Call BAPI_PO_CHANGE from ME22N and go back with F3
Hello,
could anybody confirm to me if it is technically possible the following process:
- execute ME22N
- call the BAPI_PO_CHANGE from transaction ME22N (through one added button in program SAPLXM06 and screen 0101)
- call BAPI_TRANSACTION_COMMIT
- go back to ME22N (F3)
Thanks !
Hi Nuria,
Yes, it is possible technically.
What are you trying to do? Please explain more in detail.
Regards,
Ferry Lianto
Similar Messages
-
Calling JSP from Forms and going back from JSP to Forms
Hi,
We are calling JSP from Forms 6i using show_document
I'd like to go back to tha calling Form from the JSP.
How can I construct the URL that would lead me back to the same Form and Forms session where the JSP was called from?
Thanks,
ArpadThanks Shay,
works for me too...
Now:
when I use the "Back" button of my IE to go back from JSP to the Forms session, it works for Jinitiator 1.1.8.19, but if I use Jinitiator 1.3 I got hung...
Any ideas how could I make it work from Jinit 1.3?
Thanks again/
Regards,
Arpad -
(i bought iphone 5c 4-5 days back from india and today back button of this phone not working, i am totally dissatisfy with the apple service support. i want replacement.)
Hello i am nitin from india, i purchased a iphone5c because i heard that iphone comes with a great coustmer service, but this statment becomes totally wrong today, when i faced coustmer executive at service center of iphone then he said that i have to check it out and it may be a physical damage, ( how it is possible even i carried this phone with anti shock cover guard and its never fall down from my hand.) the simple thing i know that i want my phone replaced, otherwise it would be a great mistake of my life to purchase an iphone.
Thanks to all apple team for your wonderful service,Welcome to the user to User Technical Support Forum provided by Apple.
For your issue... See here...
Contacting Apple World Wide for Support and Service
http://support.apple.com/kb/HE57
Apple Warranty > http://www.apple.com/legal/warranty/
iPhone Warranty > The warranty is only valid in the country of original purchase... Except for EU Countries... -
Commit work and roll back with simple language and simple example
hi guru
commit work and roll back with simple language and simple exampleHi,
The statement COMMIT WORK completes the current SAP LUW and opens a new one, storing all change requests for the current SAP LUW in the process. In this case, COMMIT WORK performs the following actions:
It executes all subroutines registered using PERFORM ON COMMIT.
The sequence is based on the order of registration or according to the priority specified using the LEVEL addition. Execution of the following statements is not permitted in a subroutine of this type:
PERFORM ... ON COMMIT|ROLLBACK
COMMIT WORK
ROLLBACK WORK
The statement CALL FUNCTION ... IN UPDATE TASK can be executed.
ROLL BACK:
The statement ROLLBACK WORK closes the current SAP-LUW and opens a new one. In doing so, all change requests of the current SAP-LUW are canceled. To do this, ROLLBACK WORK carries out the following actions:
1) Executes all subprograms registered with PERFORM ON ROLLBACK.
2) Deletes all subprograms registered with PERFORM ON COMMIT.
3) Raises an internal exception in the Object Services that makes sure that the attributes of persistent objects are initialised.
4) Deletes all update function modules registered with CALL FUNCTION ...IN UPDATE TASK from the VBLOG database table and deletes all transactional remote Function Calls registered with CALL FUNCTION ... IN BACKGROUND TASK from database tables ARFCSSTATE and ARFCSDATA.
5) Removal of all SAP locks set in the current program in which the formal parameter _SCOPE of the lock function module was set to the value 2.
6) Triggers a database rollback, which also ends the current database-LUW. -
I bought an unlocked iPhone 5s from USA and travel back to my counry but won't work in my country
I bought an unlocked iPhone 5s from USA and travel back to my counry but won't work in my country
Well, there is nothing anyone here can do for you. Did you actually purchase it at an Apple Store, or at another retailer like BestBuy, HH Gregg, a mall kiosk, T-Mobile, AT&T, etc?
The ONLY source for unlocked iPhones in the US is Apple. If you purchased it anywhere other than at an Apple Store, you purchased a locked phone.
