California and IMG 1.6

We were scheduled a month ago what's the deal? Anyone know the date it was resheduled to?

take it from me. do not believe any dates that are posted in the past, present and/or future on this forum. Don't look forward to any dates posted. Just wait until it happens you will be much less frustrated.

Similar Messages

  • At the back of iPhone you can see made in california and "F C" logo.. Mine dont have FC logo at the back what this it means?

    at the back of iPhone you can see made in california and "F C" logo.. Mine dont have FC logo at the back what this it means?

    Once in a while the restore process seems to mess up.  What I don't understand is why you would perform a weekly restore.
    At any rate, if you must restore, perform a device reset (settings>general>reset) and then you will have the opportunity to restore from iCloud.  Restore a device whenever it no longer works correctly, not just as a matter of maintenance.  If it ain't broke, don't fix it.

  • SUI file format for California and Ohio

    Hi,
    Please help me on finding SUI file format 2011 for California and Ohio from their state webiste.
    CA - http://www.ca.gov/
    OH - http://ohio.gov/
    Thanks..!!!
    - Rubeena

    Hi,
    Please see below the link for OH SUI format
    http://www.odjfs.state.oh.us/forms/findform.asp?formnum=20125
    regards
    Bhaskar

  • I will travel to California and i need to buy iphone 5s

    I'm travlling to california next friday and i want to buy an i-phone 5s by AT&T with a nano sim card (not wirless) how can i get it from california and how much
    ? could i use it for two weeks then take it egypt ? and also could i buy more than one mobile or it's only one contract for one person ?

    If you buy the phone directly from Apple and pay full price (NOT the contract price from AT&T) AND purchase an unlocked phone, then go to AT&T and get a SIM you can use it in the US and take it to Egypt. However, you will not get LTE (4G) service in Egypt, and if it ever needs to be fixed you will need to bring it back to the US.

  • HT4504 I'm still confused. If I am in California and make a plane reservation NYC to San Francisco, departing at 8 am New York time, and I want iCal, once I get to New York, to still tell me the plane leaves at 8 am, should I set TZS on or off?

    I'm still confused. If I am in California and make a plane reservation NYC to San Francisco, departing at 8 am New York time, and I want iCal, once I get to New York, to still tell me the plane leaves at 8 am, should I set Time Zone Support on or off?  In other words, when I enter a time for an event, I never want iCal to change the time as I have entered it.

    Hi,
    You should have timezone support off to get events to stay in "floating time". I'm not sure what will happen to the events with timezone data already if you turn it off. I would expect iCal to make some attempt to resolve events in different timezones, that is not probably not what you want.
    IMO the only logical thing is if you travel though timezones is to set the timezone and time of the event to the place and time it actiually is, but you say you will not.
    Best wishes
    John M

  • Arch Linux iso and img metalinks

    I've finally created a script to automatically generate metalinks for the current iso and img downloads using the most recent official mirrorlist
    The generated metalinks are currently listed here: http://xyne.archlinux.ca/arch
    I might move the links page around on the site but the metalink directory should not change. If any of the site admins would like to include these on the downloads page, send me an email so we can work out the optimal way of doing it (e.g. I could create a custom page that you could scrape and show you how to update the metalinks via the web interface when mirrorlists/downloads change).
    For anyone not familiar with metalinks, here's an example of how to use one with aria2c:
    aria2c --follow-metalink=mem -j45 -C45 http://xyne.archlinux.ca/metalinks/archlinux-2009.02-ftp-x86_64.iso.metalink
    aria2c should be capable of downloading from the metalink and the torrent simultaneously but I gave up trying to get it to work after a couple of minutes.
    The Firefox add-on "DownThemAll!" can also handle metalinks.
    archlinux-*-all.metalink contains all of the files. Don't use this link unless you either:
    a) really need all of the files
    b) know how to select files from a metalink
    Last edited by Xyne (2009-04-24 22:05:25)

    Xyne wrote:@Dieter@be
    The post about metalinks on pacman-dev reminded me about this thread. The advantage of the metalinks over torrents, even webseeded torrents, is that you don't need a torrent client to download them. You can use DownThemAll (and maybe other add-ons) to download them directly in Firefox, for example.
    exactly, most download apps (FTP clients, non-torrent P2P clients, most download managers, and browsers, with the exception of Opera) don't support torrents directly. and there are many situations where P2P uploading is banned or frowned upon, like corporate/university networks, places with slow uplink, misconfigured hardware, etc...
    torrents are awesome, but they're not a perfect fit in every situation. metalinks give you alternates, failover options, P2P-like features - so if there's any way for a download to complete, it will. there's the slightly added complexity & effort of getting em in place, but once that's automated it's usually pretty helpful.
    here's a good description of the situation:
    http://www.techradar.com/news/computing … ads-611025

  • Receiving emails about a newly set up itunes account that does not belong to me (although has my name). The address used in connection with it seems to be in California and the person likes Justin Bieber - what's going on here?

