Call barring code in Vietnam

I purchased an unlocked Nokia 5310 from a Nokia store in the Philippines. While i was there I also purchased a Globe SIN card with roaming so that I could use it on my trip in South East Asia. However now that I have arrived in Vietnam it will not let me make any calls (domestic or international). When I try to do so it says "active all barrings". I tried to cancel the call barri9ns with the default password 1234 but it says "request not completed". I visted a couple Nokia stores i\here in Veitnam and they said that only Vietnamese SIN cards will work in Vietnam. Does anybody know if this is true. Or if there is any way that I can fix this. I put quite a bit of money on it before I left the Philippines and I do not want it to go to waste.
Tahnk you,
Zia

28-Mar-2008 08:52 AM
zea2 wrote:
I purchased an unlocked Nokia 5310 from a Nokia store in the Philippines. While i was there I also purchased a Globe SIN card with roaming so that I could use it on my trip in South East Asia. However now that I have arrived in Vietnam it will not let me make any calls (domestic or international). When I try to do so it says "active all barrings". I tried to cancel the call barri9ns with the default password 1234 but it says "request not completed". I visted a couple Nokia stores i\here in Veitnam and they said that only Vietnamese SIN cards will work in Vietnam. Does anybody know if this is true. Or if there is any way that I can fix this. I put quite a bit of money on it before I left the Philippines and I do not want it to go to waste.
Tahnk you,
Zia
Android is correct. We should check if roaming is supported in the countries one visits. As a solution buy local SIM and use it while in Vietnam
If my post has helped you please click the white star on the right

Similar Messages

What is default Call barring code,pin code1,pin co...

I have newly bought new e51.But user guide mention only default device code,not other codes. Anyone please tell me what is default call barring code,pin code 1&2.I have also got advanced device lock already in memory card.But its lock code also not mentioned in user guide.

In case of advanced device when i installed it,it asked me to enter old code if I want to change password.when I selected some folders for lock it ask me the password now to unlock it.But yet I have not set any new password as I do not know old default password. Hey friend,also please tell me default call barring password.

Help! Generating paper report with Bar code for web

Now I am using Oracle 9i AS Release 2 + Report 9i and I try to run the demo paper report "ShippingManifest.rdf" which includes Bar Code inside. But I cannot launch the report successfully. The problem seems the report service cannot call build in package ORA_JAVA. Btw, with the same report, I can run this report on the report bulider without any problem on the same machine.
Actaully, can I launch this demo report from web? If so, how can I includes classpath for the bulid in package?
or I must use JSP report instead?
Thanks & Regards
Louis Lei

tnx. i resolved the problem.
now i have anoyher one:
my report has a CF formula --- OLE2--- some file.doc (Word) (one page :))
in reports 6i it works just fine...
but in oracle apps i can only see the header and not the word doc....
i tried to convert the doc to pdf (because i have pdf as output for my report...) but i still have the same problem....
the word doc is a paramater :p_link : d:\scan\pag1.doc
what should i do to see this in application....
???

