Call Connected displays after call termination
Two or three times during the day, after hanging up from a call, the call does not terminate. "call connected" displays, yet no one is there, nor was there an accidental dial. The only way I have found to actually terminate the call is to pull the battery. I have no incoming nor outgoing calling capabilities until the reboot is complete.
Hello megohm64,
Welcome to the BlackBerry Support Community Forums.
To correct this particular issue i would recommend backing up the BlackBerry Smartphone and then performing a security wipe.
To back up the BlackBerry Smartphone, please open the BlackBerry Desktop Manager and connect your device. Click on the Backup and Restore options and select Back Up. Please note the location where the backup is being saved as we will need to access it later to restore the BlackBerry Smartphone.
Once you have backed up your BlackBerry Smartphone please follow the link below to complete a security wipe.
Link: http://www.blackberry.com/btsc/KB14058
Once the device is wiped please test to make sure it is working correctly and then complete a selective restore of your BlackBerry Smartphone. Below is the link on how it is done.
Link: http://www.blackberry.com/btsc/KB10339
Thanks
-DrP
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!
Similar Messages
-
Every time I call through face time on my I pad2, it rings and it says connecting and after that it closes and won't connect.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Unable to make or receive FaceTime calls after April 16, 2014
http://support.apple.com/kb/TS5419
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
HELP Can't call terminal by Mod4+Enter (awesome wm)
I can't call terminal by binding key Mod4+Enter. What wrong happened with my rc.lua ?. Please help me. My english not well, sorry everyone.!
-- z1lt0id Awesome WM 3.5.+ config --
-- github.com/z1lt0id --
-- Varation of github.com/copycat --
-- Required Libraries
gears = require("gears")
awful = require("awful")
awful.rules = require("awful.rules")
awful.autofocus = require("awful.autofocus")
wibox = require("wibox")
beautiful = require("beautiful")
naughty = require("naughty")
vicious = require("vicious")
scratch = require("scratch")
-- layouts
layouts = require("layouts")
-- Conky
function get_conky()
local clients = client.get()
local conky = nil
local i = 1
while clients[i]
do
if clients[i].class == "Conky"
then
conky = clients[i]
end
i = i + 1
end
return conky
end
function raise_conky()
local conky = get_conky()
if conky
then
conky.ontop = true
end
end
function lower_conky()
local conky = get_conky()
if conky
then
conky.ontop = false
end
end
function toggle_conky()
local conky = get_conky()
if conky
then
if conky.ontop
then
conky.ontop = false
else
conky.ontop = true
end
end
end
-- Run once function
function run_once(cmd)
findme = cmd
firstspace = cmd:find(" ")
if firstspace then
findme = cmd:sub(0, firstspace-1)
end
awful.util.spawn_with_shell("pgrep -u $USER -x " .. findme .. " > /dev/null || (" .. cmd .. ")")
end
run_once("compton --backend glx --paint-on-overlay --vsync opengl-swc --unredir-if-possible --shadow-exclude 'n:a:Conky' --blur-background-exclude 'n:a:Conky' --config ~/.compton.conf -b")
-- run_once("nm-applet")
-- run_once("/opt/dropbox/dropboxd")
run_once("mpd")
run_once("conky ~/.conkyrc")
run_once("unclutter -idle 1")
-- Localization
os.setlocale("en_AU.UTF-8")
-- Error Handling
-- Check if awesome encountered an error during startup and fell back to
-- another config (This code will only ever execute for the fallback config)
if awesome.startup_errors then
naughty.notify({ preset = naughty.config.presets.critical,
title = "Oops, there were errors during startup!",
text = awesome.startup_errors })
end
-- Handle runtime errors after startup
do
in_error = false
awesome.connect_signal("debug::error", function (err)
-- Make sure we don't go into an endless error loop
if in_error then return end
in_error = true
naughty.notify({ preset = naughty.config.presets.critical,
title = "Oops, an error happened!",
text = err })
in_error = false
end)
end
-- Variable Definitions
home = os.getenv("HOME")
confdir = home .. "/.config/awesome"
scriptdir = confdir .. "/script/"
themes = confdir .. "/themes"
active_theme = themes .. "/blackburn"
beautiful.init(active_theme .. "/theme.lua")
terminal = "urxvt"
editor = "vim"
editor_cmd = terminal .. " -e " .. editor
gui_editor = "gedit"
browser = "dwb"
browser2 = "dwb"
mail = terminal .. " -g 130x30 -e mutt "
tasks = terminal .. " -e htop "
musicplr = terminal .. " -g 130x34-320+16 -e ncmpcpp "
modkey = "Mod4"
altkey = "Mod1"
-- Table of layouts to cover with awful.layout.inc, order matters.
layouts =
awful.layout.suit.floating,
layouts.uselesstile,
layouts.termfair,
layouts.browse,
layouts.uselessfair,
layouts.centerwork,
-- Wallpaper
if beautiful.wallpaper then
for s = 1, screen.count() do
gears.wallpaper.maximized(beautiful.wallpaper, s, true)
end
end
-- Tags
tags = {
names = { " :) ", " :/ ", " :P ", " X) ", " ;) "},
layout = { layouts[1], layouts[2], layouts[2], layouts[2], layouts[2] }
for s = 1, screen.count() do
tags[s] = awful.tag(tags.names, s, tags.layout)
end
-- Menu
myaccessories = {
{ "ranger", terminal .. " -depth 16 -g 130x30 -e ranger"},
{ "editor", gui_editor }
myinternet = {
{ "weechat", terminal .. " -g 130x30 -e weechat-curses" },
{ "sabnzbd" , "dwb http://localhost:9090" },
{ "transmission", terminal .. " -g 130x30 -e transmission-remote-cli -c xenogia:dot.dot.dot@localhost:9091" },
{ "sickbeard", "dwb http://localhost:8081" },
{ "couchpotato", "dwb http://localhost:5050"}
mymedia = {
{ "volume", "pavucontrol"},
{ "smplayer", "smplayer"},
{ "vlc", terminal .. " -e vlc -I ncurses" },
{ "cdw", terminal .. " -g 130x30 -e cdw"},
{ "devede", "devede"},
{ "ghb" , "ghb"}
mygames = {
{ "playonlinux", "playonlinux"},
{ "dosbox" , "dosbox"},
{ "desura", "desura"},
{ "steam", "steam" },
mygraphics = {
{ "gimp" , "gimp" },
{ "feh" , "feh" }
myoffice = {
{ "libreoffice" , "libreoffice" }
mysystem = {
{ "lxappearance" , "lxappearance" },
{ "gparted" , "sudo gparted"},
{ "htop" , tasks }
mymainmenu = awful.menu({ items = {
{ "accessories" , myaccessories },
{ "graphics" , mygraphics },
{ "internet" , myinternet },
{ "media" , mymedia },
{ "games" , mygames },
{ "office" , myoffice },
