Calender Sync issues after 4.3 upgrade

Since completing the recent iTunes (10.2) and iPod (4.3) upgrade, iTunes will not allow my 4th gen iPod touch to sync the calendar. I rely heavily on these functions for work. I currently use Outlook 2010 and need help!

Hi,
I don't know if your problem is solved yet, but if not, see my posts on:
https://discussions.apple.com/message/15841192#15841192
This might help you.
Frank

Similar Messages

  • MobileMe Sync Issues after Snow Leopard Upgrade

    After installing Snow Leopard, MobileMe has been acting up specifically with syncing.
    I have tried to reset it via the instructions found here: http://support.apple.com/kb/HT1497
    I am hoping it will be corrected and stays corrected. If you have the same issues, please let us know.
    Thank you.

    This solution has helped some with MobileMe syncing.
    1. Close all programs
    2. Logout from MobileMe in System Preferences > MobileMe.
    3. Run Disk Utility/Repair permissions from your startup drive.
    4. Restart computer.
    5. Login to MobileMe, and reset your sync choices.
    6. Try syncing.
    The first sync may take a good while, and you may be ask if you want to merge, overwrite. etc.

  • I have music loaded from cd's. They were intact after each sync. After a iTune upgrade, I lost all the music at sync. Can I restore them from old backup in iCloud ?

    I have music loaded from cd's. They were intact after each sync. After a iTune upgrade, I lost all the music at sync. Can I restore them from old backup in iCloud ?

    Unless you'd signed up to iTunes Match then they won't be in the Cloud, only music purchased from iTunes (if you are in a country where music can be re-downloaded) will be there. Have you not still got it on your computer and/or on a backup which you can use to sync it back to the iPad ?

  • IPhone syncing issues after iTunes upgrade

    Hi
    I just upgraded to iTunes 8.1.1 for Mac. During the install I got a kernel panic and had to restart. iTunes seems to be installed fine. When I connect my iPhone I get messages like "some content will not be copied to the iPhone as this computer is not authorized" or such like. So now several apps, videos and music has been wiped from the iPhone.
    I tried authorizing the computer but I just get "This computer is already authorized".
    there does not seem to be any particular link between the erased content. Some was purchased on the Mac and some on the iPhone, all from the iTunes store. Before I updated iTunes everything synced fine.
    I can d/l the apps again direct to the iPhone but I can't find a way to get the missing music and videos back on the iPhone. Very annoying.
    Would re-installing iTunes help?
    Any ideas?
    Thanks
    Chris

    Hi Chris,
    Try highlighting the one of the songs that will not sync in iTunes> cilck File> Get Info, check the account name and verifying you are authorizing the computer with correct account.
    If the issue persists, try removing the SC Info folder as shown here: http://support.apple.com/kb/TS1389
    If you still see the issue after removing the SC Info folder, try reinstalling iTunes as shown here: http://support.apple.com/kb/HT1224
    -Jason

  • Yahoo mail sync issue after upgrade to iOS 5

    After i have upgraded to iOS 5 my emails from Yahoo are a month off.
    Only the emails from a month before are synchronized. As an example, today 10/24 I can see the emails from until 9/13.
    Any ideas on how to fix this?

    Ok, thanks everyone's experience sharing with each other. after I try so many time with my bro for this issue, finally we got solution to solve this issue.
    I'm using iPhone 4 and my bro is using iPod touch 4th Generation, we both upgrade to iOS 5,
    then I was thinking that when I do Facetime setting, there is a selection that you can use your Apple ID as your Facetime account, so I changed my Facetime account with Apple ID, the default setting is using your phone number. then its works!!  now I can use Facetime with my bro in airplane mode.
    I guess before I upgrade iOS 5, iOS 4 allow Facetime auto detect to use phone number(if airplane mode is off) or use Apple ID, which your email address to connect to another user, but iOS 5 not allow it or disable auto detect, (I just guess). 
    anyway now I only use Apple ID as my Facetime account, then I can use Facetime under airplane mode. hope it help you guys.

  • Syncing issues after updating to 10.3.1.55

    After upgrading to itunes 10.3.1.55, today, it no longer recognizes my iPhone 4. I plug it in, the iPhone makes its normal syncing noice. I get a prompt, like always about it recognizing the camera and how i want to handle it. I cancel it, as usual, and then it never shows up in iTunes. I close itunes, connect my phone and it does not start itunes as it normally should. No error messages, just no response. Can anyone help with ideas?

    I had the same issue, after updating to 10.3.1.55 it would error out saying something along the lines of not being able to read the catalog or something.  I think the error even states do a restore to fix it.  Last night that is what I did, clicked restore and then had it transfer all my items back.  I'm glad I had just synced my phone prior to the update so the restore was really current.

  • Can't sync audiobooks after IOS 5 upgrade.

    After IOS 5 upgrade I am unable to Sync my iphone 4 either by WiFi or connected via USB.
    Itunes becomes un responsive after "Determining tracks to sync".  Have been able to sync only after disabling Audiobooks sync.
    SO far have done the following.
    - Changed the USB cable
    - Re "Keep Library Origanized"
    - Created new playlist with 1 audiobook.
    Itunes crashes everytime.
    Have been able to sync my ipad 2 & nano with no issues.
    Anyone have any ideas before I toast my iphone & start from scratch?

