Calender overriding default alert settings in iOS

Here's the problem: when I do an All Day Event in Calendar, something overrides my default Alert settings and sets and Alert for 9:00am the day before the All Day Event. I only want Alerts set on Events I choose, so I'm assuming that's why I have my defaults Everywhere (Mac, iPad, iPhone iPod Touch) set to None for Birthdays, Events, and All Day Events. Once the Alert sounds, if I go in to Edit the Event and delete the Alert, it does not recur if edited properly. (I do use multi-day All Day Events).
This is most annoying, BTW. Because I trust these devices to be accurate and to do what I expect within their rather few limitations compared to the rest of the techno-device universe.
What am I not doing? What should be undone?
Thanks for any help.

You can send Apple Feedback here: http://www.apple.com/feedback/

Similar Messages

Any way to override default printer settings into a PDF

Hi -- I work for a large organization that has lots of computers and printers and prints a lot of forms and documents. We are moving towards more digitization of documents and records including printing forms as needed as opposed to having large sets of forms onhand. This should save us a lot of time and money once complete as these forms often change and the old process would be to then trash much of these documents and re-print for just one change. The majority of our printers do have letter & legal trays as well as duplex support, however due to the vast number of users the default printer settings tied to each user and/or computer may be slightly different. While standardizing all the printer settings across all users/computers would be one solution, we don't anticipate doing this as depending on the job peformed the different settings may be more preferable / advantageous for that user.
As such the other solution I can think of is to hardcode the specific printer settings needed to correctly print a large document into that PDF file which may differ from that computer's print settings. For example, the default computer print settings may be to print on just 1 side but duplex would be encoded / scripted directly into the PDF so IRREGARDLESS of the computer/printer settings this document would always print duplexed.
Is there anyway to do this? I would need to do more than just duplexing -- ie some form sets would need to be both duplexed and 'fit to printable area' whereas some would need to be only on one page and 'shrunk to printable area', etc, etc. Our current practice is to insert a 1 page coversheet at the front of each document with the printer settings that need to be used for that form set, however this has been difficult for some users to do and has caused unnecessary time with our IT troubleshooting form printing.
-Brandon

Hi Brandon,
You can use the Print Presets in Acrobat for that purpose. Please follow the steps below:
1. Open the PDF in Acrobat
2. Open Document Properties dialog (using Ctrl + D)
3. Select the "Advanced" tab
4. In the "Print dialog Presets" section, you can choose DuplexMode as well as Page Scaling for this document.
Please let us know if this works for you
Thanks,
-Shilpi

IOS - Create Event from Messages in Calendar doesn't observe default Alert settings

I have discovered a bug in the iOS Calendar app. If one gets a text message with a time and uses the underlined link (in Messages) to "Create Event," the newly created calendar item (Event) does not set the alert as defined in Calendar settings.
For example, my alerts are set (in Settings) to 1 hour, but when using "Create Event" from Messages, the alert is pre-set to none. When creating a new event strictly in Calendar however, the 1 hour alert is set properly for the new event.
Is this just me, or can others confirm this?
And does anyone have suggestion for a fix?

You can send Apple Feedback here: http://www.apple.com/feedback/

How can I customize default alerts in Calendar?

I would like Calendar to put a default email alert on every new event. I can do it individually with each event but I can't make it a default.
What I want is for Calendar to email me an alert the day after an event.
I have managed to be able to get Calendar into a two-week view using the terminal, and also adjust my default event legnth using Terminal. But I have been able to find nothing that will allow for me to customize the default alert settings. Any help would be great.
I use Calendar for work, so this may be an odd request but would improve my life drastically!

Hi,
For customising Required Message u can make use of "requiredMessageDetail" in af:inpuDate.
For Pattern validation message u can go as per Kavitha's advise or
Make use of "messageDetailConvertBoth", "messageDetailConvertDate" or "messageDetailConvertTime" as per ur "type" attribute u specified.
Regards,
Suganth.G

Default Alert Style notification settings for Apple iOS apps (Banners or Alerts)

As I changed the Alert Style notification settings during the time I wonder what the default notifications settings are for:
- Phone
- Messages
- Reminders
- Calendar
- Photos
Probably it is all Bannersis with non-Apple apps
Thx for your feedback

You can send Apple Feedback here: http://www.apple.com/feedback/

Iphone 4 icalender alert settings problems since upgrading to IOS 7.1.1

I have an iphone 4 and since updating to ios 7.1.1 my icalender alert settings automatically change from what i selected.ie I set my event alert as 1 day and second alert as 2 hours but it automatically gets reversed most of the time.

