Calenders hidden under Windows pane

I noticed in ICal two of my entourage calenders are located in the windows pull down menu under availiability. When I select them these calenders pop-up but they do not show under the calenders in the main window. How can i transfer these back to the main calender window.

Hi,
Under 10.6 you will find the option to include them in iCal's Preferences > Accounts tab > Delegation. Put a check next to the ones you want to see in the main window. (Your details show 10.5.7 though)
Best wishes
John M

Similar Messages

The ADF Mobile preview pane doesn't work under Windows 8.

The ADF Mobile preview pane doesn't work under Windows 8 64bit even I use Jdeveloper version 11.1.2.4.0,but I use windows 7 64bit or windows xp works fine.
How to fix it, please.
Thanks !

Hi,
I installed JDeveloper 11.1.2.4 on my Windows 8 machine and then the ADF Mobile extension. I can open the previewer for ADF Mobile. So there is no problem with this on Windows 8. I used the generic installation, which is that I installed the JDK and then run the Java -jar command for the JDeveloper install.
Frank

Review comments completely hidden by freeze panes in VBA Excel

Hello
I have a worksheet with review comments attached to the cell during run time. I use these
review comments like tool tips to explain the user that the field is a mandatory field and it must be entered .
I also used the Freeze Panes feature to keep the left side columns say (4 columns) visible
as the worksheet is scrolled horizontally. However, the review comments are visible when it is not scrolled but they are hidden under the frozen pane when the worksheet is scrolled horizontally.
The review comment that overlaps the boundary is no longer visible when scrolled completely.
Is there any way to prevent this from happening? Please suggest
Thanks and Regards
Kamal
Kamal

Hello Zhang
Thanks very much for your response and suggestions
I have tried increasing the width of the column D but still the review comments are getting hidden under the frozen panes. Dragging of comment window is not possible as these review comments are attached to the cell at run time.
Trying the data validation technique will not be a better choice. The reason is i am validating all the fields present in all the rows at once in a single button click . Correct me if i am wrong...The reason is if the user doesn't enter the
value for this column for at least (say 10 rows) then it might fire the validation pop up ten times.This will make the user to clear the validation pop ups first and then enter the values for all the left rows. If i add review comments then it will just add
a red mark at the top right corner of the cell along with the review comments which will help the user to understand that it is a mandatory field.
So, Please suggest a solution regarding how to handle the case related to the review comments that overlaps the boundary is not longer visible when scrolled completely.
Thanks and Regards
Kamal

All-in-one driver installation fails under Windows 7

I am trying to install the all-in-one printer driver for Windows 7, 64-bit, Service Pack 1. I have downloaded the installer from HP (AIO_CDB_Net_Full_Win_WW_130_141.exe), downloaded it using HP Print and Scan Doctor 4.3 and using the HP Printer Install Wizard (hppiw.exe). All methods fail. My computer is a new Dell Inspiron (Intel i5-4440 @ 3.1GHz, 8GB RAM, 64-bit OS). The printer I am installing for is a HP 6310, which is old but which has worked well for years under Windows XP. I don't think the printer is an issue since the installer never reaches the point of scanning for hardware.
Symptoms:
Installing using the downloaded installer, the initial splash screen displays. Selecting "Install" displays a second screen with several progress indicators beginning with "Checking system...". After checking for a few seconds, an error box pops up complaining that it can't find a file named "hpzpnp.ice_suffix..exe".
There are two files in the Setup directory named "hpzpnp01.exe" and "hpzpnp04.exe". The Autorun file contains many references to an %ICE_SUFFIX% environment variable.
I guessed that the installer executables did not have enough privelege to set environment variables, so I went through the installer directories and set all the executables to run with administrator privelege.
After that, running "Setup.exe" from the top of the install tree, the initial splash appears, followed by the second "checking system..." progress display. Then a new window with advice about keeping firewalls turned on, etc. pops up. Continuing from that point pops up a new error box saying:
"The specified path is too long C:\Program Files (sLar dig mer med hjalp av en demo pa skarmenHitta enkelt dina foton med onskad metod-Datum, Markning, Mappar, Sok, Favoriter)\HP\."
I have done this multiple times, and the parenthesized phrase (Swedish?) is sometimes different, but always wrong. It looks to me as though the installer is trying to decide whether to install 32- or 64-bit drivers, but can't decide which. It fails to initialize a string variable and concatenates garbage onto the "C:\Program Files" path string.
I have also seen an error box with the following error near this point:
"C:\Users\Sid\AppData\Local\7zS4689\Setup\hpzrein01.exe" "-wStub" "3...
"The parameter is incorrect."
Clicking OK on the error box aborts the installation.
Installing using the HP Printer Installation Wizard produces the same error message as the initial attempt with the downloaded installer about missing files with names containing "ice_suffix".
Installing using the HP Print and Scan Doctor progresses as far as the "path is too long" message.
I've done this now many times, trying different things, without success. After each attempt, I run the Uninstall_L4 utility in utils\ccc under the installer tree, then run the OS Disk Cleanup utility. Following an earlier post, I installed the latest version of Flash Player, with no change in symptoms.
Any fresh ideas would be much appreciated.

