Call contained error(s): ADS (2)

Hi,
I have created a print form using transaction code SFP. while testing system giving me an error My form and interface showing active and no errors

Call contained error(s): ADS (2)

How to avoid this.
Sa_R

Hello,
are you sure that you have configured ADS on your J2EE engine?
Thank you for the information.
Best regards,
Dezso

Similar Messages

VETS100A - Error - "Call contained error(s):ADS(2)

Hi,
When I executed the standard VETS report using VETS 100A form, I got the error "Call contained error: ADS(2)
Message No. FPRUNX003
When I executed it with VETS 100 form, it didn't display the job codes 00 and 01
Any help is much appreciated
Thanks

Hi,
Please check the OSS note 1372977.

SHR1 - Call contained Errors

Hi,
I am getting error for SHR1 Transaction.
in SHR1 Transaction when i give Resource, and go for Generate Shift report i am getting this error.
Error Message is FPRUNX003 and call contained errors:ADS(2).
Can any one explain.
Thanks
Nag
Edited by: nag1975 on May 18, 2010 7:38 AM

Dear Nag,
transaction SHR1 need ADS as precondition. As SHR1 display the result in PDF the installation of ADS is necessary. If ADS is not implemented or not correctly implemented you get error "Error Message is FPRUNX003 and call contained errors:ADS(2)."
So please make sure adobe document services setup (ADS) is correct.
Regards
Sabine

Error Caller 09 contains error message - Data Marts loading(cube to ODS)

Dear all,
          Please ! Help me in this problem, This is very urgent.
          I have one process chain that loads data from BIW to BIW only through Data Marts. In that process chain, one process loads data from one cube(Created by us) & loads data to one ODS(also created by us). Data is loaded through full update & for the selected period specified in 'Calender Day' field in data selection.
         Previously I was able to load data for 2 months, but some days ago, suddenly one day, the process of Extraction got stuck in background for long time,& showed following error :
          Error message from the source system
          Diagnosis
         An error occurred in the source system.
          System Response
         Caller 09 contains an error message.
         Further analysis:
         The error occurred in Extractor .
         Refer to the error message.
         Procedure
         How you remove the error depends on the error message.
         Note
         If the source system is a Client Workstation, then it is possible that the file that you wanted to                load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
              Then we killed that process on server & after another attempt, It showed some calmonth...timestamp error. Then after reducing data selection period, It had been loaded successfully, after that I was able to load data for 20 days,Again after some days process got stuck,I followed the same procedure,reduced the period to 15 days & continued, Now I can't even load data for 5 Days successfully in one attempt, I have to kill that process in background & repeat it, then sometimes It get loaded.
         Pls, suggest some solutions as soon as possible. I am waiting for your reply. Points will be assigned.
         Thanks,
          Pankaj N. Kude
Edited by: Pankaj Kude on Jul 23, 2008 8:33 AM

Hi Friends !
                  I didn't find any short dump for that in ST22.
                  Actually , What happens is, Request continues to run in background for infinite time. At that time
Status Tab in Process Monitor shows this messages :
                    Request still running
                    Diagnosis
                    No errors found. The current process has probably not finished yet.
                     System Response
                     The ALE inbox of BI is identical to the ALE outbox of the source system
                       or
                     the maximum wait time for this request has not yet been exceeded
                       or
                    the background job has not yet finished in the source system.
                   Current status
                   in the source system
                    And Details Tab shows following Messages :
                    Overall Status : Missing Messages or warnings
                    Requests (Messages) : Everything OK
                            Data Request arranged
                            Confirmed with : OK
                     Extraction(Messages) ; missing messages
                            Data request received
                            Data selection scheduled
                            Missing message : Number of Sent Records
                            Missing message : selection completed
                    Transfer (IDOCS and TRFC) : Everything OK
                            Info Idoc1 : Application Document Posted
                            Info Idoc2 : Application Document Posted
                     Processing (data packet) : No data
                    This Process runs for infinite time, then I have to kill that process from server, & Then It shows Caller 09 Error in Status Tab
                    Should I Changed the value for that memory parameter of server or not ?. We r planning to try it today, Is it really belongs to this problem, Will it be helpful ? What r the risks ?
                    Please, give your suggestion as early as possible, I m ewaiting for your reply.
Thanks,
Pankaj N. Kude