You can call AppleCare and give them the serial number of the phone to confirm the status of the lock. -
After reformatting iPod to NTFS and restoring back with iTunes, the player works for two-three weeks and crashes afterward. It then requests to restore it through iTunes. When connected to iTunes, it sees it in the restore mode and also asks to restore the iPod. It happens over and over for the last months. What could be the problem?
iPod Classic 80Gig.
Thanks in advance.Dear planb77
Thanks for a reply. iPod does not support ntfs - you're right. that means it will never work on that. While restoring ipod using iTunes, itunes reformats it no matter what filesystem is there. So the issue is not that. ipod is now on fat32 and it works for a certain period of time, but then crashes and asks to restore through itunes. Resetting/restarting does not help. -
When legally ipad2 with 3G would be available in Thailand? Can I buy it from US and use it with 3G operator in Thailand?
The iPad 2 is available in Thailand now, though I don't know whether you can find one it stock. The iPad 2 continues to be in short supply everywhere in the world. A US iPad with GSM 3G should be able to work with any carrier worldwide that offers GSM service and a suitable data plan. You'll need to be sure you purchase the AT&T version of the iPad if you purchase in the US, NOT the Verizon version which uses a different cell technology.
This has been asked and answered in these forums multiple times already, by the way. A quick search or browse of the forums and you would not have had to wait for a response.
Regards. -
I would like to buy a iPhone 4 unlocked from USA and take it with me to use it in Norway where I live is it gone work there? Thanks Melody
Unlocked means unlocked, so yes.
But, support and namely warranty coverage may not be available for you in Norway or anywhere but in the US with any iPhone purchased in the US, even an unlocked iPhone purchased in the US. -
My iPhone is from Japan and I want to activate it here in the Philippines because I'm living here. I have lost the original SIM from Softbank and replaced it with a new SIM card from Globe. How can I use the SIM card from Globe?
You cannot. The iPhone is locked to Softbank, and only they can unlock it. Problem is that Softbank will NOT unlock the phone, as they do not offer iPhone unlocking.
Buy an iPhone in the Phillipines.
PS Before you go on a rant at Apple, be aware that Apple does NOT unlock phones and they do not set unlocking policies. The carriers (Softbank in this case) set the unlocking policy. -
Unique problem, can get calls only from Airtel and...
Hi Friends, I have a unique problem here and some input on the same.
I can receive incomming calls only from Airtel and no other service providers. I do not know why. I cannot even recieve calls from landline and also cannot get other providers SMSes.
Please help me out in this regard.
I am using Nokia E72 handsetYou may want to check your firewall settings. Go to options-security-firewall. Check to see if it is enabled and the scroll down to exceptions and see if any of those are selected.
-
Calling report from form and after parameter form trigger
Hi, I've also posted to this to the reports forum but because it works from Reports Builder it may be a forms issue which is why I'm x-posting. Apologies.
I have a report that creates a file, desname is set in the after parameter form trigger (it uses one of the parameter values).
The problem is file is not created using the path and filename set in the trigger, the file is created in the bin folder with the name account_by_service_type.txt (account_by_service_type.rdf is the report definition).
If the desname is set in the before parameter form AND a field with the source=desname is added to the parameter form then the file will be created with the correct path and name however it won't have the relevant parameter incorporated into the file name obviously.
I've noticed in other reports that where the desname is being set in the after parameter form that I've had to pass the desname from the form but obviously I cannot do that here either.
Am I missing something obvious?
