Calender search help in BBPSOCO01(Workarea)

Hi All,
i have added one custom date field in workarea of soco transaction. I have attached search help to this field in template "SAPLBBP_SOCO_UI_ITS"(200).
The Details are as follow:
Field name:"ZZ_QUTDAT"
Calendar Search help Function: "BBP_ITS_EXTW_INPUT"
Included Service: `include (~service="bbpglobal", ~name="bbpfunctions.html")`
 `include (~service="bbpsc01", ~name="saplbbp_sc_functions.html")`
 `include (~service="bbpglobal", ~name="bbptextarea.html")`
Problem: when i click on search help i get the calender to select the date but as soon as i picked any date,the date is not copied to the field "ZZ_QUTDAT". I get text "undefined" in the field "ZZ_QUTDAT"
Can anyone let me know what i am missing for calender search help. Thanks a lot in advance for your help.
Thanks,
Vivek
`include (~service="bbpglobal", ~name="bbpfunctions.html")`
`include (~service="bbpsc01", ~name="saplbbp_sc_functions.html")`
`include (~service="bbpglobal", ~name="bbptextarea.html")`
` if (ci_zz_qutdat_WL != "" && TC_GROUPAREA-column[ci_zz_qutdat_WL].title != "")`
`TD(align="right", nowrap="x", class=tdcellclass)`
 `BBP_ITS_EXTW_INPUT(id="", type="text", title="",
 formname = bbpformname,
 inputname = "GS_GROUP_AREA_ITEM-ZZ_QUTDAT[" & j & "]",
 inputvalue = GS_GROUP_AREA_ITEM-ZZ_QUTDAT[j].value, mode = "1")`
`end`

Vivek,
Did you get any response? I am having the same problem. Getting 'undefined' for custom search help for date function using this function BBP_ITS_EXTW_INPUT.
Thanks
Balaji

Similar Messages

Eventing on dictionary search help on date field

Hi Experts,
In my WDABAP application I have a Date input field. I have used dictionary search help into this field to display calender searc help.
Now on select of the date from the calender I want to trigger one event which will enable some other fields in the application.
Can you please tell me how to implement this on select event of the date.
Thanks
Sonia.

Hi,
Since you are using an Input Field , only event possible is "On Enter" event.This event is triggered when "enter" key is pressed by the user after selecting a value in the input field.So may be you can use this and proceed further.
Although it may not serve you the actual requirement that you have to achieve , because input field does not have any event for "On select".
[On Enter|http://help.sap.com/erp2005_ehp_04/helpdata/EN/14/0ce74114a1da6fe10000000a1550b0/frameset.htm] this link might help
Cheers,
Aditya.

Call search help as seperately

Hello,
May I know if there is possible to call the popup window for search help directly, but not through the input field which uses the search help.Thank you very much!
Best regards,
Shumin

Hi Shumin,
*& Report ZTEST_SEARCHHELP_ITAB
*& This report is to populate F4 help for custom fields
REPORT ztest_searchhelp_itab.
       TYPES DECLARATION                                        *
TYPES: BEGIN OF ty_mara,
       matnr TYPE mara-matnr,
       mtart TYPE mara-mtart,
       END OF ty_mara.
       INTERNAL TABLE AND WORKAREA DECLARATION    *
DATA : it_mara TYPE TABLE OF ty_mara,
       wa_mara TYPE ty_mara.
     PARAMETERS DECLARATION                              *
PARAMETERS p_matnr TYPE ty_mara-matnr.
   SELECTION SCREEN FOR VALUE REQUEST         *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_matnr.
   SELECT QUIRES FOR CUSTOM FIELDS                *
SELECT matnr mtart FROM mara INTO TABLE it_mara UP TO 10 ROWS.
     FUNCTION MODULE TO POPULATE F4 HELP         *
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield    = 'MATNR'
      dynpprog    = sy-repid
      dynpnr      = sy-dynnr
      dynprofield = 'P_MATNR'
      value_org   = 'S'
    TABLES
      value_tab   = it_mara.
Here you will first fill the table ***it_mara** as per your requirements by the \
Select Query and then you will take the values for Search Help from the same table( it_mara).
Let me know if you have any doubts.
Edited by: AMIT BISHT on Sep 12, 2008 11:11 AM

