Calibration error message in WCS(MSE)
I get a calibration error message in WCS when I try to add data points in the RF calibrate models section. Here is the error message:
Error in Calibration. MessageMEDIATION-5, WcCalibration!x.x.x.x!xx:xx:xx:xx:xx:xx,row Status,No access
The first set of x is the IP address of the controller and the other x is the MAC address of the wireless system that is being used for calibration.
Hi,
Which Wireless-Card you used?
Best you use the Cisco CB21AG PCMCIA Card. I had similar problems with intel wireless chipsets
Sincerely,
Frederik
Similar Messages
-
Calibration error message in WCS
I get a calibration error message in WCS when I try to add data points in the RF calibrate models section. Here is the error message:
Error in Calibration. MessageMEDIATION-5, WcCalibration!x.x.x.x!xx:xx:xx:xx:xx:xx,row Status,No access
The first set of x is the IP address of the controller and the other x is the MAC address of the wireless system that is being used for calibration.Hi,
Which Wireless-Card you used?
Best you use the Cisco CB21AG PCMCIA Card. I had similar problems with intel wireless chipsets
Sincerely,
Frederik -
Huey Pro calibrator- error message display measurement Error
i am using this huey pro calibration.. it had been a year without problem... but now i am trying to calibrate my apple cinema display LCD 30 inch it keep saying error message- display measurement error.. and huey support never answer my e-mail. any idea? how can i fix it.. i did re install software many times but same thing happen.. so right now i can;t calibrate my monitor.. any help please
>a nice NVidia card... Please help Adobe!
1a - what is the model nVidia card, and what is your driver version?
1b - for instance, I have a GTX 285 and driver 296.10
2a - aside from the occassional Adobe employee, this is a user to user forum, not Adobe suport
2b - how to contact Adobe...
Adobe contact information
http://www.adobe.com/support/contact
In the US - Adobe General support 800-833-6687 M-F 5am-7pm Pacific
In the US - Adobe Install Problems 800-642-3623
In the US - Adobe Activation 866-772-3623 Open 24/7 -
Huey Pro Calibration Error message- measurement error
i need using this huey pro calibration for year. but now i am trying to calibrate my apple cinema display LCD 30 inch it keep saying error message- display measurement error.. and huey support never answer my e-mail. any idea? how can i fix it.. i did re install software many times but same thing happen.. so right now i can;t calibrate my monitor.. any help please?
Hi,
Which Wireless-Card you used?
Best you use the Cisco CB21AG PCMCIA Card. I had similar problems with intel wireless chipsets
Sincerely,
Frederik -
Error message - power calibration error
We are experiencing a power calibration error message when the studetns are buring their edited projects to DVD. Can you give me any advice?
Moost often, this is due to cheap media, or an incompatibility between the write speed of the media and your drive.
You might try building the project to a folder on the hard drive and burning a disc of that with toast, which allows you to chooose different burn speeds. -
Error Messages When Burning / Disk only plays in certain DVD players
When burning most all of my DVD's in DVD Studio Pro, after all of the encoding in the burn process and the program starts the initialization, I get a Media Error Calibration Error message. When I retry to burn, everything seems fine. But, my DVD's only play in some DVD players. Others say unreadable disc. Any ideas?
Many times, media can cause your problem, I use Maxell myself, (never had any compatibility issues. Here's a URL to a site that rates the quility of many different kinds of media and there reliability.
It also includes alot of very useful info below the ratings area.
