of those, it boots me out of the program. After saving, then I have been able to re-open the entry, select to edit it, and input the rest of my information. Cumbersome and stupid, but manageable. I'm looking forward to a bug fix on this one!

Similar Messages

Repost Function using Variable is not working

Hello experts! I am on BW-BPS 3.5. I have set up a repost function using variables to change a characteristic value for Business Unit.
1. I created 2 variables as Bus.Unit From and Bus.Unit To in the Planning Area. I am not using the variables in my planning level.
2. I entered the variables in the parameter group New Values area for the From and To Values.
3. My goal is when the user executes the Repost Function for a Variable Prompt should appear and have the user select the From Business Unit and To Business Unit.
The Variables are set up as USERVALUE User-Defined Values, Restriction of Values required by user and I have tried with/without option of Input Allowed by User.
Can you tell me what I am doing wrong, I expected a variable prompt when executing the Repost Function but it does not work.
Thank you,
Teri

Ravi, Thank you for your reply however I contiue to have errors or the execution does not repost (change any value) as noted below.
1. I have 2 Variables in Planning area var1 (from) var2 (to) for the same charateristic which is Business Unit
2. Business Unit is in the level, on the selection tab to add the variable I can only add 1 variable, So I added var1 (from) to the level.
3. Parameter group for old and new values - I have Var1 (from), var2 (to)
4. Report Function - are you referring to Reporting variables in BPS? I have set this up as suggested in the "How to Use Reporting Variable in BW-BPS" document.
5. Enter plan data: I receive prompt for VAR1, mandatory. At this point there is no value in Var2.
6. Execute Repost function - I receive an error to "Restrict Var2"
7. If I set variable values and add a value for Var2 I receive an error "The generated data is not contained in the selection condition".
Next I removed VAR1 from my planning level and turned on the option 'Selection in package' for Business Unit. This seems to work well.
What do you recommend?
Thank you,
Teri

MY FIREFOX NEW TAB NOT WORKING NIETHER WITH + NOR WITH RIGHT CLICKING ON TAB OR DOUBLE CLICK ON TAB

MY FIREFOX NEW TAB NOT WORKING NIETHER WITH + NOR WITH RIGHT CLICKING ON TAB OR DOUBLE CLICKING ON TAB

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Macbook New Topcase Not Working

So after i figure out the problem i was having before in my previous discussion, i threw away the new topcase that was working completely fine for a few months and used an external mouse and keyboard til i could find another one.
Low and behold i bought a new black topcase,excited to finally have my frankenbook finally finished. Plugged it into the logic board, powered on fine..... and what do you know, the trackpad and keyboard do not work! The power button also refuses to work once it is on, only time it works is when i boot it up. I have looked into issues with new topcase's not working and that they need a new SMC firmware update.Tried downloading the update which my computer says i do not need as it is upto date
Macbook 2.4 ghz early 2008
4.1
1.3f1
Has anyone figured out how to fix this issue?
I have read that sometimes the connector on the logic board can become loose but i have checked it and all seems fine. Really annoying as there was no issues when i bought the logic board and new topcase and used it for month's, then the old issue before of my screen dying due to one of the pins under the topcase shorting something out. Then the topcase itself completely stopped working, now finally have a new topcase and the bloody thing will still not work!!
Only thing i am going to try out now is to buy a new cable that connects the topcase to the logic board and see if that helps... although the topcase was new anyway so the cable should work fine.
In hindsight i wish i just bought a used blackbook off ebay instead of building one myelf

Ok here is an update, formatted my Hard drive and tarted from scratch, installed Snow Leopard and after it had installed it said that it could not detect a keyboard at all. Could this be a Logic board issue then? I do not understand a the previous keyboard had worked fine but then screwed up, could this be a problem with the board and that the previous topcase was still functional?
Someone please help