{ "system" , mysystem },
mylauncher = awful.widget.launcher({ image = beautiful.awesome_icon,
menu = mymainmenu })
-- Colours
coldef = "</span>"
colwhi = "<span color='#b2b2b2'>"
colbwhi = "<span color='#ffffff'>"
blue = "<span color='#7493d2'>"
yellow = "<span color='#e0da37'>"
grey = "<span color='#636060'>"
purple = "<span color='#e33a6e'>"
lightpurple = "<span color='#eca4c4'>"
azure = "<span color='#80d9d8'>"
green = "<span color='#87af5f'>"
lightgreen = "<span color='#62b786'>"
red = "<span color='#bd0707'>"
orange = "<span color='#ff7100'>"
brown = "<span color='#db842f'>"
fuchsia = "<span color='#800080'>"
gold = "<span color='#e7b400'>"
lightblue="<span color='#3eae9e'>"
lightblue2="<span color='#266c76'>"
lightblue3="<span color='#285666'>"
lightblue4="<span color='#257c85'>"
lightblue5="<span color='#223d5a'>"
lightblue6="<span color='#235369'>"
offyellow="<span color='#857b52'>"
bottomgrey="<span color='#999999'>"
-- {{{ Wibox
-- {{{{ Temp
tempicon = wibox.widget.imagebox()
tempicon:set_image(beautiful.widget_temp)
tempwidget = wibox.widget.textbox()
vicious.register(tempwidget, vicious.widgets.thermal, bottomgrey .. " Temp: $1°C" .. coldef, 15, "thermal_zone0")
-- {{{ Kernel Info
sysicon = wibox.widget.imagebox()
sysicon:set_image(beautiful.widget_arch)
syswidget = wibox.widget.textbox()
vicious.register( syswidget, vicious.widgets.os, bottomgrey .. " Kernel: $2" .. coldef)
-- {{{ Uptime
uptimeicon = wibox.widget.imagebox()
uptimeicon:set_image(beautiful.widget_uptime)
uptimewidget = wibox.widget.textbox()
vicious.register( uptimewidget, vicious.widgets.uptime, bottomgrey .. " Uptime: $1d $2h $3m" .. coldef)
-- {{{ Cpu
-- CPU widget
cpuicon = wibox.widget.imagebox()
cpuicon:set_image(beautiful.widget_cpu)
cpuwidget = wibox.widget.textbox()
vicious.register(cpuwidget, vicious.widgets.cpu, bottomgrey .. " Cpu: $1%" .. coldef, 15)
cpuicon:buttons(awful.util.table.join(awful.button({ }, 1, function () awful.util.spawn(tasks, false) end)))
-- {{{ Ram
-- Memory widget
memicon = wibox.widget.imagebox()
memicon:set_image(beautiful.widget_mem)
memwidget = wibox.widget.textbox()
vicious.register(memwidget, vicious.widgets.mem, bottomgrey .. " Memory: $2MB" .. coldef, 15)
-- {{{ Mpd
mpdicon = wibox.widget.imagebox()
mpdicon:set_image(beautiful.widget_mpd)
mpdwidget = wibox.widget.textbox()
-- Register widget
vicious.register(mpdwidget, vicious.widgets.mpd,
function (widget, args)
if args["{state}"] == "Stop" then
return " - "
else
return args["{Artist}"]..' - '.. args["{Title}"]
end
end, 10)
-- {{{ Net
-- Net widget
netdownicon = wibox.widget.imagebox()
netdownicon:set_image(beautiful.widget_netdown)
netdownicon.align = "middle"
netdowninfo = wibox.widget.textbox()
vicious.register(netdowninfo, vicious.widgets.net, green .. "${enp9s0 down_kb}" .. coldef, 1)
netupicon = wibox.widget.imagebox()
netupicon:set_image(beautiful.widget_netup)
netupicon.align = "middle"
netupinfo = wibox.widget.textbox()
vicious.register(netupinfo, vicious.widgets.net, red .. "${enp9s0 up_kb}" .. coldef, 1)
ethdowninfo = wibox.widget.textbox()
vicious.register(ethdowninfo, vicious.widgets.net, "<span color=\"#d3c6d7\">${enp9s0 down_kb}</span>", 1)
ethupinfo = wibox.widget.textbox()
vicious.register(ethupinfo, vicious.widgets.net, "<span color=\"#d3c6d7\">${enp9s0 up_kb}</span>", 1)
-- {{{ Volume
-- Volume widget
volicon = wibox.widget.imagebox()
volicon:set_image(beautiful.widget_vol)
volumewidget = wibox.widget.textbox()
vicious.register(volumewidget, vicious.widgets.volume, bottomgrey .. " Volume: $1%" .. coldef, 1, "Master")
-- Pacman Widget --
-- Pacman Icon
pacicon = wibox.widget.imagebox()
pacicon:set_image(beautiful.widget_pac)
-- Pacman Widget
pacwidget = wibox.widget.textbox()
pacwidget_t = awful.tooltip({ objects = {pacwidget},})
vicious.register(pacwidget, vicious.widgets.pkg,
function(widget,args)
local io = { popen = io.popen }
local s = io.popen("pacman -Qu")
local str = ''
for line in s:lines() do
str = str .. line .. "\n"
end
pacwidget_t:set_text(str)
s:close()
return "" .. bottomgrey .. " Updates: " .. args[1] .. coldef
end, 60, "Arch")
--'1800' means check every 30 minutes
pacicon:buttons(awful.util.table.join(
awful.button({ }, 3, function () awful.util.spawn("".. terminal.. " --hold -e sudo pacman -Syu", false) end),
awful.button({ }, 1, function () awful.util.spawn("sudo pacman -Syu", false) end)
-- {{{ Clock
-- Textclock widget
clockicon = wibox.widget.imagebox()
clockicon:set_image(beautiful.widget_clock)
mytextclock = awful.widget.textclock(bottomgrey .. " %A %d %B</span> " .. colwhi .. "</span><span color=\"#ffffff\">></span> <span color='#999999'>%H:%M</span>")
-- {{{ Spacers
space = wibox.widget.textbox()
space:set_text(' ')
-- {{{ Seperator
openb = wibox.widget.textbox(lightblue6 .. " [" .. coldef)
closeb = wibox.widget.textbox(lightblue6 .. " ]" .. coldef)
-- Create a wibox for each screen and add it
mywibox = {}
mybottomwibox = {}
bottombox = {}
mypromptbox = {}
mylayoutbox = {}
mytaglist = {}
mytaglist.buttons = awful.util.table.join(
awful.button({ }, 1, awful.tag.viewonly),
awful.button({ modkey }, 1, awful.client.movetotag),
awful.button({ }, 3, awful.tag.viewtoggle),
awful.button({ modkey }, 3, awful.client.toggletag),
awful.button({ }, 4, function(t) awful.tag.viewnext(awful.tag.getscreen(t)) end),
awful.button({ }, 5, function(t) awful.tag.viewprev(awful.tag.getscreen(t)) end)
mytasklist = {}
mytasklist.buttons = awful.util.table.join(
awful.button({ }, 1, function (c)
if c == client.focus then
c.minimized = true
else
-- Without this, the following
-- :isvisible() makes no sense
c.minimized = false
if not c:isvisible() then
awful.tag.viewonly(c:tags()[1])
end
-- This will also un-minimize
-- the client, if needed
client.focus = c
c:raise()
end
end),
awful.button({ }, 3, function ()
if instance then
instance:hide()
instance = nil
else
instance = awful.menu.clients({ width=250 })
end
end),
awful.button({ }, 4, function ()
awful.client.focus.byidx(1)
if client.focus then client.focus:raise() end
end),
awful.button({ }, 5, function ()
awful.client.focus.byidx(-1)
if client.focus then client.focus:raise() end
end))
for s = 1, screen.count() do
-- Create a promptbox for each screen
mypromptbox[s] = awful.widget.prompt()
-- Create an imagebox widget which will contains an icon indicating which layout we're using.