URL: http://digitalfaq.com/media/dvdmedia.htm
G5 Quad Core 2.5GHz & G4/1.2GHz Dual 6GB RAM Mac OS X (10.4.5) [storage] X RAID's : [capture] Io : [decks] Betacam SP, S-VHS, DSR-11 -
Problem with WCS, with an error message (Error: Object not found in device)
I have a problem with WCS, I can not open the window monitor / controllers with an error message (Error: Object not found in device) -> https: / / 10.19x.xxx.xx/webacs/switchDetailAction. do? ControllerID = 23735
by cons I can open the window configures / controllers -> https: / / 10.19x.xxx.xx/webacs/switchGeneralAction.do? command = detail & ControllerID = 23735
Is there a way to recreate the database or the object? thank you in advancethank you for your help
Unfortunately, the command "refresh config from controller" does not solve the problem because we have a negative result
(in mode retain or in mode delete) with the following logs :
Log file wcs-0-0.log
10/19/10 12:07:16.333 ERROR[snmpmed] [23] Response VarBind missing for class InterfaceConfig attribute isInterfaceWired
Log file tomcat_localhost_access_log
10.197.xxx.xx - - [19/Oct/2010:12:07:16 +0000] "POST /webacs/switchListCommandAction.do HTTP/1.1" 200 47399
10.197.xxx.xx- - [19/Oct/2010:12:07:16 +0000] "GET /webacs/alarmSummaryAction.do?command=summary&dojo.preventCache=1287490037130 HTTP/1.1" 200 421 -
Up until the beginning of this month my Thunderbird was working fine with my roadrunner email address. I have not downloaded any new software or made any changes to my settings during this time. Now I can no longer send emails (although it claims they are sent) and I never get an error message. I'm definitely in online mode, can receive all messages fine, and can send messages from my road runner server fine through webmail. I have checked to ensure no firewalls or antiviruses are blocking my outgoing messages and know the SMTP is correct. Please help!
Hi...thanks so much for your help! It says "mail sent successfully" and shows it in my sent folder after I click send.
Troubleshooting:
Application Basics
Name: Thunderbird
Version: 24.4.0
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.4.0
Profile Folder: Show Folder
(Local drive)
Application Build ID: 20140316131045
Enabled Plugins: about:plugins
Build Configuration: about:buildconfig
Crash Reports: about:crashes
Memory Use: about:memory
Mail and News Accounts
account1:
INCOMING: account1, , (pop3) pop-server.tampabay.rr.com:110, plain, passwordCleartext
OUTGOING: smtp-server.tampabay.rr.com:25, plain, none, true
account2:
INCOMING: account2, , (none) Local Folders, plain, passwordCleartext
Extensions
Important Modified Preferences
Name: Value
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.disk.smart_size_cached_value: 358400
extensions.lastAppVersion: 24.4.0
font.internaluseonly.changed: true
font.name.monospace.el: Consolas
font.name.monospace.tr: Consolas
font.name.monospace.x-baltic: Consolas
font.name.monospace.x-central-euro: Consolas
font.name.monospace.x-cyrillic: Consolas
font.name.monospace.x-unicode: Consolas
font.name.monospace.x-western: Consolas
font.name.sans-serif.el: Calibri
font.name.sans-serif.tr: Calibri
font.name.sans-serif.x-baltic: Calibri
font.name.sans-serif.x-central-euro: Calibri
font.name.sans-serif.x-cyrillic: Calibri
font.name.sans-serif.x-unicode: Calibri
font.name.sans-serif.x-western: Calibri
font.name.serif.el: Cambria
font.name.serif.tr: Cambria
font.name.serif.x-baltic: Cambria
font.name.serif.x-central-euro: Cambria
font.name.serif.x-cyrillic: Cambria
font.name.serif.x-unicode: Cambria
font.name.serif.x-western: Cambria
font.size.fixed.el: 14
font.size.fixed.tr: 14
font.size.fixed.x-baltic: 14
font.size.fixed.x-central-euro: 14
font.size.fixed.x-cyrillic: 14
font.size.fixed.x-unicode: 14
font.size.fixed.x-western: 14
font.size.variable.el: 17
font.size.variable.tr: 17
font.size.variable.x-baltic: 17
font.size.variable.x-central-euro: 17
font.size.variable.x-cyrillic: 17
font.size.variable.x-unicode: 17
font.size.variable.x-western: 17
mail.openMessageBehavior.version: 1
mail.winsearch.enable: true
mail.winsearch.firstRunDone: true
