Calibration executive and PXI connection

1)I buy a calibration executive sofware. I need to calibrated a PXI 5102. I try to calibrated it but the program not see the module.
How it calibrated it?
2) I have a PCI-4060 multimeter how i connect it for calibrate?
Call: Jose Medina 787-658-3535 ext.2086

Hi Jose,
Any device you are calibrating in Calibration Executive should show up in MAX (Measurement and Automation Explorer) which should have an icon on your desktop when you install Calibration Executive. In the configuration window on the left look under Devices and Interfaces>>Traditional (or Legacy) DAQ. You should see your 5102. If it doesn't (I'm assuming you're using Windows here) check if it shows up in the Windows Device Manager, accessed by going to Control Panel>>System>>Hardware>>Device Manager. If it doesn't show there, then let me know. Oftentimes going through those above steps will bring up either a Windows or NI troubleshooter that you can use.
Once you have the 5102 located you can use the following document to calibrate it:
http://www.ni.com/pdf/manuals/371338a.pdf
Additionally, you can find all the connections to be made to the 4060 in the following document:
http://www.ni.com/pdf/manuals/371337a.pdf
Hope this helps!
Brian Spears

Similar Messages

Driver Setup for PXI 2569 and PXI 2529 in Switch executive

Hi,
What sould be tha "Driver Setup" for PXI 2569 and PXI 2529 in Switch executive under 'Driver Session"
Regards!!!
Vineet Shukla

Hi Vineet,
You do not need to insert anything under Driver Setup. Anytime you are using NI switches, you can simply click Configure NI Switches when creating a NI Switch Executive Virtual Device to configure the topology settings of those switches.
Just so you know, you can insert information under Driver Setup, and then you wouldn't have to use the Configure NI Switches wizard. More detail on what to insert under Driver Setup can be found in the following KnowledgeBase:
How Do I Create a Virtual Switch and Use it in my Application?
http://digital.ni.com/public.nsf/websearch/A1F0D6A3357E14B386256E4B0071FDA2?OpenDocument
In short, you would type "Topology:" followed by the topology name such as "2569/100-SPST" or "2529/2-Wire 4x32 Matrix".
Let me know if you have further questions or if this does not resolve your issue!
Chad Erickson
Switch Product Support Engineer
NI - USA

Step by step procedure to calibrate NI 4130 using Calibration executive 3.4

Our company just purchased Calibration Executive and other hardwares necessary in calibrating PXI 4130,4110 and PXI-6251/6259.
We currently have the following setup to calibrate our NI PXI 4130 SMU:
• NI PXI 1042 Chassis
• NI PXI 8108 Controller
• NI PXI-4071 Digital Multimeter
• NI APS-4100 Auxilliary Power Supply for PXI-4130
• Fluke 5700a
Can someone give a step by step procedure to do calibration using the Cal Exe software? We found this manual http://digital.ni.com/manuals.nsf/websearch/EB53C88E7EB640828625762400519455 but it isn't based on cal exe rather on the LabVIEW driver. Sorry, but we really have no idea on how to use it.
Thanks in Advance!
Cris Ibarra
Solved!
Go to Solution.

Hi Cris,
if you have Calibration Executive installed just start it and go to the Help menu and click Calibration Executive Help (or just press CTRL+F1). This help file will always be a good information source for you, it's a good practice to check it if you never calibrated the device you are about to calibrate.
If you have the software running open the drop down menu next to the Device Types label just below the menu bar and select PXI-4130 in your case. The Calibrate button will became active, please click it.
A wizard will pop up it will ask for different kinds of information about the "customer" of this calibration, than about the standards, then the environment (temperature and humidity) and at the last page about the board itself (serial number and DAQmx ID). You will know that you filled in everyrhing necessary on a page of the wizard when the next button becames active.
After the wizard the calibration will start with a warm-up (my recomendation is to wait and don't cancel) than CalExec will show you connection diagrams on how you should connect your instruments to the DUT (4130), of course you will have to connect the 5700 to the PC over GPIB.
The software will show you the progress and if the previous steps were passed or failed.
I hope this helps!
Best Regards
Botond

