Call completed but no audio vpn to vpn

   I've installed IP Phones at some remote locations and they can call other IP Phones but when they call other phones that our on a VPN, the call says completed but there isn't any audio.
We have an ASA5520 and several ASA5505s with S2S VPNs. Call manager is located on the central site with ip phones on the remote ASAs. It seems to me that RTP is blocked somewhere. I have proper ACLs  on the ASAs allowing them to communicate directly with the other remote subnets.     

I don't know Linux, but I suggest;<BR><BR>
Clear the Cache '''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''<BR><BR>
and<BR><BR>
Remove Cookies '''''Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"'''''<BR><BR>
If there is still a problem, try to
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
===========================================
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Similar Messages

  • My iPhone 6plus will no longer connect to my Dodge UConnect system. Phone calls get a beep "phone call completed" message. Music will play though. Just can't make calls. Tried turning off iCloud and repairing but nothing works. It did work a few days

    My iPhone 6plus will no longer connect to my Dodge UConnect system. Phone calls get a beep "phone call completed" message. Music will play though. Just can't make calls. Tried turning off iCloud and repairing but nothing works. It did work a few days

    Hi Jpcbew,
    The article linked below provides a lot of great information and troubleshooting tips that can help you resolve the issue with your iPhone 6 Plus connecting to you car stereo system. 
    Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
    So long,
    -Jason

  • Need a proxy but no other vpn settings.

    I've tried everything I can try - I need a proxy setting at school for web browsing, but no other vpn settings. I can't seem to get the proxy settings to "stick".
    Wireless network access painless otherwise - airport base stations or Trapeze.
    Rick Hein

    Rick Hein,
    You are in the settings for all network connections. VPN is there because you could be utilizing VPN on both WiFi and EDGE. The proxy server setting you are seeing is there because some companies require all your traffic to go through a proxy while you are on VPN.
    To get to the WiFi settings, while connected to the WiFi go to Settings -> WiFi-> The blue > next to the network you are on. There you can set connections for that network.
    Hope this helps,
    Nathan C.

  • Can connect to database on network but not through VPN

    oracle 10g/11g
    windows 2003/2008
    juno pule vpn
    Hi,
    When I'm on the office network I can sqlplus and remote desktop to to database server, but on the VPN I can't connect with sqlplus or remote desktop, but I can tnsping.
    How can this be??

    Hi Guys,
    Hope some of you are still following this thread.
    Spoke to the network guys and they are at a loss. They say that port 1521 is allowed through the vpn and firewall.
    When I try to connect over the new JUNOS PULSE SVPN, I see in the listener log file that it established connection, but I think it can't see the client after it is allocated the temp listener port?
    Any suggestions please?
    In listener.log
    ===============
    05-SEP-2012 20:38:06 * (CONNECT_DATA=(SERVICE_NAME=EOH_CRM_PRD)(failover_mode=(type=SESSION)(method=BASIC))(SERVER=DEDICATED)(CID=(PROGRAM=C:\oracle\app\product\11.2.0\client_1\bin\sqlplus.exe)(HOST=DBAVM)(USER=Van))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.12.200.45)(PORT=52940)) * establish * EOH_CRM_PRD * 0
    Fatal NI connect error 12170.
    VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.2.0.2.0 - Production
         Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.2.0 - Production
         Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.2.0 - Production
    Time: 05-SEP-2012 20:39:07
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12535
    TNS-12535: TNS:operation timed out
    ns secondary err code: 12606
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0
    Client address: <unknown>

  • I purchased an album a while ago and just got a new ipod so i downloaded all my purchases, and it all downloaded, but it downloaded the wrong songs. It says on the title that it is the correct song, but the audio is a completely different album. any help?

    I purchased an album a while ago and just got a new ipod so i downloaded all my purchases, and it all downloaded, but it downloaded the wrong songs. It says on the title that it is the correct song, but the audio is a completely different album. any help?