Bar Code Font 3 of 9 cause NULL pointer exception in PDF export

I am using CR4E 2.0 update 3 and tried to export a report that includes a text formatted with a barcode font (Code39).
When I export the report to PDF with the Crystal Reports Desinger it works fine.
When I export it in our application it generates a NullPointerException at the following line in my application:
exportStream = (ByteArrayInputStream) doc.getPrintOutputController().export(ReportExportFormat.PDF);
Export failed: java.lang.NullPointerException
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.NullPointerException---- Error code:-2147467259 Error code name:failed
     at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.if(SourceFile:237)
     at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(SourceFile:147)
     at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(SourceFile:128)
     at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(SourceFile:111)
     at com.gehcit.ccc.report.ExportReport.writeExportFile(ExportReport.java:222)
     at com.gehcit.ccc.report.ExportReport.export(ExportReport.java:192)
     at com.gehcit.ccc.report.ExportReport.runExport(ExportReport.java:127)
     at com.gehcit.ccc.report.ExportReport.main(ExportReport.java:582)
Caused by: java.lang.NullPointerException
     at java.io.ByteArrayInputStream.<init>(Unknown Source)
     at com.crystaldecisions.reports.exporters.format.page.pdf.fontembedding.opentype.tables.ControlValueTable.if(SourceFile:58)
     at com.crystaldecisions.reports.exporters.format.page.pdf.fontembedding.opentype.tables.ControlValueTable.<init>(SourceFile:53)
     at com.crystaldecisions.reports.exporters.format.page.pdf.fontembedding.OpenTypeSubsetter.<init>(SourceFile:56)
     at com.crystaldecisions.reports.exporters.format.page.pdf.fontembedding.FontEmbeddingSession.a(SourceFile:352)
     at com.crystaldecisions.reports.exporters.format.page.pdf.fontembedding.FontEmbeddingSession.a(SourceFile:313)
     at com.crystaldecisions.reports.exporters.format.page.pdf.pdflib.r.a(SourceFile:1538)
     at com.crystaldecisions.reports.exporters.format.page.pdf.pdflib.PdfDocumentManager.if(SourceFile:350)
     at com.crystaldecisions.reports.exporters.format.page.pdf.dom.PdfAdvancedDocumentModeller.do(SourceFile:348)
     at com.crystaldecisions.reports.exporters.page.pdf.AdobePDFExporter.finalizeExportJob(SourceFile:235)
     at com.crystaldecisions.reports.formatter.export2.ExportSupervisorEx.if(SourceFile:652)
     at com.crystaldecisions.reports.formatter.export2.ExportSupervisorEx.a(SourceFile:586)
     at com.businessobjects.reports.sdk.requesthandler.ReportViewingRequestHandler.a(SourceFile:636)
     at com.businessobjects.reports.sdk.requesthandler.ReportViewingRequestHandler.int(SourceFile:672)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1942)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:659)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:165)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:527)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:525)
     at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(SourceFile:102)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(SourceFile:523)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:422)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(SourceFile:350)
     at com.businessobjects.sdk.erom.jrc.a.a(SourceFile:54)
     at com.businessobjects.sdk.erom.jrc.a.execute(SourceFile:67)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(SourceFile:716)
     at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(SourceFile:125)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:537)
     at com.crystaldecisions.sdk.occa.report.application.ds.a(SourceFile:186)
     at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(SourceFile:1558)
     at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(SourceFile:337)
     at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.if(SourceFile:223)
     ... 7 more
Is there anything that I did wrong or is it generally not working with CR4E to use a simple barcode font?
When I use ReportExportFormat.MSWord or ReportExportFormat.crystalReports it works fine but unfortunately
out customers insist on PDF. Any help would be appreciated very much.
The bar code font I am using is from http://www.barcodesinc.com/free-barcode-font/
Edited by: Lothar Bernecker on Dec 3, 2009 3:12 PM

I think there's issues with that Barcode TrueType font and Java.
You can try a Java app (such as the sample demo app that comes with Java) and try viewing that font.
You'd need to use a different barcode font.
Sincerely,
Ted Ueda

Use of bar code value in apex

Hi experts,
I am building an employee attendance system in apex.
When an employee enters or leave the office, the bar code reader captures the value (i.e employee id) based on the bar code sticker on employee i-card. So after getting the employee id, I want that value in first item on apex form.
Based on this value a function/procedure should be called which stores employee details (e.g. name, date, time etc) into the table without any manual interaction. Also the value of item should be null/clear after entry in table.
I tried it using windows hooks, but it is not working properly. (e.g. It doesn't fetch the value when computer is locked.)
Is it possible to fetch the value ( employee id) directly into the form item and at the same time insert the values in the database based on the employee id...???
This is just an general overview of how it want to be work. Please provide your valuable suggestions for any other way to implement the same.
Thanks in advance
Chetan

I assume you are just using a generic bar code reader that effectivly acts like a keyboard typing the relevant bar code value?
I really don't think APEX is the right environment to be doing this sort of thing in.
Unless I've misunderstood the hardware you are using though I really think you are going to struggle getting enything to happen when the machine is locked...