-- We need one layoutbox per screen.
mylayoutbox[s] = awful.widget.layoutbox(s)
mylayoutbox[s]:buttons(awful.util.table.join(
awful.button({ }, 1, function () awful.layout.inc(layouts, 1) end),
awful.button({ }, 3, function () awful.layout.inc(layouts, -1) end),
awful.button({ }, 4, function () awful.layout.inc(layouts, 1) end),
awful.button({ }, 5, function () awful.layout.inc(layouts, -1) end)))
-- Create a taglist widget
mytaglist[s] = awful.widget.taglist(s, awful.widget.taglist.filter.all, mytaglist.buttons)
-- Create a tasklist widget
mytasklist[s] = awful.widget.tasklist(s, awful.widget.tasklist.filter.currenttags, mytasklist.buttons)
-- Create the wibox
mywibox[s] = awful.wibox({ position = "top", screen = s })
-- Widgets that are aligned to the left
local left_layout = wibox.layout.fixed.horizontal()
left_layout:add(mylauncher)
left_layout:add(mypromptbox[s])
-- Widgets that are aligned to the right
local right_layout = wibox.layout.fixed.horizontal()
right_layout:add(space)
right_layout:add(space)
-- right_layout:add(mylayoutbox[s])
-- Now bring it all together (with the tasklist in the middle)
local layout = wibox.layout.align.horizontal()
layout:set_left(left_layout)
-- layout:set_middle(mytasklist[s])
layout:set_middle(mytaglist[s])
layout:set_right(right_layout)
mywibox[s]:set_widget(layout)
-- Create Bottom WiBox
mybottomwibox[s] = awful.wibox({ position = "bottom", screen = s })
-- Widgets Aligned to the Middle
local bottom_left_layout = wibox.layout.fixed.horizontal()
bottom_left_layout:add(sysicon)
bottom_left_layout:add(syswidget)
bottom_left_layout:add(space)
bottom_left_layout:add(volicon)
bottom_left_layout:add(volumewidget)
bottom_left_layout:add(space)
bottom_left_layout:add(cpuicon)
bottom_left_layout:add(cpuwidget)
bottom_left_layout:add(space)
bottom_left_layout:add(memicon)
bottom_left_layout:add(memwidget)
bottom_left_layout:add(space)
bottom_left_layout:add(tempicon)
bottom_left_layout:add(tempwidget)
bottom_left_layout:add(space)
bottom_left_layout:add(pacicon)
bottom_left_layout:add(pacwidget)
bottom_left_layout:add(space)
bottom_left_layout:add(uptimeicon)
bottom_left_layout:add(uptimewidget)
bottom_left_layout:add(space)
bottom_left_layout:add(clockicon)
bottom_left_layout:add(mytextclock)
local bottom_right_layout = wibox.layout.fixed.horizontal()
if s == 1 then bottom_right_layout:add(wibox.widget.systray()) end
-- Bring Bottom Wibox Together
local bottom_layout = wibox.layout.align.horizontal()
bottom_layout:set_middle(bottom_left_layout)
bottom_layout:set_right(bottom_right_layout)
mybottomwibox[s]:set_widget(bottom_layout)
end
-- Mouse Bindings
root.buttons(awful.util.table.join(
awful.button({ }, 3, function () mymainmenu:toggle() end),
awful.button({ }, 4, awful.tag.viewnext),
awful.button({ }, 5, awful.tag.viewprev)
-- Key bindings
globalkeys = awful.util.table.join(
-- Capture a screenshot
awful.key({ altkey }, "p", function() awful.util.spawn("screenshot",false) end),
-- Move clients
awful.key({ altkey }, "Next", function () awful.client.moveresize( 1, 1, -2, -2) end),
awful.key({ altkey }, "Prior", function () awful.client.moveresize(-1, -1, 2, 2) end),
awful.key({ altkey }, "Down", function () awful.client.moveresize( 0, 1, 0, 0) end),
awful.key({ altkey }, "Up", function () awful.client.moveresize( 0, -1, 0, 0) end),
awful.key({ altkey }, "Left", function () awful.client.moveresize(-1, 0, 0, 0) end),
awful.key({ altkey }, "Right", function () awful.client.moveresize( 1, 0, 0, 0) end),
awful.key({ modkey, }, "Left", awful.tag.viewprev ),
awful.key({ modkey, }, "Right", awful.tag.viewnext ),
awful.key({ modkey, }, "Escape", awful.tag.history.restore),
awful.key({ modkey, }, "k",
function ()
awful.client.focus.byidx( 1)
if client.focus then client.focus:raise() end
end),
awful.key({ modkey, }, "j",
function ()
awful.client.focus.byidx(-1)
if client.focus then client.focus:raise() end
end),
awful.key({ modkey, }, "w", function () mymainmenu:show({keygrabber=true}) end),
-- Show/Hide Wibox
awful.key({ modkey }, "b", function ()
mywibox[mouse.screen].visible = not mywibox[mouse.screen].visible
end),
-- Application Switcher
awful.key({ "Mod1" }, "Tab", function ()
-- If you want to always position the menu on the same place set coordinates
awful.menu.menu_keys.down = { "Down", "Alt_L" }
local cmenu = awful.menu.clients({width=245}, { keygrabber=true, coords={x=525, y=330} })
end),
-- Layout manipulation
awful.key({ modkey, "Shift" }, "j", function () awful.client.swap.byidx( 1) end),
awful.key({ modkey, "Shift" }, "k", function () awful.client.swap.byidx( -1) end),
awful.key({ modkey, "Control" }, "j", function () awful.screen.focus_relative( 1) end),
awful.key({ modkey, "Control" }, "k", function () awful.screen.focus_relative(-1) end),
awful.key({ modkey, }, "u", awful.client.urgent.jumpto),
awful.key({ modkey, }, "Tab",
function ()
awful.client.focus.history.previous()
if client.focus then
client.focus:raise()
end
end),
-- Standard program
awful.key({ modkey, }, "Return", function () awful.util.spawn(terminal) end),
awful.key({ modkey, "Control" }, "r", awesome.restart),
awful.key({ modkey, "Shift" }, "q", awesome.quit),
awful.key({ modkey, }, "l", function () awful.tag.incmwfact( 0.05) end),
awful.key({ modkey, }, "h", function () awful.tag.incmwfact(-0.05) end),
awful.key({ modkey, "Shift" }, "h", function () awful.tag.incnmaster( 1) end),
awful.key({ modkey, "Shift" }, "l", function () awful.tag.incnmaster(-1) end),
awful.key({ modkey, "Control" }, "h", function () awful.tag.incncol( 1) end),
awful.key({ modkey, "Control" }, "l", function () awful.tag.incncol(-1) end),
awful.key({ modkey, }, "space", function () awful.layout.inc(layouts, 1) end),
awful.key({ modkey, "Shift" }, "space", function () awful.layout.inc(layouts, -1) end),
awful.key({ modkey, "Control" }, "n", awful.client.restore),
-- Dropdown terminal
awful.key({ modkey, }, "z", function () scratch.drop(terminal) end),
-- Widgets popups
-- Volume control
awful.key({ "Control" }, "Up", function ()
awful.util.spawn("amixer set Master playback 1%+", false )
vicious.force({ volumewidget })
end),
awful.key({ "Control" }, "Down", function ()