I'm having the same issue on my iphone 4S since upgrading to IOS 7.1.
At first I thought is was a carrier problem and I even changed my Sim card for a new one, but it didn't solve the problem.
Then I put my sim card in another phone and it worked just fine, so I tried:
Reset network settings,
Reset all settings,
Restore my phone with the previous backup,
Restore my phone as new
And any of these worked for me. After almost losing hope I turned off my 3g connection and the signal came back, even when I was using wi-fi. Also the battery life is a million times better.
So I called apple support and they told me that it seams to be a hardware malfunction and because my guarantee is expired I have to pay to get it changed for a new one.
I think they don't know what they are doing and don't know how to fix it so it's easier to blame the hardware and charge us for they mistakes.
I'm still waiting for some update to solve my problem because before the update 7.1 I had a perfect functional phone.

DtReport structure and Alerts Settings from sender AS2 Reports adapter

Hi,
I have imported DtReport for MDN's from SeeBurger AS2 adapter documentation as external definition into PI. However, in the mapping, when I select DtReport as source, I could see only the following structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:DtReport xmlns:ns0="http://uri.seeburger.com/dt/master/schema">
   <ns0:clientId/>
   <ns0:correlationId/>
   <ns0:category/>
   <ns0:state/>
   <ns0:finalReport/>
   <ns0:freeText/>
   <ns0:specificData/>
   <ns0:reportAttachment/>
   <ns0:archiving/>
</ns0:DtReport>
But when I import the test MDN message that we received it has key and value elements underneath the tag 'specificData'. How do I get these two elements from external definitation?? Anything that I should in External References??
How does the following 'Alerts Settings' work from sender AS2 Reports adapter:
Enable alerts
Negative transmission report alert
Negative delivery repot alert
Negative receipt report alert
Thanks,
Riya