International Calls Barred

I am on holiday and have had the Samsung S5 for a few weeks without any problems. I upgarded to the new EE tarrif with roaming minutes and texts as I travel a lot with work. Having arrived on holiday I find I cannot make calls to uk numbers nor to 150 and am redirected to 1407 which is in Spanish only - wonderful idea EE. After dumping 15euros into a public phone I am told to check the setting for Call Barring - Voice Call - International calls to find it is enabled and EE cannot tell me th password but assured me we haved moved forward on the problem (without solving it) - andother great service EE. Can anyone who has experinved this help with the code to disable it please? It is the same on my wife´s handeset where it is enabled too. Thanks in Advance

Sorted! Called EE again and spoke to Eileen who was very cheerful and determined to help me. After she had a couple of conversations with level 2 all she had to do was reset the sim. She called me back after this had been done, about 30 mins, I powered off then on and the tick simply disappeared. So persistence is required, actually seems to be a simple fix if you talk to the right person. Seems to me that some training, or at least a memo, is required for the whole customer service team. Of course, this odd anamoly should not even be there, but you don't know about it until it is too late, but all EE customer services team should be aware and know what to do. Good luck!

Bar code for materials.

Hi Friends,
Our client wants to maintain bar code for the vendor provided material no.s. For vendor materil no.s we are using the old material numbers.so please explain how to use thisbar code for goods reciept, issue etc...please reply....

Hi Prasanna
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes.
- Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
Now you have a barcode printed - what next?
Well there are two options, depending on your business requirements:
- You can use an existing SAP transaction on a regular workstation and get a barcode wedge reader to hook up between the keyboard and the PC. These wedge readers comes in a wand or scanner format. There are even wireless wedge scanners available that allows you to roam a few yards from the workstation to scan a label. This approach is mostly used where you want to prevent human errors in typing in long material, batch or serial numbers in receiving or issuing of material. The problem is that it's just replacing the keyboard input and you are basically locked down in one location and have to bring all the material to that location to process.
- Another solution is to use SAPConsole transactions
or write your own ABAP Dialog programs that will fit onto a barcode enabled wireless handheld terminal and that will follow the business logic as executed on the shop floor.
These programs are highly complex exercises in industrial engineering and ergonomics because of the limited screen sizes and limited ability to accept keyboard input. The user is instructed step-by-step and only scan and push F-keys to interact with the SAP system. Scan, scan, beep, beep, enter - highly automated.
Tips by (Ravikumar Kandikonda : Published on SAP-IMG)
Thanks
Kalpesh

Bar codes in Smart Forms

Hello,
Maybe anyone could provide short guidance how to create SmartForm for fixed assets barcode labeling?

hi,
You need to use a SMARTSTYLE and create a CHAR format and create a BAR Code there and use it in the Smartform.
If you need more info, goto Transaction : SMARTSYLES, do an F4 and in the text area, look for Bar Codes. And see how these Styles are used in the Smartforms.
If somehow you can't preview it properly and the printout didn't show any barcode at all..
First try to use Standard Barcodes like TYPNR or RSNUM etc in the charcter format...
You can preview the output at any moment IF YOU USE THE CORRECT BARCODE FORMAT.
But printer should support barcode printing for taking printout. Otherwise in printout it will print junk values...
If you want to print bar codes from R/3 using device type HPLJ4, HPLJ5, HPLJ5SI or HPLJ4000 on HP LaserJet 4, 5, 6 or 4000 series printers, you need what is known as a SIMM module (IC card). This SIMM module is called "JetCAPS Intelligent Barcode SIMM" and can be obtained for most HP LaserJet 4, 5, 6 and Laser Jet 4000 printers. For more detailed information regarding barcode printers refer to Notes 5196, 121305, 119471
Hope this helps.
PLZ reward Points if helpful.

3D Bar code printing

Hi,
I was asked to print sample documents using 3D Bar code. Does anyone have any idea on this? Any hints would be really helpful.
Thank you,
Chandra