    If you have been using the mac.com Apple ID to make iTunes purchases recently, then there should be no issues continuing to use it with the new iPhone. I would abandon the new ID as you will never get Apple to merge the two IDs. I have had a mac.com ID for years and continue to use it with my iPhone 4S.
    Tell us the issues that you encounter trying to set up the iPhone with the mac.com account.

  • TS3406 My iphone 6 loses audio to/from the caller randomly.  It is working fine then drops audio both ways.  Also sometimes when I make a call, it goes through, but no audio to/from. Rebooting corrects. Help?

    iPhone 6.  When making a call, I have no audio in/out of the phone, but the other phone rings and connects.  It happens randomly.  I have also lost audio in/out in the middle of a phone call as well.  Rebooting resolves the problem until it happens again.
    is this a software issue or does my hardware have an issue?  Currently running iOS 8.1.1, but it has happened since the phone was new with 8.0...

    Well, I think I figured it out... at least I've stopped it from happening...
    I have a third party bluetooth receiver that I use occasionally in my car that is hooked up to the stereo's AUX port.  One time, when my phone cut out in the middle of a call, I looked down and the phone call had been switched to playing through that bluetooth device.  I told the phone to forget the device, and it hasn't happened since.  (About 3 weeks)
    What is odd is that this would happen when I was 500 feet away from my car at my office and couldn't have sensed the bluetooth signal.  (Also the car had been off for hours).
    It doesn't happen with my phone still acknowledging the handsfree bluetooth in my car, but I seem to have solved my inability to speak or hear...  I just need to forget the bluetooth adapter every time I stop using it.

  • HT1657 We just downloaded a movie from Itunes but the picture is completely scrambled. Audio is fine but all you can see are funny color pixels on the screen..how do we fix this?e

    We just downloaded a movie from Itunes but the picture is completely scrambled. Audio is fine but all you can see are funny color pixels on the screen..how do we fix this?

    The movie is from iTunes.   You would think that a download from iTunes to a MacBook could be watched on an HDTV using Apple TV without any headaches bit this does not appear to be the case. 

  • I'm trying to install iTunes on my computer running Windows 7 Home Premium.. I'm not sure if iTunes is compatible with it because when I try to install it, it says the installation is complete but it says there was an error so I can't get it! Please help!

    Hellooo Apple Community!
    I'm trying to install iTunes on my computer running Windows 7 Home Premium. I'm not sure if iTunes is compatible with my computer operating system because when I try to install it, it says the installation is completed but it says there was an error so it won't let me get itunes! Can someone please tell me if iTunes can be downloaded and installed on "Windows 7 Home Premium" and if so, how?! I need iTunes asap, I have an iphone 4 running ios 6.1.3. Please get back to mee!!
    Thankyou thankyou thankyou!
    Natalie.

    I just tried running the Lenovo Hard Drive Quick Test both in normal mode and in safe mode.  Both times it indicated a failed read test on the HDD. The last two tests also failed.  I forget what those tests were called.
    I am really beginning to think I have a bad HDD and the problem just happens to be in the reserved partition where my factory system software resides.

  • When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    Hi Brian,
    Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
    Thanks for your help though!
    Pernille

  • HT201407 during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings it took 4 hours an completed but my iphone still wont come on..what can i do to fix the problem? please

    during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings using itunes it took 4 hours and completed but my phone still wont come on..what can i do to fix the problem? please help #