Here is the XSD:
?xml version="1.0" encoding="ISO-8859-1"?
xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:att="http://uri.seeburger.com/bisas/message/schema" xmlns:tns="http://uri.seeburger.com/dt/master/schema" xmlns="http://uri.seeburger.com/dt/master/schema" targetNamespace="http://uri.seeburger.com/dt/master/schema" elementFormDefault="qualified" attributeFormDefault="unqualified"
     xsd:import namespace="http://uri.seeburger.com/bisas/message/schema" schemaLocation="attachments.xsd" /
     xsd:include schemaLocation="dtglobaltypes.xsd" /
     xsd:include schemaLocation="dtarchiving.xsd" /
     xsd:element name="DtReport" type="tns:DtReportType" /
     xsd:complexType name="DtReportType"
          xsd:sequence
               xsd:element name="clientId" default="000" type="tns:stringLength3Type"
                    xsd:annotation
                         xsd:documentation
                         Logical System ID
                         /xsd:documentation
                    /xsd:annotation
               /xsd:element
               xsd:element name="correlationId" type="tns:uuidType" /
               xsd:element name="category" type="tns:reportCategoryType" /
               xsd:element name="state" type="tns:reportStateType" /
               xsd:element name="finalReport" type="xsd:boolean"
                    xsd:annotation
                         xsd:documentation
                         True if this report is the last one for the given correlationId
                    E.g. if this report is a deliveryReport but there is also a remaining ReadReceipt, then finalReport would have the value 'false'
                         /xsd:documentation
                    /xsd:annotation
               /xsd:element
               xsd:element name="freeText" type="xsd:string" minOccurs="0" /
               xsd:element name="specificData" type="tns:keyValueType" minOccurs="0" maxOccurs="unbounded"
                    xsd:annotation
                         xsd:documentation
                         Optional report data specific to the components and protocols
                         /xsd:documentation
                    /xsd:annotation
               /xsd:element
               xsd:element name="reportAttachment" type="att:AttachmentRefType" minOccurs="0"
                    xsd:annotation
                         xsd:documentation
                         Optionally holds the report as attachment in its raw format.
                         /xsd:documentation
                    /xsd:annotation
               /xsd:element
               xsd:element name="archiving" type="tns:archivingType" minOccurs="0" maxOccurs="unbounded" /
          /xsd:sequence
     /xsd:complexType
     xsd:complexType name="responseReportHandlingType"
          xsd:annotation
               xsd:documentation
               Information in a DtResponse about the report handling of the sent payload.
               /xsd:documentation
          /xsd:annotation
          xsd:sequence
               xsd:element name="reportsExpected" type="xsd:boolean"
                    xsd:annotation
                         xsd:documentation
                         True if at least one report is pending (false if the one and only report is contained in response).
                         /xsd:documentation
                    /xsd:annotation
               /xsd:element
               xsd:element name="expectedReports" type="tns:expectedReportsType" minOccurs="0" maxOccurs="unbounded"
                    xsd:annotation
                         xsd:documentation
                         List of expected reports - also including the one optionally included in the response.
                        If reportsExpected is true then this list must contain at least one entry, else it must be empty.
                         /xsd:documentation
                    /xsd:annotation
               /xsd:element
               xsd:element name="dtReport" type="tns:DtReportType" minOccurs="0"
                    xsd:annotation
                         xsd:documentation
                         Optional report if it was synchronously received.
                         /xsd:documentation
                    /xsd:annotation
               /xsd:element
          /xsd:sequence
     /xsd:complexType
     xsd:complexType name="initiationReportHandlingType"
          xsd:annotation
               xsd:documentation
               Information in a DtRequestInitiation about the report handling of the received payload.
               /xsd:documentation
          /xsd:annotation
          xsd:sequence
               xsd:element name="reportsExpected" type="xsd:boolean"
                    xsd:annotation
                         xsd:documentation
                         True if at least one report was requested.
                         /xsd:documentation
                    /xsd:annotation
               /xsd:element
               xsd:element name="preparedReports" type="tns:preparedReportsType" minOccurs="0" maxOccurs="unbounded" /
          /xsd:sequence
     /xsd:complexType
     xsd:complexType name="expectedReportsType"
          xsd:sequence
               xsd:element name="category" type="tns:reportCategoryType" /
               xsd:element name="timeoutDate" type="xsd:dateTime" /
               xsd:element name="deliveryState" type="tns:deliveryStateType" /
          /xsd:sequence
     /xsd:complexType
     xsd:complexType name="preparedReportsType"
          xsd:sequence
               xsd:element name="category" type="tns:reportCategoryType" /
               xsd:element name="timeoutDate" type="xsd:dateTime" minOccurs="0" /
               xsd:element name="reportMessage" type="att:AttachmentRefType" /
          /xsd:sequence
     /xsd:complexType
     xsd:simpleType name="reportCategoryType"
          xsd:restriction base="xsd:NCName"
               xsd:enumeration value="DeliveryReport"
                    xsd:annotation
                         xsd:documentation
                         Report informing about the state of the delivery on a physical base
                         /xsd:documentation
                    /xsd:annotation
               /xsd:enumeration
               xsd:enumeration value="ReceiptReport"
                    xsd:annotation
                         xsd:documentation
                         Report informing about the state of the receipt on a semantic base
                         /xsd:documentation
                    /xsd:annotation
               /xsd:enumeration
               xsd:enumeration value="TransmissionReport"
                    xsd:annotation
                         xsd:documentation
                         Report informing about the state of the transmission on a physical base
                         /xsd:documentation
                    /xsd:annotation
               /xsd:enumeration
          /xsd:restriction
     /xsd:simpleType
     xsd:simpleType name="deliveryStateType"
          xsd:restriction base="xsd:NCName"
               xsd:enumeration value="DELIVERED"
                    xsd:annotation
                         xsd:documentation
                         Delivery proceeded
                         /xsd:documentation
                    /xsd:annotation
               /xsd:enumeration
               xsd:enumeration value="PENDING"
                    xsd:annotation
                         xsd:documentation
                         Delivery pending
                         /xsd:documentation
                    /xsd:annotation
               /xsd:enumeration
          /xsd:restriction
     /xsd:simpleType
     xsd:simpleType name="reportStateType"
          xsd:restriction base="xsd:NCName"
               xsd:enumeration value="SUCCESS"
                    xsd:annotation
                         xsd:documentation
                         Positive report
                         /xsd:documentation
                    /xsd:annotation
               /xsd:enumeration
               xsd:enumeration value="FAILURE"
                    xsd:annotation
                         xsd:documentation
                         Negative report
                         /xsd:documentation
                    /xsd:annotation
               /xsd:enumeration
               xsd:enumeration value="EXPIRED"
                    xsd:annotation
                         xsd:documentation
                         No report received in time
                         /xsd:documentation
                    /xsd:annotation
               /xsd:enumeration
          /xsd:restriction
     /xsd:simpleType
/xsd:schema
Edited by: Riya Patil @SAP on Feb 4, 2010 9:05 PM
Edited by: Riya Patil @SAP on Feb 4, 2010 9:05 PM