ALV search help handling

Is there anyone who has experience on providing self-defined search help for the input field in ALV .
Any help would be greatly appreciated.
Thanks in advance!

if you want to have dynamic search help, Pl. see this sample code..may be it will help u.
REPORT zooalvf14 .
Global data definitions for ALV.......................................
DATA : alvgrid TYPE REF TO cl_gui_alv_grid, custom_container TYPE REF TO cl_gui_custom_container, fieldcatalog TYPE lvc_t_fcat.
table to contain fields that require f4............................... DATA : lt_f4 TYPE lvc_t_f4 WITH HEADER LINE.
ok_code declaration................................................... DATA : ok_code TYPE sy-ucomm.
Tables declaration.................................................... TABLES : zemployee_c7.
Types declaration..................................................... TYPES : BEGIN OF ty_emp, empid LIKE zemployee_c7-empid, empname LIKE zemployee_c7-empname, END OF ty_emp.
Internal table declaration............................................ DATA : i_emp TYPE TABLE OF ty_emp.
Workarea declaration.................................................. DATA : wa_emp TYPE ty_emp.
Selection screen parameters........................................... SELECT-OPTIONS : s_empid FOR zemployee_c7-empid.
CLASS lcl_event_handler DEFINITION ---------------------------------------------------------------------
CLASS lcl_event_handler DEFINITION. PUBLIC SECTION. METHODS : handle_on_f1 FOR EVENT onf1 OF cl_gui_alv_grid IMPORTING e_fieldname es_row_no er_event_data, handle_on_f4 for event onf4 of cl_gui_alv_grid importing e_fieldname es_row_no er_event_data . ENDCLASS. ----
CLASS lcl_event_handler IMPLEMENTATION ---------------------------------------------------------------------
CLASS lcl_event_handler IMPLEMENTATION. METHOD handle_on_f1.
custom f1 help for empid field....................................... IF e_fieldname = 'EMPID'. CALL SCREEN 3001. ENDIF.
to prevent processing of standard f1 help............................ er_event_data->m_event_handled = 'X'. ENDMETHOD. Method handle_on_f4. standard f4 help will be invoked...................................... endmethod.
ENDCLASS.
start of selection....................................................
START-OF-SELECTION. SELECT empid empname FROM zemployee_c7 INTO CORRESPONDING FIELDS OF TABLE i_emp WHERE empid IN s_empid. CALL SCREEN 3000. &---- *& Module STATUS_3000 OUTPUT &---- * text ----
