Calibrating two monitors

Hi, I have a Mac Pro 2 x 2.8 intel and I am running a Dell WFP 3008 and a Dell WFP 2407 dual display, can anyone let me know how I calibrate both monitors, I use a gretag macbeth eye one calibration device.
Thanks.
Jason

Calibrating two monitors of different models, or worse, different brands, is really difficult. The colors and/or contrast don't match well, even after calibrating both and creating separate profiles. I used to have two monitors, a Sony F400 19" CRT, and a Dell/Sony 17" CRT. The F400 had truer colors, while the Dell/Sony always looked warmer (redder), and a bit ore contrasty. I used a GretagMacbeth Eye One Display (first version). I now use Color Munki and a single Dell 2408WFP, so I'm not sure if this still hold true if I had monitors of different model or brand.

Similar Messages

M92p HELP!!! About to return 6 new M92p due to Problems with two monitors.

Hope someone can help. Just unpacked last week six (6) brand new M92p with dual 24" monitors. Unfortunatelly the monitors are NOT from Lenovo since Lenovo does not sell color calibrated monitors.
The problem we are having is that we have tried connecting the two monitors using different conbinations of the 3 or 4 available video connectors on the back of the machine.
only ONE monitor works at 1920x1200, the other defaults to 640x480.
All the machines have a video card with 2GB. The video card has a DVI and a VGA port. The motherboard has VGA and DisplayPort. We tried one cable to DVI on video card the other on VGAon video card. Then we tried One cable on video card another on motherboard.
I also disable the motherboard video in BIOS; that did not work either.
NOTHING works!!! I am about to repack all these equipment and send them back.
If anyone has any solution to this issue, please let me know.
Thanks!

Possible driver issue. Have you run Windows Update and Lenovo System Update?
Also, beware of the BIOS settings for multi-monitor: http://support.lenovo.com/en_NL/downloads/detail.page?DocID=HT062228

Which of the two monitors do you recommend for Adobe Photoshop Lightroom 5: EIZO CG 277 Coloredge o

HI,
Which of the two monitors do you recommend for Adobe Photoshop Lightroom 5:
EIZO CG 277 Coloredge or NEC PA-272W.
Thanks in advance for your reply.

It depends on where you are. Things are very different in Europe (Italy?) compared to the US situation.
The price difference between comparable NEC/Eizo models in Europe actually goes in Eizo's favor. The regular NEC PA272 in Europe cannot be hardware calibrated (it has a firmware lock) and the comparable offering would be either the NEC Spectraview 272 or the Spectraview Reference 272. These are more expensive than the Eizo CG277.
Note that the European PA272 can be hardware calibrated with the US Spectraview II software - but that software cannot be bought in Europe and has to be imported from the US.
All these displays are top reference quality. As for calibration software, which is a very important part in the equation, my vote goes to Eizo's ColorNavigator (I have a CG246). It is a superb piece of well thought-out software. The US Spectraview II - which I also happen to have - is a very, very close second, but the European Spectraview Profiler software that you get with the EU NEC units isn't all that impressive.
Photoshop supports a 10 bit display pipeline, with either display, as long as you have a video card that also supports it. Lightroom doesn't support it.

How to connect two monitors using macbook pro?

Hi,
I have a Macbook Pro through which I want to extend the displays to two individual monitors.
The two monitors should show two different windows which is opened through my macbook.
I have observed that macbook has only one mini display port through which I connect to HDMI or to DVI ports in monitor.
So how do I connect another monitor source to my macbook, which ports can help in this situation?
The monitors I have which can supports HDMI,DVI,VGA and DP ports.
Could anyone help me on this issue.
Thanks.

You can use a USB 2.0/3.0 to HDMI/DVI interface. You might also consder Thundebolt to HDMI/DVI.
The MBP 13" will support three screens (two external) and the MBP 15" will support four screen (three external).

Best Way to Hook-up Two Monitors - an LCD and CRT.

I have two monitors, a Samsung SyncMaster 940BX LCD with DVI and VGA ports, the other a Viewsonic CRT with VGA port that I use as a palette monitor.
Which is the best (most reliable) port on the Mac Mini to use for a VGA monitor, the Mini-DVI Port or the Mini DisplayPort? I have a Mini-DVI Port to VGA adapter from my PowerBook that I can use if needed, and will order whatever Mini DisplayPort adapter that I may need. Thanks.