awful.util.spawn("amixer set Master playback 1%-", false )
vicious.force({ volumewidget })
end),
awful.key({ "Control" }, "m", function ()
awful.util.spawn("amixer set Master playback mute", false )
vicious.force({ volumewidget })
end),
awful.key({ "Control" }, "u", function ()
awful.util.spawn("amixer set Master playback unmute", false )
vicious.force({ volumewidget })
end),
awful.key({ altkey, "Control" }, "m", function ()
awful.util.spawn("amixer set Master playback 100%", false )
vicious.force({ volumewidget })
end),
-- Music control
awful.key({ altkey, "Control" }, "Up", function ()
awful.util.spawn( "mpc toggle", false )
vicious.force({ mpdwidget } )
end),
awful.key({ altkey, "Control" }, "Down", function ()
awful.util.spawn( "mpc stop", false )
vicious.force({ mpdwidget } )
end ),
awful.key({ altkey, "Control" }, "Left", function ()
awful.util.spawn( "mpc prev", false )
vicious.force({ mpdwidget } )
end ),
awful.key({ altkey, "Control" }, "Right", function ()
awful.util.spawn( "mpc next", false )
vicious.force({ mpdwidget } )
end ),
-- Copy to clipboard
awful.key({ modkey, }, "c", function () os.execute("xsel -p -o | xsel -i -b") end),
-- User programs
awful.key({ modkey, }, "q", function () awful.util.spawn( "dwb", false ) end),
awful.key({ modkey, "Control" }, "m", function () awful.util.spawn( terminal .. " -g 130x30 -e mutt", false ) end),
awful.key({ modkey, }, "s", function () awful.util.spawn(gui_editor) end),
awful.key({ modkey, "Control" }, "f", function () awful.util.spawn( terminal .. " -depth 16 -g 130x30 -e ranger", false ) end),
awful.key({ modkey, "Control" }, "v", function () awful.util.spawn( "/usr/local/bin/video", false) end),
-- awful.key({ modkey, }, "d", function () awful.util.spawn( "spacefm", false ) end),
-- Conky
-- Prompt
awful.key({ modkey }, "r", function () mypromptbox[mouse.screen]:run() end),
awful.key({ modkey }, "x",
function ()
awful.prompt.run({ prompt = "Run Lua code: " },
mypromptbox[mouse.screen].widget,
awful.util.eval, nil,
awful.util.getdir("cache") .. "/history_eval")
end)
clientkeys = awful.util.table.join(
awful.key({ modkey, }, "f", function (c) c.fullscreen = not c.fullscreen end),
awful.key({ modkey, "Shift" }, "c", function (c) c:kill() end),
awful.key({ modkey, "Control" }, "space", awful.client.floating.toggle ),
awful.key({ modkey, "Control" }, "Return", function (c) c:swap(awful.client.getmaster()) end),
awful.key({ modkey, }, "o", awful.client.movetoscreen ),
awful.key({ modkey, }, "t", function (c) c.ontop = not c.ontop end),
awful.key({ modkey, }, "n",
function (c)
-- The client currently has the input focus, so it cannot be
-- minimized, since minimized clients can't have the focus.
c.minimized = true
end),
awful.key({ modkey, }, "m",
function (c)
c.maximized_horizontal = not c.maximized_horizontal
c.maximized_vertical = not c.maximized_vertical
end)
-- Compute the maximum number of digit we need, limited to 9
keynumber = 0
for s = 1, screen.count() do
keynumber = math.min(9, math.max(#tags[s], keynumber));
end
-- Bind all key numbers to tags.
-- Be careful: we use keycodes to make it works on any keyboard layout.
-- This should map on the top row of your keyboard, usually 1 to 9.
for i = 1, keynumber do
globalkeys = awful.util.table.join(globalkeys,
awful.key({ modkey }, "#" .. i + 9,
function ()
screen = mouse.screen
if tags[screen][i] then
awful.tag.viewonly(tags[screen][i])
end
end),
awful.key({ modkey, "Control" }, "#" .. i + 9,
function ()
screen = mouse.screen
if tags[screen][i] then
awful.tag.viewtoggle(tags[screen][i])
end
end),
awful.key({ modkey, "Shift" }, "#" .. i + 9,
function ()
if client.focus and tags[client.focus.screen][i] then
awful.client.movetotag(tags[client.focus.screen][i])
end
end),
awful.key({ modkey, "Control", "Shift" }, "#" .. i + 9,
function ()
if client.focus and tags[client.focus.screen][i] then
awful.client.toggletag(tags[client.focus.screen][i])
end
end))
end
clientbuttons = awful.util.table.join(
awful.button({ }, 1, function (c) client.focus = c; c:raise() end),
awful.button({ modkey }, 1, awful.mouse.client.move),
awful.button({ modkey }, 3, awful.mouse.client.resize))
-- Set keys
root.keys(globalkeys)
-- Rules
awful.rules.rules = {
-- All clients will match this rule.
{ rule = { },
properties = { border_width = beautiful.border_width,
border_color = beautiful.border_normal,
focus = true,
keys = clientkeys,
buttons = clientbuttons,
size_hints_honor = false
{ rule = { class = "MPlayer" },
properties = { floating = true } },
{ rule = { name = "PlayOnLinux" },
properties = { tag = tags[1][1] } },
{ rule = { instance = "urxvt", class = "URxvt" },
properties = { tag = tags[1][2] } },
{ rule = { class = "Sublime_text" },
properties = { tag = tags[1][4] } },
{ rule = { instance = "urxvt", class = "URxvt", name = "sabcurses.py"},
properties = { tag = tags[1][5] } },
{ rule = { instance = "urxvt", class = "URxvt", name = "ranger"},
properties = { tag = tags[1][2] } },
{ rule = { instance = "urxvt", class = "URxvt", name = "weechat"},
properties = { tag = tags[1][3] } },
{ rule = { instance = "urxvt", class = "URxvt", name = "mutt" },
properties = { tag = tags[1][3] } },
{ rule = { instance = "urxvt", class = "URxvt", name = "htop" },
properties = { tag = tags[1][2] } },
{ rule = { instance = "urxvt", class = "URxvt", name = "cdw" },
properties = { tag = tags[1][2] } },
{ rule = { instance = "urxvt", class = "URxvt", name = "transmission-remote-cli"},
properties = { tag = tags[1][5] } },
{ rule = { instance = "urxvt", class = "URxvt", name = "vlc"},
properties = { tag = tags[1][4] } },
{ rule = { class = "Conky" },
properties = {
floating = true,
sticky = true,
ontop = false,
border_width = 0,
focusable = false,
size_hints = {"program_position", "program_size"}
{ rule = { class = "Ghb" },
properties = { tag = tags[1][1] } },
{ rule = { class = "Devede" },
properties = { tag = tags[1][1] } },
{ rule = { name = "LibreOffice"},
properties = { tag = tags[1][4] } },
{ rule = { class = "Gimp" },
properties = { tag = tags[1][1],
floating = true } },
-- Signals
-- Signal function to execute when a new client appears.
