CALL BSP from ABAP report

I want to execute a BSP from ABAP report. The BSP is the standar CRM CASE MANAGEMENT BSP.
I have a CRM CASE list in ABAP report and when I make double-click on one case i want to call BSP to show this case. I don't want to execute the GUI transaction CRMD_CASE. I need to execute the BSP.

Hello Ivan,
To call the BSP from the ABAP report following thread will be helpful for you.
Call BSP from SE38 Program ?
Regards
Aashish Garg
Message was edited by:
aashish garg

Similar Messages

Calling BSP from abap program by interfacing EP

Dear Friends...
I am cslling a BSP... from an ABAP program... for that I have used this class and also a function module to ckeck.. actually from the abap program it invoks the BSP page very nicely and as my logic for invoking the BSP is a part of the Business Object and it is associated with the Enterprise portal so... when i reach the ep and trigger that business object to instantiate the BSP page from my calling logic of abap... it goes to the ITS and port 80 or something and didnt produce the BSP.. and only the blank screen was there...kindly help me how i am supposed to instantiate the BSP from properly from ABAP by interfacing the EP... my code is given below...
data :
lv_url type string.
concatenate
'http://sapdevbp.sbic.co.za:8041/sap(bD1lbiZjPTIwMA==)'
'/bc/bsp/sap/z_updatemng/bp.htm?bpid=' object-key-businesspartnerid
into lv_url.
call method cl_gui_frontend_services=>execute
exporting
document = lv_url
exceptions
others = 1.
please help....
me...
regards
Naim

hi ,
you can try using FM CALL_BROWSER in your report(ABAP code)to call bsp,like
data url(200) type c.
url = 'http://<server>.<domain><port>:'.
concatenate url '/sap/bc/bsp/sap/' into url.
concatenate url 'your_bsp_app_name/your_start_page.bsp' into url.
concatenate url '?sap-user=<userid>' into url.
concatenate url '&sap-password=<passowrd>' into url.
CALL FUNCTION 'CALL_BROWSER'
EXPORTING
    URL                          = url
   WINDOW_NAME                  = ' '
   NEW_WINDOW                   = ' '
   BROWSER_TYPE                 =
   CONTEXTSTRING                =
EXCEPTIONS
   FRONTEND_NOT_SUPPORTED       = 1
   FRONTEND_ERROR               = 2
   PROG_NOT_FOUND               = 3
   NO_BATCH                     = 4
   UNSPECIFIED_ERROR            = 5
   OTHERS                       = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
For this to work you have to enable SSO on your server.
you can check if it is enabled or not by runnning the BSP application "SYSTEM" ,page "SSO2TEST.htm" .
Follow the instructions on the page for testing.
This may not be a great way as your userid password are passed via URL,still it works
Cheers!

IP - Is it possible to call exit planning function from ABAP Report..

Hi All,
Greetings.
Is it possible to call exit planning function from ABAP Report (t-code SE38) ? Or I mean is not limited only to be called from ABAP Report, perhaps from BSP / Web-Dynpro / Function Module.
If somebody here has been doing it before, I'm keen to ask to kindly share it. Particularly how to call and transfer data to that exit function.
Or if somebody has done in BPS, appreciate if it can be shared too .
Thanks a lot and have a good day,
Best regards,
Daniel N.

Hi.
You can achive this as suggested by Mattias in your previous post.
Lets say you have next data structure:
CostCenter | Amount | PercentForDistibution |
Create input ready query in this format. Restrict cost center by variable type range.
Create WAD with analysis item.
When you run web page you enter range of cost centers (lets say you will enter 101004 to 101010).
I assume you have data only for 101004 in your cube (lets say 1000).
You will see only one record in your webpage.
CostCenter | Amount | PercentForDistibution |
101004       | 1000     | NOTHING
When you create WAD in analysis item properties set "NUMBER_OF_NEW_LINES" to lets say 1 (so in WAD you will see always one blank line for entering new data).
Just add 6 new records:
CostCenter | Amount   | PercentForDistibution |
101005       | NOTHING| 10
101006       | NOTHING| 30
101007       | NOTHING| 20
101008       | NOTHING| 25
101009       | NOTHING| 5
101010       | NOTHING| 10
Then run planning FOX function like this:
FOREACH Z_COST_CENTER.
IF {Amount, Z_COST_CENTER} <> 0
Z_AMNT_TO_DISTRIBUTE = {Amount, Z_COST_CENTER}.
ENDIF.
ENDFOR.
FOREACH Z_COST_CENTER.
IF {PercentForDistibution Z_COST_CENTER} <> 0.
{Amount, Z_COST_CENTER} = Z_AMNT_TO_DISTRIBUTE * {PercentForDistibution Z_COST_CENTER}.
ENDIF.
ENDFOR.
It is not perfect FOX, but as an idead, it should work.
Regards.

