Calibrate Sony SDM-HS95P with DVI-D

I just hooked up these 2 montitors, and the colors are pretty bad. Sony says that with the DVI-D interface there is no way to calibrate on screen, and the monitors have no calibration buttons. I tried to use the Mac calibrate, but it simpley says "turn up the contrast on your monitor", well, there is no way to do this Sony says.... So, I am either missing something, or I guess I am looking to purchase a calibration program. Can someone guide me? Thanks in advance.
Power Mac G5 Mac OS X (10.4.4) 2.3 GHz, 8GB RAM, Dual Sony SDM-HS95

Here is what Apple has to offer as trouble shooting measures in cases like this. See if it helps.
http://docs.info.apple.com/article.html?artnum=301345

Similar Messages

Mac Mini Compatible with Sony SDM-HX93/B 19" Monitor?

Hello,
I am researching the Mac Mini and am curious if it is compatible with the
Sony SDM-HX93/B 19" monitor. Any help is greatly appreciated.
Thanks!

Hello!
The Mac mini is compatible with any monitor with a DVI or VGA input.
The mini comes packed with a Mini-DVI to DVI adapter. You can also get a Mini-DVI to VGA adapter, I'm pretty sure.

I am trying to hook my macbook pro to a sony bravia TV via DVI to HDMI cable and the TV will not recognize the signal. The same set up has worked with three other, though different televisions. Any thoughts?

I am trying to hook my MacBook Pro to a Sony Bravia TV via DVI to HDMI cable and the TV will not recognize the signal. I have used the same setup with three other TV's, each a different brand with no problem. Any ideas?

Is the TV set to take input from the HDMI connection?
On your computer, if you open the Displays preferences and do not see an Arrangement tab (or there is an Arrangement tab that shows only a single monitor) then there is something physically wrong with your connection. Try clicking Detect Displays just to see if the computer can now sense the presence of the connection. Check your connections.
If you do have an Arrangement tab, and it shows two screens, then click Gather Windows to bring the TV's Displays preferences on to your main screen if the TV is not yet showing an image. Set the proper resolution (probably 720p, 1080i, or 1080p). Set the refresh rate (probably 60Hz) if that preference is shown. You should see a picture at this point. I recommend turning off mirrored displays if it is enabled.

Not able to pair my sony DR-BTN200 with iPhone 5S

not able to pair my sony DR-BTN200 with iPhone 5S

Hello rammail2u.
Greetings and thank you for your message, in order to connect and pair both devices via bluetooth follow the next steps:
1. Place the Bluetooth device within 1 meter (3 feet)
2. Press and hold the POWER button for more than 30 seconds while the unit is off.
3. Make sure that the indicator flashes in blue and red alternately after you release the button.
4. Perform the pairing procedure on the Bluetooth device to detect the headphones by going to the bluetooth settings of your Iphone 5s.
5. When the list of detected devices appears on the display, select the model DR-BTN200 to make the connection.
6. If a passkey input is required on the display of a Bluetooth device, try using “0000” as reference.
NOTE: Every time you want to pair the devices don't forget to press and hold the power button until a blue indicator flashes on the set. The blue indicator means that the headphones are ready to be paired with an external device, also tells you that the bluetooth function is already on.
If my post answers your question, please mark it as "Accept as Solution."

How to connect my Mac Air 13" to my Philips display with DVI and VGA ports?

How to connect my Mac Air 13" to my Philips display with DVI and VGA ports?

Use a DVI to micro-DVI adapter if you're on an original MacBook Air, and a Mini DisplayPort adapter for a newer one.
(119682)

How can I connect a laptop with DVI to an Apple LED Cinema Display 27"

I have an old Mac Book Pro 2007 and a PC laptop, both with DVI.
I simply can't find a DVI to mini display adapter.
Can this be true?

Be careful. Make sure your laptop's DVI output is a dual-link DVI output. Otherwise it won't work correctly with the 27" through any adapter.

How do you connect your macbook pro to a sony bravia tv with a belkin cord????? HELP!!!!!!!!!!!!!!!

How do you connect you macbook pro to a Sony Bravia tv with a Belkin cord!?!?!?!?!?!?!? We know how to set it up, but what setting do you put your tv on!?!?!? we have tried everything, but it wont work!!!!!!!!! HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Well, I have connected my mbpr directly to a Sony Bravia using an hdmi cable, then set the tv to use the corresponding input port, and it works just fine. Have also connected via airplay -> appletv -> tv (with the last connection via an hdmi cable), which also works fine.