MODULE status_3000 OUTPUT. SET PF-STATUS 'ZTOOL'. SET TITLEBAR 'ZTITLE'. IF alvgrid IS INITIAL. CREATE OBJECT custom_container EXPORTING container_name = 'ZCONTAINER'. CREATE OBJECT alvgrid EXPORTING i_parent = custom_container. PERFORM prepare_f4. CALL METHOD alvgrid->register_f4_for_fields EXPORTING it_f4 = lt_f4[] . creating instance for event handler.................................. DATA : event_handler TYPE REF TO lcl_event_handler. CREATE OBJECT event_handler. SET HANDLER event_handler->handle_on_f1 FOR alvgrid. SET HANDLER event_handler->handle_on_f4 FOR alvgrid.
preparing field catalog.............................................. PERFORM prepare_fieldcatalog CHANGING fieldcatalog. CALL METHOD alvgrid->set_table_for_first_display * EXPORTING * I_BYPASSING_BUFFER = * I_BUFFER_ACTIVE = * I_CONSISTENCY_CHECK = * I_STRUCTURE_NAME = * IS_VARIANT = * I_SAVE = * I_DEFAULT = 'X' * IS_LAYOUT = * IS_PRINT = * IT_SPECIAL_GROUPS = * IT_TOOLBAR_EXCLUDING = * IT_HYPERLINK = * IT_ALV_GRAPHICS = * IT_EXCEPT_QINFO = CHANGING it_outtab = i_emp it_fieldcatalog = fieldcatalog * IT_SORT = * IT_FILTER = * EXCEPTIONS * INVALID_PARAMETER_COMBINATION = 1 * PROGRAM_ERROR = 2 * TOO_MANY_LINES = 3 * others = 4 . IF sy-subrc 0. * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4. ENDIF. ENDIF. ENDMODULE. " STATUS_3000 OUTPUT
preparing field catalog............................................... FORM prepare_fieldcatalog CHANGING i_fieldcatalog TYPE lvc_t_fcat. DATA : ls_fcat TYPE lvc_s_fcat. ls_fcat-fieldname = 'EMPID'. ls_fcat-ref_table = 'ZEMPLOYEE_C7'. ls_fcat-coltext = 'EMPLOYEE ID'. APPEND ls_fcat TO i_fieldcatalog. CLEAR ls_fcat. ls_fcat-fieldname = 'EMPNAME'. ls_fcat-ref_table = 'ZEMPLOYEE_C7'. ls_fcat-coltext = 'EMPLOYEE NAME'. APPEND ls_fcat TO i_fieldcatalog. ENDFORM.
&---- *& Module USER_COMMAND_3000 INPUT &---- * text ----
MODULE user_command_3000 INPUT.
CASE ok_code.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE.
" USER_COMMAND_3000 INPUT &---- *&
Module USER_COMMAND_3001 INPUT &---- * text ---- MODULE user_command_3001 INPUT.
CASE ok_code.
WHEN 'SAVE'.
LEAVE TO SCREEN 0.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE.
" USER_COMMAND_3001 INPUT &---- *& Module STATUS_3001 OUTPUT &---- * text ---- MODULE status_3001 OUTPUT. SET PF-STATUS 'GUI'. SET TITLEBAR 'TITLE'. ENDMODULE. " STATUS_3001 OUTPUT preparing fields to be registered for f4 help......................... FORM prepare_f4. lt_f4-fieldname = 'EMPNAME'. lt_f4-register = 'X'. lt_f4-getbefore = 'X'. lt_f4-chngeafter = 'X'. APPEND lt_f4. ENDFORM.
hope this will help you.