client.connect_signal("manage", function (c, startup)
-- Enable sloppy focus
c:connect_signal("mouse::enter", function(c)
if awful.layout.get(c.screen) ~= awful.layout.suit.magnifier
and awful.client.focus.filter(c) then
client.focus = c
end
end)
if not startup then
-- Set the windows at the slave,
-- i.e. put it at the end of others instead of setting it master.
-- awful.client.setslave(c)
-- Put windows in a smart way, only if they does not set an initial position.
if not c.size_hints.user_position and not c.size_hints.program_position then
awful.placement.no_overlap(c)
awful.placement.no_offscreen(c)
end
end
local titlebars_enabled = false
if titlebars_enabled and (c.type == "normal" or c.type == "dialog") then
-- Widgets that are aligned to the left
local left_layout = wibox.layout.fixed.horizontal()
left_layout:add(awful.titlebar.widget.iconwidget(c))
-- Widgets that are aligned to the right
local right_layout = wibox.layout.fixed.horizontal()
right_layout:add(awful.titlebar.widget.floatingbutton(c))
right_layout:add(awful.titlebar.widget.maximizedbutton(c))
right_layout:add(awful.titlebar.widget.stickybutton(c))
right_layout:add(awful.titlebar.widget.ontopbutton(c))
right_layout:add(awful.titlebar.widget.closebutton(c))
right_layout:add(awful.titlebar.widget.closebutton(c))
-- The title goes in the middle
local title = awful.titlebar.widget.titlewidget(c)
title:buttons(awful.util.table.join(
awful.button({ }, 1, function()
client.focus = c
c:raise()
awful.mouse.client.move(c)
end),
awful.button({ }, 3, function()
client.focus = c
c:raise()
awful.mouse.client.resize(c)
end)
-- Now bring it all together
local layout = wibox.layout.align.horizontal()
layout:set_left(left_layout)
layout:set_right(right_layout)
layout:set_middle(title)
awful.titlebar(c):set_widget(layout)
end
end)
client.connect_signal("focus", function(c) c.border_color = beautiful.border_focus end)
client.connect_signal("unfocus", function(c) c.border_color = beautiful.border_normal end)@Prezioso: sorry about that i will upload some screenshots about error
Sloved. Thank you very much. urxvt not install, i change terminal to gnome-terminal.
I have one question about themes for copycat-killer. This is github https://github.com/copycat-killer/awesome-copycats.
I can't use his themes althought installed fonts are Terminus (Multicolor, Powerarrow Darker) and Tamsyn (other ones).
Then I copy them to ~/.fonts and use command " fc-cache -fv ". after that restart awesome but error font. What wrong i do. ?
this is my calendar.lua file
Licensed under GNU General Public License v2
* (c) 2013, Luke Bonham
local icons_dir = require("lain.helpers").icons_dir
local awful = require("awful")
local beautiful = require("beautiful")
local naughty = require("naughty")
local io = { popen = io.popen }
local os = { date = os.date }
local tonumber = tonumber
local setmetatable = setmetatable
-- Calendar notification
-- lain.widgets.calendar
local calendar = {}
local cal_notification = nil
function calendar:hide()
if cal_notification ~= nil then
naughty.destroy(cal_notification)
cal_notification = nil
end
end
function calendar:show(t_out, inc_offset, scr)
calendar:hide()
local offs = inc_offset or 0
local tims = t_out or 0
local f, c_text
local today = tonumber(os.date('%d'))
local init_t = calendar.cal .. ' | sed -r -e "s/(^| )( '
calendar.offset = calendar.offset + offs
if offs == 0 or calendar.offset == 0
then -- current month showing, today highlighted
if today >= 10
then
init_t = calendar.cal .. ' | sed -r -e "s/_\\x08//g" | sed -r -e "s/(^| )('
end
calendar.offset = 0
calendar.notify_icon = calendar.icons .. today .. ".png"
-- bg and fg inverted to highlight today
f = io.popen( init_t .. today ..
')($| )/\\1<b><span foreground=\\"'
.. calendar.bg ..
'\\" background=\\"'
.. calendar.fg ..
'\\">\\2<\\/span><\\/b>\\3/"' )
else -- no current month showing, no day to highlight
local month = tonumber(os.date('%m'))
local year = tonumber(os.date('%Y'))
month = month + calendar.offset
if month > 12 then
month = month % 12
year = year + 1
if month <= 0 then
month = 12
end
elseif month < 1 then
month = month + 12
year = year - 1
if month <= 0 then
month = 1
end
end
calendar.notify_icon = nil
f = io.popen(calendar.cal .. ' ' .. month .. ' ' .. year)
end
c_text = "<tt><span font='" .. calendar.font .. " "
.. calendar.font_size .. "'><b>"
.. f:read() .. "</b>\n\n"
.. f:read() .. "\n"
.. f:read("*a"):gsub("\n*$", "")
.. "</span></tt>"
f:close()
cal_notification = naughty.notify({
text = c_text,
icon = calendar.notify_icon,
position = calendar.position,
fg = calendar.fg,
bg = calendar.bg,
timeout = tims,
screen = scr or 1
end
function calendar:attach(widget, args)
local args = args or {}
calendar.cal = args.cal or "/usr/bin/cal"
calendar.icons = args.icons or icons_dir .. "cal/white/"
calendar.font = args.font or beautiful.font:sub(beautiful.font:find(""),
beautiful.font:find(" "))
calendar.font_size = tonumber(args.font_size) or 11
calendar.fg = args.fg or beautiful.fg_normal or "#FFFFFF"
calendar.bg = args.bg or beautiful.bg_normal or "#FFFFFF"
calendar.position = args.position or "top_right"
calendar.scr_pos = args.scr_pos or 1
calendar.offset = 0
calendar.notify_icon = nil
widget:connect_signal("mouse::enter", function () calendar:show(0, 0, scr_pos) end)
widget:connect_signal("mouse::leave", function () calendar:hide() end)
widget:buttons(awful.util.table.join( awful.button({ }, 1, function ()
calendar:show(0, -1, scr_pos) end),
awful.button({ }, 3, function ()
calendar:show(0, 1, scr_pos) end),
awful.button({ }, 4, function ()
calendar:show(0, -1, scr_pos) end),
awful.button({ }, 5, function ()
calendar:show(0, 1, scr_pos) end)))
end
return setmetatable(calendar, { __call = function(_, ...) return create(...) end })
Thank everyone.