    In trying to include what information all that I could I should have specified I DON'T KNOW THAT IT WAS DEFINATELY JAILBROKEN when I took it to the apple store they told me there's no way for them to tell if it was jail broken or not. I'm only going by what ppl have told me COULD HAVE BEEN DONE TO THE PHONE. With that said the only thing I know for sure is that the apple tech at the Genius Bar told me that someone took control of my root menu in February &amp; I've had no control of my phone since. I asked him how to regain control &amp; how he knew his exact words were "oh that is out of our scope of capabilities here at this level &amp; you would need an apple engineer to fix it". I said ok then how do I get an apple eng then? He laughed &amp; said you can't!!!! To which I was furious I came home &amp; called apple requesting to speak w/the fraud dept to file a report they said we don't have a fraud dept!! So after a 45 mn phone call again I left w/no answers.
    @TJBUSMC1973-
    I DON'T HAVE THOUSANDS OF DOLLARS TO SPEND HIRING AN ATTORNEY &amp; Although I appreciate your suggestion I fail to how an attorney would be able to facilitate in any way since there's no suspect. I cannot prove that it's him doing it so I certainly can't pursue legal action w/no proof &amp; no money. :'((
    Again I thank you for your advice but I don't think that will help.
    I was looking more for a TECHNICAL way to avoid this happening w/a new phone should I buy one or trying to get them out of my phone now! Such as installing some kind of software protection?? Someway to clear out the entire phone (other than factory reset which was done 10 x's w/no success, etc. if this person got in then there HAS TO BE A WAY OF GETTING HIM OUT, right????

  • On my iPhone 4, people cant hear me when I make and / or receive normal (GSM) phone calls. But when on calls using internet based / native apps like viber or skype, people can hear me just fine. Voice memos work too and have already tried different SIMs

    On my iPhone 4, people cant hear me when I make and / or receive normal (GSM) phone calls. But when I make/receive calls using internet-based / native apps like viber or skype, people can hear me just fine. I have tried recording my voice using voice memos - this works. And have already tried different SIM cards but the problem persists.
    I have taken my phone to an authorized Apple service center, where they restored my phone to factory settings, but still facing the same issue. They service center directed me to Apple Customer Care Hotline, where I have now spent 3+ hours explaining my issue and yet no one can resolve it. The easy answer if to replace the phone - and since it is out of warranty, I am expected to pay for it.
    Additionally, the customer service has been so rude and confrontational that it has completely changed my view of Apple and its customer focus. I am a disappointed and angry customer today - people would be surprised to hear just how rude customer service was including making statements such as "Apple doesnt make infallible products, that's why warranty is needed for our products" and that "every product undergoes a problem at some stage, so do ours!" There goes whatever confidence I had...
    My concern is simple - if no one at Apple and / or its CS hotline is able to address my issue comprhensively and keep telling me that they have never encountered a precedent before, then with what right can they expect me to pay for a replacement?! I am NOT here to fund Apple's research into their product faults and manufacturing.
    And even though a customer is out of warranty, is it too much to expect an Apple product to work well for at least a 'reasonable' period of time. My phone is less than 18 months old and has been facing this issue for the past 2 months - surely the longevity of Apple products is more than 18 months!
    Just a sad sad day for an Apple customer, compounded by unjustifiably rude and aggressive staff. And still no resolution to my problem.

    I am having the same issue - with my last 2 iPhone 4's. My first handset each time I was on a call wether it was up to my ear or on loud speaker, the call would automatically mute even though the mute button wouldn't show up as highlighted. Pressing the mute button on and off during the call doesn't fix it either. I rang Apple and asked what some of their trouble shooting solutions were. I got told that it might be a software issue and to install the latest software update. This failed. I then got told to uninstall the software on the phone and do a complete restore. This also failed. After trying the troubleshooting suggestions, I took the phone into my provider and they sent me out a new phone within a week under warranty claiming it was a hardware issue and probably just a "glitch" with that particular phone. This was not the case....
    After receiving my second iPhone 4, I was hopeful that it would work. For the first couple of days, making/receiving calls was not an issue. Until after about a week, the same problem started again. In one instance I had to hang up and call back 4 times and the call would still automatically mute after about 5 seconds. Also on the second handset, the main camera located on the back of the phone has red and blue lines running through it and can't take a decent picture. So back to the store I go to get another replacement - Again.
    For a phone that is rated highly and as a keen Apple product purchaser, I am a bit disappointed with the experience I have had with the iPhone 4. Let's hope they find a fix sometime soon because this is becoming a bit beyond a joke.....!!