Performance with MySQL and Database connectivity toolbox

Hi!
I'm having quite some problems with the performance of MySQL and Database connectivity toolbox. However, I'm very happy with the ease of using database connectivity toolbox. The background is:
I have 61 variables (ints and floats) which I would like to save in the MySQL-database. This is no problem, however, the loop time increases from 8ms to 50ms when using the database. I have concluded that it has to do with the DB Tools Insert Data.vi and I think that I have some kind of performance issue with this VI. The CPU never reach more the 15% of its maximum performance. I use a default setup and connect through ODBC.
My questions are:
1. I would like to save 61 variables each 8-10ms, is this impossible using this solution?
2. Is there any way of increasing the performance of the DB Tools Insert Data.vi or use any other VI?
3. Is there any way of adjusting the MySQL setup to achieve better performance?
Thank you very much for your time.
Regards,
Mattias

First of all, thank you very much for your time. All of you have been really good support to me.
>> Is your database on a different computer? Does your loop execute 61 times?
Database is on the same computer as the MySQL server.
The loop saves 61 values at once to the database, in one SQL-statement.
I have now added the front panel and block diagram for my test-VI. I have implemented the queue system and separate loops for producer and consumer. However, since the queue is building up faster then the consumer loop consumes values, the queue is building up quite fast and the disc starts working.
The test database table that I add data to is created by a simple:
create table test(aa int, bb char(15));
...I'm sure that this can be improved in some way.
I always open and close the connection to the database "outside the loop". However, it still takes some 40-50 ms to save the data to the database table - so, unfortunatly no progress to far. I currently just want to save the data.
Any more advise will be gratefully accepted.
Regards,
Mattias
Message Edited by mattias@hv on 10-23-2007 07:50 AM
Attachments:
front panel 2.JPG ‏101 KB
block diagram.JPG ‏135 KB

Createdb prob: orclrun.sh and (no) connect internal

I installed 8.1.5.0.2 ok on a debian potato machine. But I have a problem with creating a database. Using the approach described by John Salvo: use dbassist to create db creation files.
The dbname = e8
the sid = orcl (also env ORACLE_SID=ORCL)
When running the first script (orclrun.sh), there is a problem after connecting with user internal :
Oracle8i Enterprise Edition Release 8.1.5.0.2 - Production
With the Partitioning and Java options
PL/SQL Release 8.1.5.0.0 - Production
SVRMGR> connect internal
Connected.
SVRMGR> startup nomount pfile = /u01/app/oracle/admin/e8/pfile/initorcl.ora
ORACLE instance started.
ORA-01012: not logged on
SVRMGR>
It logs off after specifying the pfile.
Right now I cannot shutdown oracle, because the user internal cannot connect anymore (its asking for a password), and the users sys and system may not connect (db init in progress).
The following illustrates my strange problem:
Oracle8i Enterprise Edition Release 8.1.5.0.2 - Production
With the Partitioning and Java options
PL/SQL Release 8.1.5.0.0 - Production
SVRMGR> connect internal
Connected.
SVRMGR> shutdown
ORA-01012: not logged on
SVRMGR> connect internal
Password:
ORA-12705: invalid or unknown NLS parameter value specified
SVRMGR>
I'm going to start all over again, this time using dbname and sid ORCL
Btw, did any of you experience strange things with the root.sh script? In my case I had to link awk to the right executable and edit the script to change ORACLE_OWNER from the unix uid to the name.
-- Yeb
null