Hi
Do u want it in scripts or smartforms???
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes.
- Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
Now you have a barcode printed - what next?
Well there are two options, depending on your business requirements:
- You can use an existing SAP transaction on a regular workstation and get a barcode wedge reader to hook up between the keyboard and the PC. These wedge readers comes in a wand or scanner format. There are even wireless wedge scanners available that allows you to roam a few yards from the workstation to scan a label. This approach is mostly used where you want to prevent human errors in typing in long material, batch or serial numbers in receiving or issuing of material. The problem is that it's just replacing the keyboard input and you are basically locked down in one location and have to bring all the material to that location to process.
- Another solution is to use SAPConsole transactions
or write your own ABAP Dialog programs that will fit onto a barcode enabled wireless handheld terminal and that will follow the business logic as executed on the shop floor.
These programs are highly complex exercises in industrial engineering and ergonomics because of the limited screen sizes and limited ability to accept keyboard input. The user is instructed step-by-step and only scan and push F-keys to interact with the SAP system. Scan, scan, beep, beep, enter - highly automated.
Only Se71 is used to create a barcode
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Hope this link ll be useful..
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
Check this link
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
http://www.erpgenie.com/products/synappcode.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm
New barcode printing for smartforms
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
http://www.zebra.com/cpgn/pdfs/SAP_universal.pdf
Reward all helpfull answers
Regards
Pavan

Bar code generation in payment transaction

Hi!
When I generate a account payment order, the bar code didn't bring some informations: voucher value and matureness factor.
How can I solve this problem?
Thanks, everybody!
Cesar

Hello,
The regular process is:
1- The Bank send us a file with all payment information;
2- SAP receives that file by a Z-interface that calls the FB01 transaction;
3- When I process the payments in the F110 transaction, some fields of the barcode were missing (amount and a value from brazilian legislation - expiration calculation factor);
Can you help me, please?
Tanks!
Cesar

Bar code in Smartforms

Hi experts
can u plz explain me how to bring bar code in to smartform like invoice credit notes
step by step procedure
regards
Siri

Hai Sireesha
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Details information about SAP Barcodes
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes.
- Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
Now you have a barcode printed - what next?
Well there are two options, depending on your business requirements:
- You can use an existing SAP transaction on a regular workstation and get a barcode wedge reader to hook up between the keyboard and the PC. These wedge readers comes in a wand or scanner format. There are even wireless wedge scanners available that allows you to roam a few yards from the workstation to scan a label. This approach is mostly used where you want to prevent human errors in typing in long material, batch or serial numbers in receiving or issuing of material. The problem is that it's just replacing the keyboard input and you are basically locked down in one location and have to bring all the material to that location to process.
- Another solution is to use SAPConsole transactions
or write your own ABAP Dialog programs that will fit onto a barcode enabled wireless handheld terminal and that will follow the business logic as executed on the shop floor.
These programs are highly complex exercises in industrial engineering and ergonomics because of the limited screen sizes and limited ability to accept keyboard input. The user is instructed step-by-step and only scan and push F-keys to interact with the SAP system. Scan, scan, beep, beep, enter - highly automated.
Barcode Standard
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Thanks & regards
Sreenivasulu P

How to find bar codes and mails to send clients in smartforms

HI friends,
How to find bar codes in smartforms and also how to send mail to the client. I have developed one object in smartforms, but i don't know how to send maill to the client. Pls help me........................
Thanks in Advance.
Saradhi.

