Call do not route to operator when users do not press any key
We have a new CUCM platform with Cisco Unity ver 9.1.2TT1.11900-2TT1.
We configured system handlers and and all "caller input" options runs good but when callers do not press any key the call goes to "nowhere", instead of going to Operator (default behavior).
Do you have any idea on what could be misconfigured here, or what should be configured to solve this problem??
Thanks a lot
Enrique
Sorry for my last "wrong answer" .....You (again) was right, I had a bad configuration on "after greeting" setting..i had:
"Call Action: Take message".
I changed to " User with Mailbox pointing to recepcionist VM.
Jaime thanks a lot.
Enrique Villasana
Similar Messages
-
CSCul66951 LDAP routing query fails when user name is the same (6 july 2014)
in the case CSCul66951 LDAP routing query fails when user name is the same it is mentionned that the version 8.0.2-055 correct this bug ? How come i don't see this version on my menu Available upgrades from my IronPort C370 ?
Is there someone on the support team that have try this LDAP query on a IronPort C370 with this version in the development lab ?
Do i have to open a support Case to have this version of AsyncOS ?
Best regards,
Benoit Belair
University of Quebec in MontrealYes - CSCul66951 - this was included w/ the 8.0.1-HP1, and is rolled into 8.5.6-074 GA release.
See release notes, resolved issues:
http://www.cisco.com/c/dam/en/us/td/docs/security/esa/esa8-0/release_notes/ESA_8-0-1_HP1_Release_Notes.pdf
CSCun02766 - 8.5.6-063, which was superseded by the 8.5.6-074 GA release.
See release notes, resolved issues:
http://www.cisco.com/c/dam/en/us/td/docs/security/esa/esa8-5-6/ESA_8-5-6_Release_Notes.pdf -
According to William Stanek, in his Windows Server 2012 R2 Inside Out: Configuration, Storage & Essentials book, this is apparently possible: (pg. 615 - here it is on Google Books: https://books.google.ca/books?id=0IyfBAAAQBAJ&pg=PT819&lpg=PT819&dq=read+operation )
Integrity can be enabled when the system is not running on Storage Spaces. When
integrity is enabled and ReFS detects a checksum mismatch, ReFS logs an event and
fails the read operation by default. If you don’t want the read operation to fail, you
can configure ReFS to continue with the read operation. A related event will be logged
regardless.
So then how do I configure it to do that???
(And just to make it super-clear, I'm NOT using Storage Spaces, so there is no redundancy via mirroring/parity, and I'm not expecting any file repair - just detection of corruption. It's just a basic volume formatted with ReFS and
with integrity streams enabled, via format E: /fs:ReFS /i:enabled
For those who want more details, here's the situation:
I try to perform a read operation on a file with corrupted data (purposely done for testing using a low-level disk editor), I get a the following error message:
And an event ID 133 from ReFSv1 gets logged in the System log:
Clicking "Try Again" just brings up the same message, and clicking "Skip" skips the operation entirely.
This is indeed the correct default behaviour.
What I want instead is for the read operation to be allowed to complete, with corrupt data and all, and ONLY for the event to be logged. And according to William Stanek, this is supposed to be configurable somewhere - and after hours of searching, I haven't
been able to find anything.Hi Tommy,
>>How can I configure ReFS to NOT fail read operations when a checksum error is detected
We can use PowerShell command Set-FileIntegrity to configure this. The specific parameter for controlling this behavior is
-Enforce <Boolean>which indicates whether to enable blocking access to a file if integrity streams do not match the data.
Regarding this point, the following article can be referred to as reference.
Set-FileIntegrity
https://technet.microsoft.com/en-us/library/jj218351.aspx
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
When I turn on my iMac, it shows a black screen and says 'No bootable device - enter boot cd and press any key'.
I'm not sure what to do, I did not recieve a cd with my mac to boot it up (I ordered it online).
Also I can't find my harware serial number (I've tried many times to input what I thought it may be from my receipt). I saw that I need this number to contact apple support, my 90 day complimentary support is still valid so I wish to contact them.
I don't know much about apple products as this is my first apple computer so any information is helpful.Hold down the Alt/Option-key at startup of your iMac to get the Boot Selection screen.
From that choose to boot into OSX.
Once in OSX go to System Preferences then Startup Volume and reset your OSX to be the default.
The new iMacs have OSX 10.7 Lion preinstalled and don't come with any CD/DVD anymore.
Instead OSX Lion includes a new feature called "Lion Recovery".
Have a read here About Lion Recovery
Stefan -
"Press any key to mute ringtone" feature = never hear calls when in the car. Any fix?