Hmm I am almost definately sure I picked the dedicated server process when using dbassist.
Anyway, yesterday after creating the database, I wanted to shutdown and restart using svrmgrl and had the same problem again:
oracle@enschede8:~$ echo $ORACLE_SID
test
oracle@enschede8:~$ svrmgrl
Oracle Server Manager Release 3.1.5.0.0 - Production
(c) Copyright 1997, Oracle Corporation. All Rights Reserved.
Oracle8i Enterprise Edition Release 8.1.5.0.2 - Production
With the Partitioning and Java options
PL/SQL Release 8.1.5.0.0 - Production
SVRMGR> connect internal
Connected.
SVRMGR> shutdown
ORA-01034: ORACLE not available
SVRMGR> quit
Server Manager complete.After looking at the create scripts I decided to try this and it worked:
oracle@enschede8:~$ cat svr
#!/bin/sh
ORACLE_SID=test
export ORACLE_SID
svrmgrl
oracle@enschede8:~$ ./svr
Oracle Server Manager Release 3.1.5.0.0 - Production
(c) Copyright 1997, Oracle Corporation. All Rights Reserved.
Oracle8i Enterprise Edition Release 8.1.5.0.2 - Production
With the Partitioning and Java options
PL/SQL Release 8.1.5.0.0 - Production
SVRMGR> connect internal
Connected.
SVRMGR> shutdown
Database closed.
Database dismounted.
ORACLE instance shut down.
SVRMGR> I don't know what causes this. I am using
GNU bash, version 2.03.0(1)-release (i386-pc-linux-gnu)
Copyright 1998 Free Software Foundation, Inc.
null

Error -1074118625 with PXI-4071 and PXI-2527

When using the LabVIEW IVI drivers for PXI-4071 and PXI-2527, I receive an error -1074118625 in TestStand. The sequence initializes the MUX, init DMM, connects the MUX, waits for debounce, and then upon reading from the DMM, I receive this error.
Error: niDMM Read Waveform (waveform data).viExplanation could not be found for the requested status code.
Verify that the requested status code is correct.
[Error Code: -1074118625, User-defined error code.]
This sequence of events is successfully used multiple times elsewhere in the TestStand. This error does not appear in any knowledgebase article nor in any help. Any explanation would be greatly appreciated.
Solved!
Go to Solution.

I found this with google that seems like it might apply:
http://digital.ni.com/public.nsf/allkb/A593DEBFD86A69C68625727900748EEC

Mirror and Witness Connection in a Disconnected state immediately after adding Witness Server to Mirror session.

After adding the Witness Server to the Mirror session, the Witness Connection state between the Mirror and Witness Connection is Disconnected and the state between Principal and Witness Connection is Connected.
The procedures defined in Books Online was used to setup Database Mirroring...when the Witness server was added to the Mirror session, only the alter database T-SQL statement was executed on the Principal server.
ALTER DATABASE <db_name> SET WITNESS = 'TCP://<servername>:<port>'
After executing the above statement, a few seconds later the state between Principal and Witness Connection changed to Connected and the state between Mirror and Witness Connection remains Disconnected.
The Mirror session is not using Certificates, every server is on the same domain, using the same domain login account, and all servers have SP2 installed running Enterprise Edition.
Any idea's why the state between Mirror and Witness Connection remains Disconnected?
Thanks,

I have the same problem. All 3 servers are on a workgroup and I'm using certificates. All three servers are connected via switch. This is a test environment, with the principal server being a 64 bit OS with Windows Server 2003 R2 with SQL Server standard x64, the witness server is a Windows server 2003 SP2 x32 with SQL Server Express, and the mirror is Windows XP x32 with Sql Server Standard. Using hard coded static IP addresses (FQDN makes no difference, and they get resolved to IP addresses anyway!). The mirror server log shows
'The server instance Witness rejected configure request, read its error log file for more information
but of course there are no errors logged on the witness server - not by SQL, nor in the event log. When the witness is set on the princial server, the Database mirroring monitor shows almost immediately that the witness and prinicapl servers are connected, but it takes quite a few seconds before the witness/mirror state is shown as disconnected. Until then the entry is blank. The monitor also shows High Saftey with automatic failover, which isn;t true - since the mirror and witness are not connected, no failover occurs when the principal is taken offline.
Since I'm running terminal services on the XP machine to interact with the witness and principal server, I find it hard to image that there are network issues.
If the witness can connect with the principal and the principal can conect with the mirror, under what circumstances will the witness NOT connect with the mirror? When I check the witness server for entries in the database_mirroring_witness view the following is shown:
RTJobs TCP://primary-sql:5022 TCP://192.168.100.14:5022 2 FULL 1 1 2263BD97-1004-4D73-9966-7AFB89E5626E A6EE18DF-19C4-48EC-8C06-77074EF5A275 0 1
Interestingly the IP address of the prinical server is replaced by the Sql Server instance name (primary-sql) but this doesn't happen for the witness.

