Calibrate two sensors for one runner and one iPod?

in my quest to find a way to get an accurate reading for flat runs versus my hilly-course runs, I bought a second Nike+ Sport-Kit. I calibrated the new Sensor#2 on the gradually rising course, leaving the Sensor#1 calibrated to the flatter courses and (I thought) also stored.
When I switched back to Shoe Sensor#1, lo and behold, the calibration from Sensor#2 remained.
So, I then calibrated the flat course for sensor #1.
But the next day when I switched to Sensor #2, then the one and only calibration was from Sensor #1 and was totally inaccurate for the hilly course
Is there then any way to have one runner, using one iPod and two sensors, to have calibration runs retained and used and identified WITH the respective sensor?

schmjorgen wrote:
but can i then only ever use both the iphone and itouch with that particular mac?
you can use home sharing to transfer media files (incl. apps) between the two Macs. if you and your wife use separate Apple ID's to purchase content, authorize the wife's machine for yours and yours for hers.
is there a way to make both portable devices work with both macs?
by design, iOS devices sync with only one library at a time.
i am hoping the "home sharing" feature will be the answer but so far i have not been able to make it work.
these links may prove helpful:
Setting up Home Sharing on your computer
Troubleshooting Home Sharing

Similar Messages

Can I have two accounts for one IPod touch?

I have two homes, two computers (one in each home), and one IPod touch. I already have an account set up on one computer in the one home. I have a second home that I'm at about one week per month. I just want to be able to buy itunes at the second home and download them also to my one IPod. In other words I want to be able to get ITunes from two computers to the just one IPod. Is that possible? My son doesn't think I so.

If you want to connect and use an iPod on more than one computer you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply. In this mode you can drag and drop whatever you want to the iPod from either library. You can also authorise each computer to use songs purchased from the same iTunes Store account:
Using iPod with Multiple computers
Managing content manually on iPod
Syncing Music to iPod
About iTunes Music Store Authorisation and Deauthorisation

Two prices for one material in sales order according condition type

Hi,
I configure the condition type according to following condition record:
Plant/ Sales Organization/ Distribution channel/ Material / Customer
(because system should calculate two prices for one material in two plants)
In the sales order screen, when user firstly select material , quantity, plant , system calculate the related price correctly but if user select the material and quantity and enter and after that select the plant, system will show the error message in pricing procedure and to have a price for material, user should update the price in the price condition in sales order.
It is so difficult for user to update one by one, because there are several sales orders which need to update.
Is it any way to solve this problem?
Thanks,

> In the sales order screen, when user firstly select material , quantity, plant , system calculate the related price correctly but if user select the material and quantity and enter and after that select the plant, system will show the error message in pricing
Hi,
Why to let the user press Enter button before entering plant value Obviously, system will give error, because it doesnt get all the required value based on which you have maintained condition records.
Ask the user to enter all the value at item level otherwise you will have go for the option that you are doing currently.
It is said prevention is better than cure
Hope you get some inputs
regards,
Sagar

Two address for one company code

Hi SAPians,
I have a doubt in maintaining company address for Invoice output!
Is it possible to maintain two Address for one company code?
Like if XYZ company code and say it has has two customers AB and CD.
Then if i want to maintain Company address on print layout for invoice Different to each. how can i achieve it.
If yes, please through light on it.
Regards,
Romesh

Hi ,
As far i know it is not possible to have two different address for the same company code.As table can hold only single unique data.
As far as the above answer is concerned, we use International version fo Customers not for Company Codes.
Hope it helps.
Thanks and Regards
Rohit.

Fetch New Data shows two entries for one account

I have on a variety of accounts on my iPhone and my iPad: an iCloud, an Exchange, a IMAP, and a couple of Gmail accounts.
Earlier this week, I noticed that in the "Fetch New Data" setting (Settings > Mail, Contacts, Calendar > Fetch New Data), there are TWO entries for one of the Gmail accounts.
One entry lists "Mail and Calendars." I use this for this particular Gmail account. I have these selected in the "Accounts" section of Settings > Mail, Contacts, Calendar.
The other entry lists "Contacts and Calendars." I don't sync Contacts, but I do sync Calendars. Why is it listed twice?
I tried deleting
the offending Gmail account, but it did not delete the duplicate entries.
erasing all settings
all of my accounts, including iCloud, IMAP, and other accounts.
The ghost account is still there, fetching calendars and contacts.
Has anyone else seen this behavior?
I considered erasing settings and content, but that seems pretty extreme for something that might not be that big of an issue.