Last edited by zyzzvn (2015-02-04 14:55:21) -
"ORA-29532: Java call terminated by uncaught Java exception
Dear Oracle:
I am trying to establish an HTTPS connection from a Java stored
procedure that is wrapped in a PL/SQL procedure and loaded into a
Package. We are running on Oracle 8.1.7.
My Java code compiles and runs fine when run stand-alone outside
Oracle; I can establish the connection to a secure server and talk to
the server. However when I load this Java class (using the loadjava
utility) this class can no longer run and I get a the following
exception:
"ORA-29532: Java call terminated by uncaught Java exception:
javax.net.ssl.SSLException: SSL handshake failed:
X509CertChainIncompleteErr"
I have tried loading the JSSE from Sun and I still get the same error.
Searching in the Discussing Forums I found the following link (which
describes a procedure that logs into the UPS secure server site and
grabs some XML) http://osi.oracle.com/~mbpierma/SSL_Java_DB.html .
This code works ok if we try to connect to UPS server. However this
code doesn't work if we try to log in to a different server (such as
???). If I modify this code slightly and try to log to any other
sever server I get the same error as the one above. Investigation
lead us to understand that the certificate at the UPS web site is a
self-signed certificate -- not one generated by a major 'recognized'
authority such as Verisign or Thawte.
Further research pointed me to the following URL
http://www.znow.com/sales/oracle/network.816/a76932/appf_ora.htm#619367
This URL has the documentation for JAVA SSL for 8.1.6 which I figure
I could read and try to make it work in 8.1.7.
I looked at your Secure Hello World example, however the code is
missing the most critical parts of the whole example, it does not
specify where the certificate or any of the security settings come
from (see the attached JavaCertExample.txt file).
So, my questions are the following:
1) What should I do to avoid the error mentioned above?
2) Do you have a sample piece of code that describes how to make a
HTTPS connection using a Java stored procedure?
3) Can I make the HTTPS connection using a URL class and not using
sockets directly?
4) Do I need to load the JSEE provided by Sun?
5) Will the solution be different for Oracle 9i?
// SecureHelloClient.java
import java.net.*;
import java.io.*;
import java.util.*;
import javax.net.ssl.*;
import javax.security.cert.X509Certificate;
import oracle.security.ssl.OracleSSLCredential;
import oracle.security.ssl.OracleSSLSocketFactory;
import oracle.security.ssl.OracleSSLProtocolVersion;
import oracle.security.ssl.OracleSSLSession;
public class SecureHelloClient
public static void main(String argv[])
String hostName = "localhost";
if(argv.length != 0)
String hostName = argv[0];
// Set the SSLSocketFactoryImpl class as follows:
java.util.Properties prop = System.getProperties();
prop.put("SSLSocketFactoryImplClass",
"oracle.security.ssl.OracleSSLSocketFactoryImpl");
try
// Get the default socket factory
OracleSSLSocketFactory sSocFactory
= (OracleSSLSocketFactory)SSLSocketFactory.getDefault();
sSocFactory.setSSLProtocolVersion(OracleSSLProtocolVersion.SSL_Version_3_0);
OracleSSLCredential sslCredObj = new OracleSSLCredential();
// Where did these values come from? caCert, userCert, trustedCert,
// Set the certificate chain and private key if the
// server requires client authentication
sslCredObj.addCertChain(caCert)
sslCredObj.addCertchain(userCert)
sslCredObj.setPrivateKey(userPvtKey, userPassword)
// Populate credential object
sslCredObj.addTrustedCert(trustedCert);
sSocFactory.setSSLCredentials(sslCredObj);
// Create the socket using factory
SSLSocket jsslSoc =
(SSLSocket)sSocFactory.createSocket(hostName, 8443);
String [] ciphers = jsslSoc.getSupportedCipherSuites() ;
// Select the ciphers you want and put them.
// Here we will put all availabel ciphers
jsslSoc.setEnabledCipherSuites(ciphers);
// We are creating socket in client mode
jsslSoc.setUseClientMode(true);
// Do SSL handshake
jsslSoc.startHandshake();
// Print negotiated cipher
System.out.println("Negotiated Cipher Suite: "
+jsslSoc.getSession().getCipherSuite());
System.out.println("");
X509Certificate[] peerCerts
= ((javax.net.ssl.SSLSocket)jsslSoc).getSession().getPeerCertificateChain();
if (peerCerts != null)
System.out.println("Printing server information:");
for(int i =0; i ? peerCerts.length; i++)
System.out.println("Peer Certificate ["+i+"] Information:");
System.out.println("- Subject: " + peerCerts.getSubjectDN().getName());
System.out.println("- Issuer: " + peerCerts[i].getIssuerDN().getName());
System.out.println("- Version: " + peerCerts[i].getVersion());
System.out.println("- Start Time: " + peerCerts[i].getNotBefore().toString());
System.out.println("- End Time: " + peerCerts[i].getNotAfter().toString());
System.out.println("- Signature Algorithm: " + peerCerts[i].getSigAlgName());
System.out.println("- Serial Number: " + peerCerts[i].getSerialNumber());
else
System.out.println("Failed to get peer certificates");
// Now do data exchange with client
OutputStream out = jsslSoc.getOutputStream();
InputStream in = jsslSoc.getInputStream();
String inputLine, outputLine;
byte [] msg = new byte[1024];
outputLine = "HELLO";
out.write(outputLine.getBytes());
int readLen = in.read(msg, 0, msg.length);
if(readLen > 0)
inputLine = new String(msg, 0, readLen);
System.out.println("");
System.out.println("Server Message:");
System.out.println(inputLine );
else
System.out.println("Can't read data from client");
// Close all sockets and streams
out.close();
in.close();
jsslSoc.close();
catch(SSLException e)
System.out.println("SSL exception caught:");
e.printStackTrace();
catch(IOException e)
System.out.println("IO exception caught:");
e.printStackTrace();
catch(Exception e)
System.out.println("Exception caught:");
e.printStackTrace();Hi,
I have the same problem.
Is some ORACLE guru that can help us ?
We need to communicate with some servlet
via POST method of https (SSL3)
and with using private certificate on the client site.
We need furthermore allow using of some proxy.
Client site is realized as set of stored procedures within ORACLE 8.1.7
In this time I am able to communicate with server without SSL and certificate
using package utl_tcp
(but with this solution without certificate is our customer not satisfied -:))
ORACLE help us please !
Pavel Pospisil
[email protected] -
I get this after downloading a movie: "The selected movie won't play on one of your connected displays." What do I do?
I fixed it. I just had to unplug my second monitor and re-plug it in. All is better now.
-
Hi,
I have a requirement of calling BI webservices from Plsql stored procedure. I generated all my wsdl java classes and loaded them into the database. However, when I tried to call one of my java class using stored procedure, it is giving me"ORA-29532: Java call terminated by uncaught Java exception: java.lang.NoClassDefFoundError".
*Cause: A Java exception or error was signaled and could not be
resolved by the Java code.
*Action: Modify Java code, if this behavior is not intended.
