Call Button Greyed Out After A Third Participant Is Added to The Conversation in Office Communicator 2007 R2

Hi there,
I have a problem with the office communicator. I'm able to make a call to one party without any problems. The issue occurs when I add two or more parties into the conversation. The call button will be greyed out and Im unable to make a call.
I've uninstalled and reinstalled the OCS but the problem still persists.
Appreciate if anybody could help.
Regards,
Vinod

Agree with Anthony.<o:p></o:p>
You can check that by initialing a audio meeting.Then check if the call button grays out.<o:p></o:p>
Lisa Zheng
TechNet Community Support

Similar Messages

TS3367 decline facetime call button greyed out

My daughter said she got a facetime call from someone she didn't know on her iPod touch. She had to ignore the call as the decline button was greayed out. Is this a bug? Also is there some way to manage privacy on facetime, e.g. only contacts can facetime her?

Agree with Anthony.<o:p></o:p>
You can check that by initialing a audio meeting.Then check if the call button grays out.<o:p></o:p>
Lisa Zheng
TechNet Community Support

Daq Solutions Button Greyed out after reinstall

Problem: Purchased new NI PCI board (not sure the # now) and it came with NI-Daq 7.2 with it. I went to install it and found out it doesn't install with Windows95. Not that big of deal, needed to upgrade anyway. So, I installed a newer Pentium3 with Windows 2000 and installed all the drivers for the 2 PCI boards we use. Then I installed Labview 6i. After that I tried to install NI-Daq 7.2 and found out Labview installs an older version so I removed Labview completely, Installed NI-Daq 7.2, then reinstalled Labview 6i without the older NI-Daq verion that comes with it. Now when I load up Labview the "Daq Solutions" button is greyed out. I completely uninstalled NI-Daq and Labview again, reinstalled just labview with its olde
r (6.8) version of NI-Daq and still have the same problem. I searched here and didn't see any other solutions to this problem other than reinstall the software. I have done that 4 times now to no avail. Any other help?

Hendry,
First of all, what is the model of your PCI data acquisition board? Depending upon your board model, you may want to use NI-DAQ 7.0, since that will allow you to automatically install support for LabVIEW 6.i. NI-DAQ 7.2 should work with LabVIEW 6.i, but you may have to manually copy some files to appropriate locations. With your current installation, does your board show up in MAX? If so, can you run any of the data acquisition examples that ship with LabVIEW?

PC Suite: Call Button greyed out

Hi,
I am using Windows XP, the Bluetooth Connection and the latest version of the PC Suite.
I am trying to call my contacts using the PC Suite and my mobile phone the Nokia E50. Although it is capable to do this (according the nokia website) the call button is grey and without function. Bluetooth connection is available and stable, also the E50 Modem is working via Bluettooth using the test Query available in the Device Manager.
What can I do to enable this feature!
Thank you in advance
T.

Sorry,
I forgot to add the information from the PC-Suite:
PC Connectivity Solution:
Version 10.50.2.0
Nokia Connectivity Cable Driver:
Version 7.1.36.0
Operating system:
Microsoft Windows XP 32-bit Edition, Service Pack 3
Language: English
Language for non-Unicode programs: Deutsch
Detected Internet browsers:
- Microsoft Internet Explorer 8.0 (Default browser)
- Mozilla Firefox 3.6
Detected Bluetooth stacks:
- Microsoft (Version: 5.1.2600, Build: 5512)
- Broadcomm (Version: 5.5.0, Build: 9700)

Hibernate button greyed out after Windows XP reinstallation

I recently reinstalled Windows XP in my M35X, one thing Ive noticed is that the hibernate button (which was perfectly functional before) has greyed out and I dont have that option anymore. Any help? Thanx

Hendry,
First of all, what is the model of your PCI data acquisition board? Depending upon your board model, you may want to use NI-DAQ 7.0, since that will allow you to automatically install support for LabVIEW 6.i. NI-DAQ 7.2 should work with LabVIEW 6.i, but you may have to manually copy some files to appropriate locations. With your current installation, does your board show up in MAX? If so, can you run any of the data acquisition examples that ship with LabVIEW?

Firefox 3.6.16 then V4 greying out after opening when I try to access the menu. Suspect due to an extension, which I will attempt to track. IE and Chrome are fine with much the same extensions. Does anyone have a similar issue?

Fast AMD Athlon multi core desktop. Linux on other my machines doesn't have this issue and versions there are up to 3.6.16 now. Haven't been able to isolate it to a particular cause yet. When I can get another user to back up their bookmarks I'll completely uninstall Firefox and reinstall to see if a clean install has the same issues. I'll then add extensions gradually, checking each time.