Is there any way to turn it off?
I keep my Centro in a belt case this is always clipped to my belt while riding in the car.
It's a very nice, rugged case I picked up that is the perfect size, but the keys easily get bumped while I'm driving.
So, when a call comes in it will only ring for a 1/2 second before one of the keys gets bumped and silences the ringtone. It's really annoying to not even know that anyone called me until I check the Centro for some reason.
Is there any way to disable the "press any key to mute ringtones" feature? Any setting / hack / tweak / etc?
Post relates to: Centro (AT&T)
Message Edited by NoahB on 02-06-2009 12:37 PMHello and thank you for using the Palm Help Forums!
Unfortunately there isn't a way to disable this feature. However, you can probably look into a car kit/ clip so you can slip the device on your car in an easy to reach position. Another alternative would be to take the belt like and clip it on your sun visor for a temporary fix.
I'm sorry I wasn't able to completely resolve it but I hope my advice helps. Let me know if there is anything else I can assist you with.
-Pat
Post relates to: Treo 800w (Sprint) -
I am unable to start up my iMac running on 10.4.11 - the startup disk is installed and will not start up eben when I hold down the "C" Key. I do get the apple, but then it disappears.
Query by serial number
Apple's warrenty database will identify the type of Mac you have. Your serial number is securely sent, but you get only the name of your machine.
https://selfsolve.apple.com/agreementWarrantyDynamic.do
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer ) -
I have accidently shut down my Mac Book Pro during windows 7 installation . When I re started it it began to say " Press any key to boot from CD or DVD " but the keyboard is not working . So I cannot boot It and the CD is also in the drive . Please help me to boot back to Mac book Pro and give me a way to start the key bord .
Hey rudreshchoubey,
Thanks for the question. The following resource may help to resolve your issue:
Boot Camp Installation & Setup Guide
http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
If Windows doesn’t install properly
Verify that you’re using an original, full version of the 64-bit version of Windows 7 Home Premium, Windows 7 Professional, Windows 7 Ultimate, Windows 8, or Windows 8 Pro.
Restart your Mac and hold down the Option key until one or more disk icons appear on your screen. Insert the Windows installation disc into the optical drive or insert the USB flash drive with Windows into a USB port on your Mac. Select the Windows installation disk icon, then click the arrow beneath it. Quickly press any key on your keyboard to start the installer. Follow the onscreen instructions to repair or reinstall Windows.
Thanks,
Matt M. -
I have just updated my MBP 17 / retina display to Maverick OS. I am unable to shutdown or log off. When i press the shutdown button, a black screen appears which goes off on pressing any key. The shutdown or log off dialog does not appear. Your kind help is much appreciated.
The button response has changed.
Short press : sleep
Medium press (2-3 sec) : restart, shutdown, sleep dialog
Long press : force shutdown. (Same as before) -
PC would not load. Message: "no bootable device-- insert boot disk and press any key"
I encountered this problem two days ago. When I turn on my laptop( model: Satellite L305-S5933) I receive this message:
Intel UNDI, PXE-2.1 (build 082)
Copyright © 1997-2000 Intel Corporation
For Realtek RTL8101E/8102E PCI-E Ethernet Controller v1.05 (071227)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
No bootable device -- insert boot disk and press any key
I went into set up utility(F2) and the boot order I tried setting it to default which is:
1. HDD(S1)
2. FDD
3. CD/DVD
4. LAN
5. USB Memory
I do not have a recovery disk. What should I do? Do I need a new hard drive or something? Help!Good morning,
I am having the same problem with my daughter's laptop. It is a satellite C655D-S5518. Serial #2C231282Q and part # PSC0YU-032029.
I have tried all suggested options above but still no luck. When I hold the zero key and turn on the computer it just beeps and won't go into the recovery screen. My 9 year old daughter saved up to buy this with her own money in May 2012 and when I called the tech support I was told to have my credit card ready to pay for phone support.
I shouldn't have to pay for support two months after purchase...
Please help! -
Boot Camp not installing Windows 7 - "No bootable device, insert boot disk and press any key."
I need some help with something. A while back, I put a brand new hard drive in my MacBook, a 500 GB model to replace the 120 GB one. I cloned everything successfully to the new drive via Carbon Copy Cloner, but now I want to make a Boot Camp partition on the drive. The SuperDrive in it is defective, so I use an external FireWire drive. So far the Boot Camp Assistant in 10.7 Lion works fine in creating the partition, but when it gets to the part where it tries to boot into the Windows installation disk (32-bit Windows 7 Home Premium, or could the 64-bit work fine as well?), it shows a black scree nwith "No bootable device, insert boot disk and press any key." I try pressing keys, but nothing happens.