Call of API for IBase contains errors

Dear All,
We are using solution manager 4 with SP13.When i try to create a Ibase through Initiate Data transfer for ibase,i gives the following error.
Call of API for IBase contains errors
Message no. CRM_IB050
Diagnosis
No import data was entered for one of the function modules (APIs) for Installed Base Management. Therefore, the function cannot be executed.
System Response
The system terminates processing.
Procedure
If the APIs are called in customer-specific programs, check the call for the APIs and change the call accordingly.
Please help to proceed,
Regards,
Avinash.

Good day,
Had the same error and solved it by doing the following;
Go to t/code DNO_CUST01 and double click on SFL1 and make sure "number range" is 01 and "action profile" is SLFN0001_STANDARD_DNO.
Your number range interval in t/code CRMC_NR_RA_SERVICE should be consistant with NR details in t/code DNO_NOTIF (check note: 498984 to set it up)
Good luck.
Cheers
Anthony Cunha

Call of API for IBase contains errors Message no. CRM_IB050

Call of API for IBase contains errors
Message no. CRM_IB050
Diagnosis
No import data was entered for one of the function modules (APIs) for Installed Base Management. Therefore, the function cannot be executed.
System Response
The system terminates processing.
Procedure
If the APIs are called in customer-specific programs, check the call for the APIs and change the call accordingly.
Can anyone help me in the above issue.
Regards,
Mirza Kaleemulla Baig

Hi Sai,
This is too late to reply this post, but to let everyone know about the issue I am posting here.
Start new UI session and put breakpoint at BUPR_EMPLO_DELETE and check parameter IV_X_SAVE everytime, till you get the error message. The parameter IV_X_SAVE should be same/consistent (either ' ' or 'X') in whole Logical Unit of Work. It should not change in between.
I faced the same kind of problem and found that standard was passing IV_X_SAVE = ' ' and in our custom code we were passing IV_X_SAVE = 'X'. I changed it to IV_X_SAVE = ' ' and my problem got resolved.
You can try the same. Please post the alternate solution if you find it.
Best Regards,
Rahul Koshti

Attribute for user contains errors. Inform system admin

Hello,
We've got an issue with shopping carts created by a user that was deleted from system. When trying to see in Monitoring Shopping Carts header or item details of a given sc. A web error occurs:
The URL http://srp.srm.gruposalinas.com.mx:8000/sap/bc/gui/sap/its/bbpsc11/! was not called due to an error.
Note
The following error text was processed in the system SRP : Attribute for user contains errors. Inform system admin.
The error occurred on the application server srm-pro_SRP_00 and in the work process 2 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Form: OUTPUT_EXPRESS_MESSAGES of program SAPLBBP_SC_UI_ITS
Form: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
Module: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
We've cheked SAP NOTE 312058-BBPPU99: Error: Attribute for ... is missing. Inform ...
But it seems that none of the information applies to us, since this issue is only present for Shopping carts that were created by this deleted user.
So we tried to re-assing one of this sc, chaning PARTNER_NO,ADDR_NR
ADDR NP data in table CRMD_PARTNER according to a new given user, but it didn't work. So we need to know how to re-assing this sc or perhaps how to find what specific attribute is missing.
Any advice is welcome.
Thanks in advance.