Exact same problem here!!! Iphone 5s with IOS 7.0.3, using Gmail among other email providers.
So it is definately a bug - the "fetch new data ghost account". I hope it will be solved in a newer release. In the meantime, I switched the ghost account to "manual" so it shouldn't interfere...

Two billing for one sales order for same customer

Dear All ,
I have a requirement of posting a two billings for one sales order.
One is for Sales and another is for commission...
Entry could be
Sales Entry - Db Customer
Cr Sales
Commission entry could be
Db - Cusomter
Cr- Sales commission income account (P/L)
We are having third party sales scenario , In this case billing is MIRO dependent.
Once the miro is done then only billing is possible ...
Could you please advise on that ..
Regards,
Sukh

Dear Ratish,
Thanks for yr reply.
I already did that but it is not serving business purpose.
Comm payment - comes diff time than sales payment.
so ,I will post one entry customer will get hit with total amount Sales + commission
like below
Let say 10, 000 is the sales value and 500 is the commission
So , This entry will get posted
Customer Db- 10,500
Sales Cr- 10,000
Comm Income Cr- 500
But, As I said sales amt will be paid before so We need to clear it partially and some time customer pays also diff amount due to some defect.
So, We wont be knowing for which case we have or havnet received the payment against commission.
As , Customer account is got hit with total amount( Sales+ Comm..value).
Pls advise how to solve this.
Regards,
Sukh

Two sids for One instance

Hi All,
I have to create two sids for one database. I am using Oracle 9i on Windows machine as well as linux machine. Is there any possible to assign two sid's for one database.
Give me the suggestions...
Cheers,
Moorthy.GS

I think you need to define your term 'database' here
In Oracle world, database is usually referred to as instance.
a SID is one database instance, that's why, people will tell you that you can't have two SID for one database (instance)
However, if your 'database' means the schema and data, then yes, you can run two instances (with two SID of course) to host the same schema and data.

LMS 4.2 - Two notifications for one alarm.

Currently when a device, say a router goes offline we receive two Active 'Unresponsive' alarms for the router and then when it comes back online we receive two Cleared 'Unresponsive' alarms. All have their own unique Event ID. (shown below)
I was wondering if anyone could help me to config LMS to send only one Active 'Unresponsive' notification when a device is offline and then one Cleared 'Unresponsive' when the device is back online.
Here's an example of the Active 'Unresponsive' alarms I receive when I power the router off:
Notification 1
EVENT ID               = 0002BI5
TIME                   = Thu 29-Nov-2012 15:26:32 EST
STATUS                 = Active
SEVERITY               = Critical
MANAGED OBJECT         = router.domain
MANAGED OBJECT TYPE     = Routers
EVENT DESCRIPTION       = Unresponsive::Component=172.16.1.254 [router.domain];ComponentClass=IP;ComponentEventCode=1098;InterfaceType=ETHERNETCSMACD;InterfaceMode=NORMAL;InterfaceAdminStatus=UP;Address=172.16.1.254;IPStatus=TIMEDOUT;InterfaceOperStatus=UP;Ne
CUSTOMER IDENTIFICATION = COMMS TEAM
CUSTOMER REVISION       = 1
NOTIFICATION ORIGINATOR = Fault Management Module
Notification 2
EVENT ID               = 0002BI6
TIME                   = Thu 29-Nov-2012 15:26:57 EST
STATUS                 = Active
SEVERITY               = Critical
MANAGED OBJECT         = router.domain
MANAGED OBJECT TYPE     = Routers
EVENT DESCRIPTION       = Unresponsive::Component=router.domain;ComponentClass=Router;ComponentEventCode=1101;SystemObjectID=.1.3.6.1.4.1.9.1.569;Description=Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(15)T13, RELEASE SOFTWARE (
CUSTOMER IDENTIFICATION = COMMS TEAM
CUSTOMER REVISION       = 1
NOTIFICATION ORIGINATOR = Fault Management Module
Any suggestions?

Am I alone with this issue of receiving two notifications for one Unreachable event?