Calling and manipulating data on an Interactive Adobe form from ABAP report

Dear All,
Can you please tell me how to call an interactive adobe from from a custom adobe form?
If so how can we pass and receive data between the interactive adobe form and the abap report program?
Thank you.
Regards,
Prosenjit.

Hi,
It is possible to call an Interactive Adobe form from ABAP report and pass data into the form. If you search the forum, you will get many threads explaining the process. Let me know if you have any specific questions on this.
Regards,
Sanoosh

Calling custom Infotype method from ABAP report

Hi Experts,
I am working on an application where i need to call a method of a custom defined infotype.
I have done this -->
1. Create a custom infotype 9111
2. SAP creates a class of that infotype ZCL_HRPA_INFOTYPE_9111
3. Inside this method there are few inherited method which provide me functionality of insert , update , delete
i want to call methods IF_HRPA_INFTY_BL~MODIFY,
IF_HRPA_INFTY_BL~INSERT
However when i call these method from abap report this method does not work.
where as when i try to insert an entry using PA30 transaction it works.
Does anyone know why does this happen and what is the solution?
Regards,
Ashish Shah

Hi,
This is the code we are using. Just calling the read and modify methods of the check class. Very simple actually .. we just want once update/insert to work but it does not.
<CODE>
REPORT ZTESTRAD_WD.
FIELD-SYMBOLS <p9106> TYPE p9106.
DATA : infty_container_tab TYPE hrpad_infty_container_tab ,
       message_list        TYPE REF TO cl_hrpa_message_list,
     w_ok type boole_d ,
     ref_class TYPE REF TO ZCL_HRPA_INFOTYPE_9106,
     container        TYPE REF TO if_hrpa_infty_container,
     it9106_container TYPE REF TO cl_hrpa_infotype_container,
     p9106_ref        TYPE REF TO data,
    busilog type ref to if_hrpa_masterdata_bl.
CREATE OBJECT message_list.
TRY.
        CREATE OBJECT ref_class
          EXPORTING
            tclas = 'A'
            infty = '9106'.
      CATCH cx_hrpa_violated_assertion .
        write :/ 'Error during initialization'.
ENDTRY.
call method cl_hrpa_masterdata_bl=>get_instance
   importing
     masterdata_bl = busilog.
TRY.
CALL METHOD ref_class->IF_HRPA_INFTY_BL~read
EXPORTING
    tclas           = 'A'
    pernr           = 'XXXXXXXX'
    infty           = '9106'
    begda           = sy-datum
    endda           = sy-datum
    no_auth_check   = abap_true
    message_handler = message_list
IMPORTING
    container_tab   = infty_container_tab
    is_ok           = w_ok.
CATCH cx_hrpa_violated_assertion .
   WRITE :/ 'Infotype could not be read'.
ENDTRY.
*" Fill the local structure with container data:
loop at infty_container_tab into container.
    it9106_container ?= container.
    TRY.
    CALL METHOD it9106_container->primary_record_ref
      IMPORTING
        pnnnn_ref = p9106_ref.
     CATCH cx_hrpa_violated_assertion .
    ENDTRY.
    ASSIGN p9106_ref->* to <p9106>.
    write :/ <p9106> .
endloop.
*" Just change some field values of the record
<p9106>-C1name2 = 'Test name'.
<p9106>-C2name2 = 'Test name 2 3 4'.
data : return TYPE BAPIRETURN1,
       return1 TYPE BAPIRETURN1.
*CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
EXPORTING
   number        = <p9106>-pernr
IMPORTING
RETURN        = return1
*PERFORM do_nothing(sapfp50p).
The container itself is modified
container ?= it9106_container->modify_primary_record( <p9106> ).
CREATE OBJECT message_list.
the invocation - errors are always fatal !!!
DATA : lx_exception TYPE REF TO cx_root,
         update_mode type HRPAD_UPDATE_MODE,
         massn type massn,
         massg type massg.
TRY.
      CALL METHOD ref_class->IF_HRPA_INFTY_BL~MODIFY(
        EXPORTING
           old_container =                   it9106_container
           massn                          = massn
           massg                         = massg
           update_mode =                 update_mode
           no_auth_check =                   'X'
           message_handler =                 message_list
        IMPORTING
           is_ok =                           w_ok
        CHANGING
           container =                       container
    CATCH cx_hrpa_violated_assertion INTO lx_exception.
      RAISE EXCEPTION TYPE cx_wd_no_handler
        EXPORTING previous = lx_exception.
ENDTRY.
</CODE>
I have also tried by instantiating the cl_hrpa_masterdata_bl and then calling the methods on that object...... makes no difference.
I used this link to proceed with the modifications:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/21d2254bba2bebe10000000a1553f7/frameset.htm
The funny thing is that the WHOLE logic executes without any error messages or dumps or anything. I have now debugged almost every line of code that these methods call. PA30 works just fine. HR_INFOTYPE_OPERATION does not .. that's a whole differnt story.