Click here and follow the instructions, or if there’s a type of adware not covered by them on the computer, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
(122872)

After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window. The save button greys out. Solutions anyone?

After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window. The save button greys out. Solutions anyone?

Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window.
This action will delete any custom Mail stationery that you have created. If you want to preserve it, ask for instructions.
If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Agent email help - buttons greyed out at one location

The setup: Two call centers. One in NC and one in CA.
The one in NC, which is where the call center servers are, has no issues with email buttons becoming active.
The one in CA, every morning when the agents login the email buttons will not become active unless the users do the following workaround
Start agent.
Run and IE url that was given to me by Cisco. http://<ipaddress of ccx server/EemUi/index.jsp?port=59015
This will force Java to start and have the java icon appear in the system tray.
Email buttons become active
Close IE window (which make email buttons grey out again)
close and restart agent
Email buttons work.
I only have this issue in the CA office.
I had them ship a desktop to me in the NC office. I connected it and did NOT have an issue. Everything works perfectly here.
Is the issue tied to the distance? Is there some java time out setting I can tweek to make this work.
I didn't have this problem with 8.5 su 2.... it happened after the update to su 3
Anyone seen this? Cisco has no answer.

I bounced this around the office to get some ideas. One question - how long is the CA office waiting for the email buttons to become active? That is, setting the workaround aside, if they wait long enough, do the Agent E-Mail buttons ever become active? The thinking is that could be a factor as the entire applet is around 40 MB. If connection speed isn't great it could take a while to download which would explain the scenario.
Tom

Submit Button Greyed Out (v 4.0.5)

I have been using Compressor successfully for about a year. Recently it updated to v4.0.5. Now I am not able to submit, with the final Submit button greyed out. I have checked my Destination folder permissions and all appear correct.
What could be the cause of this, and what shall I do? I need to render a program urgently for broadcast.
Thanks
Geoff

I just resolved a similar problem. I am running OSX 10.6.8 on a MBP 13" 2010.
Once inside Compressor I'd click on "submit" and the drop down window would show "none" next to "Cluster:" and the submit button was greyed out.
I called Apple Care and they had me delete the preference file "com.apple.Compressor.plist" file from my user>library>preferences folder. This did not fix the problem on its own.
They then had me delete the Apple Qmaster folder from user>library>application support. This did not fix the problem on it's own.
I then reinstalled the Compressor application itself. This did not fix the problem on its own.
I then verified permissions and repaired permissions using disk utility. This did not fix the problem on it's own.
I then clicked on "Share Monitor" which is found on the Compressor task bar. "This Computer" was displayed in the left column. I simply clicked on it in order to high light it. I left the "Share Monitor" window open and went back to the submit panel and "This Computer" was now displayed next to "Cluster:" and the program is now working again.
YMMV.

Firefox 8 and 9beta. Back and Forward buttons greyed out. Right click menu also has forward and back greyed out. Updated all plugins, then disabled all plugins and extensions and started in safe mode. No change.

My forward and back buttons are greyed out after update to Firefox 8. Tried to move to 9 beta, but same behavior. Back and Forward also greyed out in right click menu.
Attempted to fix by updating all plugins and extensions, then disabled all plugins and extensions, and then tried to start in safe mode. Nothing worked.

You could have backed up your profile folder. If you did, [[Recovering important data from an old profile]] can help :)

Put, Get , Connection buttons greyed out

Hi All,
I am pretty new to Dreamweaver but not to web development. I
have set up and connected a few sites from my own PC. It all goes
just like it says in the manuals.
But I got called into a client site who have an existing site
set up in Dreamweaver. The DW person left and the current person
wanted some coaching. Well the Code, Split, Design views all came
up and we could edit just fine.
But over on the right, above the list of files, all the
buttons (put, get, connection etc.) were greyed out. At first I
assumed the FTP connection was not set up, but it was, because when
we saved files, they saved straight to the live site.
So I went over to look at Site / Manage Sites. The FTP
connection was listed, but many of the other options (all the
categories within Advanced) did not seem to be available. They were
not just grayed out - I could not even see the list of them.
I have been fiddling around at home on my own sites, trying
to figure out how to recreate this and I can't. I can figure out
how to put myself onto live updating (update to remote FTP on Save)
but I don't get the other buttons greyed out just because I am
working like this.
Any ideas? I'd like to be able to go back there, take them
off live updates and restore the buttons.
Thanks
Abigail