Customize search help for date.

Dear All ,
Any Idea how we going to customize / standard function the search help for the date by refering to the closing period month and year.
Example this month closing period is 'July 2009', so when user click on the screen search help date button, the search help will pop up only 'July 2009' calender. Not like standard one with different years and months.
I only want 1 month calender.
Any idea ??
Thanks.

You may need to look into fm
CALL FUNCTION 'F4_DATE'
 EXPORTING
 date_for_first_month = sy-datum " <your date>
 IMPORTING
 select_date = l_select_date
 select_week = l_select_week.
or use class CL_GUI_CALENDAR
a®s

F4 search help is not getting displayed in WAD

Hi all,
For a certain InfoObject we want to add an attribute in the F4-search help. The additional attribute does appear when executing the query in the Bex Analyzer but not on the Web. Can anyone tell me how to achieve this in WAD?
Thanks in Advance

Hi all,
For a certain InfoObject we want to add an attribute in the F4-search help. The additional attribute does appear when executing the query in the Bex Analyzer but not on the Web. Can anyone tell me how to achieve this in WAD?
Thanks in Advance

Issue in custom search help for Suggest Value

Hi,
I have a requirement to have the suggest values pick up the records form any par of the string. Basically, using pattern. I have written the code in search help exit and it work in some cases and doesnt work for others.Eg. The result shows up for 123 but doesnt show for 1234, even though 1234 exists and it had showed up when i keyed in 123.
My select quest works fine and i can see the values in record tab but on the screen. What could be going wrong.
Thanks in advance for your help.
Pris.
PS: the code:
IF callcontrol-step = 'SELECT'.
    DATA:lwa_selopt TYPE ddshselopt,
         lit_selopt_id TYPE RANGE OF yselxyz-builder_id,
         lwa_selopt_id LIKE LINE OF lit_selopt_id ,
         lit_selopt_desc TYPE RANGE OF yselxyz-builder_name,
         lwa_selopt_desc LIKE LINE OF lit_selopt_desc,
         lwa_header TYPE yselabc,
         lit_header TYPE STANDARD TABLE OF yselabc,
         lv_sel_val TYPE ddshselopt-low.
    READ TABLE shlp-selopt INTO lwa_selopt WITH KEY shlpfield = 'BUILDER_ID'."'DKEY'.
    IF sy-subrc EQ 0.
      lwa_selopt-option = 'CP'.
      CONCATENATE '*' lwa_selopt-low INTO lwa_selopt-low.
      MOVE-CORRESPONDING lwa_selopt TO lwa_selopt_id.
      APPEND lwa_selopt_id TO lit_selopt_id.
      MOVE-CORRESPONDING lwa_selopt TO lwa_selopt_desc.
      APPEND lwa_selopt_desc TO lit_selopt_desc.
      CLEAR:lit_header[],record_tab[].
      SELECT builder_id builder_name FROM yselxyz INTO TABLE lit_header
        WHERE ( builder_id IN lit_selopt_id )
       OR ( builder_name IN lit_selopt_desc ).
      SORT lit_header BY builder_id.
      DELETE ADJACENT DUPLICATES FROM lit_header COMPARING builder_id.
      CALL FUNCTION 'F4UT_RESULTS_MAP'
        EXPORTING
          source_structure = 'YSELABC'
        TABLES
          shlp_tab          = shlp_tab
          record_tab        = record_tab
          source_tab        = lit_header
        CHANGING
          shlp              = shlp
          callcontrol       = callcontrol
        EXCEPTIONS
          illegal_structure = 1
          OTHERS            = 2.
      callcontrol-step = 'DISP'.
      EXIT.
    ENDIF.
ENDIF.

Issue Resolved. For less than 50 records, client side filtering takes over. In that case the search help exit will not come into picture. Issue resolved by avoiding client side rendering.
callcontrol-maxexceed = 'X'.
Thanks,
Pris.

How to populate data in MPP through F4 search help(the field should get filtered as per key)

Dear Experts.
I am new to ABAP and hence trying jmy hands on various ways of peforming a task.
I have a requirement. I want to maintain a database tables through MPP : ZLT_Auftrag (Refer Screen Shot 1: Doubt MPP1) and ZLT_Kunde (Refer Screen Shot2: Doubt MPP2)
The fields of ZLT_Kunde are: K1, K2, K3
The fields of ZLT_Auftrag are: A1, A2, A3, A4, P1 P2 and P3 are related as per the key field "A3" (Here A3 = K2)
I want the User to be able to Maintain this table through the Screen that I had created using MPP. (Plz refer the attached Screen Shot3:Doubt MPP3 of the SCREEN in MPP)
When I populate the Kunde name(K1) in the SCREEN (Can be done by F4 Search help), then on hitting the pushbutton "Get Kunde" the kunde Code (K2) appears . Now from here it can be deleted or even a new Kunde name and code can be saved dirctly to the database table : ZLT_Kunde. (Refer Screen Shoot4: Doubt MPP4)
For Example for Kunde (K1)= BASF, Kunde Code (K2) = BSF, the Auftrag should be all those values from ZLT_Auftrag (where A3 = BSF)
When I try to populate the Auftrag value on the SCREEN then on hitting F4 (already created for table ZLT_Auftrag in se11) then I get all the values of Auftrag (A1) from the table ZLT_Auftrag. (Ply refer Screen Shot 5: Doubt MPP5)
MY REQUIREMENT: Here I want that either through F4 help or through drop down ONLY those values of Auftrag-A1 should appear on the SCREEN which satisfies the condition: A3 = K2
I am unbale to get how to do that.
I need your valuable suggstions.
Regards
Chandan