Calling a proxy from ABAP Report

Hi All,
Can any one gimme some idea about calling a XI proxy from ABAP Report.
I need to gather data in my internal table and after that i need to trigger a proxy which is going to do a outbound processing.
Thanks in advance.
Tnx,
Joe.

Hi Meetjoe,
We have to design the required interface in PI ,that is used to hold the report data when tigerred a proxy and generate the proxy based on the interface if the Proxy is based on the Outbound side its called client proxy or if the proxy is genereated on Inbound interface we call it server proxy.
need to gather data in my internal table and after that i need to trigger a proxy which is going to do a outbound processing.
In your case its gonna be the client proxy refer the follwing links for your better understanding
For concepts on Proxies:
http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm
To enable Proxy connections:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d69314-1be0-2b10-11ab-8045021f0c3a
Smaple scenarios on Proxy:
Proxysettings /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ABAP Server Proxy /people/siva.maranani/blog/2005/04/03/abap-server-proxies
ABAP Client Proxy /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Thanks,
Ram.

Is it possible to call website from ABAP Program?

Hi Experts,
       Is it possible to call website from ABAP Program?
It is very Urgent Help me.
Regards,
Ashok.

Hi,
Check the following program:
REPORT ZURL NO STANDARD PAGE HEADING.
DATA: BEGIN OF URL_TABLE OCCURS 10,
L(25),
END OF URL_TABLE.
URL_TABLE-L = 'http://www.lycos.com'.APPEND URL_TABLE.
URL_TABLE-L = 'http://www.hotbot.com'.APPEND URL_TABLE.
URL_TABLE-L = 'http://www.sap.com'.APPEND URL_TABLE.
LOOP AT URL_TABLE.
SKIP. FORMAT INTENSIFIED OFF.
WRITE: / 'Single click on '.
FORMAT HOTSPOT ON.FORMAT INTENSIFIED ON.
WRITE: URL_TABLE. HIDE URL_TABLE.
FORMAT HOTSPOT OFF.FORMAT INTENSIFIED OFF.
WRITE: 'to go to', URL_TABLE.
ENDLOOP.
CLEAR URL_TABLE.
AT LINE-SELECTION.
IF NOT URL_TABLE IS INITIAL.
CALL FUNCTION 'WS_EXECUTE'
       EXPORTING
            program = 'C:\Program Files\Internet Explorer\IEXPLORE.EXE'
            commandline     = URL_TABLE
            INFORM         = ''
          EXCEPTIONS
            PROG_NOT_FOUND = 1.
IF SY-SUBRC <> 0.
     WRITE:/ 'Cannot find program to open Internet'.
ENDIF.
ENDIF.
Regards,
Bhaskar

Create EJB and call it from ABAP

Hi all,
I have written a stand-alone-Java application, which should be converted into a web application, which has no gui.
This application should be triggered by a abap-program.
Following questions, do I have to write a servlet and a ejb or is it possible to call the ejb directly from the abap-program?
What do I have to do make an outbound call from abap?
Thank you for your support.
Kind regards, Patrick.

Hi.
You can call the EJB directly from Abap. XI uses this functionality extensively.
Follow these steps:
1) Deply the bean on the java stack.
2) You now need to setup a RFC destination in the JCO RFC Provider service in the j2ee visual adminstrator. Point the Repository section to the application server you want to run the Abap reort on. When you do this the j2ee engine will register itself as a possible RFC destination on this application server.You can choose your own program id...
3) You then need to goto tran sm59 on the app server where the Abap report is going to run and setup a connection of tcp type to the j2ee machine. Specify the same program id you used in step in the technical settings.
4) Then just use the bean name when you do the rfc call in the abap report.
Hope this helps if U have not done it yet.