Unless one is working in ColdFusion, or has special
requirements, the FTP &
RDS server option should never be used.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Alan" <[email protected]> wrote in
message
news:C4F834C6.30E30D%[email protected]..
>A guess- they set this up as an "RDS" ftp site, and it is
editing the live
> files on the server.
>
> To make a regular ftp site connection, make a New site.
> If it's CS3 version, make sure you pick "site" and not
"RDS"
> Enter all the details, and make a "regular" ftp
connection, not an RDS
> connection.
>
> --
> Alan
> Adobe Community Expert, dreamweaver
>
>
http://www.adobe.com/communities/experts/
>
>
>

Permissions buttons greyed out in disk utility

In the disk utility, the "verify permissions" and "repair permissions" buttons are greyed out no matter which disk is selected in the left-hand pane. Does anyone know why this is so and/or what alternative ways there are of repairing permissions?
The problem persists whether I start the computer from the recovery system (command-r) or not.
Thanks.

Hi again and thanks for bearing with me!
I haven't done any cleanup, however there are only a couple of files in /Library/Receipts/, all very old, so I'm guessing the receipts are kept elsewhere after OS X 10.5, since the KB article you referred me to explicitly refers to pre- 10.5 systems.
The disk utility log in console and the info in the disk utility itself both give exactly the same info, which is basically what you’ve given:
          Owners Enabled :           Yes
          Can Turn Owners Off :           Yes
          Can Repair Permissions :           Yes
          Can Be Verified :           Yes
          Can Be Repaired :           Yes
          Can Be Formatted :           Yes
          Bootable :           Yes
          Supports Journaling :           Yes
          Journaled :           Yes
          Disk Number :           0
          Partition Number :           2
If I understand correctly, this would all mean that I should be able to click “verify permissions” in the disk utility, but for some mysterious reason I cannot.
However, in the KB article (http://support.apple.com/kb/HT1452) I notice it says “While started from an installation disc in Mac OS X v10.5 and later, a user's home directory permissions can be reset using the "Reset Password" utility.” Does this mean that if I use the reset password utility I can reset permissions and therefore not need to use the repair permissions function of the disk utility? Or is this something completely unrelated to what I’m trying to do?
I really appreciate your help very much - the only reason I wanted to repair permissions was that it was one of the recommended solutions to a problem I’ve had with microsoft office, which thankfully has now been solved after reinstalling os x and office, but it still bugs me that the option to repair permissions seems unavailable!
Anyway, it's not the end of the world if it can't be solved, you've helped me learn a lot in the process!
George

Itunes showing all data as other and sync button greyed out

Itunes showing all data as other and sync button greyed out. I have downloaded and installed Itunes 11 (multiple times) and restored my phone twice already, but I am still not able to sync my Iphone 4 with Itunes.
When I select / de-select Apps on Itunes to remove from the phone the "Apply" button does appear, but after I click it nothing happens. Then the greyed out "sync" button just appears again.
Anyone with some advise please?

Try Restarting or Resetting your touch.
Restart: Hold the Sleep/Wake button until the red slider appears and turn off your iPod. Press the sleep/wake button and hold it until you see the Apple icon.
Reset: Hold the Sleep/Wake button and the Home button at the same time. The red slider will appear first, keep hold everything until you see the Apple icon. Release the buttons.
Check your iPod and see if your music and apps have reappeared. If they do after either option, then resync your iPod.
If neither works, then Restore your touch through iTunes.

Project pane greys out after adding either HD movie footage or a photo'

Project pane greys out after adding either HD movie footage or a photo' into iMovie '08. Since using a HD camcorder, quite often, after adding either HD movie footage or a photo', the project pane greys out. I have to exit the project and re-enter to continue viewing the project; this is tiresome. Any thoughts or is this yet another iMovie '08 bug?

blackcomb greens wrote:
PS ~ what is the plist?
every app as a preference list, which can get corrupted.
quit iM
look in user/Library/Preferences for a file called com.apple.iMovie(x).plist (x stands for any number) ....
trash that.
restart iMovie..
it doesn't hurt your projects nor does it touch any files.. it just 'resets' an app.. => slapp on backhead.. as I like to call it..
yes, hardware is nice, as long as you don't dare to handle AVCHD .. that is on Intel Mac only..
all Folders (Project/Events) is on local harddrive?
no plug-ins installed (DivX etc)?

My wi-fi button greyd out after iOS 6.1 update. Any sugestions to solve this problem?

My wi-fi button greyd out after iOS 6.1 update. Any sugestions to solve this problem?

IOS: Wi-Fi or Bluetooth settings greyed out or dim.
http://support.apple.com/kb/TS1559

Call Button Greyed Out After A Third Participant Is Added to The Conversation in Office Communicator 2007 R2

Similar Messages

Maybe you are looking for