Hi
Which SRM version are you using ? This is an SRM error message.
The manager role should be enough to change user attribute. The transaction is BBPATTRMAINT. Employee role should have BBPUM02 or BBPAT05 to change their own attribute.
Please check whether the User ID you are using to Log into BBP_PD (and seems to be assigned in the org structure also)is consistent and has no errors in tcode USERS_GEN. You should check the user, it's not set up properly in USERS_GEN Transaction, Else repair the user.
To maintain the user attributes you must have the Administrator role.. Your user should have role SAP_BBP-STAL_ADMINISTRATOR and be integrated in the org structure. your user must be integrated in SRM organizational structure. To see which attributes are missing, you can click on the user in PPOMA_BBP to see details, and go to last tab "Check". This will list all required attributes depending on used scenarios (so you may not require all of them). You can also use transaction BBP_ATTR_CHECK to check user's attributes for a particular scenario.
Please go through the following links as well ->
bbp_mon_sc attributes
Re: FM for attribute's value assignation in PPOMA ?
Note 751022 - Monitor Shopping Cart: Item deletion causes termination
Re: User Settings are not saved
Re: Not able to generate user users_gen
Re: SRM organization plan...
Re: User creation error
Hope this will definitely help. Do let me know.
Regards
- Atul

Error in BPM: "COMMUNICATION FAILURE" during JCo call. Error opening an RFC

hello experts
i am receiving the above error incase of BPM scenario where i am having a Transform step and synchronous RFC step.
i referred to the few threads discussing such problems and was trying to find whether my mapping is correct and i tested my mappings using my payload which looks good.
When looked into the Mapping trace of the BPM "Show container" i found error ""COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection" and it seems that when BPM is attempting to call interface mapping it is throwing this error.
Thanks in advance.
Regards
rajeev

hi,
I think no problen with the mapping part,
jco connection requird when xi try to stablish the connection with the adapter .
please look the link provided.
Setup and test SAP Java Connector outbound connection
please also check the following parameter at the exchange profile
com.sap.aii.rwb.server.centralmonitoring.r3.ashost
com.sap.aii.rwb.server.centralmonitoring.r3.client
com.sap.aii.rwb.server.centralmonitoring.r3.sysnr
com.sap.aii.rwb.server.centralmonitoring.httpport
these parameter must be given properly.
if every thing is ok than and problem still exist than try to restart the system.
for us after restarting its worked fine.
regards,
navneet

Import Container contains Error

Hi,
when i'm using in QAR, i didnt found any error in PO release strategy. But now, i'm facing the error Import container contains errors (are any obligatory elements missing?). I've checked workflow definition, it doesn't shows any error. And the import parameters are enabled.
If anyone knows what is the problem, kindly let me know what i have to do...

Hi,
check, wether there are some obligatory container elements, wich are not filled when calling the workflow.
The problem may be the data formats of the elements during runtime. If you try to assign elements, wich have different data-types may cause errors during runtime even the definition of the containers reports no problmes.

Caller 09 error message in bi 7?

Hi all,
I am getting an error in the pc " caller 09 contains error message:, i ran the abap program RSDS_DATASOURCE_ACTIVATE_ALL to activate the data source. but after i select the data source and ran the program i am still getting
There is no DataSource with these attributes
but there is a datasource in the system!!
Can anyone pls help me on this!!, and this error is on BI 7 system!!
Thanks
Pooja

Hi Hari,
For DS activation you can goto edit mode of DS & activate . It is not always necessary that you should run the program to activate the DS.
Also in which system you are running the program?
R/3 or BW system?? I hope since your source system is R/3, you will be activating it in R3 by running the program & in BW side, do it manually if you cant do it using the program.
Hope this should solve your problem.
Regards,
Pavan
Edited by: PavanRaj_S on Jul 5, 2010 2:27 PM

Contains errors and distribution lock

Hi all,
We have a error as "contains error, distribution lock"(system status)in the status of the service confirmation. Document is in Open status and with this error any changes are not replicating to the r/3. This is the only one document with such error. All other confirmations are getting replicated to R/3. Bdoc error segment for this confirmation is "NO upload into ERP,ERP adapter is called".
How can I remove this error? Any reports available to remove? what is the cause for this issue?
Thanks In Advance