mail.winsearch.global_reindex_time: 1386018562
mailnews.database.global.datastore.id: d0565083-6917-4a0a-868f-37bebde1e81
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1398260550
places.history.expiration.transient_current_max_pages: 104808
plugin.importedState: true
plugin.state.npdeployjava: 0
print.printer_Lexmark_X264dn.print_bgcolor: false
print.printer_Lexmark_X264dn.print_bgimages: false
print.printer_Lexmark_X264dn.print_colorspace:
print.printer_Lexmark_X264dn.print_command:
print.printer_Lexmark_X264dn.print_downloadfonts: false
print.printer_Lexmark_X264dn.print_duplex: -1574483314
print.printer_Lexmark_X264dn.print_edge_bottom: 0
print.printer_Lexmark_X264dn.print_edge_left: 0
print.printer_Lexmark_X264dn.print_edge_right: 0
print.printer_Lexmark_X264dn.print_edge_top: 0
print.printer_Lexmark_X264dn.print_evenpages: true
print.printer_Lexmark_X264dn.print_footercenter:
print.printer_Lexmark_X264dn.print_footerleft: &PT
print.printer_Lexmark_X264dn.print_footerright: &D
print.printer_Lexmark_X264dn.print_headercenter:
print.printer_Lexmark_X264dn.print_headerleft: &T
print.printer_Lexmark_X264dn.print_headerright: &U
print.printer_Lexmark_X264dn.print_in_color: true
print.printer_Lexmark_X264dn.print_margin_bottom: 0.5
print.printer_Lexmark_X264dn.print_margin_left: 0.5
print.printer_Lexmark_X264dn.print_margin_right: 0.5
print.printer_Lexmark_X264dn.print_margin_top: 0.5
print.printer_Lexmark_X264dn.print_oddpages: true
print.printer_Lexmark_X264dn.print_orientation: 0
print.printer_Lexmark_X264dn.print_page_delay: 50
print.printer_Lexmark_X264dn.print_paper_data: 1
print.printer_Lexmark_X264dn.print_paper_height: 11.00
print.printer_Lexmark_X264dn.print_paper_name:
print.printer_Lexmark_X264dn.print_paper_size_type: 0
print.printer_Lexmark_X264dn.print_paper_size_unit: 0
print.printer_Lexmark_X264dn.print_paper_width: 8.50
print.printer_Lexmark_X264dn.print_plex_name:
print.printer_Lexmark_X264dn.print_resolution: 0
print.printer_Lexmark_X264dn.print_resolution_name:
print.printer_Lexmark_X264dn.print_reversed: false
print.printer_Lexmark_X264dn.print_scaling: 1.00
print.printer_Lexmark_X264dn.print_shrink_to_fit: true
print.printer_Lexmark_X264dn.print_to_file: false
print.printer_Lexmark_X264dn.print_unwriteable_margin_bottom: 0
print.printer_Lexmark_X264dn.print_unwriteable_margin_left: 0
print.printer_Lexmark_X264dn.print_unwriteable_margin_right: 0
print.printer_Lexmark_X264dn.print_unwriteable_margin_top: 0
Graphics
Adapter Description: Intel(R) HD Graphics
Vendor ID: 0x8086
Device ID: 0x0152
Adapter RAM: Unknown
Adapter Drivers: igdumd64 igd10umd64 igd10umd64 igdumd32 igd10umd32 igd10umd32
Driver Version: 8.15.10.2639
Driver Date: 2-1-2012
Direct2D Enabled: false
DirectWrite Enabled: false (6.2.9200.16571)
ClearType Parameters: ClearType parameters not found
WebGL Renderer: false
GPU Accelerated Windows: 0
AzureCanvasBackend: skia
AzureFallbackCanvasBackend: cairo
AzureContentBackend: none
JavaScript
Incremental GC: 1
Accessibility
Activated: 0
Prevent Accessibility: 0
Library Versions
Expected minimum version
Version in use
NSPR
4.10.2
4.10.2
NSS
3.15.4 Basic ECC
3.15.4 Basic ECC
NSS Util
3.15.4
3.15.4
NSS SSL
3.15.4 Basic ECC
3.15.4 Basic ECC
NSS S/MIME
3.15.4 Basic ECC
3.15.4 Basic ECC -
I have OSX 10.7 Lion. I set up a separate email account for my wife. All of a sudden when she tries to enter and website from email we get the following error message. JavaScript; The notnull validator has already been loaded. From there we can't seem to go any where. When you hit OK it just keeps appearing and the only way to get out of it is to quit Safai. If you try and got directly to Safari you get the same error message and can't go any further. Please help.
What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
Error message in adobe digital editions
Hi.
I am getting this message in Adobe Digital Editions when I open an epub I made
"the document appears to have minor errors that might cause it to be displayed incorrectly"
The epub is displaying fine. I checked in Adobe, Sony, FBReader, and Calibre.
The html and css is valid. No warnings. Perfectly valid. All of it.