How to check ABAP and Portal connections

Hi
I was told to check ABAP and Portal connections. What does that mean? And what and where to check?
Thanks
Annie

Hi
Thanks for your reply.
We are on BI 7. SP16.
When i run that in se38, i am getting the following information: No default in RSPOR_T_PORTAL and no user parameter RSPOR_DEFAULT_PORTAL" when i clicked on yes(tickmark), view BI_Content of web template 0ANALYSIS_PATTERN(A) is displayed
There are two options with check box are present 1. 30 template present (Unchecked) 2. BI- Template Present (checked), and a big XML code is displayed.
When i executed in browser mode, it says Windows cannot find'/irj/servlet/prt/portal............... make sure you typed the name correctly and then try again. to serch for a file, click the start button, and then click search"
What does that mean?
Regards
Annie
Edited by: Annie on Nov 17, 2008 5:38 AM

Peer to peer between PXIe-5451 and PXIe-7966R

Hello,
I would like to connect two devices - PXIe-5451(waveform generator) and PXIe-7966R(NI FlexRIO) with P2P streaming. I want to transmit data from FPGA to generator and i took example from NI-FGEN. When i'm starting host-vi, there is an error occured (see picture).
What i'm doing wrong?
Solved!
Go to Solution.

So, i'm solved this problem. It was my mistake. I picked the wrong resource name for my waveform generator. But now i have another problem. "Unknown channel or repeated capability name" error occures, when i'm starting VI.
Attachments:
1.png ‏164 KB
2.png ‏208 KB

WebToGo and JSP connection

Hi
I am trying to get JSP to connect trough the WebToGo server using
OraUserProfile oraUserProfile = ((OraHttpServletRequest) request).getUserProfile();
Connection conn = ((OraUserProfile) request.getUserPrincipal()).getConnection();
This should automaticaly reroute me to the right DB wether i am online or not. I got this code from the WebToGo documentation for developing servlets.
But I am getting the following error on the client when I access the aplication on the client. (The application is a simple JSP testpage that list all entrie i scott.emp table) :
java.lang.NullPointerException
Direct connect to serverside DB and clientside LiteDB is ok, but not connection trough webtogo server(clientside)
Has anyone done this in JSP ? Please give exsamplecode.
Any help would be greately appreciated.
Alexander