    Nothing syncs if I have sync audiobooks turned on.
    First I didn't know what the problem was and I even wiped my iPhone and started from scrach (what a pain it was).
    Nothing. No music, no Apps, no ringtones, no audiobooks.
    I installed some apps via the app store, and some audiobooks with audible app.
    But the rest still didn't work.
    Then I clicked "Tranfer purchases from ...'s iPhone" on iTunes and some of my music and ringtones started to transfer to the iPhone!! Partially. I had to click it again to get the rest of the music and ringtones. But the audiobooks didn't transfer. Not even from a playlist.
    After I unchecked Sync Audiobooks, I managed to get some apps transfered to the iPhone but they're still "Waiting" not "Loading." Every time I click on sync a little bit of the apps transfer, but then their status goes back to "loading."
    My biggest problem is that I have non Audible audiobooks. These I don't know how to put in the iphone.

  • Sync Issue After Compressing MPEG-2

    My source is a true 24fps file (NOT 23.98!) from Avid.
    When I used compressor to create a 23.98 MPEG-2 file, I noticed that the picture would occasionally jitter. After looking in the Compressor manual, on page 190 I saw,
    "NOTE: If your source video has a frame rate of 24.00 fps rather than 23.98 fps,
    Compressor skips one out of every 1000 source frames. If the 24p source video is
    23.98 fps, Compressor transcodes all source frames, without skipping (or repeating) any of them."
    Oh great, that's expected behavior. So I open up the 24.00 fps QuickTime in Cinema Tools, conform it to 23.98, and put it back through Compressor.
    Bingo! No more skipped frames.
    But now the audio is running at 47.952 kHz, and when I put it into DVDSP, it starts running at 48 kHz, throwing everything out of sync. This happens with both AIFF and AC3's.
    Basically, the problem is that I'm slowing down the video by .1%, so now I have to slow the audio down, too.
    I tried using both Avid and FCP to slow the audio down by .1%, then re-exporting at 48 kHz, and I also tried laying the audio off to tape, and then digitizing it into a 29.97 project. But when I'd export the audio and put it into DVDSP, it's still a few frames off by the end.
    This makes me think that maybe Compressor or Cinema Tools is changing the frame rate to 23.98 instead of a true 23.976 fps. Can anyone confirm or deny?
    I'm working on a 90 film, so the sync issues are quite noticeable by the end, and trying a bunch of different things is very time consuming. Any workflow advice would be greatly appreciated.
    Thanks for your help!

    My iPad under 4.2.1 is working fine, but my iPhone 4 is messed up. After the upgrade, my MobileMe settings were just plain wrong (they were working prior to the upgrade). I had to delete and re-add MobileMe, and now my contacts are not updating on the iPhone. The Calendar was slow, but it did eventually update. I've tried rebooting the device, stopping and starting contact sync through MobileMe, with no luck so far.

  • Sync issues after iOS 8 update

    Hi,
    I have an iPhone 5S, 64 GB. After updating to iOS8 I got sync issues. "Waiting for changes to be applied" never disappeared. Also the storage usage in iTunes 11.4 is wrong. iTunes said I had 6GB free, when I had in fact 20GB. I restored the phone back to firmware, restored the backup. All was fine until I made setting changes in iTunes what I want to sync. The same issue in iTunes is back again. I already deleted my voice memos as someone recommended in another threat but that didn't help.
    Any ideas how I can solve the problem, would be appreciated. Thank you!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Has any seen collection issues after 11g database upgrade?

    We do have an SR open.
    Just wondering if anyone else has experienced collection issues after upgrading the db to 11g? Our technical folks are hoping it is something else but for the past few weeks we have seen random issues stemming from collections. We run a full collections 5 nights a week. There are material transactions occurring during the two plus hours of collections. This seems to be randomly skewing on hand snapshots in collections as well as missing supply i.e. work orders. Only impacts a fraction of the records in material transactions and they are different every night.
    Reason I believe it has to do with transactions during collections is one collection run out of the five is generally pretty good...Sunday evening for there is very limited transactions taking place on this evening.
    Thanks in advance

    Answer to above question not required now as:
    Having read the 24th December update of note 761570.1 - 'Database Preparation Guidelines for an Oracle E-Business Suite Release 12.1.1 Upgrade' I have decided to upgrade the database to 11.2.0.x by following the Path C option.
    Unfortunately as the 11.2.0.x upgrade isn't covered by MWIZ yet I will have to follow the manual steps.

  • IPhone User Guide Format Issue After 4.3 Upgrade

    The iPhone User Guide is no longer formatted properly since I upgraded to iOS 4.3. Although the info is there, the top third of the screen remains stationary, while the rest sometimes scrolls. On some screens, it's not possible to scroll down enough to see all the info. Has anyone else had this issue after upgrading? If so, what did you do to resolve it? I'd appreciate any suggestions. Thanks.