Hi ehildum,
Thank you for the time and effort you put into your post. I can see you have done plenty of troubleshooting on your own, but I do have an idea.
If the USB cable is plugged in this could be causing issue. Assuming it is connected, let's unplug and take a look at the Device manager. The hpzpnp.ice_suffix indicates a plug and play 'pnp'.
Follow these steps and let me know what happens.
Click on Start
Right click on Computer
Select Manage
On the left panel, click on Device Manager
Click on View at the top and select Show hidden devices
Look in the list for Other devices
If you see the printer here, right click and select uninstall
Look in the list and click on the arrow next to Printers
If you see the printer here, right click and select uninstall
Delete all files in the %temp% folder
Restart the computer
Open the installer from your download (AIO_CDB_Net_Full_Win_WW_130_141.exe)
Do Not plug the USB cable in until the software says so.
Please let me know the outcome of these efforts. If your USB cable was not connected please complete the above steps anyway to see if there is something stuck in the Device manager that could be causing the conflict.
I look forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Top 2-3 files displayed in Finder are hidden under Finder's menu bar. How do I modify view to correct this?

Recently updated to Yosemite 10.10.2 on MacBook Pro (early 2011) and now when I open a folder in Finder, the top 2-3 files displayed are hidden under Finder's menu bar. I can scroll up to see the files, but they snap back under the menu bar preventing me from selecting or opening them. This problem occurs in the following Finder view preferences, "icons" "in lists" and "in columns" but not "Cover Flow". Any assistance would be appreciated. Thank you.

This sounds like a Windows thing ( You can post a photo and I can tell you for certain). Those folders are Windows system created folders that your computer has had since it was installed, all Firefox does is use the Windows File picker, which is what you see when you open that window. So, to customize you'd have to do that from Windows Explorer (not Firefox).
The Window should however remember what folder you were in last.

Making those window pane bars go away

I'm sure that is the dumbest question to date, 'cause I'm sure it's obvious to everyone else, but I haven't been able to find the answer anywhere.
Here's the deal: I got a psd file with several layers in it from another person. I have successfully worked with it in the past with no problem. Tonight, when I went work with it, I find window panes separated by multicolored bars obscuring parts of the image as I try to work with it.
I've looked everywhere for help about panes and/or bars, but nothing comes up. I've looked at all the preferences, but none seems to apply. The various view options don't seem to have any effect.
The bars show up in "standard edit," and in the "before" view of "quick fix," but sometimes, when I work in "quick fix" mode, they also show up in the "after" view.
How do I make those pesky bars go away so I can see what I'm working with?
Ken
PS: Might this have something to do with the fact that I'm now working with Vista?