Clear enclosure 23" cinema display with DVi connector?

Hi all,
I went to a local Mac store (Not Apple) where I was shown a supposedly 23" HD cinema display (clear enclosure) with a DVI CONNECTOR directly built in. I was under the impression that all clear enclosure versions natively came with the ADC connector and that if DVI was warranted, a converted was necessary. To my surprise, Apple apparently made two clear enclosure versions, both ADC and DVI. I've verified under the spec. area of this site. But, there were no 23" clear enclosure with DVI, except of course, the current 23 version which is the aluminum. So, was the more likely scenario that this rep. had shown me a 22 with DVI or is there really a 23 version with DVI. I was convinced at the time myself that it was a 23 clear enclosure version with a DVI connector. I saw with my own eyes that this display did not have a converter connected and it looked like the 23 as opposed to a 22. The 22 & 23 looks so similar and can be mistaken for each other. One of the ways of identifying readily is that the 22 has the power/brightness controls near the bottom right of the casing. Could someone confirm either way. Thanks!

Hi-
I agree that the rep probably showed you a 22" DVI model. See page 8 of the 22" Cinema Display Manual for the cabling of the display.
You will see the DVI version of the Cinema Display listed in this article. The article was put out prior to the Aluminum housed ACD release.

Apple Cinema Display with DVI to VGA graphic adapter... HELP

A friend of mine has a PC (Windows XP based) and is using the Apple Cinema Display. Since his graphic card has both vga and dvi slot, he can plug the monitor to DVI and got it working, but when he tried to plug it into the VGA slot using DVI to VGA converter, it did not work. Is there a need of special converter or adapter?

Hi royz86,
To run a DVI display off a VGA output, you need a rather expensive converter box. These converters vary in performance, reliablility and application possibilities and certainly don't compare with using a native DVI output.
Your friend was probably trying to use a DVI to VGA adaptor (which won't work "the other way around"). It works by grabbing the analogue signal that is included in a DVI-I output and setting up a VGA output that way. These don't work with DVI-D outputs, by the way.
Cheers!
Karl

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

Can I use a 2009 iMac as external display for 2007 macbook pro with DVI port only

I have a late 2009 imac with minidisplay port and a 2007 macbook pro with DVI port. I connected a mini diaplay port to DVI cable but all I get on the imac is a blank screen when I press F2. Can I use the imac this way?

I'm not sure if it works with DVI but your late 2009 must be a 27". Try Command-F2 or Copmmand-Fn-F2

Z97M GAMING no hdmi signal with DVI converter

My monitor has VGA/DVI only (Samsung SyncMaster 213T), I have a HDMI to DVI converter in the DVI port, this works with the HDMI out from my laptop.
Am putting together a Z97M/4790K rig. I get no signal at the monitor from the Z97M's HDMI out, if I connect it to a TV I do get a signal.
Am using the same (short) HDMI cable and adaptor with both the laptop and the new Z79M, used the same cable to connect the Z79M to the TV.
So the cable and converter are good (they work with the laptop) and the Z79M HDMI port and cable are good with the TV.
Anyone have any idea why the Z97M HDMI output wont display on my monitor? (Any bios settings to make the HDMI signal more compatable?)

Yes, to be clear, there is no GPU. When I say the Z97M's HDMI out I mean the output from the Z97M motherboard. I have tried it with a second screen, the TV (it worked).
Logically one of two things must be happening... either the Z97M's HDMI signal isn't making it through the DVI/HDMI adaptor (when the laptop's signal is), or the monitor cannot process the Z97M's HDMI signal (when it can process the laptop's).
HDMI and DVI signals are the same, so the adaptor is just a plug converter ('square plug in round hole') and unlikely to be the issue, especially as it works with the laptop.
But both the monitor and laptop (which work together with HDMI and the DVI converter) are >5 years old. The Z97M is very new and could be it's HDMI output just isn't compatable in some way with the (relatively) old monitor.
Hence am wondering (for example) if there are any Z97M bios settings which might make it talk nicely to the old monitor.
Be interested to hear if anyone has had issues (or even success!) using the HDMI out with DVI monitors, especially old Samsung SyncMasters ?