Well, for once I have managed to answer my own question.
This is my modified simpleqry.jsp file that should demonstrate the connection methods. Remember that some nees other files to work, eg classes12.zip, polite40.jar.
Use it and enjoy !
<%@ page import="java.sql.*"
import="oracle.jdbc.*"%>
<!------------------------------------------------------------------
* This is a basic JavaServer Page that does a JDBC query on the
* emp table and outputs the result in an html table.
* Originally developed by Oracle Corp.
* Modified by Alexander Moan, Bouvet AS, Norway
* to use multiple connection methods.
* Main purpose is to test connections in different environments from JSP page
* Oracle Thin
* Oracle OCI
* Oracle Polite
* Oracle WebToGO
* Just un-comment the lines used by your prefered connection method and run in JSP engine
--------------------------------------------------------------------!>
<HTML>
<HEAD>
<TITLE>
SimpleQuery JSP
</TITLE>
</HEAD>
<BODY BGCOLOR=EOFFFO>
<H1> Hello
<%= (request.getRemoteUser() != null ? ", " + request.getRemoteUser() : "") %>
! I am SimpleQuery JSP.
</H1>
<HR>
<B> I will do a basic JDBC query to get employee data from EMP table
</B>
<P>
<%
try {
// WebToGo connection starts
// Used to test connection to autocreated LiteDB from WebToGo klient
// Get request object
//OraHttpServletRequest ora_request = (OraHttpServletRequest) request;
// Get WebToGo UserProfile
//OraUserProfile oraUserProfile = ora_request.getUserProfile();
// Get WebToGo connection
//Connection conn = oraUserProfile.getConnection();
// WebToGo connection ends
// Driver for Polite connections, that is Oracle Lite
// DriverManager.registerDriver(new oracle.pol.poljdbc.POLJDBCDriver());
// Driver for Thin and OCI driver
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
// Connections for Thin, OCI and Polite connections
// OCI connection : jdbc:oracle:oci8:@<sql-net connection entry in tnsnames>, <username>, <password>
// Connection conn = DriverManager.getConnection("jdbc:oracle:oci8:@WHTL","scott", "tiger");
// Thin connection : jdbc:oracle:thin:@<host>:<port>:<sid>, <username>, <password>
Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@webhotel:1521:whtl","scott", "tiger");
// Polite connection : jdbc:polite:<DSN name if lite-base in non-default directory> or <database name if lite-base in default directory>, <lite-system-user> , <webtogo-user-pwd>
// Connection conn = DriverManager.getConnection("jdbc:polite:jane_scott","system", "jane");
// Create statement object using java.sql.Statement
java.sql.Statement stmt = conn.createStatement ();
// Execute select statement
ResultSet rset = stmt.executeQuery ("SELECT ename, sal FROM emp ORDER BY ename");
if (rset.next()) {
%>
<TABLE BORDER=1 BGCOLOR="C0C0C0">
<TH WIDTH=200 BGCOLOR="white"> <I>Employee Name</I> </TH>
<TH WIDTH=100 BGCOLOR="white"> <I>Salary</I> </TH>
<TR> <TD ALIGN=CENTER> <%= rset.getString(1) %> </TD>
<TD ALIGN=CENTER> $<%= rset.getDouble(2) %> </TD>
</TR>
<% while (rset.next()) {
%>
<TR> <TD ALIGN=CENTER> <%= rset.getString(1) %> </TD>
<TD ALIGN=CENTER> $<%= rset.getDouble(2) %> </TD>
</TR>
<% }
%>
</TABLE>
<% }
else {
%>
<P> Sorry, the query returned no rows! </P>
<%
rset.close();
stmt.close();
} catch (SQLException e) {
out.println("<P>" + "There was an error doing the query:");
out.println ("<PRE>" + e + "</PRE> \n <P>");
out.println("<P>" + "Dette er en sjekk 2!");
%>
</BODY>
</HTML>

EXECUTE C_0792 on connection 0, rc=-9300 - BPC Error

Hi All,
When I tried to extract data from BPC using FIM job, I am getting below error.
Kindly help me to understand the issue here and how to resolve?
C Tue Feb 17 16:13:47 2015
C *** ERROR =>   execute() of C_0792, internal error : no result set
[dbsdbsql.cpp 1579]
C {root-id=001B21585E281EE4ADD4D9C1E11853C4}_{conn-id=001B21585E281EE4ADD4D9C1E11873C4}_1
C *** ERROR => EXECUTE C_0792 on connection 0, rc=-9300
[dbslsdb.cpp 9682]
C SQLCODE    : -9300
C SQLERRTEXT : Internal error : no result set
C sc_p=7f0b4afe8150,no=792,idc_p=(nil),con=0,act=1,slen=171084,smax=171264,#vars=0,stmt=7f06a0ddd3b0,table=
C MDX SELECT
C    NON EMPTY {
many lines with actual BPC data
C NTH1].&[TRGT_20_22_PPMD] } } ON 0
C FROM [eSight02_CORPORATE] CELL PROPERTIES VALUE ;
B ***LOG BY2=> sql error -9300 performing OPC [dbds         437]
B ***LOG BY0=> Internal error : no result set [dbds         437]
Thanks and Regards,
Rajesh

Hi,
RC-50004: Fatal: Error occurred in ApplyDatabase
"Cannot execute configure of database using RapidClone"
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process.This is a generic error, so please check the installation log file for details.
Also I was able to install R12 before to the same desktop, now I am having problems
re-installing it. I have also cleaned all the traces of the previous install before this re-install.Did you follow the steps in (Note: 567507.1 -How to Remove an Oracle E-Business Suite Release 12.x Windows Environment) to clean your previous installation?
Regards,
Hussein

