Call contact at one or two strokes

nokia asha 210. When I type a number and symbol #(example 1#) one of my contact's number comes up. I would like tis number whilch comes up should be my preferred contact's cell number and preferably with name

index# is a standard ETSI/3GPP command which fetches the corresponding index on your SIM phone book. Therefore, if you edit your SIM with a SIM reader, you are able to select which phone number shall come up. When it comes to the name display … that is an interesting feature request for platform like Series 30+ because the development of Series 40 ceased last year.

Similar Messages

Stopping call forwarding on one of two numbers?

HI,
I have two Sype numbers, the main one for the UK and a new one that I bought a couple of months ago, a Hong Komg number.
The HK number used to be used by a tourism website, and although they have changed their main number on their website, references to the old number still exist in a few places and I get calls, sometimes several a day to the number.
I have contacted the company in HK twice and asked them to clear up the problem, but I suspect that the calls come from external websites that they don't control and are unable to remove the numbers.
So, I would like to stop call forwarding on one of my numbers, but it doesn't seem like this is possible, which is obviously ridiculous but hey ho.
I am therefore trying to cancel the HK number, but when I go to the cancel page and hit cancel the page just reloads without doing anything. I also believe that the number stays valid until the yearly payment runs out.
Questions then, can I cancel the number and peoperly kill it, so I stop getting these calls?
Many thanks,
Tom.

Hello and welcome to the Skype Community.
Checking your options. Canceling the HK Number wouldn't be effective until it expires on February 16th 2016, Which error message [if any] do you receive when you try to cancel call forwarding to the HK Number?
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Nokia 5800 - cannot see caller contact name (one m...

This is a repeat of the question asked and seemingly "solved" here:
I'm starting a new topic cause the label for the topic mentioned above says "solved" in nice big green letters so people might miss this issue being raised again.
I have a 5800 XM (RM-356, software V51.0.006) with 250+ contacts...
The problem appears as in the case above, happens daily: I get a call from a number which is definitely in my contacts (phone memory, not SIM) but I still just get the number displayed and not the name of the caller.
Furthermore, if I then take the callers number as reported by my phone (with the '+' for international and all), and update the contact, nothing improves, same thing.
It gets better : my wife has the same number for her cell phone and home phone, with a different area code (smart, eh?). There Nokia definitely confuses the two, only if I erase one of them then I get her name when she is calling, though the numbers are definitely different, e.g.:
+38111XXXXXXX and +38165XXXXXXX (in the example the +381 is Serbia, and 11 and 65 are two different area codes).
This issue is driving me nuts, and not because I can't recognize my wifes number , but because of the OTHER 250+ business contacts that I get calls from daily!
I have tried everything, including doing a "hard reset" of the whole phone... not to mention it took me hours to get everything else but the contact list back to previous settings....
What is wrong here?
There has also been this advice on the Nokia forum :
unfortunately, tried all of it, and nothing worked.
To further complicate the matter, this problem appears only for a fraction of the numbers in my contact lists = some contacts I see names just fine when they call, and some I cannot get to show up no matter what...
Many thanks for all your help!

It is simply multiple entries, as you have no doubt read about, for example if you entered all your wifes numbers just to your wifes name, but as individual details they would work. So say the contact is Wife, select option edit, add detail, then you can have Mobile , home and work numbers all attached to that one contact, and caller id will work, as long as you don't have several of her work colleagues as contacts with the same works number, the failure of caller id is always due to a conflict, as the phone can only identify the number (the incoming info) and if that is attached to more than one person it just gives out the number.
To resolve the problem you need to find and remove the conflicts !
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

How can I restore my contacts, when I have two phpnes on one account? In icloud are the contacts of the first phone, and in my computer is the back up of my second phone

How can I restore my comtacts from pc back up when I do have two phones with one account?the i cloud has contacts from one of the phones, and the pc back up from the other?

Hi Silky-Milky!
If I understand your question correctly, you are attempting to merge your contacts from your previous phone's backup into your iCloud account, then go back to using your new phone as normal, with the new merged database of contacts. I have an article that can tell you how to do exactly that:
Recovering iCloud or MobileMe data from iTunes backups for an iOS device
http://support.apple.com/kb/TS4108
Take care, and thanks for visiting the Apple Support Communities.
-Braden

I have two phones with one apple id i have lost most of my contacts from one of them

i have two phones with the same apple id but i have lost most of my contacts from one phone

Apps are tied to the Apple Id they were purchased with. So any updates for the Apps will ask for that apple ID to update.
The only way to prevent this is if you remove all the Apps that were purchased with your ID from the iPad.

TS4002 I have two mail accounts. One is called icloud and one is called Icloud. How do I get rid of the Icloud account without removing the icloud account?

Under Mailboxes, there is a list:
     All Inboxes
     Icloud
     iCloud
     VIP
Under Accounts
@ Icloud
(cloud symbol) iCloud
In Settings, there is only one (cloud symbol) account: iCloud
Under Settings ==> Mail, Contacts, Calendars, there are two accounts.
     iCloud is for Mail, Notes, Photos, find My iPad, Documents & Data
     Icloud is only for Mail, Notes
I can turn mail off for the Icloud account. If I turn off Notes, there is a warning: All IMAP notes will be removed from you iPad.
I can turn off mail and notes for the iCloud account. No problems
The Default Account for Notes is Icloud.
I have changed the Default Accounts for Notes to "On My iPad."   Still not able to turn of the notes in the Icloud Account.
And, now for something completely different! The multiple mail box accounts do not show up in the Mail app. There are still multiple accounts for notes.