Regards
SeanHi Frank,
It's WebForms. Below is the code:
-- call from menu item
run_report_object_proc(TRUE,'accounts_by_service_type.RDF',null,FILE,'delimited','paramform=yes');
-- run_report_0bject procedure
PROCEDURE run_report_object_proc (p_screen IN BOOLEAN,
p_report_filename IN VARCHAR2,
p_desname IN VARCHAR2,
p_destype IN NUMBER,
p_desformat IN VARCHAR2,
p_paramform IN VARCHAR2)IS
v_report_id report_object;
v_report varchar2(100);
v_job_id varchar2(100);
v_url varchar2(1000);
rep_status varchar2(20);
hidden_action VARCHAR2(2000) :='';
BEGIN
v_report_id := find_report_object( 'report2');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_FILENAME,p_report_filename);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESNAME,p_desname);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE,p_destype);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESFORMAT,p_desformat);
hidden_action := hidden_action||'&report='||GET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_FILENAME);
hidden_action := hidden_action||'&destype='||GET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_DESTYPE);
hidden_action := hidden_action||'&desformat='||GET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_DESFORMAT);
hidden_action := hidden_action||'&userid='||GET_APPLICATION_PROPERTY(username)||'/'||GET_APPLICATION_PROPERTY(password)||'@'||GET_APPLICATION_PROPERTY(connect_string);
if p_desname is not null then
hidden_action := hidden_action||'&'||p_paramform||'&desname='||p_desname;
else
hidden_action := hidden_action||'&'||p_paramform;
end if;
hidden_action := '/reports/rwservlet?_hidden_server=rserv1'||hidden_action;
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_OTHER, 'pfaction='||hidden_action||' '||p_paramform);
-- SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_OTHER, 'paramform=no');
v_report := run_report_object( v_report_id);
IF p_screen THEN
v_job_id := substr(v_report,instr(v_report,'_',-1)+1);
rep_status:=report_object_status(v_report);
while rep_status in ('RUNNING', 'OPENING_REPORT', 'ENQUEUED')
loop
rep_status:=report_object_status(v_report);
end loop;
if rep_status='FINISHED' THEN
v_url := '/reports/rwservlet/getjobid'||v_job_id||'?server=rserv1';
web.show_document(v_url,'_blank');
else
message(rep_status||' error running report');
end if;
end if;
END;
-- report after parameter form trigger
function AfterPForm return boolean is
begin
:desname := 'c:\service_type_'||:p_service_type||'_'||to_char(sysdate,'DDMMYYYY')||'.xls';
return (TRUE);
end; -
Performance differce calling Procedure from sqlplus and Java
Hi ,
I have one procedure which is called from java application and its called only once from java and the entire process is running from procedure itself.Once its called there is no dependency from java to PL/SQL.Its taking long time from java.But if I execute the same procedure from SQL plus then its running in seconds.Also only one session is running in entire database.
My Oracle version 11g.
Please guide me if you get some thing based on below session event.
This is the session status for running from SQL plus
SID EVENT TOTAL_WAITS TOTAL_TIMEOUTS TIME_WAITED WAIT_CLASS
2191 SQL*Net message from client 954 0 1319633 Idle
2191 direct path read 860 0 702 User I/O
2191 db file sequential read 2605 0 550 User I/O
2191 SQL*Net break/reset to client 24 0 460 Application
2191 SQL*Net more data from client 3 0 159 Network
2191 direct path write temp 214 0 74 User I/O
2191 direct path read temp 314 0 67 User I/O
2191 db file scattered read 78 0 42 User I/O
2191 db file parallel read 71 0 21 User I/O
2191 log file sync 36 0 12 Commit
2191 SQL*Net message to client 955 0 0 Network
2191 Disk file operations I/O 8 0 0 User I/O
2191 events in waitclass Other 15 7 0 Other
This is the session status for running from Java
SID EVENT TOTAL_WAITS TIME_WAITED WAIT_CLASS
1718 SQL*Net message from client 21208 7046039 Idle
1718 direct path read 2742 2327 User I/O
1718 log file sync 3748 1121 Commit
1718 db file sequential read 1533 1082 User I/O
1718 enq: TX - row lock contention 6 423 Application
1718 buffer busy waits 1 100 Concurrency
1718 log buffer space 1 30 Configuration
1718 direct path write temp 92 21 User I/O
1718 direct path read temp 138 16 User I/O
1718 log file switch (private strand flush incomplete) 6 16 Configuration
1718 SQL*Net message to client 21209 2 Network
1718 db file scattered read 2 1 User I/O
1718 SQL*Net more data from client 17 0 Network
1718 Disk file operations I/O 11 0 User I/O
1718 SQL*Net more data to client 1 0 Network
1718 events in waitclass Other 15 0 Other
Sorry I am not able to paste in proper alignment for my plain text.Hi,
you need to find which SQL is running slower, using some tools as dbms_profiler, dbms_hprof, ASH, extended SQL trace and real-time SQL monitor (caution: some of the tools may require Diagnostic Pack License).