Hi!
Here is the code to send the Smartform to mail as PDF attachment.
*& Report ZTEST_PDF_MAIL
REPORT ZTEST_PDF_MAIL.
Internal Table declarations
DATA: I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,
I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
WA_OBJHEAD TYPE SOLI_TAB,
W_CTRLOP TYPE SSFCTRLOP,
W_COMPOP TYPE SSFCOMPOP,
W_RETURN TYPE SSFCRESCL,
WA_DOC_CHNG TYPE SODOCCHGI1,
W_DATA TYPE SODOCCHGI1,
WA_BUFFER TYPE STRING, "To convert from 132 to 255
Variables declarations
V_FORM_NAME TYPE RS38L_FNAM,
V_LEN_IN LIKE SOOD-OBJLEN,
V_LEN_OUT LIKE SOOD-OBJLEN,
V_LEN_OUTN TYPE I,
V_LINES_TXT TYPE I,
V_LINES_BIN TYPE I.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZTEST'
IMPORTING
FM_NAME = V_FORM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
W_CTRLOP-GETOTF = 'X'.
W_CTRLOP-NO_DIALOG = 'X'.
W_COMPOP-TDNOPREV = 'X'.
CALL FUNCTION V_FORM_NAME
EXPORTING
CONTROL_PARAMETERS = W_CTRLOP
OUTPUT_OPTIONS = W_COMPOP
USER_SETTINGS = 'X'
IMPORTING
JOB_OUTPUT_INFO = W_RETURN
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I_OTF[] = W_RETURN-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
IMPORTING
BIN_FILESIZE = V_LEN_IN
TABLES
OTF = I_OTF
LINES = I_TLINE
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
ENDIF.
LOOP AT I_TLINE.
TRANSLATE I_TLINE USING '~'.
CONCATENATE WA_BUFFER I_TLINE INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
I_RECORD = WA_BUFFER.
APPEND I_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH: I_RECLIST,
I_OBJTXT,
I_OBJBIN,
I_OBJPACK.
CLEAR WA_OBJHEAD.
I_OBJBIN[] = I_RECORD[].
Create Message Body Title and Description
I_OBJTXT = 'test with pdf-Attachment!'.
APPEND I_OBJTXT.
DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
READ TABLE I_OBJTXT INDEX V_LINES_TXT.
WA_DOC_CHNG-OBJ_NAME = 'smartform'.
WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
WA_DOC_CHNG-SENSITIVTY = 'F'.
WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
CLEAR I_OBJPACK-TRANSF_BIN.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
I_OBJPACK-BODY_NUM = V_LINES_TXT.
I_OBJPACK-DOC_TYPE = 'RAW'.
APPEND I_OBJPACK.
Attachment (pdf-Attachment)
I_OBJPACK-TRANSF_BIN = 'X'.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
READ TABLE I_OBJBIN INDEX V_LINES_BIN.
I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
I_OBJPACK-BODY_NUM = V_LINES_BIN.
I_OBJPACK-DOC_TYPE = 'PDF'.
I_OBJPACK-OBJ_NAME = 'smart'.
I_OBJPACK-OBJ_DESCR = 'test'.
APPEND I_OBJPACK.
CLEAR I_RECLIST.
I_RECLIST-RECEIVER = '[email protected]'.
I_RECLIST-REC_TYPE = 'U'.
APPEND I_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
If you want to send some text as Body of the Mail then follow this once
when u r callin the FM'SO_NEW_DOCUMENT_ATT_SEND_API1'.. points to remember
1.u have to pass the body of content in table CONTENTS_TXT(ia m using I_OBJBIN) (each line a record) then. suppose i have appended 11 records to the table CONTENTS_TXT .
2.PACKING_LIST(iam usign I_OBJPACK) table u ahve to append a redord as follows
I_OBJPACK-TRANSF_BIN = ' '.
I_OBJPACK-HEAD_START = 000000000000001.
I_OBJPACK-HEAD_NUM = 000000000000001.
I_OBJPACK-BODY_START = 000000000000002
I_OBJPACK-BODY_NUM = 000000000000010.
I_OBJPACK-DOC_TYPE = 'RAW'.
append I_OBJPACK-.
by the above code system treat the first line in table I_OBJBIN as header and the 2nd line to 10 lines tread as body.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
Regards
Tamá

MPN Bar code scanning

Hi All,
We do bar code scanning at the time of GR. We are planning to use HERS material type but the problem is HERS material type is not having EAN number field, please guide how to do this.
Thanks and Regards
Pavan

Most bar code readers have either an RS232 interface or are so-called 'wedge' devices which means they sit between a PC keyboard and the PC and insert characters from the barcode as if they had been typed. In both cases the decoding is done by the reader and all the user sees are ASCII strings.
If you need to extract the codes from video images, I suggest a good book on image processing nd the ISO spec. for the barcode in question.

Customized Bar Code Scanning

Hi All,
Did any one use the 'Customized Bar Code Scanning for one-shot scan of multi-fields?
Can I populate any field in mobile screen by using the 'Customized Bar Code Scanning and Java Call Out?
Best Regards,
Ami Ben-Dror.
[email protected]

Have you found solution for your questions?

Bar Code legibility on IPhone4

I used my 3GS to display a bar code that is read by airport check in kiosks and club memberships, etc. This was helpful as didn't need to carry along paper or club cards. To date, all of the scanners that I have tried to use with the IPhone4 will not read the bar code. How can this be rectified ?

wonder if the glass reflects too much. Soon Power Support will have their screen protectors out. I ordered one they call HD anti-glare. It's supposed to be anti-glare, but still not lose much resolution for HD displays.

Call barring code in Vietnam

Similar Messages

Maybe you are looking for