How to create .csv file from ABAP report

Hi
We have a requirement to generate .csv file from abap report.
Currently user saves data from abap report to spreadsheet(.xls format) in desktop. Then opens excel file and save as .csv format. Need option to save directly in .csv format instead of .xls format.
Please let me know, if there is any standard function module available to create .csv file.
Regards
Uma

I tried with your code it's going to dump
REPORT ZTEMP101 message-id 00.
tables: lfa1.
types: begin of t_lfa1,
      lifnr like lfa1-lifnr,
      name1 like lfa1-name1,
      end of t_lfa1.
data: i_lfa1 type standard table of t_lfa1,
      wa_lfa1 type t_lfa1.
types truxs_t_text_data(4096) type c occurs 0.
data: csv_converted_table type table of TRUXS_T_TEXT_DATA.
select-options: s_lifnr for lfa1-lifnr.
select lifnr name1 from lfa1 into table i_lfa1
       where lifnr in s_lifnr.
CALL FUNCTION 'SAP_CONVERT_TO_CSV_FORMAT'
EXPORTING
   I_FIELD_SEPERATOR          = ';'
         I_LINE_HEADER              =
         I_FILENAME                 =
         I_APPL_KEEP                = ' '
TABLES
    I_TAB_SAP_DATA             = I_LFA1
CHANGING
   I_TAB_CONVERTED_DATA       = csv_converted_table
EXCEPTIONS
   CONVERSION_FAILED          = 1
   OTHERS                     = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE                  = ' '
CODEPAGE                      = ' '
   FILENAME                      =
   'C:\Documents and Settings\ps12\Desktop\Test folder\exl.cvs'
FILETYPE                      = 'DAT'
MODE                          = ' '
WK1_N_FORMAT                  = ' '
WK1_N_SIZE                    = ' '
WK1_T_FORMAT                  = ' '
WK1_T_SIZE                    = ' '
COL_SELECT                    = ' '
COL_SELECTMASK                = ' '
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                    =
TABLES
    DATA_TAB                      = csv_converted_table
FIELDNAMES                    =
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_WRITE_ERROR              = 2
INVALID_FILESIZE              = 3
INVALID_TYPE                  = 4
NO_BATCH                      = 5
UNKNOWN_ERROR                 = 6
INVALID_TABLE_WIDTH           = 7
GUI_REFUSE_FILETRANSFER       = 8
CUSTOMER_ERROR                = 9
OTHERS                        = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
my version is 4.6c

Call tcode from alv report and passing group of values

hi all .
i want to call tcode from alv report and passing an internal table or group of values to a selection option of that t code ? how
ex. passing group of GL to fbl3n and display the detials of all .
thank you

Dear,
You have done a small mistake
--> rspar_line-option = 'EQ'.
rspar_line-HIGH = PDATE-HIGH.
u r passing "high" value and in "option u r passing "EQ" so how it will work!!!
So if u r passing only 1 date or more dates like 01.01.2010 , 15.02.2010 , 10.03.2010 then pass
rspar_line-selname = 'SO_BUDAT'.
rspar_line-kind = 'S'.
rspar_line-sign = 'I'.
rspar_line-option = 'EQ'.
rspar_line-LOW = PDATE-HIGH.
APPEND rspar_line TO rspar_tab.
or if u r passing low & high date means in range like 01.01.2010 to 30.01.2010, then pass
rspar_line-selname = 'SO_BUDAT'.
rspar_line-kind = 'S'.
rspar_line-sign = 'I'.
rspar_line-option = 'BT''.
rspar_line-LOW = PDATE-LOW.
rspar_line-HIGH = PDATE-HIGH.
APPEND rspar_line TO rspar_tab.
try above code , hope it helps...
i think u cannot use "call transaction using bdcdata" in ur case bcoz as u said in ur 1st post u want to display the details of all but still if u want to use then u should pass all parameters in loop.
PROGRAM
DYNPRO
DYNBEGIN
FNAM
FVAL
ex:-
LOOP AT GT_TEMP INTO GS_TEMP.
CLEAR bdcdata_wa.
bdcdata_PROGRAM = 'SAPXXXX'.
bdcdata_DYNPRO = '1000'.
bdcdata_DYNBEGIN = 'X'.
bdcdata_wa-fnam = '''.
bdcdata_wa-fval = ''.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_PROGRAM = ''.
bdcdata_DYNPRO = ''.
bdcdata_DYNBEGIN = ''.
bdcdata_wa-fnam = 'SD_SAKNR'.
bdcdata_wa-fval = GS_TEMP-GLACCOUNT.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_PROGRAM = ''.
bdcdata_DYNPRO = ''.
bdcdata_DYNBEGIN = ''.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = 'XXX'.
APPEND bdcdata_wa TO bdcdata_tab.
ENDLOOP.
try above code if u r using call transaction...
Edited by: mihir6666 on Jul 9, 2011 3:10 PM
Edited by: mihir6666 on Jul 9, 2011 3:11 PM
Edited by: mihir6666 on Jul 9, 2011 3:13 PM

How can I print PDF attachments from ABAP report in transaction ME23N?