'Create New Contact' not working in Phone app

I want to Create New Contact after a call from a new number (selecting the "circled i" button next to the "unknown" phone number in the Recents tab) but while I was entering data in the Contact app, I was interrupted, the iPhone went to sleep and my extensive Contact entry was lost because no data is saved until the Done button is manually selected which closes the record.
When I go back to the Phone app and select the "circled i" button next to the "unknown" phone number in the Recents tab, both the "Create New Contact" and the "Add to Existing Contact" buttons to take me to the Contact app do not work...i.e. nothing happens when I press them, even after putting the iPhone to sleep. After several tries, I let it sleep for 10 minutes and now these buttons linking to the Contact app from the Phone app again work as usual.
So we have two unacceptable defects in the iPhone basic Apple apps here:
1- interruptions while entering a new Contact app record causes the new record to be lost because it isn't automatically saved when the iPhone goes to sleep or an incoming call, etc, but only when the user manually selects the Done button in the Contact app record, which closes the record and one must then select the Edit button to resume data entry (repeat often to simply save as you enter in case there is an unexpected interruption...how dumb is that?. This is just poor iOS implementation that doesn't consider common usage situations that cause data loss, and it could be data that isn't easily retrieved. If Apple doesn't know how to implement auto save at frequent intervals, or upon certain events like sleep or incoming call, then they should at least put a Save button next to the Done button so we can manually save without the stupid Done and Edit button pushing, repeat, repeat, repeat.
2- A bug in the Phone app that causes the link buttons to the Contact app to stop functioning in at least the situation I describe above. This is unacceptable in a mature iOS basic usage app.

bump

Java downloading function FtpClien.get() do not work in Solaris 10

I wrote a java ftp code using java class provided by sun (sun.net.ftp.FtpClient). It worked nicely in Solaris8. After new update from Solaris8 to Solaris10, this function does not work anymore. Specifically this function "TelnetInputStream in = ftpClient.get(remotefilename)" does not work. It stucks there forever enven without giving an exception. Does anyone know this problem?
Thanks
P.S. I still can use the java function "ftpclient.put()".

http://forum.java.sun.com/thread.jspa?threadID=5276131
(never mind that this OpenSPARC forum is utterly wrong for your question)

New SuperDrive Not Working XP

I had my SuperDrive working fine with my XP (Boot Camp) partition. I replaced my SuperDrive due to the wire coating issue, and now my new SuperDrive stopped working on XP (yes, works fine on Leopard).
Any help? , please.

Do not delete your partition and waste 3 hours reinstalling drivers. I ran into this exact problem, but happened when I performed an install on a macbook and transfered that partition to a macbook air because we did not have the external superdrive. Soon after the initial install, a superdrive was acquired, but would not be working in XP. The superdrive was being recognized in the device manager, but said there was a configuration issue and to reinstall the drivers. To get around this:
1. Go into device manager
2. Select the External SuperDrive (should have a yellow exclamation mark)
3. Right click SuperDrive, select "Update Driver"
4. Select "No, not this time"
5. Select "Install from a list or specific location"
6. Select "Don't search. I will choose driver to install"
7. Select "USB Mass Storage Device" (do not select External Super Drive)
8. Click Finish
9. Now you will see your optical drive be recognized by XP, but it is not yet functional. Go back to device manager and select the super drive (probably labeled external optical drive, or perhaps usb mass storage device).
10. Repeat Steps 1-6.
11. When you get back to your choices, now you can select "Apple SuperDrive"
12. Enjoy your SuperDrive.
It now works. Hope this helps you save time instead of reinstalling XP and going through another strenuous activation process (especially if you already have VMWare or Parallels set up).

New URLRequest not working

I have copied code from one set of files that work and pasted them into another set of files and they do not work. The site I am developing is for an artist. You choose your medium and a field of pictures appear. When you choose an image it enlarges. From there you can go to previous, next or exit. Previous and exit works, but next does not. I have no idea why.
Working:
stop();
previous_mc.buttonMode = true;
previous_mc.addEventListener(MouseEvent.CLICK,pi)
function pi(e){
Loader(this.parent).load(new URLRequest("/fla/water/individual/graphiteWater17.swf"));
next_mc.buttonMode = true;
next_mc.addEventListener(MouseEvent.CLICK,ni);
function ni(e){
Loader(this.parent).load(new URLRequest("/fla/water/individual/graphiteWater2.swf"));
exit_mc.buttonMode = true;
exit_mc.addEventListener(MouseEvent.CLICK,exit);
function exit(e){
this.parent.parent.removeChild( this.parent );
Not Working:
stop();
previous_mc.buttonMode = true;
previous_mc.addEventListener(MouseEvent.CLICK,pi)
function pi(e){
Loader(this.parent).load(new URLRequest("/fla/leaves/leavesGraphite/individual/smallleaves7SOLD.swf"));
next_mc.buttonMode = true;
next_mc.addEventListener(MouseEvent.CLICK,ni);
function ni(e){
Loader(this.parent).load(new URLRequest("/fla/leaves/leavesGraphite/individual/smallleaves8SOLD.swf"));
exit_mc.buttonMode = true;
exit_mc.addEventListener(MouseEvent.CLICK,exit);
function exit(e){
this.parent.parent.removeChild( this.parent );
I would also like to get rid of the long string - "/fla/leaves/leavesGraphite/individual/smallleaves8SOLD.swf" - but it will not let me. The file calling this is in "/fla/leaves/leavesGraphite/ so I would like to put "/individual/smallleaves8SOLD.swf"
I hope someone can help.
Thanks,
Richard

Are you getting error messages regarding dupicated functions? For your last wondering regarding the lengthy path, when you are loading files with Flash in a web page, the html page defines the base of operations for target files. So regardless of where your main swf is, when it is in the html page, it needs to target files it is loading as if it is in the same folder as the html file.