I was trying to run Photoshop Elements 3.0 on my new Vista PC. I decided to download and install PSE 5.0. This was anything but a trouble-free installation, but when I finally got it running the bars went away.
While I was trying to get PSE to work under Vista, I discovered that there is a plug-in available for Paint.net that allows it to handle photoshop's PSD files. I installed the plug-in and found that Paint.net handles the PSD files I have been working with just fine.
Given that Paint.net is free and has always worked perfectly with Vista, I've given up PSE in favor of Paint.net. PSE is too troublesome, too complex and too costly for me.
Ken

HTMLBrowser PJC under Windows XP

Hi
I have tried installing the htmlbrowser pjc available here:
http://forms.pjc.bean.over-blog.com/article-1890238.html
I could not get the pjc to work. I raised this as a SR with oracle support which is here
https://metalink.oracle.com/metalink/plsql/f?p=110:20:8078722417852957408::::P20_TARNUM,P20_CTRYCODE:5690790.993,840
When I run the supplied demo form I get the error:
"unable to build HTML pane for http://sheikyerbouti.developpez.com/beantimer/beantimer.htm:java.io.IOException: Connection failure with 407"
I thought it might be related to the intial URL being used so I tried to edit the java source and deploy a new .jar file. After I signed the new jar and ran the demo form I saw the following error in the java console.
Forms Applet version is : 10.1.2.0
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection
failed.
Oracle support confirmed that they had the same problem under Windows XP but the PJC worked fine under Windows 2000.
Has anybody used this PJC successfully on windows XP? Or can anybody tell me what I need to do to fix it for XP?
As a secondary question - why do I see the class not found exception after compiling the source into a .jar?
thanks
Paul Schweiger

While I never used linux, I highly doubt this. A 99.99999999573% doubt, to be exact.
you can't run a windows application on a mac or on old versions of windows - it's quite simply a completely different system. Plus, I'm not even sure linux has EXE files.
I think you can use a windows emulator to run these files, but I doubt this will work well if you have hardware, and will probably even be slower than windows(due to the emulation).
All that said, you should be able write VIs in LV windows and then open them in LV linux and build the application, assuming they don't have windows dependant code. Also, what do you mean by real-time? If you're doing real real-time-absolutly-can't-fail stuff, a PC won't be the right thiing anyway. If a machine has window without a lot of junk in it, it's stable. We have used this kind of setup with windows XP and it is stable. I think your real question should be "has anyone done benchmarks on my kind of LV applications in windows vs. linux". Hope this helps.
Try to take over the world!

Display is under Windows XP a lot Brigther

My Macbook Pro (LED) Display is under Windows XP a lot Brigther then in OS X.
When i sitting Outside, i put the Brigthness under OS X to Maximum to see anything, under Windows Xp ist enough 75%. The Display is Calibrated.
Someone know a sulotion to get the same Brithness as in Windows?

Perhaps try turning off "automatically adjust brightness" in the Displays pref pane? I don't know for sure, but I suspect that doesn't affect Windows (if you're running Windows in BootCamp), which might account for the difference.

T3150 Wireless Speakers not pairing under Windows 8.1

Hello,
I previously successfully paired and connected a new Creative T3150 Wireless speaker set via Bluetooth to my Lenovo Yoga 2 Pro + Windows 8.1 PC. But, audio stopped one day (for a reason I have yet to discover). Following some Bluetooth troubleshooting FAQ advice, I removed the device under Windows 8 Bluetooth Devices, hoping to re-add it. But, it has never been able to be discovered again under Windows Bluetooth pairing (even after I recycled power on both speakers and PC). For a test, I am able to still successfully pair and connect to the speakers using my iPhone's Bluetooth (independent of the Windows 8 PC). I am also currently using a Bluetooth Microsoft Surface mouse with the Lenovo successfully, no problems with pairing.
Might have the Creative T3150 drivers accidentally been uninstalled from Windows? If so, don't really know how to recover those.
Any troubleshooting thoughts greatly appreciated...
Thank you!
David Jacobson