Can I set a default alert type in iCal?

For some reason all new events in my iCal (whether I create them, or someone invites me) have two alerts set by default:
1. Email (10 minutes before)
2. Message (10 minutes before)
I don't want either of these as my default, but I can't figure out how to change it. Is it possible to set a default alert type/time?
Macbook Pro
OS 10.7.2
The calendar in question is CalDAV (from Google calendar)

Hi,
In iCal the default alarm type is "message with sound". You cannot change the type of alarm but you can change the offset of it.
Now that you say it is a Google calendar, information for setting default alarms on Google Calendar: Change your default notification settings : Google Calendar Help
Best wishes
John M

Change default security settings for new Discoverer users? How?

Hello, using Discoverer 10g with SSO integration.
I've created two roles and create in advance users in the DB user, granting them
one of the two roles. The two roles privileges for Discoverer are already configured.
This way, when I create the user in the DB before launching Disco, granting the user one or the other role, I should be all set about what the user can or cannot do on Discoverer (Plus).
So far the theory :)
The problem is that the full permission given by Discoverer to each new user override the role settings, so each new user can do everything (instead one of the roles forbids saving and sharing, for example).
I have to go to Disco Admin and uncheck the "Plus/Viewer" checkbox for the user to make roles actually work as expected.
How can I set Discoverer user default as "Cannot do anything" on Plus/Viewer so that roles apply without further admin intervention?
Thanks
Mario

Thanks a lot Rod.
The problem here is we need to allow portal users the ability to access Discoverer Plus without using Disco Admin: once a user is registered in the SSO, he should be able to connect successfully to Discoverer.
So we need creating user privileges on behalf of Disco Admin.
Tough job, but it seems it ca be done.
Regards,
Mario

Default Image settings - handling multiple presets?

Default Image Settings allows for presets based upon camera serial number and ISO.
How is ACR handling overlapping presets? Does the addition of choosing the ISO within prefs simply override the noise reduction and leave the remaining presets untouched?
And, ( should be in feature requests ) would it then be feasible to add a pref in the future to make lens correction presets based upon embedded lens data. I realize that zooms often require multiple CA settings but primes can be relatively stable.
thx
pg103 seems to imply that its either serial number or ISO
>Select the appropriate options in the Default Image Settings section of the Camera Raw preferences to specify whether to associate the defaults with a specific cameras serial number or with an ISO setting.

>Default Image Settings allows for presets based upon camera serial number and ISO.
Uh no...it is wrong to consider the per serial/ISO as "presets"...they are "Defaults"...big difference in implication if not concept. The "Defaults" that are set based on ISO/Serial are hard "all in one" defaults that are captured when you make the current settings the default.
Presets can indeed use overlapping presets because you can save out subsettings as presets. That can't be done with Defaults.
As far as the lens corrections thing, expect interesting developments on that front for the next version.

Google CalDAV and Default Alert Time

I was successfully able to set up one of my Google calendars on my iPhone 3G running 3.0 using CalDAV, but I notice that regardless of what the alert setting is on Google, the iPhone defaults to a 10 minutes before alert setting. I gathered that alert settings aren't properly supported by CalDAV sync, but wondered if there was any way to set the iPhone to default to "no alert" in these instances? I use the calendars a lot, and the alerts are going off constantly.
Thanks!

Michael, starting with Mavericks, the Preferences in Calendar do not allow you to change the default time from 9:00 AM to any other time. The only way to modify the alert time is on an entry-by-entry basis using "Custom...". I want the default time to be something other than 9:00 AM so I don't have to change it in every entry.