Hi,
Please try to find the relevant bdoc in SMW01 . It is probably in intermediate status or there could be an error in the bdoc.
The must be a pending outbound queue or inbound queue in SMQ1 or SMQ2 in CRM.
One reason why the order is not uploaded properly can be due to filter settings in R3AC1 for object SALESDOCUMENT.
I.e. you would not allow to download the same document to CRM and therefore the complete loop is not run ok.
Please check R3ac1 as well.
If this is sill not helping please check as well the report CRM_ODE_CHECK_CFG (as per note 490932) and check if there might be obvious settings which might block the data transfer of this order type.
Best regards
Christophe

F4M document contains errors - URL missing from Media tag

I feel like I'm getting close to finally get a live stream to work correctly in 4.5
I can see the streams being recorded in the following directories
 C:\FMSHOME\applications\livepkgr\streams\_definst_\liveevent1
 C:\FMSHOME\applications\livepkgr\streams\_definst_\liveevent2
 C:\FMSHOME\applications\livepkgr\streams\_definst_\liveevent3
Each directory contains five files: bootstrap ,control, meta, f4f, and f4x.
I have a single file called Event.xml in the directory: C:\FMSHOME\applications\livepkgr\events\_definst_\liveevent
<Event><EventID>liveevent</EventID>
<Recording>
<FragmentDuration>4000</FragmentDuration>
<SegmentDuration>16000</SegmentDuration>
<DiskManagementDuration>3</DiskManagementDuration>
</Recording>
</Event>
However the client player receives the exception F4M document contains errors - URL missing from Media tag.
If this file is dynamically generated on the fly by the server what do I need to change to resolve this issue?
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
 codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab##version=10,0,0,0"
 width="600"
 height="409">
 <param name="movie" value="StrobeMediaPlayback.swf"></param>
 <param name="FlashVars" value="src=http://myserver/hds-live/livepkgr/_definst_/liveevent.f4m"></param>
 <param name="allowFullScreen" value="true"></param>
 <param name="allowscriptaccess" value="always"></param>
 <embed src="StrobeMediaPlayback.swf"
 type="application/x-shockwave-flash"
 allowscriptaccess="always"
 allowfullscreen="true"
 width="600"
 height="409"
 FlashVars="src=http://myserver/hds-live/livepkgr/_definst_/liveevent.f4m">
 </embed>
</object>
Thanks Again!
Dave

I will suggest you to go through this doc for complete implementation details. It is pretty comprehendable and would help you understand http live streaming better.
http://help.adobe.com/en_US/flashmediaserver/devguide/WSeb6b7485f9649bf23d103e5512e08f3a33 8-8000.html#WSd391de4d9c7bd609a95b3f112a373a7115-7ff6.
As per your questions -
1. "I try to access the stream using the local player at http://localhost/hds-live/livepkgr/_definst_/liveevent/livestream.f4m" - This should be http://localhost/hds-live/livepkgr/_definst_/liveevent/liveevent.f4m.
 The name of the f4m is the name of the event you are referring to. In your case, the live event - liveevent is associated with all your three livestreams- namely livestream1, livestream2. livestream3.
2. "Do I need to create BOTH a 'manifest.xml' and a 'event.xml'? And do both of these files need to be in the event directory like below?" - Yes. If you are using mbr you need both these files at the exact place you mnetioned.
For simple single bitrate streams, mainfest.xml file is optional.
3. "If I need to manually create a manifest.xml file would this file and directory be correct?" - Yes, you are right on track. Create the file Manifest.xml and place it inside events directory at the place you mentioned.
4. "Do I need to use a absolute url in the streamid field in manifest.xml to resolve the error msg 'The F4M document contains errors URL missing from Media tag'?" - No. This is not needed. StreamId is not the content path, that is taken care of by the url path in the output manifest. You streamIds will be - livestream1, livestream2, livestream3.
After all this, I would suggest you to check one more thing. If you are publishing the way you mentioned above, there would be '.stream' files (For eg - 'MTYxMjAzMzAzMg=.stream' ) created in your events folder - "C:\FMSHOME\applications\livepkgr\events\_definst_\liveevent\". You should check that there are 3 and only three files formed. It somehow happens that when you publish and republish again without deleting these files, FMS creates multiple copies and tries to map each one to the actual content written at - C:\FMSHOME\applications\livepkgr\streams\_definst_\livestream1\ etc.. So there should be three files and each one should point to one of the streams directory. If there are more, please delete these files, delete your hds streaming content (if possible) and republish again the same way.
This should solve your problem. If still you are facing some issues, do let us know.
Thanks,
Apoorva.