I also tried using rEFIt, but that didn't work out either.
Here are the specifications of my machine...
MacBook (Early 2009 model)
2.0 GHz Intel Core 2 Duo processor
4 GB of RAM
500 GB SATA hard drive
Dual-layer SuperDrive (defective, may replace it once I have the cash)
NVIDIA GeForce 9400M graphics chip
Mac OS X 10.7.2 Lion
Can anyone help me out with this? Is there some sort of workaround?Wiley207 wrote:
Believe it or not, it was the FireWire drive that was the problem! I managed to successfully install Windows 7 using an external USB DVD drive!
Well I am truly staggered, I have tried this on two different MacBook Pros, with three different external USB optical drives. Don't know if you googled as I suggested but you would find hundreds of others who have found same thing. The exception is MacBook Air which works with the Apple writer, but I don't know much about this.
Were you doing any of the special workarounds with refedit etc?
What model USB DVD drive? -
Compaq PresarioCQ60 with Windows Vista-
my computer will not load. I get gthe same error message no matter what I try- "No bootable device- insert boot disk and press any key". My computer is 5 years old and I no longer have the original disc used for the first time set-up. Should I buy a new disc or is my computer fried?I believe it is you hard drive that has a problem. Have a computer person check the hard drive out and see if they can get it going again. It could just be file corruption and by attaching it to a desktop machine as a 2nd drive and running a check disk on it, they may be able to get it going. The key questions are if the drive still spins, weather the bios can recognize the drive and if the drive is operating within normal parameters. If the drive is OK, you have a good chance that they can fix the software.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster. -
Press any key... help! the usb keyboard is not recognized and I cannot reboot
Hi,
I really hope that one of you can help me. I had used boot camp once on my MacBook Pro so, I did not think to plug a USB keyboard on my son's iMac before starting the installation process. As a result, when I am asked to press any key, I am stuck. Obsviously I could not reboot so I unplugged the iMac hoping that it would come back to OS and give me a chance to have the USB keyboard installed and recognized before going back to the installation. Unfortunately, rebooted and went directly to where I was at.
Thank you for your helpI would restore the iPod to factory defaults/new iPod on your computer and start over. It appears the iPod is associated with another account. Any media that came with the iPod does not belong to you and di not transfer with the iPod hardware.
-
ok i get this error when hooking my dvd drive up and tring to use my windows 7 cdNo Bootable device. Insert boot disk and press any key. i have tried to use command key i see the cd icon and hit that and i get the error
Wiley207 wrote:
Believe it or not, it was the FireWire drive that was the problem! I managed to successfully install Windows 7 using an external USB DVD drive!
Well I am truly staggered, I have tried this on two different MacBook Pros, with three different external USB optical drives. Don't know if you googled as I suggested but you would find hundreds of others who have found same thing. The exception is MacBook Air which works with the Apple writer, but I don't know much about this.
Were you doing any of the special workarounds with refedit etc?
What model USB DVD drive? -
I deleted the folder System en Macintosh HD and now when i on my mac it says Disk Error Press Any Key To Restart Please HELP !!
Reinstall Mac OS X.
(59450) -
After trying to install Windows 7 in my new iMac It will not boot up back to Apple. I have a black screen with the following "No bootable device -- insert boot disk and press any key". My iMac did not come with a boot disk. What can I do?
Try holding down the option/alt key during a restart and see if you can see/select your boot drive there.
Maybe you are looking for
-
EPS files from CS5.5 to QuarkXPress 9
I am trying to help someone working in a PC-only environment. Using InDesign CS5.5, we do Export as EPS and specify Level 2 (or 3, made no difference) PostScript, Grayscale and Binary. If then create a new document in QuarkXPress 9, draw a picture bo
-
TS3276 When I receive email my husbands name is in the to: box. How do I make it my name
When I receive email my husbands name is in the to: box. How do I make it my name
-
Switching, quick question about garageband
ive used garageband before so i know some basics but one thing i never tried or thought of was editing mp3s or mp4as. could i open an existing song from my library and add layers to it, beats and all that stuff to in a way "remix" the song?
-
Integrating CS pages in to existing site
Hi I am working on an existing site, where we want to make available a couple of new pages that are been fed up from the content server. The documents in the cs are been translated correctly to html via the templates we define in Site Builder. Howeve
-
Failed to downlaod error 0x8024600C
Tyring to downlaod the new techincal preview build Nov 2014, and I am getting the following error: Failed to download the new preview build, please try again later 0x8024600C Any idea what wouldbe causing this?