How to create two respone for one request

Hi
is there any way for us to create two response for one request
the scenario is as below
1. user click on update button for particular record in the datatable (
after its get updated and status get updated = 'UPDATED' it will remove the object from ObjectListDataProvider and clear the tablePhaseListener ).
2. After it gets updated successfuly , i want to prompt the user with generateExcel function which using response.getOutputStream() using Apache POI.
How can we combine 1 and 2 together
Here what i have tried and didnt work
1. i tried to put the generateExcel function in destroy() method after page is rendered but it gives me Exception
2. i tried to put the generateExcel function in prerender() method
but the page will only execute the generateExcel function
- the data still get updated to the database but it doesnt refresh the page ( i meant the removing object and tablephaseListener.clear() doesnt work )
3 . i tried to put generateExcel Function after it process the data
public String updateData()
       //update data
       if(success){
            // prompt user to save excell sheet
        return null;
     }This one also doesnt work and gives the same behaviour as number 2
The Prompt to save excel sheet still gets popped up
but the page just doesnt get refreshed
Thanks
is anybody know the workaround?

yea i did set some alert message and clear the table by calling
provider.removeRow and commitChanges
it just doesnt reflected in the page that we see
by actually is already removing the row from the provider
Thanks

Two invoices for one sales order

I want to create two invoices for one sales order
Scenario is like to create sales order for value of 100 $, and I want to send order reference billing after saving the sales order for 10% of order amount
I would say 10% of 100 $
And after delivery I want to issue a invoice for 90 %( rest of the amount) which is delivery relevant invoice.
Both invoices will be relevant of accounting.
Would any body suggest this, how it would be mapped it in to SAP.

Hi Suresh,
It is possible in Partial billing. Maintain the Billing plan and create a plan with the inputs as u specified.
Go to IMG-SD-Billing-Billing plan. Do ur own configuration for Billing plan.
Now in Sales document creation mode....header details-Billing plan, U block the billing schedules and as per ur requirement , remove the billing block and create billing document.
If u configured Account detrmination procedure, U wld get the accounting document wrt billing document.
Hope this wld help U.
Regards,
Praveen

Can we create two Filters for one cube

Hi all,
I created two filters for one cube (in 11v), I assigned this filters to one user in shared services , so which filter work,
I think ,We have to assign only one filter for one user , please i need clarification....
Thanks
Edited by: user98631 on 12 mars 2010 05:13

You can create many filters for one cube. I usually associate one group per filter and a user can have one or more groups assigned to them. Can't remember what happens when a user has access to conflicting filters (i.e. the order of preference). It is in the DBAG I am sure though.

Two titles for one screen

Hi Everyone,
Is it possible to give two titles for one dialog screen.
Based on a grid i perform centain things where the user has to enter the values in the dialog screen.
To this screen i want to title based on the which grid it is. Is it possible to do.
Can anyone help me on this.
Thanks,
Prabs.

when you define the title bar (to be used with set title bar)
enter the text with place holders like below.
& & my &
later in your program you can supply text for & using set title bar.
set titlebar 'MYTITLE' with 'This' 'is' 'test' .
This would produce title bar as
This is my test
set titlebar 'MYTITLE' with 'Where' 'is' 'Title' .
This would produce title bar as
Where is my Title.
Hope this is clear.
Regards
Raja

I have too much music for one ipod. What's the easiest way to sync half of my library on to one ipod and the other half to another?

I have too much music for one ipod. What's the easiest way to sync half of you library on to one ipod and the other half on to another?

Make playlists and choose whatever playlists you want to sync

TS1424 Hello! Tell me, why I paid two times for one game? Stray Souls: Dollhouse Story - Collector's Edition HD, Collector's Edition???

Hello! Tell me, why I paid two times for one game? Stray Souls: Dollhouse Story - Collector's Edition HD, Collector's Edition???

Check your purchase history. The second charge may be for unlocking someting in the game or might be in-game items.

My button doesn't work, and I have two scratches on the bottom, and my iPod won't turn on also I have no more warranty\

My button doesn't work, and I have two scratches on the bottom, and my iPod won't turn on also I have no more warranty

Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem besides the button and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Calibrate two sensors for one runner and one iPod?

Similar Messages

Maybe you are looking for