'New-SPOSite' Not working.

Hello All,
I am trying to execute "New-SPOSite" command, but its not working. Its showing following error :
Get-SPOSite : The term 'Get-SPOSite' is not recognized as the name of a
cmdlet, function, script file, or operable program. Check the spelling of the
name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Get-SPOSite
+ ~~~~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (Get-SPOSite:String) [], Command
   NotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

Guys,
Sharepoint online management shell was not installed on my machine. After installation it worked for me.
http://www.microsoft.com/en-us/download/details.aspx?id=35588

HT201401 Front camera on IPone 4s functioning but back camera not working

I bought a used IPone 4S , every thing is working as usual exceot Back camera which is not working.It shows black view
I want to replace it with a new camera , but i am not sure if the fault is in the camera or in the connection.
Any advice will be appriciated.

To rule out a software problem, set it up as new device without using the backup afterwards:
How to back up your data and set up as a new device
If the camera is not functioning after that, get the phone serviced. Opening the phone to repair the phone yourself can't be recommended. Once you have opened the phone, Apple will not service it anymore and you'll have to search for 3rd party repair shops.

LocalConnection to run a function in another .swf not working....

I'm trying to establish a LocalConnection so that I can communicate between my navbar & the main page on my website. Here is the code I have so far for the sending and receiving AS3 files, please let me know if you see anything out of the ordinary. The idea is that when you click on one of the icons on the navbar my "book" slides down to the center of the screen on the correct page. I actually have 4 buttons but only included the code I'm using for two in order to make this post shorter. The same idea is used for all four buttons though.
Sending:
var sending_lc:LocalConnection;
sending_lc = new LocalConnection();
servicesBtn.buttonMode = true;
portfolioBtn.buttonMode = true;
function servicesBtnOver(event:MouseEvent):void{
servicesBtn.gotoAndPlay('over');
function servicesBtnOut(event:MouseEvent):void{
servicesBtn.gotoAndPlay('out');
function servicesBtnClick(event:MouseEvent):void{
sending_lc.send("my_lc_as3", "gotoServicesPage");
servicesBtn.addEventListener(MouseEvent.ROLL_OVER, servicesBtnOver);
servicesBtn.addEventListener(MouseEvent.ROLL_OUT, servicesBtnOut);
servicesBtn.addEventListener(MouseEvent.CLICK, servicesBtnClick);
function portfolioBtnOver(event:MouseEvent):void{
portfolioBtn.gotoAndPlay('over');
function portfolioBtnOut(event:MouseEvent):void{
portfolioBtn.gotoAndPlay('out');
function portfolioBtnClick(event:MouseEvent):void{
sending_lc.send("my_lc_as3", "gotoPortfolioPage");
portfolioBtn.addEventListener(MouseEvent.ROLL_OVER, portfolioBtnOver);
portfolioBtn.addEventListener(MouseEvent.ROLL_OUT, portfolioBtnOut);
portfolioBtn.addEventListener(MouseEvent.CLICK, portfolioBtnClick);
Receiving:
import com.greensock.*;
import com.greensock.easing.*;
var receiving_lc:LocalConnection;
receiving_lc = new LocalConnection();
receiving_lc.connect("my_lc_as3");
receiving_lc.client = this;
var bookPosition:String = "up";
function gotoServicesPage(event:MouseEvent):void {
     book.gotoAndStop('webDesignPage');
if (bookPosition == "up");
        TweenLite.to(book, 2, {y:830});
          var bookPosition == "down";
function gotoPortfolioPage(event:MouseEvent):void{
     book.gotoAndStop('porftolioPage');
if (bookPosition == "up");
        TweenLite.to(book, 2, {y:830});
         var bookPosition == "down";
The reason I'm keeping track of whether the book is in the "up" or "down" is so that if it's in the down position already it doesn't re-tween back onto the screen. I am new to declaring and using variables; TweenLite; and LocalConnection so there is probably some simple problem with my AS3 code (although no errors are coming up in Flash). Any help would be much appreciated.

Alright I'm going to fix one problem at a time, starting with the LocalConnection. I've checked several websites for tutorials and examples but cannot seem to get it working properly. I'm just trying to run a simple function over it and can't get it working. Once I can get it working, I'll modify the rest of the code to do what I need. Right now I'm just trying to use it to run a function (slideServicesIn) in a seperate swf. file. I've checked and rechecked the code and just can't figure out why it's not working.
Here's the sending code:
import flash.net.LocalConnection;