New FIOS customer with dropped VOIP calls and Internet connection

I am a new FIOS customer. Got my 50/25 connection a week ago, switching from a TWC 6/1 connection. Ever since the new connection, I've had numerous issues.
My VOIP (Ooma) connection constantly drops and re-connects during conversations
I've had random Internet connection losses, which picks up again after a few minutes
My home alarm starts chirping every once in a while
I've contacted Verizon several times due to these problems and have received varying answers with no resolution of the problem.
The first time I spoke with support, the tech logged into my router and changed the WiFi channel saying that would fix the problem. It didn’t.
The second time I contacted them, the tech ran a bunch of diagnostics and said everything looked fine so it must be an IP address conflict with my devices, because I had a couple devices using static IP addresses. He said everythinf should be DHCP and the last two digits could not be higher than 99 (192.168.1.99). He said FIOS does not support 3-digit numbers at the end.
So I changed all my devices to DHCP and ran some online VOIP tests. It showed a packet loss of 2-5% and MOS score of 1 (which is bad). I was still getting dropped connections, so I disconnected all devices and connected just one computer to the router and tested again. I was still getting packet loss.
Then I called support a third time, this time the tech said there were no 2-digit IP restrictions and that he was detecting there was no UPS baterry backup for the ONT which was probably causing the problem, so he dispatched a field tech to my house.
Today the field tech came (same guy as before), he took one look at the box and said it was too close to my Electric meter and the RF from the meter was causing interference to the FIOS connection and resulting in dropped connection.
He moved the ONT to another location and said that should fix it.
Well, I'm still seeing packet loss and low MOS score when I run the VOIP test.
I don't know how much of what the techs are saying is true and how much is made up stuff.
Has anyone had similar issues and have thoughts on solutions or likely causes for dropped VOIP calls and connections? Could RF be causing this?
I thought going from a 6/1 Cable connection to a 50/25 FIOS connection would be awesome, but this has turned out to be a nightmare, and I may have to switch back to cable if the problem is not resolved.
I would appreciate any help.
Thanks!

Don't know where the packet loss is happening. I ran the VOIP test on myspeed.visualware.com and it shows a packet loss of 2-5% at different times and a MOS score of 1.
The report says MOS should be around 4 for good VOIP calls.
The Verizon tech who came to the house just blamed the electric meter box for RF interference and move the ONT farther away.
My concern is that I'm getting different answers from different techs at Verizon.
Regarding IP addresses. The Router shows a DHCP range from 192.162.1.2 to 192.168.1.254 as available for devices on the network. So, if I need to assign a static IP to a device should I use a number below 99 or above 151?
Thanks!

What is the better way to open and close connection in bean

Hello, may i ask about the best way to open and close the connection?
At the first, the connection code is store in Conn class bean. The JSP page will call a method in Process bean to process the query and update of database. the Process bean is using th Conn to connect to database.
In my process bean, it have a method for each type of sql like select, insert, update, and delete for each tables. Each method will call the Conn to open and close the connection. The jsp page can simply call a method retrieve or update records.
However, when calling the processUpdate method, it is a method that update a group of tables base on the query result of another group of tables and calculation. If I calling the query method in the same bean file, it will open and close the connection many times (more than 1000 times). After open and close the connection several times, the connection to mySQL will be fail.
Currently, i include 2 method in Process that is only calling the Conn to open the connection and close connection. When calling the openConnection method, it will also set the boolean connected in the class to true and call Conn to open connection. When calling the closeConnection method, it will also set the boolean connected in the class to false and call Conn to close connection.
After that, i add some change to the query method which is when the connected is false, it will open the connection by calling the Conn and close the connection themself. If the connected is true, it will not call the Conn to open and close the connection because it already connected to the database.
Now, i when i calling the query method in jsp, it can open the connection and close the connection individually. When i call the processUpdate in the jsp, this method will calling the openConnection before calling the query and calling closeConnection at the end. It not only faster the process(less open and close), it also no cause the connect to mySQL fail error again. However, it also make the coding in the bean file more longer and complex.
Is there have any better solution?