And the code of the MPP is:
*& Module Pool SAPMZDEMO_MPOOL_03
PROGRAM SAPMZDEMO_MPOOL_03.
TABLES: ZLT_MITA, ZLT_Kunde, ZLT_Auftrag, Zlt_Stdsatz.
DATA: flg_lock TYPE c,
* indx TYPE i,
* indxk TYPE i,
* indxa TYPE i,
* TCNT TYPE sy-tabix,
 lv_msgv1 TYPE sy-msgv1.
*DATA: it_mita TYPE TABLE OF ZLT_mita,
* it_kunde TYPE TABLE OF ZLT_KUNDE,
* it_auftrag TYPE TABLE OF ZLT_AUFTRAG.
*& Module STATUS_9000 OUTPUT
* text
module STATUS_9000 output.
SET PF-STATUS 'ZSTATUS01'.
* SET TITLEBAR 'xxx'.
If flg_lock is Not initial.
 LOOP at Screen.
If screen-group1 = 'G1'.
Screen-input = 0.
MODIFY SCREEN.
 Endif.
 ENDLOOP.
 MESSAGE s000(8i) WITH 'Mitarbeiter already locked by user' lv_msgv1.
ENDIF.
endmodule. " STATUS_9000 OUTPUT
*& Module USER_COMMAND_9000 INPUT
* text
module USER_COMMAND_9000 input.
*To Populate Data into Mitarbeiter through Pushbuttons
CASE sy-ucomm.
 When 'OK_GET'.
 Clear : flg_lock.
 IF ZLT_MITA-M1 is NOT INITIAL.
 SELECT SINGLE *
 FROM ZLT_MITA
 Where M1 = ZLT_MITA-M1.
*To create a Lock Object so that when two or more employees are accessing the same data
* at the same time then for the new user the data gets locked and only can been seen in
*display mode
 IF sy-subrc = 0.
 CALL FUNCTION 'ENQUEUE_EZLT_MITALOCK'
 EXPORTING
 MODE_ZLT_MITA = 'E'
 MANDT = SY-MANDT
 M1 = ZLT_MITA-M1
* X_M1 = ' '
* _SCOPE = '2'
* _WAIT = ' '
* _COLLECT = ' '
 EXCEPTIONS
 FOREIGN_LOCK = 1
 SYSTEM_FAILURE = 2
 OTHERS = 3
 IF sy-subrc <> 0.
 flg_lock = 'X'.
 lv_msgv1 = sy-msgv1.
 ENDIF.
 ENDIF.
 ELSE.
 MESSAGE S000(8i) With 'Enter Mitarbeiter Name'.
 ENDIF.
 When 'OK_SAVE'.
 Modify ZLT_MITA.
 IF sy-subrc = 0.
 MESSAGE s000(8i) With 'Data Saved'.
 ENDIF.
 When 'OK_DELETE'.
 IF ZLT_MITA-M1 is NOT INITIAL.
 DELETE
 FROM ZLT_MITA
 Where M1 = ZLT_MITA-M1.
 IF sy-subrc = 0.
 MESSAGE S000(8i) With 'Data deleted'.
 ENDIF.
 ENDIF.
* When 'OK_FIRST'.
* indx = 1.
* When 'OK_NEXT'.
* indx = indx + 1.
* When 'OK_PREV'.
* indx = indx - 1.
* When 'OK_LAST'.
* Describe Table it_mita lines indx.
*To Populate Data into Kunde through Pushbuttons