  • I downloaded ios7 and now have no sound when I play music on itunes nor do I have it when I try movies on Netflix. I get sound IF I plug in earbuds, but no sound if unplugged! NO SOUND! I get sounds for texts, calls, etc, but nothing else. HELP!

    I do not have SOUND after downloading IOS7. I can use earbuds, but no sound when not plugged in. I cannot play music, hear a movie on iTunes or Netflix. Sound works for incoming calls, msgs, etc, but NO sound for music or movies. HELP!

    Format: Windows Media Audio 9 Standard, Stereo, 44.100 kHz
    Windows Media Video 8, 320 x 240, Millions
    FPS: 29.83
    Data Size: 300.88
    Data Rate: 2464.78 kbits/s
    Duration: 16.59.55
    Normal Size 320x240 pixels
    Current Size 320x240 pixels (actual size)
    I used Mpeg Streamclip last night to take the .mov files to DV, but same thing I put into iDVD and made a disk image. Once all done i opened the image and the videos were there, but no audio.
    This first dvd had 2 of the videos in it the totaled about 90mins. I will try using the higher format. Also with having MPEG streamclip now, I guess I should go back to the .WMV files and try to converting form them? instead of the .mov files.

  • ERROR: Module load completed but symbols could not be loaded for Adobe AIR.dll

    Does anyone know what causes this error? The application installed on my machine is using Adobe Air.dll version 2.0.3.13070
    This dump file has an exception of interest stored in it.
    The stored exception information can be accessed via .ecxr.
    (2b84.2908): Application hang - code cfffffff (first/second chance not available)
    eax=00000000 ebx=05105dbc ecx=0c013503 edx=00002b84 esi=77f15b70 edi=00000002
    eip=00a68972 esp=0012e03c ebp=00000000 iopl=0         nv up ei pl zr na pe nc
    cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00040246
    Unable to load image c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Adobe AIR.dll, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for Adobe AIR.dll
    *** ERROR: Module load completed but symbols could not be loaded for Adobe AIR.dll
    Adobe_AIR+0x58972:
    00a68972 8bec            mov     ebp,esp

    Hi,
    Check weather its right path or not.Even check the call interface,weather you are giving the right one or not.
    Regards,
    Srikanth

  • My MBP with RD's Facetime camera freezes when changing portrait to landscape during facetime calls on the display of the person who i'm calling to, but it shows alright on my side, what's going on?

    My MBP with RD's Facetime camera freezes when changing portrait to landscape during facetime calls on the display of the person who i'm calling to, but it shows alright on my side, what's going on?
    Another thing is that on Skype, whenever i clicked to sharescreen it only show a complete black out window. nothing else.
    Tried restore OSX mountain lion, doesn't work. what should i do?

    kaeandcolesmon,
    If you open the recovery drive (partition) it should only have a single folder (Recovery).
    To make sure that your not saving restore points to that drive.
    See:
    Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • User-Decision COMPLETED buti next step not executed

    Hi Gurus,
    I have a very strange problem when approving user-decision tasks in my workflow using FM SAP_WAPI_DECISION_COMPLETE.
    SOMETIMES, the user-decision step becomes COMPLETED but the result in the workflow logs (SWI1) is blank and does not continue to the next steps of my workflow. I've done my research and checked everything (commit = X, SWU3, Task is General, etc..) but i still have not found any solution yet.
    FYI: this does not happen all the time, most of the time the workflow works fine.
    Based on SWWWIHEAD, the user ADSUSER(from WebDynpro)  is the creator and the last one who updated the workflow instance.
    Here's part of my code for your reference: (RFC - called by WebDynpro)
      CALL FUNCTION 'SWL_GET_PROCESS_STEPLIST'
        EXPORTING
          wf_id                       = wi_id
          with_techdetails            = space
          with_expansion              = space
          with_errors                 = space
        TABLES
          wfm_steplog                 = lt_wfm_steplog
        EXCEPTIONS
          workflow_does_not_exist     = 1
          error_while_reading_wfm_log = 2
          OTHERS                      = 3.
      DELETE lt_wfm_steplog WHERE wi_type NE 'W'.
      CLEAR: wa_wfm_steplog, li_lines.
      DESCRIBE TABLE lt_wfm_steplog LINES li_lines.
      READ TABLE lt_wfm_steplog INTO wa_wfm_steplog INDEX li_lines.
        IF in_pdf_flag = 'Y'.      "Continue
          ly_decision_key = '0001'.
        ELSE. "Cancel
          ly_decision_key = '0002'.
        ENDIF.
        IF NOT ly_decision_key IS INITIAL .
          CALL FUNCTION 'SAP_WAPI_DECISION_COMPLETE'
            EXPORTING
              WORKITEM_ID          = wa_wfm_steplog-wi_id
              LANGUAGE             = SY-LANGU
              USER                 = SY-UNAME
              DECISION_KEY         = ly_decision_key
              DO_COMMIT            = 'X'
            IMPORTING
              RETURN_CODE          = l_subrc.
    Thanks in advance.
    Regards,
    Dexter