Use connection pooling. This will put the connection management in the hands of the webserver, not your code. Check out this post:
http://forum.java.sun.com/thread.jspa?threadID=741788&messageID=4252932#4252932

Open discoverer report in new browser window and without connections page

Hi All,
We are using Oracle 11g Discoverer 11.1.1.4. Requirement is to open the discoverer report in a new browser window and without connections page.
When we are running discoverer reports with this parameters we unwantedly get the connections page of the discoverer plus which we don't want.
Went through the documentation given in this page and followed it still the issue persists, and i see couple of threads with my issue and no updates.
This excerpt is from the documentation available in the link
" _plus_popup=true and framedisplaystyle=embedded launches Discoverer Plus in a new pop-up browser window that contains the Plus applet embedded in it "
http://www.art2dec.com/documentation/docs/oas10g1012/linux/bi.1012/b13918/urlstart.htm
and Here is what we use to invoke our reports.
http://ipaddress:port/discoverer/plus?cn=cf_123&_plus_popup=TRUE&framedisplaystyle=EMBEDDED&wb=disc_wb_1
Request the forum users from PRO discoverer group to help me out of this issue and expect a good discussion on this.
Thanks in advance

Closing the thread
We were able to achieve by changing the browser settings in the IE 8 Browser. Disabled Tabbed browsing.

I am using Windows 7 Pro, 64 bit on a brand new PC, and cannot connect to the iTunes store using iTunes version 10. HELP!!

Ok, so after purchasing a new computer, with windows 7 pro, 64 bit, I tried downloading the newest iTunes, which at the time was 10.2.1 (i believe). After installation, everything seemed to work, except that iTunes was unable to securely connect to the internet, use home sharing, or validate my computer.
As troubleshooting, I first ran msconfig, and then turned OFF all programs that boot at start up EXCEPT itunes and quicktime. After a restart, i opened itunes again, and got the same result. That led me to believe that iTunes was NOT being blocked by another program on my machine. I am currently running itunes 10.7 successfully on a Windows 7 32 machine at work. Anyhow, for grins, I tried to install version 9 on the new computer, and it installed perfectly, and immediately connected to the itunes store, leading me to believe that there is nothing wrong with my software configuration (not sure if this is a safe assumption or not). I then tried to let iTunes update itself using the automated update function. It tried to update itself to the most current version, then 10.6. Again, iTunes was unable to connect to the iTunes store. I HAVE tried disabling the anti-virus software (AVG), but that made no difference.
I have since gone back and reinstalled iTunes 9. Here's the catch though. When I reinstalled using version 9, I had to redo all my library files. I'm about 1/2 way through my CD's, and now have a substantial library file going. The last time I let iTunes update itself to 10.6, once I realized that it was not going to connect to the store, I uninstalled iTunes, and reinstalled ver. 9. However, when I did this, it told me it could no longer open the library file, because it was a newer .itl or .xml (i believe it was one of those two extensions) library file. At that point, I basically started everything over again, using version 9, and have been importing CD's like a madman at night.
Here are my questions:
1) Is there a way to make a copy of the files that store my library info, so that if my upgrade to ver 10 IS NOT SUCCESSFUL, I can restore ver 9, but still have all of the album art work, playlists (when I import music, I create a playlist with the artists' name, and store things that way), etc. in tact?
2) What else can I try (firewall settings, internet options, etc.) to try and get version to to successfully install? I would really like to get all the benfits of the newer versions.
3) When I tried to get apple tech support before, they wanted me to pay a ridiculous 69$ fee for phone support. I just bought an iphone 5....this should entitle me to a fresh 90 days of phone support, right? The reason I ask here is that I could hardly understand the "tech" that answered the phone when I called for tech support last time, and to be honest, it really ****** me off that they wanted to try and milk me for another 69 bucks....I've purchased every iPhone since the 3Gs came out (pre-ordered at that), and have nearly gone broke purchasing music from their iTunes store....heck, maybe they're doing me me a favor not letting me into the store, huh?
Any help or ideas would be greatly appreciated,
-Brian

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Calibratio​n executive and PXI connection

Similar Messages

Maybe you are looking for

Calibration executive and PXI connection