Hi,
Users attach PDF files using "services for objects" in transaction ME23N.
How can I print the PDF attachments from ABAP report ?
Thanks in advance,,

Hi,
check this link,this might help you to solve your problem
/people/thomas.jung3/blog/2005/04/28/setting-up-an-adobe-writer-for-abap-output
Regards
Kiran Sure

Call java from ABAP

JCo connectivity is used to call RFCs from Java. can i call Java from abap?
thanks in advance.....
regards,
Sundararamaprasad

Hi Sundar ,
This link will surely give u an idea about calling java fro ABAP using Jco.
http://www.thespot4sap.com/Articles/SAP_Netweaver_Java_Connector.asp
regards,
aravindh.

Start BPM process from ABAP report. Need some investigations.

Hi there!
I have to start a BPM process from ABAP report. I found an article http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d75b45-7fef-2b10-bc8e-c6012e0a9457?QuickLink=index&overridelayout=true and have done everything it describes but the process doesn't start.
What I've done:
1) Created a service proxy in SE80.
2) Created a logical port in SOAMANAGER.
3) Write a code to start a WebService in ABAP Report.
But when I start a program nothing happens, no errors.
What analysis I did:
1) See logs and traces in SOAMANAGER - there is nothing appears after I start the report.
2) Tried to test connection to my WebService in SM59 - the connection works, but it use a POST method instead of GET:
Error: com.sap.engine.services.webservices.espbase.server.additions.wsa.WSAddressingException: com.sap.SOA.wsr.030104 - Expected request method POST. Found GET.
But I think it is OK and from the report it use a right method.
3) Tried to delete a logical port - the error of communication problem appears. So it means that all settings are right.
4) No logs in NWA logs
My thoughts - if there is not any errors and no result, it can be because the user authorization. E.g. it tried to start a process by a user who doesn't have SAP_BPM_SuperAdmin role. But I can't find a way how to check what really happens. So I want to ask for a help, colleagues:).

Dear Kirill Zhuklinets,
Can you share your solution as i am facing the same error while trying to consume BPM webservice from SRM ECC
Error Message from SRM ECC :
Exception occurred in communication framework:Error in HTTP Framework:405Method Not Allowed
Log from BPM Web service
Error: process()
[EXCEPTION]
com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException: com.sap.engine.services.webservices.espbase.server.additions.wsa.WSAddressingException: com.sap.SOA.wsr.030104 - Expected request method POST. Found GET.
Please share your solution..
Regards,
Yasin

Calling BSP from EBP

Hi ,
Has anybody called BSP page from EBP/ITS application ?
How can I call BSP from ITS ?
Thanks & Regards,
Sachin S M

Hi Sachin,
the easiest way is to call the BSP as a "catalog"
Just publish your BSP, then you may find under tab properties the copmplete URL for your BSP Application.
Then just define a catalog in spro
"Enterprise Buyer->Master Data->Define Catalogs"
where you define a "catalog" with the URL under catalog application call structure.
Result:
You should find an entry under your tab caltalogs with the description from your entry made in the customizing.
Regards
Andreas

Configurational settings for calling HTTP from ABAP

Hi,
I need to call HTTP from ABAP.
Other than ABAP code, what configurational settings (and functional settings, if any) I need to do for this scenario..
Please help...
Thanks,
Shivaa...
Moderator message - Duplicate post locked
Edited by: Rob Burbank on May 7, 2009 3:44 PM

Hi All,
I have a problem to pass a file.txt in a parameter of a web service.
Iam using CL_HTTP_CLIENT and I am passing the parameters (user, password and file):
clear wa_form.
wa_form-name = 'user'.
wa_form-value = '33333333333'.
append wa_form to it_form.
clear wa_form.
wa_form-name = 'password'.
wa_form-value = '11111111'.
append wa_form to it_form.
clear wa_form.
wa_form-name = 'file'.
wa_form-value = data. ---> "data" is a type string with the data of the file.txt.
append wa_form to it_form.
r_client->request->set_form_fields( fields = it_form ).
I have not problem with the user and password parameters.
Thank.

CALL BSP from ABAP report

Similar Messages

Maybe you are looking for