    Hello Dexter,
    Thanks for the reply.
    I have tried running the BAPI through Automation Tools which we have. That is Process Runner.
    With the help of this I was Approving the WorkFlow. But as i found the issue, so for trouble schooting this i had manually checked in SAP though SE37 t-code.
    Below is the code of BAPI 'sap_wapi_decision_complete'
    =====================================================================
    FUNCTION sap_wapi_decision_complete.
    *"*"Lokale Schnittstelle:
    *"  IMPORTING
    *"     VALUE(WORKITEM_ID) TYPE  SWR_STRUCT-WORKITEMID
    *"     VALUE(LANGUAGE) LIKE  SWR_STRUCT-WILANGUAGE DEFAULT SY-LANGU
    *"     VALUE(USER) TYPE  SYUNAME DEFAULT SY-UNAME
    *"     VALUE(DECISION_KEY) TYPE  SWR_DECIKEY
    *"     VALUE(DO_COMMIT) TYPE  XFELD DEFAULT 'X'
    *"  EXPORTING
    *"     VALUE(RETURN_CODE) LIKE  SY-SUBRC
    *"     VALUE(NEW_STATUS) TYPE  SWW_WISTAT
    *"  TABLES
    *"      MESSAGE_LINES STRUCTURE  SWR_MESSAG OPTIONAL
    *"      MESSAGE_STRUCT STRUCTURE  SWR_MSTRUC OPTIONAL
      DATA: lh_msg TYPE REF TO cl_swf_utl_wapi_message,
            lv_excp TYPE REF TO cx_swf_ifs_exception,
            funcname TYPE funcname VALUE 'SAP_WAPI_DECISION_COMPLETE',
            lv_wi_handle TYPE REF TO if_swf_run_wim_internal,
            ls_t100msg TYPE swf_t100ms,
            lv_handle TYPE sytabix,
            lh_wapi TYPE REF TO if_swf_utl_wapi_framework,
            ls_swwwihead TYPE swwwihead,
            l_nodetype TYPE swd_nodetp,
            lt_alternatives TYPE swr_decialts OCCURS 0 WITH HEADER LINE.
      DATA: lt_cont TYPE swr_cont OCCURS 0 WITH HEADER LINE.
      DATA: lh_params TYPE REF TO if_swf_ifs_parameter_container.
      DATA: lh_trc_data TYPE REF TO if_swf_cnt_container.
      DATA: lt_message_lines TYPE sapi_msg_lines.
      DATA: lt_message_struct TYPE sapi_msg_struc.
    *- startup framework
      lh_wapi = cl_swf_utl_wapi_framework=>create( im_language = language ).
      lh_msg = lh_wapi->get_message_object( ).
      lh_params = lh_wapi->get_parameter_container( ).
      CALL METHOD lh_wapi->set_commit_control( im_commit = do_commit ).
      TRY.
          CALL METHOD lh_params->set
            EXPORTING
              name  = lh_wapi->c_workitem_id
              value = workitem_id.
        CATCH cx_swf_cnt_container .
      ENDTRY.
      lv_handle = lh_wapi->register_function( im_function = funcname
                                              im_parameters = lh_params ).
    *~~ begin of trace specific coding ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
      IF lh_wapi->m_trace_handle IS BOUND.
        TRY.
            lh_trc_data = lh_wapi->get_initial_trace_data( ).
            CALL METHOD lh_trc_data->element_set
              EXPORTING
                name  = 'WORKITEM_ID'
                value = workitem_id.
            CALL METHOD lh_trc_data->element_set
              EXPORTING
                name  = 'LANGUAGE'
                value = language.
            CALL METHOD lh_trc_data->element_set
              EXPORTING
                name  = 'USER'
                value = user.
            CALL METHOD lh_trc_data->element_set
              EXPORTING
                name  = 'DECISION_KEY'
                value = decision_key.
            CALL METHOD lh_trc_data->element_set
              EXPORTING
                name  = 'DO_COMMIT'
                value = do_commit.
            CALL METHOD lh_wapi->write_trace
              EXPORTING
                im_evt  = swwtr_api_init
                im_data = lh_trc_data.
          CATCH cx_swf_ifs_exception.                       "#EC NO_HANDLER
        ENDTRY.
      ENDIF.
    *~~ end of trace specific coding ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
      TRY.
    *- function valid (allowed)
          IF lv_handle LE 0.
            lv_excp = lh_wapi->get_last_exception( ).
            return_code = 900.
            RAISE EXCEPTION lv_excp.
          ENDIF.
    *- get properties
          CALL METHOD cl_swf_run_wim_factory=>find_by_wiid
            EXPORTING
              im_wiid     = workitem_id
            RECEIVING
              re_instance = lv_wi_handle.
    * is it a decision at all?
          MOVE-CORRESPONDING lv_wi_handle->m_sww_wihead TO ls_swwwihead.
          CALL METHOD cl_swf_run_workitem_compatible=>get_def_guid_structure
            EXPORTING
              im_header   = ls_swwwihead
            IMPORTING