    Have taken to downloading the PDF but it's not nearly as quick and easy to use.
    You need to restore your phone in iTunes, first using a backup, and if needed as a new iPhone, without using a backup. All is explained in the User Guide.
    Starting to question why I did't go android. I thought apple products err just supposed to work!
    No one here cares if you go androgynous. I'm sure they all work perfectly all the time.

  • Exporting issues after 4.2 upgrade

    Has anyone else experienced exporting issues after installing the 4.2 upgrade? It used to be a breeze but now I keep getting the message that a destination folder has not been specified even though I've done that. Any feedback would be greatly appreciated! Thank you.

    Are you using an Export preset, or setting the Export up manually each time? 

  • Constant Outlook Sync Issues After Migrating Mailbox 2003- 2010

    Hi all,
    I am trekking along with my Exchange 2010 implementation and yesterday I went ahead and migrated my mailbox from 2003 to 2010.  I am able to send/receive without issue, but I am having a lot of Sync Issues. 
    Some of the issues (conflicts) seemed to be resolved by removing and recreating my Mail profile within Control Panel, but I still get Sync Issues when sending mail.  The logs look as follows:
    11:03:51 Synchronizer Version 14.0.4760
    11:03:51 Synchronizing Mailbox 'Paul Newell'
    11:03:51 Synchronizing local changes in folder 'Drafts'
    11:03:51 Uploading to server 'CAS-HUB.domain.local'
    11:03:51 Synchronization of some deletions failed.
    11:03:51
     [0-130]
    11:03:51
       1 item(s) deleted in online folder
    11:03:51 Done
    Any ideas on what is going on and how to remedy this?  The only thing that I see that is a little odd is that the "Updating server" section has the name of my CAS/HT server, not my Mailbox server. 
    Thanks in advance! 

    Hi Andy,
    Thanks for the link.  I actually found
    this one which told how to create them via Exchange Shell.  That article also said you cannot manage Managed Folders through the EMC in 2010 SP1.  Furthermore, in my EMC (Retention Policies tab) I have an option to "Port from Managed
    Folder to Tag", which leads me to believe that the "Retention Policies" and "Retention Policy Tags" are replacing "Managed Folders".  Heck, even pressing F1 in the EMC while viewing the "Retention Policy Tags" I get a "Content cannot be found" page. 
    :p 
    I venture to believe these are the same thing though (just a different verbiage or an update to the Managed Folders) as I have a ton of default tags created that have actions such as "Delete and Allow Recovery" with an Age Limit for Retention of various
    day-lengths.  I was also able to create one here to delete items in the "Sync Issues" folder after 30 days. 
    Is this new with 2010 SP1 or did I get some crazy version that no one knows about yet?  ;) 
    Thanks again! 

  • IPad 3 sound issues after iOS 8 upgrade

    iOS sounds and some apps have very little or no volume after iOS 8 upgrade.

    Hello mhael, 
    Thank you for participating in the Apple Support Communities. 
    If you experience popping sounds and distortion from your iPad Air speakers after updating iOS, start with the troubleshooting steps in this link:
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    All the best,
    Jeremy 

  • Mac OS X 10.6.5 fixes sync issue after upgrading to new MobileMe calendar

    The issue that prevented iSync from 'seeing' calendars after upgrading to the new MobileMe Calendar has been fixed in iSync 3.1.2, part of the Mac OS X 10.6.5 update.

    Appointments made on my phone are now synced to the local calendar. How do I get these in the cloud and synced with my other devices (macbook and ipod touch)?
    Unfortunately, this is the way it works now. I asked Apple about this and got the following response:
    +"Events from CalDAV calendars can be synced via iSync to a phone, but events can only be created on local calendars. This is as designed."+
    I haven't tried it yet, but I presume you drag events from the local calendar to the MobileMe calendar, but I don't know how this would handle duplicates.

Maybe you are looking for

  • Multiple HTTP requests using single HTTPService component

    Hi, I am having one requirement, I need to use a single HTTPService component to send request to a same and single ASP.net multiple times. How can I acheive that..? I know that I can acheive this by sending one request at a time and after the "result

  • Sector unreadabe error

    Hi chaps, I am having a real problem here and really don't know what more I can do I have a video ts folder built in DVDSP, I've tried several versions of Toast I've tried burning to my iMac internal ... drive and an external Sony writer, three diffe

  • How to calculate value based on two fields & set that on the 3rd (in table)

    Hi OAF Gururs I have a requirement in which, in an OAF page, the user can add a row in an advanced table and they enter the values for two fields say 'rate' and 'entered amt' and immediately on tab out, the 3rd field should be popluated as rate*enter

  • Get rid of the "P" when to close to mic

    I am nto sure how else to explain this but you know when someone holds their mouth too close to the mic and when they pronounce anyting with a "P" in it, the sound spikes and mkaes a loud POP? How do you get rid of that? I have tried "remove pop's an

  • ACC doesn't create duplicate.

    I've read all the tutorials about how to make a custom ringtone. I am running the latest version of itunes. The problem is when I right click the edited song and select Convert to ACC, it shows that it's converting, but then no duplicate file appears