But all my dependency classes are present in database as java class objects and are valid. Can some one help me out of this?Stiphane,
You can look in USER_ERRORS to see if there's anything more specific reported by the compiler. But, it could also be the case that everything's OK (oddly enough). I loaded the JavaMail API in an 8.1.6 database and also got bytecode verifier errors, but it ran fine. Here are the errors I got when loading Sun's activation.jar, which ended up not being a problem:
ORA-29552: verification warning: at offset 12 of <init> void (java.lang.String, java.lang.String) cannot access class$java$io$InputStream
verifier is replacing bytecode at <init> void (java.lang.String, java.lang.String):12 by a throw at offset 18 of <init> void (java.lang.String, java.lang.String) cannot access class$java$io$InputStream
verifier is replacing bytecode at <init> void (java.lang.String, java.lang.String):18 by a throw at offset 30 of <init> void (java.lang.String, java.lang.String) cannot access class$java$io$InputStream
verifier is replacing bytecode at <init> void (java.lang.String, java.lang.String):30 by a throw
Hope this helps,
-Dan
http://www.compuware.com/products/devpartner/db/oracle_debug.htm
Debug PL/SQL and Java in the Oracle Database -
Error: ORA-29532: Java call terminated by uncaught Java exception:
Anyone have this similar problem of
ORA-29532: Java call terminated by uncaught Java exception:
javax.xml.rpc.soap.SOAPFaultException: Caught exception while handling request:
deserialization error: XML reader error: unexpected character content:
"A"
The service is running fine in a browser and returns the date. When I run it using the PL/SQL it has the error mentioned above.
I am running the following:
CREATE OR REPLACE FUNCTION GetDate_wb( p_dummy IN VARCHAR2 )
RETURN DATE
AS
l_service sys.UTL_DBWS.service;
l_call sys.UTL_DBWS.call;
l_result ANYDATA;
l_wsdl_url VARCHAR2(1024);
l_service_name VARCHAR2(200);
l_operation_name VARCHAR2(200);
l_input_params sys.UTL_DBWS.anydata_list;
l_port sys.UTL_DBWS.qname := 8988;
BEGIN
l_wsdl_url := 'http://org-lblakisa1:8988/BPEL_OD-LoginWS-context-root/getDate1SoapHttpPort?WSDL';
l_service_name := 'getDate1';
l_operation_name := 'getDate';
l_service := sys.UTL_DBWS.create_service (
wsdl_document_location => URIFACTORY.getURI(l_wsdl_url),
service_name => l_service_name);
l_call := sys.UTL_DBWS.create_call (
service_handle => l_service,
port_name => NULL,
operation_name => l_operation_name);
l_input_params(1) := ANYDATA.ConvertVarchar2(p_dummy);
l_result := sys.UTL_DBWS.invoke (
call_handle => l_call,
input_params => l_input_params);
sys.UTL_DBWS.release_call (call_handle => l_call);
sys.UTL_DBWS.release_service (service_handle => l_service);
RETURN ANYDATA.AccessDate(l_result);
END;
/Problem is resolved... We had a version issue in that 10.1.3 web service is not compatible. 10.1.2 worked.
-
Java call terminated by uncaught Java exception: java.lang.NullPointerExcep
i have written this program of adding file items using wwsbr_api.add_item but,
1 declare
2 l_new_item_master_id number;
3 l_caid number := 53;
4 l_folder_id number := 50279;
5 begin
6 select c.id, f.id
7 into l_caid, l_folder_id
8 from portal.wwsbr_all_content_areas c,
9 portal.wwsbr_all_folders f
10 where c.id = f.caid and c.name = 'S_T_PAGE'
11 and f.name = 'S_PAGE';
12 --portal.wwctx_api_private.set_context('PORTAL');
13 l_new_item_master_id := portal.wwsbr_api.add_item(
14 p_caid => l_caid,
15 p_folder_id => l_folder_id,
16 p_display_name => 'simple file item',
17 p_type_id => portal.wwsbr_api.ITEM_TYPE_FILE,
18 p_type_caid => portal.wwsbr_api.SHARED_OBJECTS,
19 p_region_id => 4571,
20 p_file_filename => 'D:\ora\training\html\frame.html'
21 );
22 -- process cache invalidation messages
23 portal. wwpro_api_invalidation.execute_cache_invalidation;
24* end;
SQL> /
this program is showing the following exception. kindly give the solution urgently..........
declare
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception: java.lang.NullPointerException
ORA-06512: at "PORTAL.WWSBR_API", line 37
ORA-06512: at "PORTAL.WWSBR_API", line 610
ORA-06512: at line 13can any one of u please give me the reply to the above error,
urgently............. -
My iPhone 3gs got an update today ios 6.1.6 but when i press install update my phone shutdown and shows connect to itunes display, after i connect to itunes it shows unknown erro (306).....whats is happening and what should i do ?
Take a look at this post: https://discussions.apple.com/thread/5036467?tstart=0
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences(PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, seeiTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
For more information on other security software, see iTunes: Troubleshooting security software issues. -
UCCE 8.5 Call Terminator information (who ended the call?)
Dear Team,
We're working with UCCE 8.5 with CVP 8.5 in a comprehensive model. We're using SIP signalling too.
We do have a call recording and evaluation solution which is recording agents calls. This application is providing the call terminator information. The issue that this application is not providing the correct call terminator !!
It's an application using SCCP sniffing, but it seems that CCM doesn't give such information.
We would like to know if we UCCE offer such information somehow (in the database for exemple.
Can you please advice ?
Thanks for your help in advance.
Best Regads.Hello,
In the TCD (Termination Call Detail) table which you can find in the HDS database, you can find a column called "CallDisposition". This column contains codes that refer to how the call was ended (i.e. Call Disposition code of 52 refers to "Called Party Disconnected").
Reference: CTI Server Reference Guide
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/ipcc_enterprise/ipccenterprise8_0_1/configuration/guide/ctisvr80.pdf
Also, you can find many posts on this forum relating to "Call Disposition" (i.e. https://supportforums.cisco.com/message/3490321)
1. If the customer disconnects the call, the Call disposition of the call(all 3 legs) will be 13.2. If the agent disconnects the call, the second call leg disposition is 52 and other 2 is 13
Hope this helps,
Justine. -
Blob writing error ORA-29532 Java call terminated Unsupported feature
Hi there,
I've got the following Java code which tries to write to a BLOB file. It's a version of some code to extract files from a zip archive, but with everything but the erroring call stripped out:
create or replace and compile java source named zipunpack as
package org.bristol.cyps;
import oracle.sql.BLOB;
import java.util.zip.*;
public class ZipUnpack
public static int unpack(BLOB ziparray[], String filename, BLOB filearray[])
throws java.sql.SQLException, java.io.IOException
BLOB file = filearray[0];
java.io.OutputStream fileout = file.setBinaryStream(0L);
return 1;
This is published as follows:
create or replace function zip_unpack (
pio_zip in out nocopy blob
, pi_filename in varchar2
, pio_file in out nocopy blob
) return number as language java
name 'org.bristol.cyps.ZipUnpack.unpack(oracle.sql.BLOB[], java.lang.String, oracle.sql.BLOB[]) return java.lang.Integer';
And called like so:
procedure send_zip_file (
pi_zip in out nocopy blob
, pi_filename in varchar2
) is
file blob;
completed integer;
begin
dbms_lob.createtemporary (
lob_loc => file
, cache => false
, dur => dbms_lob.call
completed := zip_unpack(pi_zip, pi_filename, file);
if completed > 0 then
bare_html.print_blob(file);
else
htp.print('File "' || pi_filename || '" not found');
end if;
end;
This, as far as I can tell from the documentation, should work. Unfortunately, though, it generates an error:
ORA-29532: Java call terminated by uncaught Java exception: java.sql.SQLException: Unsupported feature
The particular line which is causing the error is the "java.io.OutputStream fileout = file.setBinaryStream(0L);" If I remove this, it runs fine. I'm flumoxed as to why this might be causing an "Unsupported feature" exception when it's documented as being supported. Can anyone shed any light?