I would think that starting from DVI would be the better choice for running a VGA display. I say this because analog VGA output is part of the DVI standard, so it is accounted for, should be mature technology and should work.
DisplayPort, on the other hand, does not account for any VGA output. It is a strictly digital standard. Apple has created an adapter that has active electronics inside that uses digital signals for input and does a digital to VGA translation within the confines of the adapter. Strange but true.
From reading these forums over the years, one thing I have learned is there is no such thing as a sure thing. Some people report better results from the DVI port when running VGA and others say they could only get their VGA display to work from DisplayPort. So it seems it can depend on the display, too. In that case, you are probably stuck using trial and error to see what will work best for your setup because it's unlikely anyone else is going to have exactly the same two monitors you do.

HT5019 How do I get extended display mode on two monitors off a MB?

I've tried to find answers on other threads but no luck. Is it possible to connect two monitors to a 2008 unibody MB (mavericks) to use extended display? I've never had a problem with using one monitor (mini dvi to vga) as an extended display and now I'd like to add a second monitor via a vga splitter. I thought upgrading to mavericks would solve this but no luck. It's only letting me mirror displays. The "arrangement" option in display prefs not available. Any help would be greatly appreciated. I never for one second thought this would be so complicated.

Exactly what Bob Levine said. Can confirm, running a two monitor display here.

I cant get two monitors to work on one pc.

Does anyone know why i cant get two monitors working on one pc?
I have a HP P6 2000 UKM computer, running windows 7 and it has a DVI D socket as well as the standard VGA (which i am using for my primary monitor) I have got the right DVI to VGA adaptor and have followed various instructions to set up duel disply but every tutorial i have seen says use the multiple display option, but the option dropdown box is not there!
Iv'e tried two different monitors but he same problem. If my graphics card does not suport 2 monitors then why is there a DVI D socket?
Have never had this problem in the past!
Please help.
Nobby

Hi,
Please post the exact HP product number for your PC.
VGA is analog and DVI-D is digital. If you have two monitors then one of them needs to support a digital video signal if you want to use two monitors
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

How can i use two monitors in my application?

Hello,
Background
I have a dual monitor card and two monitors which I want to use in my LabView application. The application gathers data from a complex sensor and calculates a number of results which need to be displayed graphically, this happens every 10 seconds or so. There is an awful lot of graphs which may be needed to be seen at some time but not routinely. The idea is that one monitor will display all the standard routinely displayed things and will not have any user input whilst the second monitor will display a tab control which has all the other graphs pickable.
Question
What I want to know is how I can programmatically tell labVIEW to put one vi up in one monitor and another vi in the other. I would then have them both maximised (which I know how to do). I would rather have the monitors set up as individual and that way I could keep the windows control bar on one monitor only. Thus one monitor would be a true user interface and the other simply a display.
Basically how do I tell LabVIEW to use one monitor for a specific vi and not the other.
The card I have is a matrox p650. Any comments would be appreciated.
Regards
Kevin

Hallo,
with new version of LV its more easy, but it also hasn't any troubles with LabVIEW 6.x or 7.x.
Especially with Matrox P650 you will get no any problems (we using
exactly this card together with G550 and our application supported
three monitors at the same time.).
I recommend to you following sequence:
- After installing driver turn on option for supporting different
resoluton on different monitors. As result you will get two absolutely
separate monitors.
- In Windows define which one is primary and which one is secondary.
(On primary monitor located taskbar and all messages dialog boxes will
appear.).
- Arrange secondary monitor in display properties - where he located (left from primary, or right)
- In your VI (which must appear on second monitor) use
FrontPanel.PanelBounds Property Node for positioning. You must set four
values for two corners. Easiest way to found right values is following:
read this property node in while loop and put indicator on front panel.
Then run VI, drag front panel onto second monitor and resize if
necessary, and then you will see right values for PanelBounds. You can
write this property node programmatically in run-time too.
hope it help,
good luck.

How to run two programs with one PC and two monitors

Good Morning,
I have a requirement to run a parallel loop and update the progress in two monitors with one computer.
For ex: its a two test stage, the process and progress of the 1st stage needs to displayed in monitor1 and similarly for 2nd stage to monitor 2 with program running with one computer.Would it be possible to do that.
Thanks in advance

Hi Parker,
yes, it's possible. You also have properties to set windows to specific monitors...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Can I connect two monitors to a Mac Mini?