I went to Notes. Showed all notes. Three notes are duplicated, one on iCloud and one on Icloud. I deleted one of the notes and checked to see if the other still existed. It did. I deleted the other two notes. I check all notes and found that the three notes were deleted on both accounts. The only notes on this device are under On My iPad.
I went into system settings and tried to delete the Icloud account. The warning comes up: This will delete all IMAP notes on your device. Will this also delete the notes in On My iPad?

HT5622 I have two iPhones synced with the same Apple ID and so the contacts are being shared in both of them. Is there any way to revert this?? The reason is that if I delete some contact from one device then it automatically erases from the second one as

I have two iPhones synced with the same Apple ID and so the contacts are being shared in both of them. Is there any way to revert this?? The reason is that if I delete some contact from one device then it automatically erases from the second one as well

Yes, you stop using the same Apple ID under Settings > iCloud.

HT204387 I lose my contacts on the car blue tooth after one to two weeks and have to reload them..This was only after the lates OS update.

I load my contacts from my phone to my car Blue tooth.
After one to two weeks they are no longer there and I have to reload them.
This has happene after the latest OS update.
Any suggestions?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Two phones with different contacts and one computer?

how do i go about syncing two phones, with different contacts, to one computer?

If you are using Microsoft Outlook and syncing different contacts is your concern, you can set up a new Contacts folder for your iPhone (like "Jeff's Contacts") and set iTunes to sync that folder only to your iPhone. Create a second new Contacts folder for the other iPhone's contacts and do the same thing. Works great for my iPhone and my wife's iPhone, both synced to our home computer.

What do you do when you can receive a call, but no one can hear you?

What do you do when you can receive a call, but no one can hear you?

From a Kappy post
The Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Satellite P500 PSPG8E - Bios peeps 3 time - one long two short

Hello,
I have a question: when I power on my Satelite P500 PSPG8E I get 3 Peeps: One long two short!
What is this, maybe Memory?
Thanks allot
Greetings from Germany
Michael Burkhardt

Hi Michael,
I dont know what this beep code means exactly but as you wrote, it could be a RAM issue.
Do you have two modules installed? If yes you should try to start your notebook with one module only and test each module in each slot to determine if its RAM, RAM socket or something else.
But if your notebook is under warranty the repair would be for free if you contact an ASP in your country. ;)

How can I transfer my contacts from one group to another?

I have recently discovered that most of my personal contacts have been synced with my work's MS Outlook. This brings two issues to me if I ever had to change jobs and hand over my laptop - 1) My personal contacts will be shared with an unauthorised audience, 2) If they delete my account I will never have access to my own personal contacts as well.
I tried to see how I can transfer contacts from one group to another but I can't seem to get the hang of it. Can anyone help, please? All I need to do is associate the contacts that have been associated with my work's email account to one of my personal accounts.
Thank you in advance!
Rgds
Dan

If you use an online syncing service for managing your contacts then you can simply clean up the contancts on one installation, and the changes should update on the second installation immediately. This will only work if you use iCloud, Gmail, or another service for storing your contacts.

TS2776 How can I transfer e-mail contacts from one IPad to another?

How can I transfer e-mail contacts from one IPad to another?

Depends on how big the file is. If itis only a couple of pages, or mostly text, the easiest way would be to e mail it. If it is a very large file you are going to need wifi. Take both pads to starbucks, and e mail it from there. Or if you have wifi, use drop box, for example.
Your other choice, avoiding wifi would be a bluetooth type transfer. There is an app call bluetooth file lite that reads like it will do what you need. The good news is it is free. The bad news is that it has terrible ratings. For grins, i am installing it now on a pad and a phone, and will see if it works.
With a bluetooth method, you need both devices in the same place. If you are trying to send your file across country, bluetooth will not work for you. you need e mail or drop box type solution, and if the file is big, you will almost certainly need wifi.

I apparently have more than one Apple ID. So, 1) how do I find out how many different ones exist, and 2) how can I consolidate them into one or two?

I have inadvertenly created two or more different Apple IDs. How can I learn all the different IDs associated with my email accounts or my name? How can I consolidate the different IDs into one or two?

Go to https://iforgot.apple.com/ and click the blue link "Forgot your Apple ID?"
It will result a page in which you can provide some contact information that may possibly find an existing Apple ID.
How can I consolidate the different IDs into one or two?
This cannot be accomplished.

Multiple contacts in one company?

Hi all, a quick question on something that's always bugged me. If I enter contact info for multiple employees at the same company, I can never see who those employees are when scrolling through my contact list.
For instance, I if enter the contact info for 4 people at a company called "Floserve", when scrolling through my contacts later on, all I see is 4 duplicate entrees called "Floserve". I have to select them all individually to get the iPhone to scroll to the next field where I can see each employee's name. This is a real pain with 20+ people I need to contact at one company. Is there anyway I can flag people as working at the same company, but have my contacts sorted by their names, and not the duplicated company name?

The way I handle this issue is as one poster already suggested, plus groups. First, the "company" checkbox is for companies, not really people, so it should only be used for the company's entry, not the people associated with it. You can still put the company info in each of the contacts, right where it says "company" when you edit the contact, but don't check the company checkbox.
Next, create a group for each company that has several people, and that you want to have such a group. Drag those contacts into that group. (I use smart groups to collect them: just set a condition whereby the "company" is the company's name, then drag the resulting smart groups contacts into the real group you named after the company). Now when you sync, if you're showing "All Contacts", the people will appear in their alphabetical place, and if you just want to see those who are at that company, just tap "Groups" in the upper left, and tap the group you created for that company. The list will then populate with only those who are in that company. So I have several groups like that, one for each company that has more than just a couple of names that I want to be able to get to by company.

Call contact at one or two strokes

Similar Messages

Maybe you are looking for