 When 'OK_GETK'.
 IF ZLT_Kunde-K1 is NOT INITIAL.
 SELECT SINGLE *
 FROM ZLT_Kunde
 Where K1 = ZLT_KUNDE-K1.
 ELSE.
 MESSAGE S000(8i) With 'Enter Kunde Name'.
 ENDIF.
 When 'OK_SAVEK'.
 Modify ZLT_Kunde.
 IF sy-subrc = 0.
 MESSAGE s000(8i) With 'Data Saved'.
 ENDIF.
 When 'OK_DELETEK'.
 IF ZLT_KUNDE-K1 is NOT INITIAL.
 DELETE
 FROM ZLT_KUNDE
 Where K1 = ZLT_KUNDE-K1.
 IF sy-subrc = 0.
 MESSAGE S000(8i) With 'Data deleted'.
 ENDIF.
 ENDIF.
*To Populate Data into Auftrag Through Pushbuttons
 When 'OK_GETA'.
 IF ZLT_KUnde-K2 is NOT INITIAL.
 SELECT SINGLE *
 FROM ZLT_Auftrag
 Where A3 = ZLT_Kunde-K2.
 ELSE.
 MESSAGE S000(8i) With 'Enter Kunde Name'.
 ENDIF.
 When 'OK_SAVEA'.
 Modify ZLT_Auftrag.
 IF sy-subrc = 0.
 MESSAGE s000(8i) With 'Data Saved'.
 ENDIF.
 When 'OK_DELETEA'.
 IF ZLT_Auftrag-A1 is NOT INITIAL.
 DELETE
 FROM ZLT_Auftrag
 Where A1 = ZLT_Auftrag-A1.
 IF sy-subrc = 0.
 MESSAGE S000(8i) With 'Data deleted'.
 ENDIF.
 ENDIF.
*To Populate Data into Position Thorugh Pushbuttons
 When 'OK_GETP'.
 IF ZLT_Auftrag-A2 is NOT INITIAL.
 SELECT SINGLE *
 FROM ZLT_Auftrag
 Where A3 = ZLT_Kunde-K2.
 ELSE.
 MESSAGE S000(8i) With 'Enter Kunde Name'.
 ENDIF.
 When 'OK_SAVEP'.
 Modify ZLT_Auftrag.
 IF sy-subrc = 0.
 MESSAGE s000(8i) With 'Data Saved'.
 ENDIF.
 When 'OK_DELETEP'.
 IF ZLT_Auftrag-A1 is NOT INITIAL.
 DELETE
 FROM ZLT_Auftrag
 Where A1 = ZLT_Auftrag-A1.
 IF sy-subrc = 0.
 MESSAGE S000(8i) With 'Data deleted'.
 ENDIF.
 ENDIF.
 When 'OK_EXIT'.
 Leave Program.
 When 'OK_CLEAR'.
 Clear : ZLT_MITA, ZLT_KUNDE, ZLT_AUFTRAG.
* it_mita, it_kunde, it_auftrag,
 CALL FUNCTION 'DEQUEUE_EZLT_MITALOCK'
 EXPORTING
 MODE_ZLT_MITA = 'E'
 MANDT = SY-MANDT
 M1 = ZLT_MITA-M1
* X_M1 = ' '
* _SCOPE = '3'
* _SYNCHRON = ' '
* _COLLECT = ' '
ENDCASE.
endmodule. " USER_COMMAND_9000 INPUT
*& Module user_cmd_9000 INPUT
* text
module user_cmd_9000 input.
If sy-ucomm = 'OK_CANCEL'.
LEAVE PROGRAM.
ENDIF.
IF sy-ucomm = 'OK_EXIT'.
 LEAVE PROGRAM.
ENDIF.
endmodule. " user_cmd_9000 INPUT