Then you need to pinpoint difference in the plans and understand its origin -- post plans here if you need help with that (use tags to preserve formatting).
Best regards,
Nikolay -
Call RFC from ECC and display the values in AET
Hi ALL,
I had an RFC in ECC ( Z_CRM_SPEC_DATA) this should be called into my AET Fields in getter method.
In getter method of tat AET field what code should i write?
Plz help me on this.HI,
1) Call the RFC(Z_CRM_SPEC_DATA) from ECC and display the values as mentioned in below AET fields.
AET FIELDS : zzfld00000M zzfld00000N
Description : Budget Quan Forecast Quan
values : (--5.0)(6.0--
2) (Fetch Budget and Forecast data from ECC ),you would need to pass Material Number(MATNR) as well as Ship to party info to fetch the budget and forecast data as one material may be assigned to 2 or more SH with specific budget and forecast data for each.
Edited by: venkatabharathv on May 23, 2011 2:44 PM
Edited by: venkatabharathv on May 23, 2011 2:49 PM -
MIFI 3G has to be unplugged from power and plugged back in regularly
I have had my MIFI 3G version, for a few years now. I really don't have any complaints with it and have had great internet experience for the entire service. HOWEVER, I have noticed in the last 6 months (maybe more?) that I have had to unplug the power from the card and then plug back in, to reset it. It loses connection or goes "stale" every other day or something close (I haven't kept track, but it's regularly).
Is this a setting? Or if too many devices try to connect at one time, could that "kill it" where it needs reset?Thanks for the confirmation Mike. I figured as much but wanted to make sure there wasn't some setting I didn't know about.
So the setting for "activation" is kinda the same as unplugging and plugging back in the power source?
I can appreciate this cycling need, but would be nice if there was another way for it to "wake" such as a device trying to access it, or etc.
Jason
PS - apparently I have another login and didn't know it. This is Delacombo. -
HP simplesave ca94304 keep data on hard drive from PC and now use with Mac computer
Hi, I've recently purchased a new Apple Macbook Air and I have this HP simplesave ca94304 1 TB Ext Hard drive that I would like to be able to use for backing up my new MacbookAir. I have had this hard drive for a few years and have the backups from my PC formated laptop on it already. How can I keep this information on the hard drive and still back up the macbook Air?
Agree with what Dragon-fur said.
I will add...
There are numerous queries on here where consumers report these drives not being recognized suddenly. Their end of life seams to be coming to pass now.
Once that happens, you cannot retrieve the data because SimpleSave drives are not like a traditional external drive.
Also, if you only have your data backed up on one drive (one backup), you dont have a backup. WHEN that drive fails, your data is gone. A good rule of thumb is to have 3 backups using a combination of different ways to do so.
Good luck.
Maybe you are looking for
-
How can i print my files from mi iphone 5 throught the airport express?
How can i print my files from mi iphone 5 throught the airport express?? i have the last iOS version installed and also the last firmware version of the printer. the printer is already connected to the USB airport express and when i look for printers
-
Multi Selection List...
Hi Everyone, In one of my form i want to put 2 multi selection lists, Like user selecting data from one list and when he clicks button the selected items from the first list moves to the second list. user should also be able to doubl click and select
-
hello I am trying to make a widget contacts list in dashboard through one of my chat programs I use. I just want to be able to see whose online through the widget how can I get my contacts onto the widget, is there anyone who can help me get started?
-
How to handle sql error exception in view object
Guys, I have view object (with rows fetched from a sql query). Say the query in the VO looks like this.. select plsql_fun(c) from dual (Note : the plsql function in the above query can throw an exception in some cases) when the plsql functio
-
New mac user here. How do I get to menus in the Address Book program? I want to import contacts from vcards exported from outlook but I see no menus at all in Address Book when I start it up. TIA