No Native Res with DVI/HDMI but OK with DVI/VGA cable on Loewe 32" LCD

Hi there, I am a little confused about connecting my mini to my Loewe Individual LCD TV and coudl do with some help.
I purchased a DVI to HDMI cable at enormous cost because my experience of DVI versus VGA is like night and day and I wanted to have the best possible connection to my HD TV.
The problem is that when I connect the mini with the DVI/HDMI cable the native resolution of my TV is not available. (1366x768 or thereabouts) The only resolutions to choose from are 1920 x 1080? and 1024 X 768. Using overscan on the 1024 fills the screen correctly but looks all stretched.
Instead I connected with a VGA cable and the correct resolution is automatically detected immediately and there is no problem at all.
I am a little bit confused as to why it works fine with VGA but not with DVI/HDMI. The VGA connection looks OK but why compromise when you shoudln't have to?

First of all, I am far from an expert but as I said, from my experience and after reading a LOT, HDMI cannot support 1366x768, that is why the TV goes without picture if you try. Why? I don't know.
Now, DVI is almost like VGA, both are analog, and can support 1366x768 or 1920x1200. But since you go from DVI output from the Mac Mini to the HDMI cable, screen goes black, blue, etc, res no supported.
That is why some people don't have problems with the powerbook and their HDTV's, and then they try with the DVI-HDMI adaptor (normally with the mac mini) and it's no good.
The thing is, you can get 720p, 1280x720 but with overscan, so with DisplayconfigX you go from:
1280x720 (720p)
128 Front Porch 10
80 Sync 5
200 Back Porch 15
1688 Total 750
to
1240x680
128 Front Porch 19
80 Sync 5
240 Back Porch 38
1688 Total 750
for example, with this setup you get the image cut to a minimum.
As you can see the totals are in both cases 1688 750. As soon as you don't respect this totals, like in this example:
1366x768
28 Front Porch 5
80 Sync 5
40 Back Porch 15
1514 Total 793
your TV won't be able to dispay the image. But with VGA the totals don't matter!!!!, that is why it works with one cable and not with the other.
Apple should update the Intel graphic card drivers, maybe that would help.
Bye
Mac Mini Mac OS X (10.4.5)

Cant use DVI-D port with DVI-D cable from Pav 500-100a to HP W2207 monitor

I have a new Pav 500-100a factory standard with no mods. A HP w2207 monitor.
Currently connect fine with VGA to the DVI-D port with the adapter that came with the pc. I've setup Windows, updated to 8.1, put in my files from my old PC and all was well except video isnt that good.
I got a DVD cable form work but its a DVI-I cable. It took 5 mins before windows comes up and then whenever the background picture changed in the theme it hung for a few seconds. I read that I need a DVD-D cable which i purchasd today.
The packet says its a CL-DVI2M - DVI M/M 24+1 CABLE 2M. The tech in the shop says its a good calbe and will work fine.
When connected and I power up I get teh hp logo and rolling dots then it goes blank.
I reconnect teh VGA cable and its all fine - using the VGA to DVI adapter.
I ran msconfig and turned of safe boot - restarts and comes up fine in safe mode. I set the resolution to 1280x800 and restarted and reconnected the DVI cable - blank again.
If I put the VGA cable back in it boots fine. The monitor has been factory reset and seens the DVI connection but Windows remains blank. Also tried booting first with no cable - connect teh DVI and the monitor remains in sleep - power reset teh monitor and still blank also shows no DVO conenction.
I fI power up with DVI connected I can get to BIOS, and i see the HP logo and dots as Win 8 starts.
I dont know what else I can try. I have no other usable video card with DVI
Any ideas out there?
Pls help - Steve
Although I am an HP employee, I am speaking for myself and not for HP.
This question was solved.
View Solution.

Hi Steve,
Only connect one active video cable to the monitor and do not use any adapters.
Use a flashlight and examine the DVI connector on the monitor. Which DVI type is it?
Some of the older HP monitors have DVI issues so you might want to check with HP Support and see if you have one of those models.
An older post a long time back indicated that audio also had to be feed to the monitor (claimed by a poster). If this is indeed true then it's a monitor design flaw. So, you could use a native HDMI cable and test out that claim.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

How can i download video hdv minicassette footage from my sony video camera with no fire wire port?

How can I download video HDV minicassette footage from my sony video camera with no fire wire port?

Hi,
Are you talking about your computer which has no firewire port ? If YES you can have one of two options:
(a) Use FCI - Firewire card like this (preferred)
You can buy from this:
http://www.ebay.com.au/itm/2-Ports-PCI-Express-PCI-E-IEEE-1394A-Firewire-Adapter-Cable-Card-/1507023...
(b) You can also use USB-Firewaire adapter like this:
http://compare.ebay.com.au/like/120580625092?ltyp=AllFixedPriceItemTypes
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Calibrate Sony SDM-HS95P with DVI-D

Similar Messages

Maybe you are looking for