F4_FILENAME in search help in screen painter

Hello gurus,
I want to design a screen in which the text input field is used to get file name. For that i need to enable file search in local folders and drives with f4 key press. I wish to use the functionality of function module 'F4_FILENAME" in screen painter. How can i do that?
I tried creating search help for RLGRAP structure. It compiles fine but gives the message 'No inout for selection'.
What should i do?

Thank you all,
The problem has been solved.
I am posting the final code.
1. In se38, i created program zprogram.
2. In se51, i created a screen for the program zprogram.
3. In layout, i took 2 buttons and one input/output field.
1st button for import and 2nd button for exit.
4.In flow logic-
i wrote the follwing code.
PROCESS BEFORE OUTPUT.
MODULE STATUS_100.
PROCESS AFTER INPUT.
PROCESS ON VALUE-REQUEST.
FIELD FILENAME1 MODULE F4_FILE_SEARCH.
5. IN THE MAIN PROGRAM
i wrote the following code-
REPORT ZPROGRAM.
DATA: FILENAME1 TYPE RLGRAP-FILENAME,
           OK_CODE TYPE SY-UCOMM.
CALL SCREEN 100.
MODULE F4_FILE_SEARCH INPUT.
OK_CODE = SY-UCOMM.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
    FIELD_NAME         = 'FILENAME1'
IMPORTING
    FILE_NAME           = FILENAME1
ENDMODULE.
MODULE STATUS_100 OUTPUT.
CASE OK_CODE.
WHEN 'IMPORT'.
MESSAGE 'THE FILE IS RECIEVED' TYPE 'I'.
WHEN 'CANCEL'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE.
I REFERRED TO THE DEMO PROGRAM MENTIONED
IN OTHER POST
NAME OF THE DEMO PROGRAM IS - DEMO_DYNPRO_F4_HELP_MODULE

Creating search help for a field in AdHoc Query

Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten

Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten

Question on Search Help and Authorization Check for Sales Order Type

Question 1:
When I go to VA01 and click the search help, it shows only order type that are not blocked.
However, when I have sales order type in select-options of a Z program,
S_AUART FOR VBAK-AUART
I click on the search help, it gives all the sales order types. How can I have a list with unblocked sales order type only?
Question 2:
I want to check whether a use can extract data from a sales order type (e.g. OR and RE)that he/she authorized to use.
I have include the following in my program:
AUTHORITY-CHECK OBJECT 'AUART'
ID 'AUART' FIELD 'OR'.
It always returns SY-SUBRC = 12.
But order type 'OR' is granted to the user (he/she can create order with type OR in VA01)
Please kindly give me some ideas, thanks.

hi,
ad1
use following code:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR auart.
PERFORM auartGet.
FORM auartGet.
    CALL FUNCTION 'RV_HELP'
         EXPORTING
              KEY            = VKORG
              KEY2           = VTWEG
              KEY3           = SPART
              KEY4           = '0'
              NUMBER         = '008'
              FIELD_IN       = AUART
         IMPORTING
              FIELD          = AUART.
ENDFORM.
ad2.
example:
   AUTHORITY-CHECK OBJECT 'V_VBAK_AAT'
         ID 'AUART' FIELD 'OR'
         ID 'ACTVT' FIELD '01'. "01-create order, 02-change, 03 display
check sy-subrc eq 0.
regards,darek

Search Help Not show/display the data

Dear All,
              I have created a search help whith mannual itab of 4 entries. Itab is filled correctly, but when i see in the screen field it show the search help and display no record with the message 4 entries found; but I can't see the data.
pls. guide me what can be the problem
Thanks and Regards,
Sohail

Hi,
If you want to Show the Search help for Particular Field in Screen painter , You must give the Code In PROCESS ON VALUE REQUEST(POV).
ie.
process on value-request.
field P9611-REQ_STATUS module GET_REQ_STATUS.
and in Program Give the internal table Fieldname in Capital Letter while Passing in Fuctional Module.
like.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'REQ_STATUS2'    "internal table field
      dynpprog        = sy-dynnr
      dynpnr          = sy-dynnr
      dynprofield     = 'P9611-REQ_STATUS' "screen field name
      value_org       = 'S'
    TABLES
      value_tab       = req_status_tab "internal table
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc NE 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
With Regards
Kesavaperumal

Not able to get the data in custom search help.