import flash.events.MouseEvent;
var lc:LocalConnection = new LocalConnection();
function servicesBtnClick(event:MouseEvent):void{
lc.send("my_lc_as3","slideServicesIn");
servicesBtn.addEventListener(MouseEvent.CLICK, servicesBtnClick);
Looks pretty simple.... And here's the receiving code:
import flash.net.LocalConnection;
var lc:LocalConnection = new LocalConnection();
lc.connect("my_lc_as3");
/*If you're not familiar with TweenLite or TweenMax, I can revise the code. I can't get it to work even just to go to a certain frame label. This seems pretty basic if you are even a little familiar with TweenLite/Tweenmax*/
import com.greensock.*;
import com.greensock.easing.*;
import com.greensock.plugins.*;
var bookPosition:String = "up";
var currentPage:String;
function slideServicesIn ():void{
         if (bookPosition = "up"){
         //Goes to a certain frame label in the book movie clip
         book.gotoAndStop("webDesignPage");
         //Slides the book down 825px from the top of the screen using TweenLite
         TweenLite.to(book, 3, { y:825 } );
         bookPosition = "down";
         currentPage = "book.servicesPage";
        else () {
         //Fades out the current page using TweenLite
         TweenLite.to(currentPage, 1, { alpha:0, ease:Quad.easeIn } );
         //Fades in the Web Design Page using Tweenlite
         TweenLite.to(book.webDesignPage, 1, { alpha:1, ease:Quad.easeIn, delay: .2 } );

Why does addChild(new Shape()) not work?

I would like to know why the following code does not work:
<mx:Application>
private function doShape():void {
var aShape:Shape = new Shape();
this.addChild(aShape);
<mx:Button click="doShape()" />
</mx:Application>
according to the docs, addChild() takes a DisplayObject as a
parameter. Shape is a DisplayObject. However, I get an error
(#1034) that Shape can't be converted to mx.core.IUIComponent
I don't understand what the problem is...

inlineblue -
Thanks for the advice...
I was actually converting code over from Flex 1.5 where there
is a pretty big difference between calling a beginFill()/lineTo()
method on a UIComponent and attaching a whole new
Container/MovieClip. In Flex 1.5 the application was so slow I
trimmed out every container/MovieClip I could.
If it's not such an issue in Flex 2.0 then I will go with the
easier to read addChild(new Box()) method.
Flex harUI - I assume that you mean if I create a new
UIComponent and then add a Shape for color, I am essentially doing
the same thing that normal containers like Box (a UIComponent) do
with their chrome instance (a Shape?).

Search Function on Appstore suddenly not working on IOS6

My New iPad will get a blank white screen everytime I search for something in the app store.
I tried "Reset All Setting", "Reset Network Settings", "Reset Keyboard Dictionary", "Reset Home Screen Layout", "Reset Location & Privacy." Nothing works. I tried the Restrictions method, Restart the iPad by holding down the Hold button until the Apple icon appears, and again nothing works.
It was fine when I first upgraded to IOS 6 but all of a sudden after a few days with IOS 6, the search function on the appstore just did not work and give me a blank white screen.
My daughter's New iPad still works fine with the appstore search function. Only my New iPad is not working. But for some weird reason, the search still works on iTunes just the Appstore Search that gives me a blank white screen. I wonder how long this will last, it's lame because I have to search the appstore using my PC.

solved today for me without do something on my iPhone.. issue on apple side!!

SUBMIT FUNCTION ON COMPRESSOR IS NOT WORKING

Hi Everybody!
I was overseas for a while and when I came back to work, my workstation was updated I guess.
I'm using the FINAL CUT STUDIO 3, I did not any updates yet.
My issue is when I'm trying to send a sequence, from the timiline in final cut (SEND TO/COMPRESSOR) everything seems to be normal. Once I do all the settings and destinations on COMPRESSOR, and I'm ready to start the render, I'm able to see the SUBMIT button, but it seems to be inactive...
Probably u have already figured out the way to fix this issue...
please help guys, this is delaying my overall process so much!
Thanks!

Hi everybody!
Compressor don't works! I can't use the submit function because it doesn't work. Help me!
I removed compressor and Qmaster and re-installed them: in this way the submit function works and I can save the job on "this computer", but when I download the compressor's upgrade the submit function stops to work.
I'm sorry, I'm italian and my english is very bad!

Adobe Support: Please Read, New Flash Not Working