Can I connect two Monitors to a mac mini

Yes, but how depends on what model of Mini and what kind of monitors. Early models only had one monitor port. Later models had a Mini-DVI port and a Mini-Displayport. Current models have a Mini-Displayport and a HDMI port. The Mini-DVI and Mini-Displayport can attach VGA or DVI monitors, whereas the HDMI port can't use VGA monitors.
Beyond that, you can get Matrox's DualHead2Go or a USB->VGA or USB->DVI adapter. The Matrox product is a bit expensive and the USB adapters are a bit to slow for games and such. So, again, the answer is "yes", but with limitations

How do I connect two monitors to my macbook pro?

How do I connect two monitors to my macbook pro? This question applies to both DVI and VGA, as I might have to work with multiple sets of monitors.

The MacBookPro only has enough horsepower in the video card for one external monitor.
If you want two or more, you need a MacPro.
Or a MacBook Pro and a Remote Desktop controlled MacMini.
http://www.apple.com/remotedesktop/

I want to set up two monitors but be able to view different programs on each one how do i do that

i have two monitors hooked up to my desktop but want to view different programs on each one how do i do it

Chipper, welcome to the forum.
When requesting help, you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

How do I get InDesign to open on the second monitor of a two-monitor system?

My computer is connected to two identical monitors. I use them in extended mode. Monitor 1 includes my WIndows desktop; Monitor 2 does not
I want to open my InDesign files on "Monitor 2" which does NOT have impediments like a taskbar that wants to pop up.
By default, InDesign CS6 opens on Monitor 1, the one with the desktop. How do I change that setting?

Exactly what Bob Levine said. Can confirm, running a two monitor display here.

How do I get LR to open on the secondary monitor in a two monitor iMac Retina system using Yosemite?

No matter what settings I use in Mission Control or in TotalSpaces2, LR (latest version) keeps opening on the main screen and I have to move it to the secondary monitor each time I restart it or change catalogs. It is irritating but also problematic in that LR seems to get lost on occasion when I use the main monitor for full sized images and will seemingly randomly put the full frame image on top of the main LR grid and control screens (on the secondary monitor) which forces me to close LR to get back to normal. So far I haven't been able to figure out any sequence that causes this to happen but there probably is one.
I have:
1. Tried with the possible combinations of "Displays have separate spaces" and Spaces assignments available by right clicking the program's icon in the Dock.
2. Lowering the position of the secondary monitor in Display Arrangements (a strange suggestion via the Internet)
3. Very politely asking LR to behave like all of the other programs.
Any suggestions.

Exactly what Bob Levine said. Can confirm, running a two monitor display here.

Ps CS5 e Ps CS6 in Mavericks: (Two monitor)

Hello. Sorry for my bad English!!!
This is my great problem: After installation of Maverick on my MacPro Early 2008, when i launch Photoshop (CS5 or CS6 version) in my secondary monitor don't appear the palette of the struments by my works, but is only on surface by primary monitor!!! ...and my image is on the deep. It's impossible to work on this mode!!!
If i register the "Works Area" after reimposted palette of the tools ( Level, History, Color...ecc.ecc.) when i restart Photoshop ...the windows by second monitor is on the primary monitor!!!!
What's appened???
Tanckyou to all!!!
Alfredo Manicardi - [email protected] - www.scattinaturali.com

Tank
Messaggio originale----
Da: [email protected]
Data: 14-nov-2013 0.24
A: "Alfredo Manicardi"<[email protected]>
Ogg: Ps CS5 e Ps CS6 in Mavericks: (Two monitor)
    Re: Ps CS5 e Ps CS6 in Mavericks: (Two monitor)
    created by bwl2010 in Photoshop General Discussion - View the full discussion
I had the same problem and it was driving me nuts. Thanks to conradchavez.com Blog.
Multiple displays: If you put panels (including the Tools panel) on a secondary display and then switch applications, those panels may snap back to the primary display when you switch back. To avoid this, open System Preferences, click Mission Control, and turn off Displays Have Separate Spaces. Mavericks ships with that option on, so if you want to position Adobe application panels and windows on multiple displays you should turn off that option.
You will have to log out before it works. It worked for me.
Tankyou very mutch!!!!
Now is all perfectly funzionally!!!!
Ri- Tankyou!!!
Alfredo Manicardi
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5840183#5840183
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5840183#5840183
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5840183#5840183. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop General Discussion at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Calibrating two monitors

Similar Messages

Maybe you are looking for