Hi ,
sorry was not aware of how to post a new thread.
I am working on web UI and i need help asap.
I want f4 help whose value depends on the other fields drop down.somhow i managed to get the values in local table and passed it to static attribute of the z class ZL_CRM_UIU_ZZORDERADM_H0201_G.
in this z class i have redefined a method IF_BSP_WD_CUSTOM_F4_CALLBACK~RETRIEVE_CUSTOM_VALUES.
which returns a table CT_RESULTS_TAB of type as f4.i have taken key n values in this table too.but the below code should populate the value in the field.but m not getting the values.
move 'STRUCT.ZZORDERADM_H0201' to ls_map-context_attr.    "#EC NOTEXT
condense ls_map-context_attr no-gaps.
ls_map-f4_attr = 'KEY'.
append ls_map to: lt_outmap.
lr_entity ?= me->collection_wrapper->get_current( ).
if lr_entity is bound.
    move 'STRUCT.ZZORDERADM_H0201' to lv_controller_key.
    call method cl_bsp_wd_reference_tool=>set_reference
      exporting
        iv_remove_existing = abap_true
        iv_controller_key = lv_controller_key
        iv_controller_ref = lr_entity.
    concatenate '\''' lv_controller_key '\''' into ls_map-context_attr.
     ls_map-f4_attr = if_bsp_wd_custom_f4_callback=>gc_key_ref.
    append ls_map to lt_inmap.
endif.
create object rv_valuehelp_descriptor
    type
      cl_bsp_wd_valuehelp_f4descr
    exporting
      iv_help_id                  = '(ZL_CRM_UIU_ZZORDERADM_H0201_G)'
      iv_help_id_kind             = if_bsp_wd_valuehelp_f4descr=>help_id_kind_comp
      iv_input_mapping            = lt_inmap
      iv_output_mapping           = lt_outmap
      iv_trigger_submit           = abap_true.
can you please help me??

To Implement Search help for UI field same GET_V method need to implement, no need to implement GET_P method.
Initially we must have one search help in SE11
DATA:
lv_index TYPE string,
ls_map    TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
lv_index = iv_index.
ls_map-context_attr ='STRUCT.YYSURVEY_ID' .               "#EC NOTEXT
ls_map-f4_attr = 'SURVEYID'.                              "#EC NOTEXT
APPEND ls_map TO: lt_inmap,lt_outmap.
ls_map-context_attr = '\''BUS2000116\''' ."#EC NOTEXT
ls_map-f4_attr = 'object_type'.                               "#EC NOTEXT
APPEND ls_map TO: lt_inmap.
CREATE OBJECT rv_valuehelp_descriptor
TYPE
cl_bsp_wd_valuehelp_f4descr
EXPORTING
iv_help_id                  = 'CRM_SURVEY_ID'      'SE111 search help name
iv_help_id_kind             = if_bsp_wd_valuehelp_f4descr=>help_id_kind_name
iv_input_mapping            = lt_inmap
iv_output_mapping           = lt_outmap.

SY-TABIX within a search help exit...

Hallo all,
I tried to find an answer in earlier postst, but did not succeed, therefore this message.
I have built a customtabel with several columns. For one of the columns I have built a custom search help, including some coding in the search help exit. In this coding I want to do a different selection based on the value in another column (BUKRS) of the same table. Do you understand what I mean?
The trick is to retrieve the right value of in the column BUKRS in the same line of the table, at the moment I am pushing F4 for another column.
And I dont know how to do this. I dont have the right SY-TABIX value, so this is not helping.
Does anybody have an idea as how to tackle this?
Kind regards,
Erik

Hello Francois & Holger,
Thanks for the reply, but Iu2019m calling this searh help from the transaction SE16 itself, so I donu2019t have my own table control. I am also using the search help in another situation (from a custom-made screen) and here I can pass on the value via a parameter, but this is not working in the case I described.
So the SY-STEPL is not working too....
Kind regards,
Erik

Search Help not getting displayed

Hi ,
I have included my own Search Help ZSH to Standard Search Help MAT1 which is related to field MATNR , in the following path..
In MAT1->MAT1_A, I have INCLUDED my Search Help.
I have tested it in SE11, it's working fine.
But, in VA01 screen when I press F4 on the MATNR field only 9 Search Helps are displayed, and my Z-Search Help is not getting displayed.
What additional settings should I do for the display of my Z-Search Help?
Thanks in advance,
Shivaa...

Also look at this thread Search help enhancement - VA01
Regards,
Raymond

Calender search help in BBPSOCO01(Workarea)

Similar Messages

Maybe you are looking for