Epubcheck gives it no warnings or errors.
Some of the chapter titles in the table of contents are pretty long. Could that be a problem?
I have no idea how else to check it to find out what could be causing this error. Does anyone have any idea?
Thanks.I had this same problem. epubcheck that I have on my desktop said no errors, but ADE would give the "minor errors" message. I put some serious dents in my forehead from pounding it on the desk.
I uploaded my ePUB to http://www.threepress.org/document/epub-validate/ and let it validate against schemas that I don't have and it gave me the clue that I needed. Because I had exported my book from MS-Word using their awful HTML export and then (through a series of ordeals) converted it to XHTML and cleaned up all the uglies. But, there was one piece I forgot to fix. The encoding value in the top-level xml element. It was set to Windows CP1252. It has to be UTF-8 or UTF-16. When I changed the encoding, I had to fix some of the quote marks that I had missed in earlier passes.
After making the encoding change and the final cleanup, I now have my book on my nook.
I hope this helps someone else in the future.
Eric -
Error message: "The attempt to burn a disc failed. An unknown error"
Anyone having this error message after attempting to burn a disc?
I have 6 discs sitting here ruined after this happened consistently.
Called Apple tech support. Said they never heard of this.
What can I do to resolve? Tried doing the iTunes update and that does not appear to have helped. I am beyond frustrated. To not be able to burn all my purchased music to cd's is not making me a happy camper.
Anyone have any ideas how to fix?
Thanks for all suggestions..Hey guys, having same type of problem and figured I would throw in my 2 cents. I was getting "error 4000"; i Googled that and followed the procedures for going to my control panel, add/remove and clicking repair. I tried a burn again, also paying attention to previous notes and lowered my write speed to 8X. Same error, different number, this time 4261. I found this thread so I decided to paste my info too, but i do notice the last line of code reads "speed 10X". Hope this helps? I have burned plenty of CDs before, I am burning a mix of MP3 and MP4, amazon and apple purchased, and using older memorex CD-R. They say "recordable, 52X, 700mb, 80 min" at the top. Hope it helps and thanks for the time and effort on here!
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
Dell Inc. Inspiron 1464
iTunes 10.0.1.22
QuickTime 7.6.8
FairPlay 1.9.16
Apple Application Support 1.3.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.2.0.47
Apple Mobile Device Driver 1.49.0.0
Bonjour 2.0.3.0 (214.3)
Gracenote SDK 1.7.1.420
Gracenote MusicID 1.7.1.78
Gracenote Submit 1.7.1.106
iTunes Serial Number A13F95689B6E935E
Current user is an administrator.
The current local date and time is 2011-03-18 21:25:19.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
** External Plug-ins Information **
No external plug-ins installed.
iPodService 10.0.1.22 is currently running.
iTunesHelper 10.0.1.22 is currently running.
Apple Mobile Device service 3.2.0.0 is currently running.
** CD/DVD Drive Tests **
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
E: HL-DT-ST DVD+-RW GT30N, Rev A101
Audio CD in drive.
Found 15 songs on CD, playing time 69:43 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:28:41
Track 3, start time 07:28:54
Track 4, start time 11:36:32
Track 5, start time 15:58:57
Track 6, start time 20:26:51
Track 7, start time 25:01:74
Track 8, start time 29:43:02
Track 9, start time 34:25:65
Track 10, start time 39:19:72
Track 11, start time 44:14:37
Track 12, start time 49:13:50
Track 13, start time 54:14:42
Track 14, start time 59:16:04
Track 15, start time 64:17:54
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 10 16 24.
The drive CDRW speeds are: 10.
The drive DVDR speeds are: 10.
The drive DVDRW speeds are: 10.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4261(0x000010a5). It happened on drive E: HL-DT-ST DVD+-RW GT30N on CDR media at speed 10X. -
Error message - won't let me burn any dvd's
Hello
Tried a couple of times to burn this DVD project using DVD SP 4.1 and the first DVD went well, tried a second one got this error message...tried a different dvd got the same message:
Formatting failed
The recording device reported the media error: Power calibration area error. (0x73, 0x03.)
Never saw this before - fix?
Thanks
KBAlso get this in the build log - don't know if this is a problem or not...
Warning: The directory ‘/Volumes/All Media/DVDSP4_projects/Wedding 2004’ will not be included in the final disc.