Adobe, please read this. My Flash player is not working and I would be happy to help you troubleshoot. I have a completely fresh install of Windows XP on a Dell Laptop and the new Flash Player is not working. I am in the tech field so I will understand most of your requests...Here is my situation.
The problem began just after Christmas when I returned home from holidays and tried to watch videos, which I do all the time for both work and pleasure. Videos would not play in a watchable manner...I could hear audio but video was completely choppy and unwatchable. I researched and researched and implemented many suggestions but to no avail. Thus, I COMPLETELY rebuilt my system from scratch. (I needed to do this anyway since it had been 2 years.)
After the rebuild, on a completely fresh install of XP on a Dell D410 laptop (that was playing all videos just fine a week ago), I installed Firefox, went to youtube which prompted me to install Flash, and then had the exact same problem that I had before the complete reinstall of everything. There are scarecely any variables here other than the Dell Laptop, a standard Windows XP SP2 build, Firefox and Flash.
I think I have narrowed this problem down to two things. One, the new version of Flash.
It's choppy on youtube AND it's choppy on megavideo, the other place where I watch a lot videos.
I then tried on IE, which also prompted for the new version of flash, and also had the same problem. Chrome--same result.
However, this problem cannot be a universal problem with Flash otherwise nobody would be able to watch any videos onlline.
This leads me to the second problem, which a complete hypothesis but it seems to be the only thing left: my Dell laptop.
I have noticed that some of the other folks with reported problems, who mention their system type, are also using Dell laptops. Mine is an older d410, but as I said, it was running every video just fine up until a week or so ago when all of the sites forced me to install the new version of Flash. Most Dell laptops use a common video driver set and this is what is leading me to this conclusion.
So, could this be a problem with the new Flash and Dell laptops (or systems that use a common video driver)? As a reference point, my "display adapter" says "Mobile Intel (R) 915GM/GMS,910GML Express Chipset Family".
Viewing videos is part of my job (and entertainment) and I cannot do anything right now.
Someone out there...please hlep. Adobe, where are you? We are here providing you with all of the information that you need....

Thank you for this response. Apparently, Adobe does not provide support since this is a free product.
However, Adobe, I need your help.
In summary, I have a fresh build of Windows XP, SP2 on a Dell D410 and the Flash player does not work. This affects at least 50% of the sites I visit. Right now, I simply have the Flash Player uninstalled and can surf the net rapidly. Once I install it, I am back to a crawl and still cannot affectively watch any videos (they all have extreme video choppiness but the audio is fine).
I need your help, Adobe. Everything was working fine until 2 weeks ago. It is unfair of you to distribute a product like this, force everyone to use it, and have it not work for some of us.
So far, this free product has cost me hundreds of dollars as a good part of my job is reviewing videos.
Many have suggested that I buy a new computer to fix the problem.
Is this really necessary?
Adobe, I am a man in need...please help me...
(PS: I am not the only one. I have also entered my problem here http://www.google.pl/support/forum/p/youtube/thread?tid=6039f438d085295f&hl=en&fid=6039f43 8d085295f00047c7e3182b625 to no avail.
And I have done more research than you can imagine. Here are a number of sites where people are reporting problems with Flash:
Streaming videos are choppy all the sudden.... - CPUs - CPU-Components How do I resolve choppy/jerky video in Firefox? - YouTube Help Videos are choppy, Audio distorted. - YouTube Help DIYnot.com > Youtube stopped working "JavaScript turned off" youtube is not working - YouTube Help Flash sound stopped working. | Ask MetaFilter Anyone have problems with Youtube freezing? - Software - Non-Gaming - Discussion Forum | Eurogamer YouTube videos freeze after a second - Google Chrome Help My Comments on Video Problem Flash Player 10 memory leak!! Graphics - Customized computer manufacturer graphics driver is detected AfterDawn.com: Guides: How to play FLV files Adobe Forums: Adobe Support: Please Read, New Flash... Adobe Forums: Flash Stopped working
Obviously, I have still not found an answer to my problem. Please help me.
Thx,
Richard)

Calender function on new BB10 not working

Similar Messages

Maybe you are looking for