              ex_nodetype = l_nodetype.
          IF l_nodetype <> swfco_wd_decision.
            return_code = 2.
            ls_t100msg-msgid = 'SWR'.
            ls_t100msg-msgty = 'E'.
            ls_t100msg-msgno = 205.
            ls_t100msg-msgv1 = workitem_id.
            RAISE EXCEPTION TYPE cx_swf_run_wim
              EXPORTING t100_msg = ls_t100msg
                        wi_id    = workitem_id.
          ENDIF.
    *- get texts
          CALL FUNCTION 'SWU_GET_DECISION_TEXT_TITLE'
            EXPORTING
              language           = language
              wiid               = workitem_id
            TABLES
              decision_text      = lt_alternatives[]
            EXCEPTIONS
              node_not_found     = 1
              text_not_found     = 2
              workflow_not_found = 3
              OTHERS             = 4.
          IF sy-subrc <> 0.
            return_code = 2.
            ls_t100msg-msgid = 'SWR'.
            ls_t100msg-msgty = 'E'.
            ls_t100msg-msgno = 206.
            ls_t100msg-msgv1 = workitem_id.
            RAISE EXCEPTION TYPE cx_swf_run_wim
              EXPORTING t100_msg = ls_t100msg
                        wi_id    = workitem_id.
          ENDIF.
    *- check alternative id
          READ TABLE lt_alternatives WITH KEY altkey = decision_key.
          IF sy-subrc <> 0.
            return_code = 3.
            ls_t100msg-msgid = 'SWR'.
            ls_t100msg-msgty = 'E'.
            ls_t100msg-msgno = 207.
            ls_t100msg-msgv1 = workitem_id.
            ls_t100msg-msgv2 = decision_key.
            RAISE EXCEPTION TYPE cx_swf_run_wim
              EXPORTING t100_msg = ls_t100msg
                        wi_id    = workitem_id.
          ENDIF.
        CATCH cx_swf_ifs_exception INTO lv_excp.
          IF return_code IS INITIAL.
            return_code = 1.
          ENDIF.
          CALL METHOD lh_msg->set_exception_object( im_excp = lv_excp ).
    *- set export
          message_lines[] = lh_msg->get_message_lines( ).
          message_struct[] = lh_msg->get_message_struct( ).
          EXIT.
      ENDTRY.
    *- unregister to framework
      CALL METHOD lh_wapi->unregister( lv_handle ).
    *- complete decision item
      lt_cont-element = swfco_wi_result_const.
      lt_cont-value   = decision_key.
      APPEND lt_cont.
      lt_cont-element = swfco_om_result_const.
      lt_cont-value   = decision_key.
      APPEND lt_cont.
      CALL FUNCTION 'SAP_WAPI_WORKITEM_COMPLETE'
        EXPORTING
          workitem_id      = workitem_id
          actual_agent     = user
          language         = language
          do_commit        = do_commit
        IMPORTING
          return_code      = return_code
          new_status       = new_status
        TABLES
          simple_container = lt_cont[]
          message_lines    = message_lines
          message_struct   = message_struct.
    *~~ begin of trace specific coding ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
      IF lh_wapi->m_trace_handle IS BOUND.
        TRY.
            lh_trc_data = lh_wapi->get_initial_trace_data( ).
            CALL METHOD lh_trc_data->element_set
              EXPORTING
                name  = 'RETURN_CODE'
                value = return_code.
            CALL METHOD lh_trc_data->element_set
              EXPORTING
                name  = 'NEW_STATUS'
                value = new_status.
            lt_message_lines = message_lines[].
            CALL METHOD lh_trc_data->element_set
              EXPORTING
                name  = 'MESSAGE_LINES'
                value = lt_message_lines.
            lt_message_struct = message_struct[].
            CALL METHOD lh_trc_data->element_set
              EXPORTING
                name  = 'MESSAGE_STRUCT'
                value = lt_message_struct.
            CALL METHOD lh_wapi->write_trace
              EXPORTING
                im_evt  = swwtr_api_result
                im_data = lh_trc_data.
          CATCH cx_swf_ifs_exception.                       "#EC NO_HANDLER
        ENDTRY.
      ENDIF.
    *~~ end of trace specific coding ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
    ENDFUNCTION.
    ========================================================================
    When I pass all the data through Process Runner Program and check in SAP manually it look like below in SAP
    Kindly check the above screen shot and Help me in this regard.
    Thanks,
    Srikanth