Warning: The directory ‘/Volumes/All Media/DVDSP4projects/JACKETP/PAR’ will not be included in the final disc.
Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
Warning: The file ‘WEDDING_04.layout’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
Thanks
KB -
Blue screen of death - Error message included
I have searched on the forum and found nothing exactly like my situation. I am running Labview 7.1 in a test bay through the NI chassis with an embedded controller. The system basically reads up to 100 RTD, and 224 pressure readings and then writes them to a network computer. Every so often, we get the "blue screen of death" when running the program. Sometimes there are problems with the network computer, so there is am option inside the program to send all the data to the local hardrive. This is basically how we check to see if the problem is related to the network, or if it is the Labview system. However, the network has never been the cause of the blue screen of death(since we have also received the blue screen while writing to the local hardrive). Furthermore, the system only gives the blue screen ever so often, not all the time. The error message is attached, and seems to be memory related. I should also mention that we run two labview program at the same time, one controls a series of valves, and the other displays all the data be recorded the the network computer. After about 10 reboots, as a desperate attempt, we only ran the valve program, and it seemed to work, but it may just be luck. Another attempt was and option in windows(XP) called "paging" which we turned off. Last I know the system was working, but under the above mentioned conditions which will not work for day to day testing.
Any help would be greatly appreciated.
Thank you
Attachments:
Error message.xls 14 KBHi,
I found a post that looks like it might be a similar issue. The first link does not seem to be valid any more. Below are three more external links that also describe this error message.
http://www.5starsupport.com/info/stop_error.htm#7a
http://www.osronline.com/ddkx/ddtools/bccodes_2vjb.htm
http://www.microsoft.com/technet/prodtechnol/windows2000serv/reskit/prork/prhd_exe_qofl.mspx?mfr=tru...
I hope this helps!
Regards,
Missy S.
Calibration Engineer
National Instruments -
Q: Error message when printing Photoshop CS3 file
I get an error message when I try printing a CS3 photo on my Epson C86 printer, and the resulting print has the wrong colors and luminance levels.
Error Message = "Some PostScript specific print settings (Interpolation, Calibration, Encoding) will be ignored since you are printing to a non-PostScript printer."
Any ideas for how to work through this problem?
Thanks in advance for your help.Chris -
Thanks for your quick response.
Do I understand you correctly in saying that Photoshop CS3 has PostScript information that it routinely sends to a printer, and therefore I would need to have a PostScript compatible printer inorder to work with this information (and also for my ColorMunki calibration to work)?
Based upon what you said, I think my color problems are because the ColorMunki profile for my printer, paper, & ink combination are being ignored.
Tom -
Burning Problem - Power calibration error
hi...
i use dvd studio pro 3.02 and now when i try burning the DVD my laptop the error message appears.
"The recording device reported the media error: Power calibration area error. (0x73, 0x03.)"
i doubt it but is there anyway i can fix that?Hi
You have two things to check:
- Try a different media. Check this site about * about quality media *.
- Try creating a disc image in your hard drive and burning it with Disk Utility and/or Toast. Check thsi tutorial: * Creating Disc Image in DVDSP *
Hope that helps !
Alberto
Maybe you are looking for
-
Am I the ONLY person who's angry that mobile hasn'...
Hello. Am I the ONLY person who's angry that my mobile hasn't lasted for several years? Am I the ONLY person who's had problems on and off throughout the last two years with his / her Nokia, AND had it replaced twice by Nokia Care, and now that it
-
Order Output should be supressed when all items are rejected
We have a requirement, where when all schedule lines in a sales order are rejected the order confirmation output should be suppressed. This is what we did to achieve it. Using the customer modification structure KOMKBZ3, add a new field ZZ_ALL_SL_REJ
-
Where can I buy "Classic Mode" to play old computer games?
I am looking to buy "Classic Mode" for my Mac. I have had no success with free online software .
-
Recently downloaded new software and now all of my wife's contacts appear in my contacts. How do I change this?
-
Can I get Mavericks removed/replace with Lion?
I'd be willing to pay to get this done. Mavericks won't let me work with Quicken 2007, and Quicken Essentials Mac comes up blank. Mavericks won't let me use my printer, even after downloading/installing "updated" printer driver. No printing. With Ma