Originally Posted by djacobson
Hello,
I previously successfully paired and connected a new Creative T3150 Wireless speaker set via Bluetooth to my Lenovo Yoga 2 Pro + Windows 8.1 PC. But, audio stopped one day (for a reason I have yet to discover). Following some Bluetooth troubleshooting FAQ advice, I removed the device under Windows 8 Bluetooth Devices, hoping to re-add it. But, it has never been able to be discovered again under Windows Bluetooth pairing (even after I recycled power on both speakers and PC). For a test, I am able to still successfully pair and connect to the speakers using my iPhone's Bluetooth (independent of the Windows 8 PC). I am also currently using a Bluetooth Microsoft Surface mouse with the Lenovo successfully, no problems with pairing.
Might have the Creative T3150 drivers accidentally been uninstalled from Windows? If so, don't really know how to recover those.
Any troubleshooting thoughts greatly appreciated...
Thank you!
David Jacobson
Hi David,
Based on your troubleshooting steps, Im assuming that the problem is from your Windows 8.1 unit.
But in order to ensure this, you may want to test your speaker on another laptop/desktop unit with a different OS (EX: Win7) if you have one / can borrow from your colleague.
If the problem is originating from your Lenovo, it may be an case of just updating your Bluetooth driver. Try the link I posted below:
http://malwaretips.com/threads/my-bl...ows-8-1.19729/
Right swipe your desktop, open search, type "device Manager",click the "view" then click "show hidden devices".. Look in the "Bluetooth Virtual Devices" "Human Interface Devices" and "Network Adapters" for any of the bluetooth to have and exclamation mark next to them, may be as simple as a driver not compatible, and usually if you find this and go to the manufacturers website, and go to the drives and download seciton, you may find a recent patch for this.
Here is another website tackling Bluetooth connectivity issues under Win8 PCs:
http://h30434.www3.hp.com/t5/Noteboo...237379#M119718
Cheers!

I tunes 11 freezes under windows 7 64-bit immediately and won´t do anything. Please help

itunes 11 freezes under windows 7 64-bit immediately and won`t do anything. Please help !

The first thing to do is make sure you are using the latest version of iTunes. Look on the Help/Check for updates menu option in iTunes, which will confirm that you have the latest version or enable you to download it.
The effective way to Sync the iPod is to add your songs to iTunes and then connect the iPod to iTunes after you have added your songs.
So if you have been connecting the iPod and then trying to add songs "to the iPod" - don't!
You add the music to iTunes and then sync the iPod with iTunes afterwards.
Next, try connecting the iPod to iTunes, if you get the "duplicate file message", can you post it here (exact wording please)?
Once you have the iPod connected to iTunes, click on the Device that appears on the left of the iTunes window. On the Device/Summary screen, choose (check) Sync only checked songs and videos. Providing the songs still have the check mark on in iTunes (the default when songs are added to iTunes), those songs will Sync with the iPod.
Notice the other options in additiion to Summary. Look on the Podcasts pane for the Sync option (to add Podcasts to your iPod) and also on the Photos pane for options for adding (or not) Photos to your iPod. If you change any of these options, you will need to press the Sync button afterwards for the changes to take effect.
Lastly (for now), you can only Sync the iPod with one iTunes library. If you try and Sync it with a second library on your computer, or with iTunes on another computer, all your previous songs etc will be removed and replaced with the new library.
A thought... could the duplicate file message be because you have two iTunes libraries on your machine?

X230T graphics performance under Windows 8

My Thinkpad originally came with Windows 7 Pro, but I have changed to Windows 8 in order to resolve problems with VSS. OOB, both Windows 7 and Windows 8 gave me a "Desktop graphics performance" rating of 5.7. Under Windows 7, upgrading to the latest Lenovo driver improved this to 6.1, leaving my HDD (at 5.9) as the limiting factor in performance. Under Windows 8, however, replacing the Windows driver with the latest Lenovo driver has reduced "Desktop graphics performance" to 5.6! What gives?
P.S. I just discovered a Power Options advanced power setting "Intel Graphics Power Plan", which was set to "Maximum Battery Life" for both battery and plugged in. I changed it to "Maximum Performance" when plugged in, but the Windows experience Index (WEI) for "Desktop graphics performance" remains a mer 5.8.
X320T running Windows 8 Pro x64