Maybe you are looking for

  • Same Sender and Receiver File Name. Pls advice urgent

    Hi All, My sender file name is auto generated number so it is dynamic in nature. ex. "abc1.txt"      "abc2.txt" Now In my Sender File Adapter I cannot give File Name hard coded as my sender file name is auto generated number. Also I want same file na

  • Stock goes min, level warning msg using Dy. Avl. Check

    Dear, With OMCP - created new checking rule and Defined checking rule combination 01 & 02 - new checking rule. Material master Checking group assigned as 02. Material master entered some quantiity Safety stock. Set movementy type for Warning message

  • New bios?

    I'm wondering if a new bios version (i've 1.9 revision) will be developped for the 865 pe boards. I've just tried my cpu in another board (asus p4p 800) and can get higher fsb. With the same chipset it seems strange?? can you explain how it's possibl

  • Dragging a large still image from the browser into the viewer crashes FCP

    Okay, I've not seen this problem until just a couple days ago but was wondering if it was just me or if everyone has this problem? I've found a work-around, but let me explain the problem first. I'm creating a growing up photo montage. I scanned all

  • MX_HCM_EMPLOYEE is missing

    Hello together, I am exporting from a SAP HCM system User over a VDS to a SAP IDM 7.1. And now I have a problem... in the export the MX_HCM_EMPLOYEE attribute is missing. When I am have a view to the data record over the LDAP transaction in SAP HCM s