Cheers,
Robert
Message was edited for more clarityHi,
It looks like you are not using 10g JDBC. java.sql.Blob.setBinaryStream is a JDBC 3.0 method. In 9iR2 we added support for jdk14 and added stub methods for JDBC 3.0 behavior without fully implementing them. 10gR1 was the first version where the JDBC3.0 methods were fully supported.
The workaround is to use the Oracle proprietary method oracle.sql.BLOB.getBinaryOutputStream
Kuassi, http://db360.blogspot.com -
Today, I received this error when I re-added two email accounts that are tied in to my domain. The error is: "Terminating app due to uncaught exception 'MFSQLiteException', reason: 'inserting mailbox url' abort() called terminating with uncaught exception of type NSException"
Two days ago, at my wits end with email issues, I googled how to Reset Mail.app and followed the recommendation found here: https://discussions.apple.com/thread/2266399?tstart=0
That's. all. I've. done.
What should I do correct the error I'm receiving when adding my email accounts?Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
My iPhone (iPhone 5S) getting green display after one second going to switch off then automatically ON during FaceTime call. My OS version now 7.0.4. I think recent update actually to fix the above issue but still continues.
Similar issue Andrew. After installing 8.0, the IOS deleted 225 songs from one of my playlists, and I'm still "recalling" songs that are no longer in my Music Library. Fortunately, although the playlist of 235 had only 6 songs left on it ( on my Mac), the Playlist was not erased from my I -Phone. I was able to recreate the Playlist on my Mac, using the intact playlist on my phone. When I synched however, I was back to square one. I went to the Apple store, and I had to reset the phone . We also downloaded IOS 8.02. They saved my playlist in the Cloud, deleted it from my Mac, then synched it. Lo and behold, the playlist I recreated on my Mac, synched to my I Phone. After the reset, I had like 11GB of free space. (Its been 5 days since the "reset" and the number of GBs fluctuates from day to day !!)
When I got home from the Apple store I spent after hours reinstalling all the apps, synchng the phone to the Bluetooth in my car ( you know the rest of the saga) , I purchased a song from I Tunes. I "drag and dropped" it into a Playlist, and synched. Didn't work. Song shows in "Recently Added", but the drag and drop feature doesn't work. Bottom line, I'm not willing to "reset" my phone every time I add a song ! I've tried any number of fixes posted to this support community, but none have worked for me.
Furthermore, it took me 3 hours to get the phone re-synched to the Bluetooth system in my car. However every time I connect to "Bluetooth Audio", the system needs to "find" and "reconnect to" my phone. If you ( or anyone else ) finds something that might work for both the music synch and /or the Bluetooth, I'd appreciate your input.
Thanks, Lorenzo -
My Mac mini didn't display after the grey startup screen so I took it to the store. They got it working. At home it didn't work. I called Apple. They troubleshot with me on the phone then said they'd get me a new one.
The new Mac mini started up fine and worked earlier today, even with restarts, but now it is not working.
After grey startup, I get a solid blue screen, with no mouse, no icons. This is what happened before.
My display is a ViewSonic professional. It's a GREAT monitor and I'd hate to give it up.Get this. I'm having the same problem with my ViewSonic, the second time in about 10 days, except the problem is also present when I hook up a generic display I use on an old PC. When I plug in the generic display, it puts up a message stating something like both input signals are not working.
My fix was to use a new adapter plug for the monitor that shipped with my Mac G5 at work. I plugged it in and it fixed the problem, but now it's doing the same thing. I though perhaps the ViewSonic was overloading the adapter and frying it.
Ideas? -
Additinal tab B in sales Order header not displayed after EHP5 upgrade
Hello Everyone,
I am facing an issue that the 'Additional data B' in the sales order header is not getting displayed after we ugraded to EHP5.
We found the issue , that the screen '8309' provided by SAP for the additional data in SO header is not getting called.The call is made from screen '4312' but the call subscreen screen statement fails.
This might be because these screens were modified (both '4312' and '8309' )using the Access key to accomodate more fields in the screen then originally provided. And SAP does not support for this modification as given in the SAPnote 170183.
Now the question is how can I restore the existing functionality?
PROCESS BEFORE OUTPUT.
Verarbeitung vor der Ausgabe
Kopfdaten vorbereiten
MODULE VBAK_BEARBEITEN_VOR.
PBO-Aufruf des Kunden-Subscreens "Kopf-Zusatzdaten B"
CALL SUBSCREEN 8309 INCLUDING 'SAPMV45A' '8309'.
PROCESS AFTER INPUT.
Verarbeitung nach der Eingabe
PAI-Aufruf des Kunden-Subscreens "Kopf-Zusatzdaten B"
CALL SUBSCREEN 8309. <----This statement fails
Alle Felder in der Bearbeiten-Kette
MODULE VBAK_BEARBEITEN.
Please advice.
Regards
AbhishekHi
Do you see SAP Note 302497 - Additional cust. fields not displayed in 'Additional data B'?
Regards
Eduardo
Maybe you are looking for
-
Exactly as it says above. The computer was given to me as a gift, and the person who gave it to me had already bought photoshop and put it on for me. Photoshop was working perfectly before AVG did the computer scan, and now every time i try to use it
-
Hi, I have adobe acrobat pro 9 (yes older version) with error to convert from word
on win7 64bit. but when I try to convert a word file to pdf. I get error PDF MAKER. When I print a test page from word to pdf printer it does correct. Word is 2007 When I go to my acrobat. And I press combine from word I get the error. When I combine
-
New file server--Can InDesign be switched to new path?
We've installed a new server with new IP address and new volume name. Is there an easy way to tell InDesign that the same folder/file structure is now to be found at the new server address (or volume name), so we won't have to relink any files within
-
I have a master table and a detail table. I need to delete a set of records from both the master and detail tables based on a criteria. Now if I delete from one table then I will not know which records I have to delete from the other table. So the re
-
Restoring iphone, forgot password
so i forgot my password to unlock my phone, and i plug it in to itunes and restore it but in order to restore it i have to update it so i download the update which says it'll take 3 hours. and i dont really have good connection so my internet goes on