rsbrux wrote:
My Thinkpad originally came with Windows 7 Pro, but I have changed to Windows 8 in order to resolve problems with VSS. OOB, both Windows 7 and Windows 8 gave me a "Desktop graphics performance" rating of 5.7. Under Windows 7, upgrading to the latest Lenovo driver improved this to 6.1, leaving my HDD (at 5.9) as the limiting factor in performance. Under Windows 8, however, replacing the Windows driver with the latest Lenovo driver has reduced "Desktop graphics performance" to 5.6! What gives?
P.S. I just discovered a Power Options advanced power setting "Intel Graphics Power Plan", which was set to "Maximum Battery Life" for both battery and plugged in. I changed it to "Maximum Performance" when plugged in, but the Windows experience Index (WEI) for "Desktop graphics performance" remains a mer 5.8.
After you changed the setting to "Maximum Performance" , did you run the WEI test again?

Premiere Elements 8 under Windows 7: HOW TO DO?

My system is a MICROSTAR (MEDION) Quadcore 6600(think it's made by MSI) with 4GB memory, 2 x 1TB HD Wetern Digital GREEN (replacing the very poor quality Seagates 2 x 500Gig originaly installed) and running Windows 7 64 and 32 Ultimate. The 32 version was installed especially for PE8
Why I didn't stay with PE7?
Strange enough, PE7 worked perfectly under Windows 7 64bit RC and RTM, but with the Official release of Windows 7 32 or 64 Ultimate, it was finished with the Happy Hour, Crash, crash, crash all the time!
So I downloaded from Adobe a official PE8 and started very happily with it.
But it was CRASH & GO all the way !!!
I have send a few messages to Adobe Contact, which deviated me to this forum so I could spit my poison far from their "Ivory Tower" No answers or help from them. PE8 is paid, so go to ...
I found out immediately that I was one of the many people to regret this "Buy of the Year", but since PE7 didn't work and Windows 7 is so good that I don't want to go back to XP or Vista, I had to find a way to make this SH.. work. Luckily the Forum proposed me a few solutions for which I am very grateful.
After a few editing's with DV (about 3hours long), I am having a little bit more experience with this PE8-pre-beta-thing.
First of all I disabled the GPU-thing in the preferences, then I disabled the "Background rendering".
The Medion computer has a "diet" Nvidia Geforce 8600 so there are no 3D drivers to disable, neither has Windows 7 this Windows Defender, so that could also not be the problem.
Anyhow, these few minor changes seem to have solved a lot of crash problems.
Also, NEVER open a PE7 project in PE8 !!!!! It's really not 100% compatible: no way to render previews and crashes guarantied!
Be very careful in applying transitions and video effects, especially if you start cumulating them. Maybe they will work in preview, but you never know if you will be able to render a film or DVD from it.
For example "camera view" + "Soft edge" ( since I have a Dutch version, I don't know if these are the right names) to make a kind of 3D frame around your image. No problem in PE7, but PE8 doesn't digest it! The only way to render this to a film is to import the project in to PrProCS4 and change the other transitions which are not supported by PrPro with similar ones. Or going from New York to Chicago over Mexico City!!
If you take care of these precautions you can work very satisfactory with PE8, without crashing more then was the case with PE7 (low memory problems)
This PE8 should have been written for 64 bit, so it would have suffered much less memory problems, then now.
Some things I like better with PE8, like the ClipArt's, the Menu's and the new Smartmovie themes, which I create and then edit manually.
Automatic backup creates now 5 instead of one file.
What I don't like:
If you capture in scenes, it's still scene 11 coming after scene 109 etc, instead of counting from 001.
With PE7, you could see in which map the project you wanted to open was situated, here not.
Place of the Project changed, without reason, change for the fun of change?
Making "markers" has become more complicated, without improving. Also changed just for the fun of it?
Can still not capture HDV by scenes, for that I have to use Sony Vegas.
Until now I didn't try to edit HDV in PE8, because I don't trust PE8.
What we really need is for Adobe to bring a major update to fix al these annoying misfits and to make a customer's dialog instead of a one way street policy.
If I find new ways to make work easier and without crashing I will not hesitate to let you know.
Until then, hope this can help you a little bit!
Roald

NO, YOU CANNOT !!!!
If your project was started in PE7 and you import that project to PE8, you cannot, I REPEAT, you CANNOT render this files to a preview.
You wil get the render window, but no counter or anything else will move or happen.
Nothing, rien , nada, niets, nichts!!!!!!
At least not here on neither of the 3 installations which I did under 3 different Windows 7 !!!!