Transaction IDX1: Port SAPCP0 client , RFC destination contain errors

Hi Experts,
I am getting following error in SXMB_MONI in IDOC to JDBC scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>Transaction IDX1: Port SAPCP0, client , RFC destination contain errors</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Transaction IDX1: Port SAPCP0, client , RFC destination contain errors</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
i have created port in idx1 and i imported the idoc in idx2 and i have created rfc destination to R3 in XI, RFC destination is working fine.
Can anyone help me out of this.
Kind Regards,
Praveen.

hi,
>>><SAP:Stack>Error: Transaction IDX1: Port SAPCP0, client , RFC destination contain errors</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
>>>i have created port in idx1 and i imported the idoc in idx2 and i have created rfc destination to R3 in XI, RFC destination is working fine.
this means that you're checking an incorrect RFC dest
- open IDX1
- click on port SAPCP0
- double click on RFC dest which is over there to open it
- ctrl+F4
does it work?
Regards,
Michal Krawczyk

Error: Transaction IDX1: Port SAPRP1, client ,RFC destination contain error

Hi All,
I am faceing the problem while executing the XI ,
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Transaction IDX1: Port SAPRP1, client , RFC destination contain errors</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Transaction IDX1: Port SAPRP1, client , RFC destination contain errors</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
============
It is showing this error and the idoc is not posting to the SAP. When i checked out the IDX2 i am not getting any such structure of our IDOC type, So do i need to create the structure manually, or will it create automaticallywhen the idocs willposted .
Is there any import and export option for this.
Please treat this as urgent , thanks in advance...

Hi Jay,
how did you create port using IDX1 ,I think you must have to follow the naming convention there.Any user given name might not work.
I think in your case , create port as SAPRP1 using IDX1.
can you you give a try with that.port name exactly same as SAPRP1.
you may also refer this link
http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm

External transfer of PR ( PDP Scenario ) : Interface data contains errors

Dear All,
We are in SRM Server 5.5, Extended Classic.
Scenario >> Plan driven procurement
We have a purchase requisition generated via Plant Maintenence order. The PR is created for services and also has limits maintained ( overall and expected value ).
The PR is not getting transfered to the SRM.   However in SRM SLG1 we see error log :
Interface data contains errors
Message no. BBP_PD002
Please advice if you have faced similar issue.
Regards,
Anil Rajpal

Hello,
You can debug the PR transfer to find out why this error is coming.
1. Go to table EPRTRANS -> take the PREQ number.
2. Go to SE38 -> BBP_EXTREQ_TRANSFER -> F8 -> provide PREQ -> /h -> F8.
3. Go inside FM BBP_EXTREQ_TRANSFER ->
4. Go inside perform transfer_package ->
5. Go inside Perfrorm Send_pr_to_procsystem ->
6. Clear lv_qrfc = '' -> goto inside FM BBP_BC_EXTREQ_INB -> Here SRM will be called (maintain the RFC connection with dialog user. Then it will be able to debug onto SRM side).
Once logged onto SRM, put a breakpoint at FM BBP_PD_MSG_ADD. Here error will be triggered. If you go back some steps via call stack, you can see why this error appears.
Regards,
Ricardo

Call contained error(s): ADS (2)

Similar Messages

Maybe you are looking for