    Hi. I am receiving emails about a newly set up itunes account that does not belong to me (although has my name). The address used in connection with it seems to be in California and the person likes Justin Bieber (as I now have a receipt for that purchase). It states that it is billed to store credit. (a) I don't want to receive this person's information and (b) I certainly don't want to somehow be charged for it (although it appears, thus far, that I have not been). What's going on?

    i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
    do a true clean install
    reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
    at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
    exit disk utlity
    at menu, choose install OSX
    this time, when it asks for a password just hit continue, it will let you complete without a password
    you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue

  • I bought an iphone 4s from Gamestop in California and I didn't get any icloud info for it. Now I am stuck in the activation screen, any suggestions (no jailbreak)?

    I bought an iphone 4s from Gamestop in California and I didn't get any icloud info for it. Now I am stuck in the activation screen, any suggestions (no jailbreak)?

    Take it back for a refund it is "activation locked" to the original owners Apple ID and password.

  • My weather widget is set to California, and I am on the east coast. Way to reset it?

    For some reason, my weather widget (the slide down screen) is set to Cupertino, California. Problem: I'm in Washington, D.C and there isn't a real reason for it to be in California....
    I updated my phone, so it is the most up to date.
    My locations services is on, and it is set to D.C, so is there any way to fix this problem?
    Thank you so much!

    Sure, bring up the weather widget and select it.  Select "i" at the bottom right corner and turn Local Weather ON

  • Safari says not connected to internet on certain sites when connection is good and IMG[] images don't show up anymore?

    I recently updated to 10.6.8 from 10.5.x and have been having some issues.  First, Safari will say that my computer is not connected to the internet, but it is.  I can be on YouTube, for example, and then try to go to eBay, and it will say not connected to internet, but I can go to Google and it will be fine without doing anything.  Almost like it cannot connect to the server, but the message is that I'm not connected to the internet.  I can turn Airport off and back on and get on most pages that wouldn't open originally.  It's not site-specific.  Sometimes it's Google, Facebook, eBay, YouTube, forums, etc. and other times those same sites work just fine. 
    The next problem, which I feel is related is that IMG[xxx] images won't open some of the time now on forums that have Photobucket and Tinypic IMG codes inserted into threads.  It will just show the blue box with a question mark.  I think that's because my Safari can't open the image hosting websites because sometimes when I click on the blue box to open the link, it says not connected to the internet and Photobucket seems to be one of the regular problem sites. 
    I've tried clearing my cache, reseting Safari, and a few other suggestions on here from similar problems, but I haven't seen a post describing my same issues exactly.  I have not tried Firefox and would prefer to keep using Safari. 

    Try repairing permissions.
    Launch Disk Utility located in HD > Applications > Utilities
    Select the startup  disk on the left then select the First Aid tab.
    Select:  Repair Disk Permissions
    This can take a few minutes and better to not use your Mac while it's running.
    When it's finished, quit and relaunch Safari to test.
    Repairing permmissions helped another user with the same problem > "You are not connected to the internet"...: Apple Support Communities

  • Confirm delete in a report using href and img

    Hi,
    Found lots of references to this for buttons on a page, and a couple of others that are close - but my implementation of it just doesn't work for some reason.
    I'm presenting a user with a long list of items in an sql report, and against each line give them a delete option within the report. They want a confirm delete popup, so I have tried a few variations on:
    select
    '<a onFocus=''if (confirmDelete("Delete?")) location.replace("f?p=&APP_ID.:2:&SESSION.:DEL_EMP:::P2_DEL_EMP_ID:' ||emp_seq_num|| '");''
    href="f?p=&APP_ID.:2:&SESSION.:DEL_EMP:::P2_DEL_EMP_ID:'||emp_seq_num||'"><img src="/i/wdrop.gif"></a>' DEL,
    The message pops up, but the delete doesn't kick in.
    I've tried slight variations according to posts on the forum that result in it deleting even if cancel is selected, and yet others where the cancel and delete work, but if the button is clicked again - the delete just happens without a message.
    Not much hair left on the head at the moment.
    TIA.