Photoshop Elements does not start under Windows Vista

The Twain-Module of my Canon CanoScan FS4000US Filmscanner works only under Windows Vista (no newer OS!). Fortunately I own an older Notebook with Vista as OS, so I have PSE Version 5.0.2 installed and use it to import my old color negatives via the twain module. Fine! It even works with 42 bit. But suddenly, PSE refuses to start and freezes at the window loading the libraries. At this stage it can only be stopped with the help of the task manager. A little search in the internet informs me that I am not the only user with that specific problem. Any help from Adobe?

After a view days of searching a found a solution: I installed the MS Visual C++ Reditributable für Visual Studio 2012 Update 4 (both 32 bit and 64 bit) and now Photoshop Elements runs without any problems.

Running DS-5 armcc compiled code (PIC) under Windows EC 2013

Hi All,
i just wanted to know if it is generally (officially) supported to run code that is compiled via the armcc (5.03) from DS-5 under Windows Embedded Compact 2013. Or if this is discouraged (reasons?).
The problem i have:
The bootloader contains some code that must be run during Windows EC Startup. So this code is loaded from the Flash, copied to RAM (reserved and commited via VirtualAlloc and marked as executable) and then the functions are called via FunctionPointers.
The code is compiled and linked as position independent and the stack base register is set accordingly before any function is called via pointer and reset when it returns.
This works in about 9 out of 10 tests without problems. But sometimes i get all sort of exceptions (Data Abort, Prefetch Abort, Unknown Instruction, ...). Most (if not all) of the time they occur when the position independent code runs on one of the two
cores.
The code runs on an i.MX6DQ (dual).
If i only enable one core, i can't reproduce the problem (i assume that multicore-handling and multithreading in WinEC 2013 Update 10 is really well tested and works without problems, so this can't be the real reason).
I've thoroughly checked and debugged the code, i'm really sure there is no illegal access or other problem with the code itself.
Could it be a problem to call code compiled via DS-5 armcc? I've compared assembler code that Visual Studio/Platform Builder generates with code that DS-5 generates (but i'm no assembler expert). I can't see any obvious special code that is added by Visual
Studio/Platform Builder (i.e. that functions need) that is not there in the DS-5 code.
Best Regards
Sebastian

So I think you could be able to image some code for ROM from another compiler and without knowledge of Windows CE. However, if the code will be called from Windows CE, this becomes more difficult requiring very careful isolation from the
MMU state, processor state, kernel/user mode, etc. Code that works great when called from the bootloader might not work at all from Windows CE itself. The main problem with mixing code from different compilers is the object file format and conventions for
entry and public names. Very unlikely that you'd be able to "link" code from any other compiler with PB-compiled code.
You might think about the x86 image which can easily call BIOS from the bootloader but which can't even begin to call BIOS from CE itself. The problem isn't the compiler (which is different), but the operating environment differences and assumptions.
Paul T.

JavaSoundRenderer now running under Windows

Hello,
I found out that the JavaSoundRenderer could run under Windows but only if you use Java 6.0 Beta.
So if you've problems of playing audio in Windows then just install the new Java (6.0) and it will work.
best regards,
thomas

Hi,
Refer [SAP Note:1337708 - Crystal Reports support of 64 bit Operating Systems|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333333333337333733303338%7D.do] and also have a look at
[SAP Note:122050-An error has occurred while attempting to load crystal reports on 64bit|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233323330333533303331%7D.do] might be helpful

Calenders hidden under Windows pane

Similar Messages

Maybe you are looking for