Default play settings

Can somebody explain to me how to set the default play settings in iTunes? Here's my setup & desired outcome:
MacMini 10.9 running iTunes, acting as an iTunes server/media center. I would like to AirPlay a movie to an AppleTV device (I have two). When I open & choose a video to play from the iOS remote app, the video plays directly in iTunes on the MacMini. Now, I can choose via the iOS remote app to AirPlay to one of the two ATVs, but I would hope there's a way to make this the default? Has anybody accomplished something like this?

I understand that, and that's all well and good. That part works well. However, I have 300+ movies, and the current Apple TV UI doesn't allow for a quick way to scroll through or, better yet, search for a title. The iOS app allows you to search for a title which what I'd like to do. I find scrolling with the remote on AppleTV way to slow & tedious.

Overriding default printer margins

I am having trouble controlling the margins on my reports. In the report builder i have them set as one thing, but when i run the report they get set to the default print settings on my machine of 1 inch. Is there a way to override a user's default printer settings when printing a report thorugh a browser??
Thanks,
Patrick

Hi Patrick
If I understand your problem correctly, Though you set the margin as say "0" in report, still you see a margin of 1.0 in the output.
If this is the problem, the reason is Reports takes the hardware margin of your printer into account and adds to the margin you set in report.
Generally this is what is the expected behaviour from the users
In Reports 9i, you would see a way of controlling this by command line ignoreMargin
Thanks
Rajesh

Excel 2010 not using the default print settings

Currently got an issue with Excel 2010 not using the default print settings for a couple of users on our network,
basically when pressing cntrl P or selecting the print option from the file menu the printer settings are different to the print settings selected in the devices and printers menu, we have checked the print drivers etc but this has still not resolved the
issue, all other office programs are fine and also other users are reporting this issue more and more with different printers,
tried restarting print spooler service and re-installing office but this has come to no avail,
any ideas would be much appreciated!

Hi,
This issue occurs because the Page Setup settings that you specify in your file override the settings that you specify in the printer driver properties.
To work around this issue, do not specify the paper size, page orientation, or page margins in the printer driver properties. Instead, specify these settings in your workbook.
To specify these settings, follow these steps:
1.Start Excel, and then open the workbook you want to change.
2.In Microsoft Office Excel 2010, click the sheet that you want to print, and then click the Page Layout tab. In the Page Setup group, click Page Setup to open the Page Setup dialog box.
3.Click the Page tab.
4.Under Paper size, click the paper size that you want.
5. Click Options button and in Printing Shortcuts tab, in the Paper source area, perform one of the following steps: ◦If the printer can automatically select the correct paper tray to use, click Default tray in the First page list, and then click Default
tray in the Other pages list.
Default tray is the default setting in both of these lists.
◦If the printer cannot automatically select the correct paper tray to use, you may have to select the paper tray that contains the paper size that you selected in step 4.
To do this, click the appropriate paper tray in the First page list and in the Other pages list.
6.If you want to change the page orientation or its page margins, click the Finishing tab.
7.Select the options that you want.
8.Click OK.
9.Repeat steps 2 to 8 for each sheet of your workbook for which you want to specify settings.
Jaynet Zhang
TechNet Community Support

LOST Default Alert/Ringing/Alarm Tones in Z3 Compact after update in Android 5.1.1

LOST Default Alert/Ringing/Alarm Tones in Z3 Compact after update in Android 5.1.1
I discovered it when I tried to change my Alert Tone, I can no longer find the list of available Alert Tones. When I click on Settings --> Sound & notification --> Notification Sound --> File Commander app --> Music
The Xperia Tones are not there only the App Tones and other sound/music.
I tried changing my Notification Sound in Safe Mode (Hold power off then reboot to safe mode) still the default sounds are not there (I did this to disable installed apps that might be the reason why I cannot see it)
Anyway, this is not a critical issue I just want to know if I'm the only one experience thia after the Android 5.1.1 Lollipop update. I also want Xperia Team to notice/check this issue.
Thanks in advance for the help.

Tones may have changed from what you were use to in previous versions (Just checked and they are different) However if you prefer the old ones then XDA has them here (Click on the Blue Download now not the Orange Download bar)

Calender overriding default alert settings in iOS

Similar Messages

Maybe you are looking for