    David,
    I have an example here:
    http://apex.oracle.com/pls/otn/f?p=31517:15
    However, this is not working for guest users. The code is on the page.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://htmldb.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • ServletServlet and IMG Tag

    System: WebLogic Server 4.50
              Please look at the followin snippet from one of my servlets:
              out.println("<table cellspacing='10' cellpadding='0' border='0'
              bgcolor='#acdfb9'>");
              out.println("<tr>");
              out.println(" <td><IMG align=top border=0 height=100
              src='header_merch_pic.jpg' width=100>"
              out.println(" <font face='Arial' size='+2'
              color='white'><b><i>Magic</i></b></font>");
              out.println(" </td>");
              When I run this servlet as a registered class, it works fine. However
              when I try to run this guy under
              through the ServletServlet servlet (is that like USA Today today), I get
              an error reported on the server
              which states the following:
              Thu Dec 02 16:00:26 CST 1999:<E> <ServletContext-Servlets> Servlet
              failed with ServletException
              Thu Dec 02 16:00:26 CST 1999:<E> <ServletContext-Servlets>
              javax.servlet.ServletException: No servlet found for PATH_INFO =
              /com/novusnet/mrchsrv/java/MagicBannerServlet/header_merch_pic.jpg
              I'm a little confused since the only place where header_merch_pic.jpg
              appear is in an out.println() call, which is simply output to the
              browser and shouldn't be attempted to be loaded as another servlet. If
              the IMG line is removed, the servlet works, I just can't display the
              graphic. What gives?
              Please help,
              Matt
              

    Let me guess something: you set up your webserver to proxy everything
              under the /com/novusnet/mrchsrv/java directory as a servlet. Since you
              used a relative path for the image, Weblogic is looking there for the
              image and expecting it to be a servlet.
              Try an absolute path to the image.
              Matt Schoaf wrote:
              >
              > System: WebLogic Server 4.50
              >
              > Please look at the followin snippet from one of my servlets:
              > out.println("<table cellspacing='10' cellpadding='0' border='0'
              > bgcolor='#acdfb9'>");
              > out.println("<tr>");
              > out.println(" <td><IMG align=top border=0 height=100
              > src='header_merch_pic.jpg' width=100>"
              > );
              > out.println(" <font face='Arial' size='+2'
              > color='white'><b><i>Magic</i></b></font>");
              > out.println(" </td>");
              >
              > When I run this servlet as a registered class, it works fine. However
              > when I try to run this guy under
              > through the ServletServlet servlet (is that like USA Today today), I get
              > an error reported on the server
              > which states the following:
              >
              > Thu Dec 02 16:00:26 CST 1999:<E> <ServletContext-Servlets> Servlet
              > failed with ServletException
              > Thu Dec 02 16:00:26 CST 1999:<E> <ServletContext-Servlets>
              > javax.servlet.ServletException: No servlet found for PATH_INFO =
              > /com/novusnet/mrchsrv/java/MagicBannerServlet/header_merch_pic.jpg
              >
              > I'm a little confused since the only place where header_merch_pic.jpg
              > appear is in an out.println() call, which is simply output to the
              > browser and shouldn't be attempted to be loaded as another servlet. If
              > the IMG line is removed, the servlet works, I just can't display the
              > graphic. What gives?
              >
              > Please help,
              > Matt
              

  • Configuration of Maintenance Optimizer and IMG-configuration

    Hi!
    I am installing SAP Solution Manager 4.0 and two ERP-systems and would like to ask, whether a suitable detailed documentation about
    Configuring Maintenance optimizer
    IMG-Configuration
    does exist?
    P.S. Besides the document "Step by step Confugaration of Maintenance Optimizer" or .sim-File.
    Thank  you very much indead!
    regards

    Dear Axel,
    Kindly review the URL :
    http://service.sap.com/solman-mopz
    On the first page at the bottom end you would find an PDF for configuration of Maintenance Optimizer and also an SAP Tutor file for the same.
    Follow the steps and you are ready with the optimizer for downloading packages.
    Hope the above information helps.
    Regards
    Amit Devale

  • HTML embeded in Flash and img tag

    I'm currently developing an application in flash, which
    consist of a hand-drawn screen, in which HTML page appears. To
    achieve this I used a TextField with html option. Unfortunately,
    TextFiles show only some simple tags – is there any other way
    to show more complicated ones in Flash CS3 (and AS3)? I have also a
    problem with the <img> tag. Picture loaded via <img>
    doesn’t print from TextField. My printing code attached -
    webpage_txt is control to print. Do you konw why it doesn't print?
    Thanks in advance for help.

    Currently, no, there are only simple HTML tags available.
    Though, FlashPlayer10 promises to have much greater support for
    text, including inline tables, etc.. You may just have to make do
    with what you have for now, and wait for the new player.
    As for your picture woes, I unfortunately am unable to help
    you there, with very little printJob experience myself.

  • Poor quality DVD and img

    Both the burnt DVD and the.img copy have very poor quality when played. It is particularly noticeable on the text which acts as a link to the other parts of the DVD. The preview is fine and the encoder is set to "best quality" ..HELP!

    I'm looking for answers too: Having the best possible dv-quality raw material, I am puzzled that iDVD chooses to only use 1.2 GB of the 4.3 GB available on the DVD - even though I use the "Quality"-mode instead of best performance!
    The loss of quality really is visible - also on tv!
    /Jan
    PB12 1.33 GHz   Mac OS X (10.4.4)   Modified HD Hitachi 7200 rpm 60 GB

Maybe you are looking for